Application Requirement Not Detecting Windows 8.1

Hi all - Wondering is anyone else is seeing this behavior. If I deploy an application that has no OS requirement set it will show up fine on a Windows 8.1 machine. If I add an OS requirement for all Windows 8 (All Windows RT, All Windows 8 (64-bit)
& All Windows 8 (32-bit))) the machine does not show the application as available. Below is an excerpt from the AppIntentEval.log before and after the Windows 8 OS requirement is selected. It appears that SCCM is not picking up the Windows
8 OS requirement properly. Am I missing something? Enviroment is ConfigMgr 2012 SP1, client version is 5.00.7804.1202.
With no OS requirement selected.
ScopeId_A0D7A85E-A3C2-486D-8931-493AB26E1100/Application_2d5ea2a6-9567-4deb-89c0-03420259ad2e/16 :- Current State = NotInstalled,
Applicability = Applicable, ResolvedState = Available, ConfigureState = NotNeeded, Title = App-V 5.0 SP1
With OS requirement Windows 8 selected.
ScopeId_A0D7A85E-A3C2-486D-8931-493AB26E1100/Application_2d5ea2a6-9567-4deb-89c0-03420259ad2e/17 :- Current State = NotInstalled,
Applicability = NotApplicable, ResolvedState = None, ConfigureState = NotNeeded, Title = App-V 5.0 SP1
Thanks,
Rick

I may have found my issue. Looking at
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigClientOS it looks like Windows 8.1 only shows supported under SCCM 2012 R2. This could explain my unexpected behavior under SCCM 2012 SP1.

Similar Messages

Jre6u27 win7 (64) applications can not detect

windows7 x64
I had jre7.x version installed. And it works fine.
Once I removed this version and installed jre6.27 (in fact, when install jdk6.27), applications can not find jre.
"JAVA_HOME" is set.
"Path" contains path to jre & jdk (i was try any varyations also with '\bin' subfolders).
javac run from any location.
The registry has all nessesary mentions jre & jdk.
But, nevertheless, applications does not detect jre.
Please help! Any suggestions are welcome.
fyi: javaFX 2.0.2 with sdk also installed in system.

I tried every thing
updated my bios
tried in device manager
tried in any mode you like
tried to install the latest drivers that support windows7

ERROR The Audio Device supported by this application is not detected. the application will ex

Sound is fine but I get error message every time I try to start any of the creative applications that come in mediasource like the graphic eq, speaker settings, surround mixer, EAX and THX consoles; the error: The Audio Device supported by this application is not detected. The application will exit.
I have read the forum notes on this error message and seems other have had this same issue, but I don't see any solutions...if anyone knows anything about solving this little mystery, please reply - need to get into that console to fully utilize this sound card.

AFTER AUTOUPDATE this problem began. I removed the audigy package and reinstalled everything from the factory CD and still get this message. This happens every time I update the audigy drivers and thx. I am tired of doing recoveries to get audigy to work. Too bad I keep forgetting that the updates cause this problem. Audigy Platinum 2 works fine wothout the update. I will never update again!
How can I resolve this problem short of a full recovery?

Purchased Photoshop Elements 13, downloaded, entered serial numbers, then got the error message: OS Requirement not met, Windows Vista not supported.

Purchased Photoshop Elements 13 (upgraded from Photoshop Elements 10), downloaded, entered serial numbers, then got the error message: "OS Requirement not met, Windows Vista not supported" now what?

Sweetie Bug wrote:
now what?
System requirements | Adobe Photoshop Elements
The last version of PSE which supported Vista was version 12.
You'll either have to upgrade your operating system to Windows 7 or Windows 8 or return PSE 13 for a refund.

Boot camp does not detect windows anymore

hello
i have an iMac, osx Lion, i was using boot camp for windows xp, the cmd button did not work for some time and since i had to access some info on osx and was fed up with pushing over and over again the cmd on start, i went to windows control panel and changed the default opt on startup on osx.
after that the only option remained was osx lion, nothing shows windows partition anymore except the space on disk that is used but cannot be accessed. I would really need to access that, i have lots of stuff there i also use windows on mac for playing a game which sadly does not work on osx (League of legends). I tried using cmd+r, nothing happened. I am very sad and dissapointed, please someone help me.
with best regards,
me

you still have not clarified if you used BCDedit or repair the MBR
Whether you used an NTFS driver - that may be all you need - try the full functional demo Paragon NTFS for OS X, it is great at mounting PC NTFS volumes and cases.
http://www.paragon-software.com/home/ntfs-mac/
There is no such thing as "boot camp" to detect Windows. Poor language. BCA partitions. Do you want to remove XP partition? that is the tool.
Boot Camp control panel in Windows that has a Startup Disk style feature.
But "boot camp" means zilch other than installing a set of drivers and the creatiion of a partition.
Of course Lion Recvovery only works with OS X, not XP. There is a hidden feature to show all partitions and their health but nothing more.
Backup everything and rebuild and restore.

Grub not detecting Windows on RAID 0 array.

I'm having some trouble with my RAID array. I have tried to research this, but all I can find is how to install Arch Linux ONTO an array, not how to detect Windows on one, and configure grub for it. I have two SSDs in a RAID 0 configuration, which holds my Windows 7 installation. I then have two HDDs in JBOD. One of those HDDs is my mass storage drive for Windows and Linux, the other is my Arch Linux install.
The problem is that--with os-prober installed--Grub isn't detecting my Windows install. I was trying Fedora when I converted my Windows install to RAID 0, and Fedora picked up on it when I ran grub-mkconfig with os-prober installed. Grub at that point was pointing at /dev/mapper/<some random-seeming string> for Windows, and it worked.
Now that I'm back "home" to Arch Linux, I am trying to get grub to see Windows, but it never detects it. /dev/mapper/ is empty except for 'control', and /dev contains sda and sdb, which are the drives that are supposed to be in the array. At this point, I'm completely lost. I'm not even sure if this is software or hardware raid. I thought it to be hardware, because my motherboard has a RAID option rom on it, which is what I used to build the array, but the /dev/mapper stuff makes me think it's software.
Can anyone at least get me pointed in the right direction?
Thank you,
KD0BPV
Last edited by kd0bpv (2012-12-08 10:25:12)

Well, I did add ntfs to my initramfs, but it still dropped into an emergency mode terminal. I checked to make sure that it was successful, and the ntfs kernel module was loaded. Any ideas?
# lsmod | grep ntfs run in emergency shell:
ntfs 191626 0
/etc/mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="ext4 ntfs"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect pata scsi sata dmraid filesystems usbinput fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
The systemd journal is still showing the same errors I posted earlier.

WARNING: OS requirements not met Windows 7 64-bit

I am running Windows 7 Enterprise Edition 64-bit and I have tried to download and install the Dreamweaver CS5 trial and i get this error, WARNING: OS requirements not met for {C79312BD-3E76-4474-A10C-1435D1856A4B}, as well as many of these WARNING: Payload cannot be installed due to dependent operation failure error messages. I have tried disabling my firewall and all of the other fixes I have found on the forum. I used to have Adobe Creative Suite CS3 but it kept crashing on my operating system and I had hoped that this new CS5 could work with Windows 7. Has anybody figured out how to fix this or any other issues? This is really frustrating because I manage a few web sites and I really need to be able to use Dreamweaver.

I would contact Adobe support. Enterprise is basically Ultimate with some features turned on/off by default a little differently and the licensing is really the only key difference between Enterprise has to be bought through MS Volume Licensing. It could just be an issue with the installer mis-reading your OS and a bug that they are not aware of.

"the audio device supported by this application is not detected&qu

OK so i have had a Audigy 2 ZS Platinum for like 2 years now. About 2 weeks ago the Mic stopped working so i tried updating the drivers to see if that would fix the problem it didn't. Then a couple of days ago i got a new case so while transferring all the hardware i decided to try putting the card in a different slot to see if that was the problem(i also deleted all the drivers and software before hand). So i did that started the comp up and installed the drivers and software using the original CD. Now that fixed my Mic it works fine now along with the sound, But if i try and use and of the creative software like the equalizer or EAX console i get the message. Now the sound and Mic work and if i goto my device manager the computer sees the card "Creative SB Audigy 2 ZS(WDM)", but i still get that error message. I also noticed that its a lot quieter now and i have to turn my speakers up a lot more to get the same noise level. Along with if i am playing a game (WoW specifically) and listening to music i get a crackling noise from my speakers. This doesn't happen if im just listening to music so i know its not the speakers.
OK thanks for reading my really long post any help would be greatly appreciated.

I have the Audigy 2ZS Platinum Pro version and I have the exact problem.
It started?with the missing microphone, I unistalled and reinstalled the drivers from original CD. During the installation, I got error message that?the?installation?file _iss.dll was not found. Repeated installation of drivers with the same result. After the end of the installation, I am?getting same error message about audio device not detected.
Any ideas someone??I spent a good amount of money when I bought this sound card, thinking that I was buying a proper sound card from a respected company, which would give me good support when I would need it. Please don't prove me wrong....

Error 2 and Apple Application Support Not Found - Windows 8.1 Pro

I was unable to update iTunes when the new update came out, so I uninstalled it and reinstalled it. When re-installing it I received the following error:
An error occurred during the installation of assembly ‘Microsoft.VC80.CRT,type=”win32”,version=”8.0.50727.6195”,publicKeyToken=” fc8b3b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070422.
I click OK and the process continues until I receive the following error:
Service ‘Apple Mobile Device Service’ (Apple Mobile Device Service) failed to start. Verify that you have sufficient privileges to start system services. “
I ran the program as an Administrator from the start, so I do have sufficient privileges. I am given three options: Abort, Retry, and Ignore. Retry doesn’t work, so I hit ignore. The process then completes and when I try and open the program I receive the following error:
Apple Application Support was not found. Apple Application Support is requires to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2
I have uninstalled and reinstalled numerous times and attempted Apple Application Support by itself by unzipping the setup. When I do that I receive the following error:
An error occurred during the installation of assembly ‘Microsoft.VC80.CRT,type=”win32”,version=”8.0.50727.6195”,publicKeyToken=” 1fc8b3b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070422.
I have no idea what else to try. Please help.
System Info:
Windows 8.1 Pro
Processor Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz
Ram 16 GB
64-Bit OS, x64-based processor

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Bootcamp does not detect windows 7

I am trying to create a partition for which I have inserted windows 7 original dvd and trying to go further. After waiting for some time I cicked next to go further bu drive ejects orginal program DVD and does not get detected. I tried other media that do also does not get detected. Give me solution if any one has encountered this situation

Could be your dvd drive is faulty. When you are in os x can you read the windows dvd.

AirPort - Not detecting Windows XP

I´m trying to acess my air port (using AirPort Utility) and Windows XP is not founding my airport ????
Im trying to rescan my airport !
Some point that I tried:
1.Acess my Air port using a cable;
2.My firewall is turned off;
3.I reistalled my Airport utility 3 times.
Somebody could help me ?
DELL Windows XP

I do not have a PC here running XP to test, but if I did I would do the following:
1) Turn off the Windows Firewall in the Control Panel
2) Temporarily disable the anti-virus software
3) Perform a Factory Default Reset on the AirPort Express
4) Connect the Express using Ethernet, open AirPort Utility to see if it will connect to the Express
5) If still no luck, in AirPort Utility, click on the File menu in the upper left corner of the screen and select Configure Other. Enter 10.0.1.1 for the IP address and "public" (without the quotes) as the password
If still no luck, the HP is likely running some other applications that may be interfering with the connection. I assume that the AirPort Express is not defective and the Ethernet port on the PC is operational.

Firefox 21 not detecting window unload nor window onbeforeunload events

Doing a website and want to change users online status when the browser is closed.
Only works when the tab is closed and not when the browser window is closed.

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

The audio device supported by this application is not detect

Here is the information on my system:
AMD Athlon 64 3700
2 GB RAM
MSI K8 Neo4 Platimum M/B
Nvidia 7800 GT Graphics card with 256 MB RAM
Audigy X-Fi Platinum
Windows XP home SP2
The card is functioning, however, none of the applications will function. The Audio console halts with a message ""
This card has worked fine for about four months or so and now this seems to be a problem all of the sudden. I have noticed others are having these issues. I hope that Creative has not become another ATI (poorly written apps and drivers). I would like to know a fix for the matter at hand. I invested too much in my computer not to be able to get full use of it.
Brion

I found a solution to the problem that will allow the apps to run and the drivers to function correctly. My computer showed as having SP2, however, I decided to download the IT Professional version of it and install it again. Problem has disappeared and everything is working once again. Seems this Creative software is HIGHLY dependant on SP2. Here is a link to what I used to solve my problem:
http://www.microsoft.com/downloads/details.aspx?FamilyId=049C9DBE-3B8E-4F30-8245-9E368D3CDB5A&displaylang=en

[SOLVED] Grub Not Detecting Windows

Hello,
So here's the scenario:
I initially had Ubuntu and Windows 8, but couldn't boot, so I used boot-repair (via live Ubuntu), and it got fixed; I could use Windows 8 again (Ubuntu didn't matter).
I then deleted Ubuntu, then installed Arch instead. Grub was successfully installed, Arch and Windows 8 are shown, except when I choose Windows 8, it goes to the Windows Boot Manager (which shows a single choice of Windows 8). When I choose it, it says that it failed to start.
File: \Windows\system32\config\system
Status: 0xc000025
Info: The operating system couldn't be loaded because the system registry file is missing or contains errors.
How can I get it to work as before?
I've tried using a custom.cfg as suggested in the manual
menuentry "Windows 8"{
set root="(hd0,1)"
chainloader +1
The entry showed up after running grub-mkconfig, except that it did the same thing as the original choice detected by os-prober (as in the one during the installation mentioned above).
By the way here's my partition layout:
/dev/sda1 Windows System Reserved
/dev/sda2 Windows
/dev/sda3 Arch
I also tried to set root to (hd0,2), but it gave a similar error:
File: \Boot\BCD
Status: 0xc000000f
Info: The Boot Configuration Data for your PC is missing or contains error.
I believe this is because I've tried to work with EasyBCD/BCDedit before.
Last edited by jddantes (2014-04-16 11:20:46)

Finally solved it!
It was more of a Windows problem than an Arch one. I used Live Ubuntu's GParted and noticed that my Windows partition (/dev/sda2) was marked by an exclamation point. I right-clicked to Information and this was the message:
ntfs_decompress_mapping_pairs: Input/output error NTFS is inconsistent. Please run chkdsk /f on Windows then reboot it TWICE!
I was starting to download a Windows 8 ISO, but thankfully I found out that you could create a recovery drive from an existing Windows 8 installation (I had another computer).
Failed attempts:
There was no reinstall option for me (looking back at it, that's a good thing), so I went for the Fix Startup Problems options. I ran it thrice and I stopped because it finally said that it couldn't fix it.
I had no System Restore Points either.
I wanted to see if the Continue to Windows 8 option would magically be able to boot it, but after the screen froze for 2-3 minutes, I rebooted and went for the Command Prompt.
More failed attempts with the Command Prompt:
I was able to find this http://social.technet.microsoft.com/For … proinstall
The instructions were:
Type Bootrec /RebuildBcd, and then press ENTER.
If the Bootrec.exe tool runs successfully, it presents you with an installation path of a Windows directory. To add the entry to the BCD store, type Yes. A confirmation message appears that indicates the entry was added successfully.
If the Bootrec.exe tool cannot locate any missing Windows installations, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order in which they are presented. Press ENTER after each command.
Bcdedit /export C:\BCD_Backup
ren c:\boot\bcd bcd.old
Bootrec /rebuildbcd
Restart the computer.
So I tried, but it failed anyway. Then I began to notice. The current directory was X: (I was booting from the USB), and by some chance I managed to figure out that there were also C an D.
I searched for the command to display the disks:
http://www.computerhope.com/issues/ch000854.htm
wmic logicaldisk get name
What I wanted was E. (This is what will be C normally, with the Program Files and all). I also had F, which I will guess will be the free space remaining which I put aside for swap (it couldn't be accessed in the Prompt with dir f:).
I tried the above solution with E instead of C, but it failed.
What finally worked:
chkdsk /f e:
And now it boots when I choose it in Grub. Sometimes the Windows Boot Manager pops up, but whether it does so or not, Windows 8 loads properly.

Audio is not detected / Windows 8

First I was having trouble to open the program.
It was happening the following error:
"Adobe Premiere Pro Startup Error
Adobe Premiere Pro could not find any capable video play modules.
Please update your video display drivers and start again."
I solved the issue changing the settings in the Switchable Graphics.
However, the program is not working properly. When I import a video, it doesn't come with audio.
I tested the same video in another laptop, in which the Windows is not the 8, and the audio worked well.
What should be the problem?! What can I do to solve it?!
Thank you very much,
Aline.

Two things...
1st, More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
2nd, what are you editing?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
And, a general comment on making sure your video is recognized
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

Application Requirement Not Detecting Windows 8.1

Similar Messages

Maybe you are looking for