Application server 8.2 configuration settings

I load some libs at classpath settings at JVM settings. It's working but i don't know the effects that this change makes. I read the Sun docs, but it says nothing about the effects... Somebody can help me on??
I want to know if the server will override their libs!!!!
thanks in advance

Hi
I have tried installing and running the Sun application server 8.2 on Red Hat Enterprise Linux 5, it works fine for me. But it gave issues on in the pre-prod environment.
We got the reply from the support as it is not supported with RHEL 5, they have asked us to run it on RHEL 4.
So the bottom line would be that you can try installing and run few test but for the prod or pre-prod environment it is not recommended.
-Vishal Iyer

Similar Messages

How do I remove All OS X Server data and configuration settings

My server app crashed and I deleted the app using app cleaner and removed the server file from the Library folder, owever when I try to reinstall the setup defults to the setting from the initial install. Is there a way to remove all the stored data, profiles and OD included) as well as any configuration settings, such as those for AEBS and host name and ip address. Essentially, I would like to perform an install that is the same as the initial, a truly cela install. I am using a Mac Mini 2013 model as the server and MBP 15" as the main client.

Completely clean install? Wipe and install OS X, and then reload Server.app and configure that.
Might want to report the error to the App Cleaner folks, too.

Oracle 10g application server installation and configuration

Dear All,
i am going to install oracle 10g application server including forms & report services.
what is the latest version for oracle 10g application server so that i download and install the correct one.
please put URL to download the software .
Thanks & regards,
Sher khan

hi,
for forms and reports purpose you can download standalone oracle forms and reports (version 10.1.2.0.2) component.
If you want to upgrade it you can upgrade it to 10.1.2.3.0.
find url for the same :
http://www.oracle.com/technetwork/middleware/ias/downloads/101202-095224.html
i'll recommend you to use oracle fusion middleware 11g forms, reports,portal and discoverer component.
regards,
Ajinkya

Update to 10.9.1 whips out Server and Apple Configurator Settings

I just updated my mac Mini Server that was already running Mavericks and Server App. When the reboot was done and I started the server is was like I had just installed the app. All the cache and settings were gone. Went to use Apple Configurator. Same thing. All profiles and managed devices and groups are gone. Is there anyway to get these configurations back?

Actually, this is an id10T mistake. I rebooted to the wrong hard drive. Please disregard this problem. It is solved.

File not getting Saved on Application Server

Hello All,
We created a file in "Automatic Payment Transactions (F110 Transaction)" and are able to save the text file on Local drive. But for our e-banking requirement we need to store this file on our application server. The configuration settings in OBPM4 are already done and now system is picking the default application server path while saving file in "Payment Medium - > DME Administration" transaction. The problem is - although the system is picking the required path of application server but file is not getting saved. The error coming is: File <path> could not be opened (Message Number: FZ231).
We have checked for 777 authorisations (OS authorisations) for the folder.
Please suggest that what can be done to resolve th issue.
Regards,

What exactly we need to check in Payment program? We are not able to save the file on application server. There is no problem while saving the same in local drive.
Regards,

SSO from non sap application server to SAP systems

Mysapsso2 cookie has been generated after we are login into the portal https://FQDN/irj/portal for all the backend systems in client browser. Since it is working fine. After login into the portal , while clicking the URL iview of external JBoss application sever in portal home page and it is shows the new windows pop up login page. After login into this external JBoss application server, we have configured work item for SAP ITS WEBGUI login page of the backend system inside this JBoss appliaction. Here we need to pass the mysapsso2 cookie information in SAP WEBGUI, so that login page is bypassed using SSO. Kindly do give some suggestion for fixing this issue. Kind Regards, R Rajavelu

Try to use it Appsintegrator to access the non sap application from SAP Application

How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete

Fail to search Oracle Application Server while installing EM Grid Control

Fail to search Oracle Application Server while installing EM Grid Control 10.2.0.2 on Windows XP. All the steps are successful except the last step failed.
I uninstalled the previous Oracle 10g database using the stops of the following link:
http://krsethur.wordpress.com/2006/06/13/uninstalling-oracle-10g-manually-from-windows-xp/
Now I install EM Grid Control with a new database.
I don't have any MetaLink account now.
The log massage from G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
Command: oracle.sysman.emcp.agent.AgentPlugInThe log messages from C:\Program Files\Oracle\Inventory\logs\installActions2009-12-27_12-12-43...
Starting Agent
Command = oracle.sysman.emcp.agent.AgentPlugIn has failed
Exception : java.lang.Exception:
Management Agent Configuration Assistant is failed.
The following failed messages are recorded:
configureAgent: Search on a non-RAC system: Fail to search Oracle Application Server.
Info: Configuration Assistant "Agent Configuration Assistant" is fail.
*** Starting OUICA ***
Info: Created a new file G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
Info: Since the option is to overwrite the existing G:\OracleHomes\agent10g\cfgtoollogs\
        configToolFailedCommands file, backing it up
Info: The backed up file name is G:\OracleHomes\agent10g\cfgtoollogs\configToolFailed
        Commands.bak
Warning: OUI-25031: Some Configuration Assistant is failed. We recommend you to retry
        Configuration Assistant.
...I check all the related service and I can see all the related service are up except that the status of Application server is not running and the OracleCSService is in the starting status all the time.
G:\OracleHomes\oms10g>cd G:\OracleHomes\agent10g\BIN
G:\OracleHomes\agent10g\BIN>emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent Version     : 10.2.0.2.0
OMS Version       : 10.2.0.2.0
Protocol Version : 10.2.0.2.0
Agent Home        : G:\OracleHomes\agent10g
Agent binaries    : G:\OracleHomes\agent10g
Agent Process ID : 5812
Agent URL         : https://host1.localdomain:3872/emd/main/
Repository URL    : https://HOST1:1159/em/upload
Started at        : 2009-12-27 19:02:04
Started by user   : SYSTEM
Last Reload       : 2009-12-27 19:02:04
Last successful upload                       : (none)
Last attempted upload                        : (none)
Total Megabytes of XML files uploaded so far :     0.00
Number of XML files pending upload           :        4
Size of XML files pending upload(MB)         :     0.04
Available disk space on upload filesystem    :    41.63%
Last successful heartbeat to OMS             : 2009-12-27 19:02:25
Agent is Running and Ready
G:\OracleHomes\oms10g\BIN>emctl status oms
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Management Server is Up.
G:\OracleHomes\oms10g\BIN>emctl status iasconsole
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle 10g Application Server Control is not running.

Sorry, it's my mistake. what I am installing is Grid Control 10.2.0.2.
G:\OracleHomes\oms10g>cd G:\OracleHomes\agent10g\BIN
G:\OracleHomes\agent10g\BIN>emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent Version     : 10.2.0.2.0
OMS Version       : 10.2.0.2.0
Protocol Version : 10.2.0.2.0
Agent Home        : G:\OracleHomes\agent10g
Agent binaries    : G:\OracleHomes\agent10g
Agent Process ID : 5812
Agent URL         : https://host1.localdomain:3872/emd/main/
Repository URL    : https://HOST1:1159/em/upload
Started at        : 2009-12-27 19:02:04
Started by user   : SYSTEM
Last Reload       : 2009-12-27 19:02:04
Last successful upload                       : (none)
Last attempted upload                        : (none)
Total Megabytes of XML files uploaded so far :     0.00
Number of XML files pending upload           :        4
Size of XML files pending upload(MB)         :     0.04
Available disk space on upload filesystem    :    41.63%
Last successful heartbeat to OMS             : 2009-12-27 19:02:25
Agent is Running and Ready
G:\OracleHomes\oms10g\BIN>emctl status oms
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Management Server is Up.
G:\OracleHomes\oms10g\BIN>emctl status iasconsole
Oracle Enterprise Manager 10g Release 10.2.0.2.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle 10g Application Server Control is not running.Edited by: junez on Dec 27, 2009 4:18 PM

Oracle Application Server 10.1.3.1 installation issue

Hi,
I am trying to install Oracle Applicaiton server on linux and i have installed it on similar boxes before without any issues, however this time around after i am done with the installation, it is not showing me the enterprise console. It gives a successful installation message but with the following message.
Application Server Control Console is not running in this instance of Oracle Application Server. You can manage this instance remotely through another instance of Oracle Application Server that is configured to run Application Server Control Console.
What should I do to get the admin console. I also looking around and saw but emctl utitlity is not there in ORACLE_HOME/bin
Edited by: user9938780 on Dec 11, 2008 11:34 AM

the 10.1.3.1 version does not use emctl
if you do a opmnctl status -app you can see your applications, one of them is ascontrol
you can reach the emconsole through http://hostname:7777/em
to start you can issue opmnctl startproc application=ascontrol
reg
Michel
Edited by: MichelS on Dec 11, 2008 11:53 AM
Edited by: MichelS on Dec 11, 2008 11:54 AM

Deploy third party JAVA class at application server

we have created a form to enter the name in regional language (Hindi),
In the form we have implemented the java following javaclass in the implementation class under functional section
oracle.forms.pjc.TextField.HindiPJC2k
we are using the application server 9i v-1 to deploy the forms. the forms are called through applet using jinitiator at client end
at application server level following configuration have been done.
in the directory e:\oracle\806\Forms60\server\pjc\TextField
the class file has been copied
and also defined the font.properties file (which include the hindi fonts)
and copied this file in the following directory
e:\oracle\806\forms60\server
It is not working kindly help

Did you append the your jar file name in formsweb.cfg ?
you must add it , for example; archive_jini=f90all_jinit.jar,yourfilename.jar
Mücahid Uslu

Error installing Oracle Application Server OCA on SuSE 11.1

Hi,
I am installing OCA on a Linux SuSE 11.1.
The Configuration assisent::
Oracle Application Certificate Authority configuration assistant Failed.
I Get following information from Oracle installer:
Output generated from configuration assistant "Oracle Application Server Certificate Authority Configuration Assistant":
/home/oracle/OraHome/oca/perl/bin/perl: error while loading shared libraries: libnsl.so.1: cannot open shared object file: No such file or directory
Configuration assistant "Oracle Application Server Certificate Authority Configuration Assistant" failed
Is there anyone who has a solution for this Error?
Best Regards
Tommy

Try to comment out the LD_ASSUME_KERNEL entry in file $ORACLE_HOME/oca/bin/cminst.
The entry was put there for bug 4527581 - OCA fails on RH4.0, but will generate error on some more recent Linux distributions.

JCO - Application Server

Hi
I am trying to make a JCO connection through an application server (single server) instead of message server (load balanced).
I included the application Server in SLD administration.
When I reference this application Server in Webdynpro configuration manager, in JCO connection, all parameters seem to be ok, but I got the error message:
CIM_ERR_FAILED MAXLEN(2) violeted for property AppServNumber.
I filled application server number in the field labeled "number"....should I put this information in some another place too??
Any ideas?
Regards.

Hi Ronaldo,
I don´t know the solution of your problem but the easiest way to get your R/3 system data into SLD is by using SLD supplier bridge and (I think) transaction RZ70 in your R/3 system. When configured correctly the R/3 system sends its data automatically to the SLD server which registers the R/3 system then.
Have a look at Post-Installation Guide of SLD which is available at service marketplace.
Additionally you should know that you need a message server if your are working with Adaptive RFC for retrieving the meta data of your function modules.
In Web Dynpro Administrator you have to define to JCO destionations. One for meta data (message server) and another for model data (message or application server).
Does this help?
Helmut

Exchange 2010 Application server email source finding

Hi Team,
From Exchange server I want to find out all email traffic generated from Application server where SMTP configured as HUB transport server.
Problem is that i want to remove anonymous permissions set on receive connect so prior i want to find out all application server IPs, add them into receive connector permissions.

Hi,
If you want to find all application server IPs, you can follow the steps below.
1. Locate the receive connector which you configure for relay.
2. Right-click and choose Properties.
3. Click Network tab, under "Receive mail from remote servers that have these IP addresses", they are application server IPs.
If they are IP range, you can find application server IP address via Internet headers.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Configuration settings for applications ... best practices?

Hi!
We're currently developing applications for WebLogic (ADF Faces RC, EAR deployment).
Now we arrived at a point where we need some simple configuration settings/properties on the server or the domain. The applications should be able to read these settings, the mechanism should be as simple as possible.
An administrator at the server should be able to update the settings and the applications should pick up the changed values the next time the settings are accessed, without server or application restart.
I wonder what the best way would be to handle this?
- put them into the database, but then all apps would need DB access to those settings?
- System env. variable on the server, but how to pick up changes without restart?
- Property file? Where do I put that so that an admin can easily find and edit it?
What are you guys using? I was kind of hoping that WebLogic would provide some UI in the console app, that enables an admin to set some properties, but I couldn't find one. Is there one?
Any advice?
Thanks.
Sascha

Hi Sascha,
If you place the properties files in %WEBLOGIC_HOME%/user_projects/domains/[your_domain] then the properties file should be picked up, without having to be placed in a jar file, and in a location that will be easy to find for the WebLogic administrator.
Hope it helps.
Regards,
Cris

How to configure sun application server 8.2 for Oracle RAC 10g

Hello,
We have numerous boxes running the sun platform application server 8.2 and 2 boxes running enterprise version 8.2 all connecting to a 4 node Oracle RAC 10 G release 2 database. We have the system up and working. The application servers are connecting just fine to the database and the apps don't have any problems querying, inserting, etc. However, when we try to do failover testing of situations when a node or nodes of the Oracle RAC database goes down the application server does not gain new valid connections. Our configuration is this, OracleDataSource for the data source, table validation turned on with a valid table, ONS configuration set in properties, connectionCache enabled, and fastconnectionfailover enabled as well in the properties. We have that long oracle rac url with load balancing turned on set fot the database URL. We have the checkbox checked to fail all connections on any failure. ONS is configured properly within the database because we have a java application that runs outside of the application server that uses all the same settings described above (only set manually in our code for the OracleDataSource). This application works seemlessly when DB nodes are shutdown. We can shutdown all but one node and it's still humming along without skipping a beat. Start up one of the others, kill the last node, it still hums along nicely without skipping a beat. We'd really like to get the applications running in the application server to work the same way. Any help would be greatly appreciated. We've tried all the combinations that we can think of with configuration settings in the application server and it never works. Am tempted to rip out the database connection pool from inside the application server and configure it manually in the code but we are using entity beans and this is the much easier approach, if it will work. It's down to the point of does sun application server actually work with oracle RAC for connection failovers.

Hi,
We are also facing similar execption. Here is the error, we are getting, when a node is failed on RAC.
[#|2007-11-11T12:43:53.685+0000|WARNING|sun-appserver-ee8.1_02|javax.enterprise.system.core.transaction|_ThreadID=38;|JTS5041: The resource manager is doing work outside a global transaction
oracle.jdbc.xa.OracleXAException
at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1270)
at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:318)
at com.sun.gjc.spi.XAResourceImpl.start(XAResourceImpl.java:184)
at com.sun.jts.jta.TransactionState.startAssociation(TransactionState.java:258)
at com.sun.jts.jta.TransactionImpl.enlistResource(TransactionImpl.java:181)
at com.sun.enterprise.distributedtx.J2EETransaction.enlistResource(J2EETransaction.java:397)
at com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.enlistResource(J2EETransactionManagerImpl.java:312)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.enlistResource(J2EETransactionManagerOpt.java:114)
at com.sun.enterprise.resource.ResourceManagerImpl.registerResource(ResourceManagerImpl.java:113)
at com.sun.enterprise.resource.ResourceManagerImpl.enlistResource(ResourceManagerImpl.java:71)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:176)
at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:268)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:193)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
at com.sun.gjc.spi.DataSource.getConnection(DataSource.java:70)
at com.syntegra.nasp.etp.dax.DBManager.getConnection(DBManager.java:192)
at com.syntegra.nasp.etp.dax.DBManager.createDBCommand(DBManager.java:241)
at com.syntegra.nasp.etp.dax.DBManager.createDBCommand(DBManager.java:251)
at com.syntegra.nasp.etp.dax.sp.SPS_PRESCRIPTION_GUID_PROC.getCommand(SPS_PRESCRIPTION_GUID_PROC.java:31)
at com.syntegra.nasp.etp.dax.sp.SPS_PRESCRIPTION_GUID_PROC.execute(SPS_PRESCRIPTION_GUID_PROC.java:23)
at com.syntegra.nasp.etp.dax.PrescriptionBaseDataMapper.loadPresciptionByGUID(PrescriptionBaseDataMapper.java:203)
at com.syntegra.nasp.etp.model.PrescriptionBase.findByPrescriptionGUID(PrescriptionBase.java:176)
at com.syntegra.nasp.etp.messages.PatientPrescriptionReleaseRequest.execute(PatientPrescriptionReleaseRequest.java:120)
at com.syntegra.nasp.etp.service.ETPSLBean.processMessage(ETPSLBean.java:159)
at sun.reflect.GeneratedMethodAccessor97.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:147)
at com.sun.ejb.containers.EJBLocalObjectInvocationHandler.invoke(EJBLocalObjectInvocationHandler.java:128)
at $Proxy6.processMessage(Unknown Source)
at com.syntegra.nasp.etp.listener.RequestListener.onRequest(RequestListener.java:204)
at com.syntegra.spine.csf.consumer.mdb.CSFListenerRegisteringConsumer.onRequest(CSFListenerRegisteringConsumer.java:54)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.invokeListener(CSFConsumerBase.java:267)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.processMessage(CSFConsumerBase.java:180)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.onMessage(CSFConsumerBase.java:102)
at sun.reflect.GeneratedMethodAccessor96.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.enterprise.security.SecurityUtil$2.run(SecurityUtil.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.application.EJBSecurityManager.doAsPrivileged(EJBSecurityManager.java:955)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:158)
at com.sun.ejb.containers.MessageBeanContainer.deliverMessage(MessageBeanContainer.java:956)
at com.sun.ejb.containers.MessageBeanListenerImpl.deliverMessage(MessageBeanListenerImpl.java:42)
at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:130)
at $Proxy9.onMessage(Unknown Source)
at com.sun.genericra.inbound.DeliveryHelper.deliverMessage(DeliveryHelper.java:183)
at com.sun.genericra.inbound.DeliveryHelper.deliver(DeliveryHelper.
Regards
Selvan.

Application server 8.2 configuration settings

Similar Messages

Maybe you are looking for