Application putty cannot be launched on this device.

Hi
I'm using
Microsoft Forefront Unified Access Gateway
to access a VPN
I get the following when invoking a link once on the site:
SSL Application Tunneling
Application putty cannot be launched on this device.
I have PuTTY but suspect it's not as simple as that ... should PuTTY be in my Program Files? But one doesn't install it per se, i.e. from an executable.
Best regards
Martin
Martin Peter Clarke

Hi,
Could you launch the other application without a problem?
You could have a look on the thread below.
http://social.technet.microsoft.com/Forums/forefront/en-US/e5dc201e-c76a-412c-9de1-e3a1e397168a/publishing-telnet-through-a-uag-https-trunk?forum=forefrontedgeiag
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

The application "whatever" cannot be launched. -10810 Getting this error.

On Friday, I ran into a issue where I can't launch new programs from the dock.
When I try to launch something, it gives me an error message. The application "Firefox" cannot be launched. -10810.
I end up having to reboot the whole computer. Then I can start programs again.
But after half an hour, the issue is back and I am getting the error again.
I am typically running Mail, Safari 3.1, Parallels, newest Firefox and Adium (newest version).
I can't really relate it to any specific single program that is causing the problems.
What does that error message mean?
Anyone have any ideas?
I already installed the new firmware update today, hoping that would magically fix it. But it didn't help.
I have all the latest apple updates for the computer installed, and Leopard.
Help, anyone?

I went into console, and there were hundreds of these messages:
3/31/08 4:19:00 PM Mail[631] lexer results overflow
Then, below all that, I get this:
3/31/08 4:21:03 PM com.apple.launchd[72] ([0x0-0x134134].com.apple.AddressBook.sync) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 4:21:03 PM com.apple.launchd[72] ([0x0-0x134134].com.apple.AddressBook.sync) Bug: launchdcorelogic.c:6483 (23459):35: jr->p
3/31/08 4:26:12 PM com.apple.launchd[72] (com.apple.PreferenceSyncAgent) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 4:26:21 PM UserEventAgent[144] CalAlarmAgent :: WARNING: could not launch iCal Helper
3/31/08 4:26:21 PM com.apple.launchd[72] ([0x0-0x135135].com.apple.iCal.helper) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 4:26:21 PM com.apple.launchd[72] ([0x0-0x135135].com.apple.iCal.helper) Bug: launchdcorelogic.c:6483 (23459):35: jr->p
3/31/08 4:27:56 PM org.cups.cups-lpd[661] launchproxy[661]: /usr/libexec/cups/daemon/cups-lpd: Connection from: 192.168.0.198 on port: 1155
3/31/08 4:28:15 PM com.apple.launchd[72] ([0x0-0x136136].com.apple.AddressBook.sync) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 4:28:15 PM com.apple.launchd[72] ([0x0-0x136136].com.apple.AddressBook.sync) Bug: launchdcorelogic.c:6483 (23459):35: jr->p
3/31/08 4:28:46 PM org.cups.cups-lpd[667] launchproxy[667]: /usr/libexec/cups/daemon/cups-lpd: Connection from: 192.168.0.196 on port: 2484
3/31/08 4:32:26 PM com.apple.launchd[72] ([0x0-0x138138].com.apple.AddressBook.sync) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 4:32:26 PM com.apple.launchd[72] ([0x0-0x138138].com.apple.AddressBook.sync) Bug: launchdcorelogic.c:6483 (23459):35: jr->p
3/31/08 4:41:30 PM com.apple.launchd[72] ([0x0-0x13a13a].com.apple.AddressBook.sync) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 4:41:30 PM com.apple.launchd[72] ([0x0-0x13a13a].com.apple.AddressBook.sync) Bug: launchdcorelogic.c:6483 (23459):35: jr->p
3/31/08 4:42:34 PM com.apple.launchd[72] ([0x0-0x13b13b].Microsoft/com.microsoft.Messenger) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 4:42:34 PM com.apple.launchd[72] ([0x0-0x13b13b].Microsoft/com.microsoft.Messenger) Bug: launchdcorelogic.c:6483 (23459):35: jr->p
3/31/08 4:42:47 PM com.apple.launchd[72] ([0x0-0x13d13d].Microsoft/com.microsoft.Messenger) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 4:42:47 PM com.apple.launchd[72] ([0x0-0x13d13d].Microsoft/com.microsoft.Messenger) Bug: launchdcorelogic.c:6483 (23459):35: jr->p
3/31/08 4:43:10 PM com.apple.launchd[72] ([0x0-0x13f13f].org.mozilla.firefox) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 4:43:10 PM com.apple.launchd[72] ([0x0-0x13f13f].org.mozilla.firefox) Bug: launchdcorelogic.c:6483 (23459):35: jr->p
3/31/08 4:45:19 PM FileSyncAgent[157] MKCOL /.FileSync (FAILED), httpStatusCode:405, errorType:100, transactionState:5, txnId:8B4BF403-F180-4183-BAB2-FC7D9CAA7356, auto-retries=0, manual-retries=0
3/31/08 4:47:59 PM org.cups.cups-lpd[678] launchproxy[678]: /usr/libexec/cups/daemon/cups-lpd: Connection from: 192.168.0.198 on port: 1516
3/31/08 4:48:46 PM org.cups.cups-lpd[684] launchproxy[684]: /usr/libexec/cups/daemon/cups-lpd: Connection from: 192.168.0.196 on port: 2575
3/31/08 4:48:46 PM firefox-bin[683] An uncaught exception was raised
3/31/08 4:48:46 PM firefox-bin[683] couldn't fork: errno 35
3/31/08 4:48:46 PM firefox-bin[683] * Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'couldn't fork: errno 35'
3/31/08 4:48:46 PM firefox-bin[683] Stack: (
2450387531,
2447470843,
2450386987,
2450387050,
2423494429,
2423491241,
50670,
11283,
22781,
10488,
10366,
10137
3/31/08 4:48:46 PM com.apple.launchd[72] (com.apple.ReportCrash) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 4:48:46 PM com.apple.launchd[72] (com.apple.ReportCrash) Throttling respawn: Will start in 10 seconds
3/31/08 4:48:56 PM com.apple.launchd[72] (com.apple.ReportCrash) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 4:55:10 PM loginwindow[34] Could not find image named 'NSApplication'.
3/31/08 4:55:10 PM com.apple.loginwindow[34] 2008-03-31 16:55:10.886 loginwindow[34:20b] Could not find image named 'NSApplication'.
3/31/08 4:55:10 PM loginwindow[34] Could not find image named 'hgfhfg'.
3/31/08 4:55:10 PM com.apple.loginwindow[34] 2008-03-31 16:55:10.888 loginwindow[34:20b] Could not find image named 'hgfhfg'.
3/31/08 5:08:02 PM org.cups.cups-lpd[694] launchproxy[694]: /usr/libexec/cups/daemon/cups-lpd: Connection from: 192.168.0.198 on port: 1822
3/31/08 5:08:50 PM org.cups.cups-lpd[699] launchproxy[699]: /usr/libexec/cups/daemon/cups-lpd: Connection from: 192.168.0.196 on port: 2681
3/31/08 8:26:47 PM com.apple.launchd[72] (com.apple.syncservices.SyncServer) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 8:26:47 PM com.apple.launchd[72] (com.apple.ReportCrash) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 8:26:47 PM com.apple.launchd[72] (com.apple.quicklook) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 8:26:47 PM com.apple.launchd[72] (com.apple.PreferenceSyncAgent) fork() failed, will try again in one second: Resource temporarily unavailable
3/31/08 8:26:47 PM com.apple.launchd[72] (com.apple.netauth.useragent) fork() failed, will try again in one second: Resource temporarily unavailable
So does that mean that Mail is hanging on something and causing all of the problems?
Any ideas?
Lars

Adobe Acrobat Profesional Cannot Be Launched At This Time

I keep getting the following error message,
Adobe Acrobat 8 Professional cannot be launched at this time. You must launch atleast one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional
Any ideas?

The problem seems to originate from the 8.1 update. I only have a two users on Acrobat 8 installed with the Creative Suite 3 Design Premium package. One user installed the 8.1 update two days ago and began to get the same error message as most reported here about having Photoshop running the first time he tried to open a PDF. The other has not installed the update and has not had the error or quitting problem. I tried MarkATS' solution, but when I entered our TLP (volume license) serial number for the Creative Suite 3 DP it was rejected by Acrobat. I had to enter a TLP serial specifically for Acrobat 8 which I fortunately had available. I am running the Acrobat 8.1 update, but originally installed from volume licensing media for Acrobat 8 with the aforementioned serial number. The update has worked fine with no problems for me. Thus the problem only seems to be with the suite product. It appears the update may have hindered the application's ability to recognize the Suite registration data.

Adobe Acrobat 8 Professional cannot be launched at this time.

Hi
So i've trying to deploy CS3 Design Standard in our enterprise environment. And one of the deployments, requires that i have to deploy ONLY the Adobe Acrobat Professional component of the CS3 package.
I run the install, and untick Photoshop, Illustrator, Indesign etc......so JUST leaving Adobe Acrobat Professional. It installs fine, along with the Shared Components etc.
But when i run Adobe Acrobat Professional, it pops up saying:-
Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional.
Now, as you can see i can't launch another suite component, as i've chosen not to install them. I'm assuming this is required so it can "register" itself. If this is working "by-design" then why does it let me install Adobe Acrobat Professional by itself, if i can't run it????

Simon = The rest of the CS3 package works great in a ThinApp package, doesn't seem to be any performance difference between install types. Plus you have the advantage of no extra registry keys or dll's floating into your system.
Peter = Thanks for the helpful comment, really helps me with this issue. And how is my installation of the product not "as designed".
Adobe give you the option of JUST installing Adobe Acrobat Professional, so if they allow this, surely it's BY DESIGN! The fact it doesn't work by itself means that Adobe should change their design to state the fact you need to install another suite product to allow it to work.
I've also tried packaging a standalone copy of Acrobat Reader Professional using VMWare ThinApp, but it does not work. And i've no problem with this, theres no real way to virtualize a device (i.e the Adobe PDF printer) so i'm fine with that.

Adobe Acrobat 8 Professional cannot be launched at this time - why?? Pls help!

Everytime I open a pdf I get the following message...
"Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional".
What does this mean?
I don't have Photoshop. Does that mean I need to get it to be able to look at pdf's?
Is there anything I can just download without having to buy it?
I have also just downloaded Adobe Reader 9.0, if that info helps?
Please help, I need to work on a pdf for work due tomorrow!!

Hello,
When you try to open Adobe Acrobat 8 Professional, the application returns the error "Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional."
Please try to do one of the following solutions:
* Open another Creative Suite 3 application first.
*Open any other Creative Suite 3 application and follow the on-screen instructions to enter a serial number and activate your software. Then open Acrobat 8 Professional.
But if you have MAC OS - Move the Acrobat, Adobe PCD, and Adobe PDF folders.
Quit any Adobe applications that are open.
In the Finder, navigate to /Library/Application Support/Adobe.
Note: This folder path refers to the Library folder at the root level of the startup disk, not the Library folder that is inside a user's Home folder.
Move the following folders to your Documents folder or another safe location:
Acrobat
Adobe PCD
Adobe PDF
Important: Do not delete these folders.
4. Open Acrobat 8 Professional.
5. Enter your serial number when prompted.
Hope this one could help.

I get the message "The application "Finder" cannot be launched. -600 Read

For the last couple of days my G5 was not shutting down, so had to hold in front power button, manual sleep sometimes refused to wake and applications failed to quit. and yesterday i got the following error.
I get the message "The application "Finder" cannot be launched. -600
A reboot got things working for a bit, but on opening 'TextEdit' a document that had locked up before the reboot was displayed, on trying to save the file 'TextEdit' locked up again, trying to do a 'Preview' 'Grab' of the screen worked but then locked up 'Preview'.
So i booted into 'Safe Boot' logged in, did a virus scan using ClamXav just for piece of mind.
I opened 'TextEdit' and the same document opened as before yet i still could not save it. So i rebooted.
After reboot i opened 'TextEdit' and again the previous document appeared and this time i was able to save it. And so far no apps have failed to open or quit.
My question is, i know prior to booting into 'Safe Boot' the system fixes somethings, what does it 'fix'?
I did run the ASD (not the AHT) disk and all was ok, so thought it should be a software issue, on running TechTool Pro4 i did notice 'Finder' errors which i set to fix (just opened TechTool Pro4 and it has locked up but did 'Force Quit' unlike 'TextEdit' which has just failed to even 'Force Quit')
On looking in on the 'Console Messages' i have seen as below:
01/11/2009 09:07:44 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
01/11/2009 09:07:44 com.apple.launchd[1] (com.apple.RemoteDesktop.PrivilegeProxy) Unknown key for boolean: EnableTransactions
01/11/2009 09:07:44 com.apple.launchd[1] (com.apple.usbmuxd) Unknown key for boolean: EnableTransactions
01/11/2009 09:07:44 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
01/11/2009 09:07:44 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
01/11/2009 09:07:44 com.apple.launchd[1] (org.x.privileged_startx) Unknown key for boolean: EnableTransactions
01/11/2009 09:08:10 com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 5 seconds
01/11/2009 09:08:11 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[89]) Exited: Terminated
01/11/2009 09:08:11 com.apple.launchd[99] (org.x.startx) Unknown key for boolean: EnableTransactions
01/11/2009 09:08:23 SystemUIServer[118]
MenuCracker
see http://sourceforge.net/projects/menucracker
MenuCracker is now loaded. Ready to accept new menus. Ignore the failure message that follow.
01/11/2009 09:08:23 SystemUIServer[118] failed to load Menu Extra: NSBundle </Library/PreferencePanes/MenuMeters.prefPane/Contents/Resources/MenuCracker.me nu> (loaded)
01/11/2009 09:08:23 SystemUIServer[118] MenuCracker: Loading 'MenuMeterCPUExtra'.
01/11/2009 09:08:24 SystemUIServer[118] MenuMeterCPU loaded.
01/11/2009 09:08:24 SystemUIServer[118] MenuCracker: Loading 'MenuMeterMemExtra'.
01/11/2009 09:08:24 SystemUIServer[118] MenuMeterMem loaded.
01/11/2009 09:11:49 [0x0-0x11011].org.mozilla.thunderbird[219] Warning: unrecognized command line flag -psn069649
01/11/2009 09:12:05 [0x0-0x12012].com.apple.Safari[220] Debugger() was called!
01/11/2009 09:51:25 com.apple.launchd[1] (0x10b500.mdworker[112]) Exited abnormally: Segmentation fault
01/11/2009 09:51:33 com.apple.launchd[1] (0x10b500.mdworker[290]) Exited abnormally: Segmentation fault
01/11/2009 10:31:38 com.apple.launchd[1] (0x10b500.mdworker[291]) Exited abnormally: Segmentation fault
01/11/2009 10:31:38 com.apple.launchd[1] (0x10b500.mdworker[291]) Exited abnormally: Segmentation fault
01/11/2009 10:39:08 com.apple.ATSServer[407] FODBError: FODBRemoveFromAnnex - Got called to remove an annexIndex that does not match what is in the font
01/11/2009 10:39:08 com.apple.ATSServer[407] FODBError: FODBRemoveFromAnnex - Got called to remove an annexIndex that does not match what is in the font
01/11/2009 10:39:34 com.apple.ATSServer[407] FODBError: FODBRemoveFromAnnex - Got called to remove an annexIndex that does not match what is in the font
01/11/2009 10:39:34 com.apple.ATSServer[407] FODBError: FODBRemoveFromAnnex - Got called to remove an annexIndex that does not match what is in the font
01/11/2009 12:24:17 com.apple.launchd[1] (com.apple.smb.server.preferences) Throttling respawn: Will start in 10 seconds
01/11/2009 12:37:07 com.apple.launchd[99] ([0x0-0x2b02b].com.micromat.TechToolPro4[634]) Stray process with PGID equal to this dead job: PID 635 PPID 1 TechTool Pro 4
01/11/2009 12:37:07 com.apple.launchd[99] ([0x0-0x2b02b].com.micromat.TechToolPro4[634]) Stray process with PGID equal to this dead job: PID 635 PPID 1 TechTool Pro 4
I have an image on a firewire caddy (which has 10.5.8 bootable on it) so i can easily erase the boot drive and image back but i want to understand what is actually happening.
Is it worth running AppleJack 1.5 or similar?
You advice is appreciated.
Message was edited by: da RayMan
Message was edited by: da RayMan

Hi there,
My question is, i know prior to booting into 'Safe Boot' the system fixes somethings, what does it 'fix'?
In Tiger/10.4.x it disables Startup/Login Items, clears Font Caches, tries to repair the HD. loads Safe Drives, disables Airport & Quartz.
In Leo/10.5 it does more, but doesn't disable Airport, which now has a Sfe Driver I presume.
I suspect From the Console post that perhaps SAfe Boot repaired the HD, but of course that doesn't take care of any corruption done while it was muxed.
Run Disk Utility & Verify the HD, it at least will tell us something.
Is it worth running AppleJack 1.5 or similar?
Assuredly, AppleJack is great & won't hurt, & will eliminate a lot of questions if not the problem.

The application "iTunes" cannot be launched. -600

Suddenly my iTunes refuses to launch. It just sits in the dock like it is running, but no window. And if I try to Force Quit it, it remains in the dock.
If I try to launch iTunes again, it gives me an error: *The application “iTunes” cannot be launched. -600*
Not really useful.
I don't have that Intego something installed that could give this error. I tried installing the 10.5.1 update downloaded from apple.com. I repaired permissions several times. Moved all iTunes prefs out of Preferences. Renamed the iTunes folder in ~/Music. Downloaded and installed iTunes.
Still no go.
But then, just as Im writing this. I realize I have an iPod Shuffle sitting in its dock, connected to my iMac. I just tried unplugging it, and of course iTunes starts right away. Whod've thunk?
Looking through Console. I did find this:
*20/11/07 23.53.19 kernel comapple_driveriPodSBC::setPowerState(0x5da7b00, 3 -> 4) timed out after 100129 ms *
I hope this can help some others.

Suddenly my iTunes refuses to launch. It just sits in the dock like it is running, but no window. And if I try to Force Quit it, it remains in the dock.
If I try to launch iTunes again, it gives me an error: *The application “iTunes” cannot be launched. -600*
Not really useful.
I don't have that Intego something installed that could give this error. I tried installing the 10.5.1 update downloaded from apple.com. I repaired permissions several times. Moved all iTunes prefs out of Preferences. Renamed the iTunes folder in ~/Music. Downloaded and installed iTunes.
Still no go.
But then, just as Im writing this. I realize I have an iPod Shuffle sitting in its dock, connected to my iMac. I just tried unplugging it, and of course iTunes starts right away. Whod've thunk?
Looking through Console. I did find this:
*20/11/07 23.53.19 kernel comapple_driveriPodSBC::setPowerState(0x5da7b00, 3 -> 4) timed out after 100129 ms *
I hope this can help some others.

Lumia 930, video cannot be viewed on this device

Re: Lumia 930
Dear Sir/Madam,
I have signed up for an expensive contract for above metioned phone couple of days ago, I am very disapointed now that I cannot watch NINEMSN site videos! and I get message " We're sorry, the video you are loking for cannot be viewed on this device" I need to use the phone mostly for this purpose only, if I can't use it then it will be useless and rest of my family members using iphone and android phone and they are able to view all videos from NINEMSN site.
Can I please have a resolution for this issue ASAP?
Thank you
vckumar

Good day, vckumar. Welcome to the Microsoft Mobile Community! Are you able to view videos from other websites aside from ninemsn? I supposed you're using the phone's Internet Explorer app to access this site, right? Does this happen whether you're using the desktop or mobile version of the browser which can be changed under Settings > swipe to applications > Internet Explorer > Website preference? Does the phone require anything that needs to be installed on it for you to be able to watch videos from ninemsn like Flash player? Note that Lumia devices don't support Flash player. Instead, they use HTML5 when playing web media files.
You can also check if there are apps in the Store that will allow you to play videos from ninemsn. Click here: WP - ninemsn.
We'll wait for your feedback.

"Cannot send email from this device"?

I recently purchased the Easy Release App from the ITunes store and when I try to email the release to my email address it says "Cannot send email from this device". Is it the app that is preventing the sending or is it something to do with the iPod? I've tried sending an email from the iPod to see and it is sent fine from the iPod but the app still won't send from the iPod.
Has this ever happened to someone else? Do I have to change settings on my iPod?
I have the IPod 4th generation if that helps

I had the same problem. You have to go into Settings in your ipod touch, scroll down and find "mail, contacts, calendars." Set up your email in there. It will give you a list I.e. yahoo, hotmail, gmail. After you've dont that you'll be able to sent the model release.

Adobe Bridge CC cannot obtain files from this device.

I am getting this error message when I attempt to upload videos to my Mac from my Canon 7D:
Adobe Bridge CC cannot obtain files from this device. Please be sure the device is properly plugged in and the battery is full charged.
Battery is full charged and camera is connected properly. I have restarted the camera, Bridge, and the computer as well. I tried reinstalling Bridge and it allowed me to upload 3 of the video files. Then the error message came back. There were a few RAW images on the camera that I was able to upload, but when I tried the video again I got the error message. I read a post about renaming the folder that you are saving to as a fix. I tried that as well, but it did not work.
Any help would be greatly appreciated! Thanks!
-J

This excerpt is from a long-gone post by author Bruce Fraser:
Bruce Fraser - 4:17pm Jun 14, 04 PST (#5 of 21) Opening files directly from the camera is a bad idea for a variety of reasons*, and it most certainly isn't faster than using a FireWire or USB2 card reader.
        • Drains the camera battery
        • Runs the risk of the software you're using to open the images writing to the card and destroying the format
        • Runs a small but significant risk of USB power frying the camera
• runs the risk of wearing out the camera's connector,
• Slowest method known to mankind of getting images off a CF or SD card

Your iPad is already active on a subscription plan that cannot be managed on this device

Help?
I got the new Verizon Ipad a few weeks ago and just now attempted to activate the 4g service. The first few attempts resulted in an error message related to my SIM card (something to the effect that it had already been in use or something). After calling Verizon and taking the card out, running through a script, and putting it back in, we eventually got it to the point where we could connect to the 4G service and that specific SIM card error message went away. However, now I am getting this error: "Your iPad is already active on a subscription plan that cannot be managed on this device". I called and talked to another rep who said they are experiencing this issue with a number of Ipads and she was submitting a ticket for me to get the error "cleared out". She said it could take a week?
When I go in and click "View Account" I either get this error message above or I get a brand new registration window to start all over again. Then immediately the "LTE" goes away in the upper left, it starts searching again, eventually finds the signal, and I get a popup saying "cellular data plan has been activated" or something to that effect. Then I am good to go.
Anyone dealing with this and have it cleared up? They are acting like its something in their system that will just go away on its on but I don't buy it. I am getting the service so I am just trying to get the "view account" functionality to work. Thanks all.

I had the same problem activating. I had gotten one error message when trying to activate. I didn't write the phone number down. I tried "View Account" again and then it started giving the error about the SIM card already being set up on an account. When I called that Verizon number the guy said I would need to go to a VZW store and get a new SIM card, but he did see the account in their system.
A while later I decided to just restart the iPad and I started getting the original message that just said it couldn't activate right now and to try again later. It provided a different phone number, which is the Verizon mobile broadband support number. When I called it the lady knew exactly what to do. She said the payment to the credit card hadn't gone through and she would have to push it through manually (this sometimes happens with certain credit cards when they see new online cellular service). She had me go to settings / reset / and to reprovision the account and reboot while she did some things on her side. When it came back up it was able to activate and the LTE even showed up. I also checked my credit card online and it only showed the $20 charge (for 1 GB Plan).
However, as you stated, when I go to "View Account" it says that the iPad is already active on a subscription that cannot be managed on this device and gives the mobile broadband support number. I will wait a few days and see if it clears up on its own, but at least the data is working.

Adobe Bridge cs5 cannot obtain files from this device.

I download photos to my computer using a Kingston downloading device.
Since installing Mavericks the above message comes up and will not carry out the download.
Is this a known problem with Mavericks and is there a remedy?
I would say that using the same device my photos download perfectly on my MacBook Pro.
Messages
1. Adobe Bridge CS5.1 cannot obtain files from this device.
Please ensure that the device is connected properly and that the battery is charged and try again.
2.I also get a message telling me that the "disk was not ejected propery" which is not the case.

Thanks Eric
The MacBook Pro is not running Mavericks and sorry about the double post.
I have actually solved the problem and the answer might be of use to others with the same problem.
There is a firmware update that will correct the problem.
It's at
http://www.kingston.com/en/support/technical/products?model=fcr-hs3
There is a small catch in that the firmware update can only be done on a Windows machine but I have been told that once this is done it can be used with OSX9 .I have just done the download but I haven't checked this out yet.

Adobe Epic_App cannot be launched at this time?

Hi there
I installed Adobe InDesign CS3 then CS4 today - when i open Adobe Acrobat Professional 8 - it says Adobe Epic_App cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Epic_App.
Even if i open an InDesign document - it still comes up with this message.
How do i fix this?
Thanks

Hi ,
I would like to inform you that this typically associated with a licensing error .You might want to refer the following document even though it is for Acrobat 9 .Please have a look and see if that helps.
https://helpx.adobe.com/acrobat/kb/error-epic-app-cannot-continue.html
Regards
Sukrit Dhingra

I just migrated everything from an old Mac to a new one, but now Acrobat Professional will not launch. I get an error message: "Adobe Acrobat 8 Professional cannot be launched at this time......"

I just migrated everything from an old Mac to a new one, but now Acrobat Professional will not launch. I get an error message: "Adobe Acrobat 8 Professional cannot be launched at this time......"

I used "Migration Assistant" to send everything from my old mac to my new which included my copy of Adobe Acrobat 8 Professional. I tried downloading an update but when it asked me to find the version of acrobat to replace it was grayed out and I was unable to select it. My OS is 10.9.4

Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional

Adobe Acrobat 8 Professional cannot be launched at this time. You must launch at least one other suite component (such as Adobe Photoshop) before launching Acrobat 8 Professional

Hey Sue,
Considering this error, I would suggest you to please refer the KB doc link given below:
Error "Acrobat 8 Professional cannot be launched" | CS3
Hope it helps.
Regards,
Anubha

Application putty cannot be launched on this device.

Similar Messages

Maybe you are looking for