Application server queue overflow,application server overloaded currently

dear Experts,
please check my problem and give me one solution
here iam trying to solve this problem but not getting result i,e
today i installed one system (nw2005sr3) and after that
i created one client for log in to this client i created parameter and save it
then i stoped my application server and started after
when i double clicked my gui application server is shown an error that error is
Error:
application server queue over flow
application server is overloaded currently,try another application server do you want to see error log
what happened for my server please give me some guidence for solution
Regards
Edited by: swathimatta on Sep 21, 2010 5:27 PM

hi Experts,
its my mistaq my version is wrongly typed nw2004s
i tried for to check from os level
but dpmon also not found
i did not get what is an error
why is shows this error and what is this means (application server overflow)
Regards

Similar Messages

I am getting error Error in calling up function 'BAPI_APOATP_CHECK' in APO server The current application triggered a termination

I am getting error Error in calling up function 'BAPI_APOATP_CHECK' in APO server The current application triggered a termination
when triggering for gatp.

Hi Virender,
This error can be experienced due to many reasons. based on my experience below reasons can cause this issue.
1) If you are using allocation check if allocation is correctly set.
2) In case you are using custom enhancements / user exits (in SD / GATP / CIF) check if any of them, causing this issue.
In my case correction of allocation setup could resolve this issue, so check what is the reason in your case.
Rgds
Sourabh

I have just switched over to iCloud and I am now getting an error message in iCal which is the following: The server is currently unable to handle the connection due to a temporary overloading or maintenance of the server. If this continues you should con

I have recently switched from MobileMe to iCloud and I now getting an error message in iCal :
"The server is currently unable to handle the connection due to a temporary overloading or maintenance of the server. If this continues you should contact the server administrator.
You may try to connect to the server again or take the account offline."
Since I am working from home and I am not on a server other than iCloud I don't understand why I am getting this message. (for 3 days). How do I fix it?

TomCT60,
Is your MacBook using Mac OS X 10.6.8 as indicated in your post? If so you will not be able to fully integrate with iCloud.
iCloud and Snow Leopard, by Roger Wilmut describes what iCloud options are available for Snow Leopard.
If you are using Lion, go to iCal>Preferences...>Accounts, and delete/re-add your iCloud CalDAV server.

Error "Event Queue Overflowed" with the "Write file to Citadel Server"

Hello,
I can import data from a file and I can see the data
in the historical database without troubling.
But I always have this error "Event Queue Overflowed", that don't perturb my data and my application (I have just this boring message).
I have tried many things :
- increasing the size of my input buffer (-> 1.000.000, no change) : I don't think so that it's important because I've tried with a value of 100 and anyway sometimes my application works with this small value of 100.
- increasing the File_location tag size (-> 260). No change.
- My write to Citadel.cfg is in the LabVIEW folder.
Can you help me ?
Thank you.

Hi,
What version of LabVIEW DSC are you using? if it is 6.1, have you applied fixes linked below.
http://digital.ni.com/softlib.nsf/websearch/513AA4A0BB60D10086256B48006D44B5?opendocument
I have seen a similar issue at the link below.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000000080000008C640000&ECategory=LabVIEW.Datalogging+and+Supervisory+Control
Please let me know if you have read it through?
Best Regards,
Remzi A.

Error in XI senario: The requested application,AFW,is currently unavailable

Hi Forum,
In a scenario, I have a BPM, which makes a synchronous call to R/3 for execution of a rfc enabled Function module, while doing so, it gives an error as a response, which i can see in the MONI:
503 Service Unavailable
The requested application, AFW, is currently unavailable.
The same error is also thrown when the BPM makes a asynchronous connection to a database,
can u help in diagnosing the problem, and help in rectifying it,
thanks

Hi
Just a check with this error
8) Error: The error message 503 Service unavailable Application stopped! is displayed.
Description:The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655

JAVA page error--You have requested an application that is currently stoppe

Hi,
After i installed the Java Support packages, and when i try to loging to http://<server name>:<port no> i see the following message "You have requested an application that is currently stopped"
But in the SAP MMC i see the server0, sdm, and dispatcher in green colour.
Pls let me know what can be the reason for the same

std_server0.out
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 109886.44 is starting...
Loading: LogManager ... 1094 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 63 ms.
Loading: ThreadManager ... 15 ms.
Loading: IpVerificationManager ... 16 ms.
Loading: ClassLoaderManager ... 0 ms.
Loading: ClusterManager ... 188 ms.
Loading: LockingManager ... 93 ms.
Loading: ConfigurationManager ... 1985 ms.
Loading: LicensingManager ... 15 ms.
Loading: CacheManager ... 110 ms.
Loading: ServiceManager ...
Loading services.:
Service memory started. (15 ms).
Service DQE started. (0 ms).
Service timeout started. (16 ms).
Service runtimeinfo started. (16 ms).
Service cross started. (282 ms).
Service file started. (375 ms).
Service cafeuodi~mnuacc started. (0 ms).
Service trex.service started. (31 ms).
Service p4 started. (1313 ms).
Service classpath_resolver started. (31 ms).
Service cafeucc~api started. (3797 ms).
Service userstore started. (31 ms).
Service jmx_notification started. (31 ms).
Service log_configurator started. (8094 ms).
Service locking started. (0 ms).
Service naming started. (329 ms).
Service ts started. (31 ms).
Service http started. (438 ms).
Service licensing started. (15 ms).
Service failover started. (78 ms).
Service appclient started. (93 ms).
Service javamail started. (750 ms).
Service jmsconnector started. (109 ms).
Service iiop started. (781 ms).
Service connector started. (94 ms).
Service webservices started. (2032 ms).
Service deploy started. (16562 ms).
Service com.sap.portal.runtime.config.kmreadonly started. (0 ms).
Service configuration started. (15 ms).
Service MigrationService started. (16 ms).
Service MobileSetupGeneration started. (78 ms).
Service MobileArchiveContainer started. (47 ms).
Service bimmrdeployer started. (16 ms).
Service dbpool started. (1359 ms).
Service UT started. (0 ms).
Service cafeugpmailcf started. (31 ms).
Service com.sap.security.core.ume.service started. (3906 ms).
Service security started. (1016 ms).
Service applocking started. (16 ms).
Service classload started. (0 ms).
Service servlet_jsp started. (203 ms).
Service shell started. (157 ms).
Service tceCATTPingservice started. (0 ms).
Service telnet started. (16 ms).
Service keystore started. (438 ms).
Service tcsecsecurestorage~service started. (31 ms).
Service ssl started. (0 ms).
Service cafummetadata~imp started. (297 ms).
Service dsr started. (515 ms).
Service tc.CBS.Service started. (16 ms).
Service ejb started. (1110 ms).
Service jmx started. (1860 ms).
Service webdynpro started. (1578 ms).
Service cafruntimeconnectivity~impl started. (21375 ms).
Service developmentserver started. (1078 ms).
Service cafumrelgroups~imp started. (1016 ms).
Service tcseccertrevoc~service started. (1625 ms).
Service tclmctcconfsservice_sda started. (31 ms).
Service CUL started. (187 ms).
Service sld started. (1578 ms).
Service basicadmin started. (609 ms).
Service tcsecwssec~service started. (1719 ms).
Service tcsecdestinations~service started. (2140 ms).
Service tcdisdic~srv started. (3984 ms).
Service prtbridge started. (984 ms).
Service adminadapter started. (422 ms).
Service cafeugp~model started. (15 ms).
Service tcsecvsi~service started. (172 ms).
Service com.adobe~LicenseService started. (656 ms).
Service com.sap.nw.kmc.readonly started. (15 ms).
Service cafeuer~service started. (0 ms).
Service apptracing started. (750 ms).
Service pmi started. (15 ms).
Service monitor started. (500 ms).
Service tceujwfuiwizsvc started. (2000 ms).
Service com.sap.portal.pcd.gl started. (2062 ms).
Service com.sap.nw.kmc.readonlymbean started. (1984 ms).
Service rfcengine started. (2359 ms).
Service com.adobe~DocumentServicesDestProtoService started. (1844 ms).
Service com.adobe~DocumentServicesBinaries2 started. (2766 ms).
Service com.adobe~DataManagerService started. (2719 ms).
Service com.adobe~DocumentServicesLicenseSupportService started. (2672 ms).
Service com.adobe~PDFManipulation started. (2688 ms).
Service com.adobe~XMLFormService started. (2641 ms).
Service com.adobe~DocumentServicesConfiguration started. (2781 ms).
Service com.adobe~TrustManagerService started. (204 ms).
Service jms_provider started. (3047 ms).
Service com.sap.portal.prt.sapj2ee started. (3125 ms).
Service tc.monitoring.logviewer started. (5953 ms).
Service com.adobe~FontManagerService started. (8594 ms).
ServiceManager started for 44672 ms.
Framework started for 48438 ms.
SAP J2EE Engine Version 7.00 PatchLevel 109886.44 is running!
PatchLevel 109886.44 November 17, 2007 10:27 GMT
>
Login :
std_dispatcher.out
[Thr 5540] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 109886.44 is starting...
Loading: LogManager ... 1250 ms.
Loading: PoolManager ... 0 ms.
Loading: ThreadManager ... 63 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ConnectionsManipulator ... 16 ms.
Loading: ClassLoaderManager ... 0 ms.
Loading: ClusterManager ... 156 ms.
Loading: PortsManager ... 16 ms.
Loading: LockingManager ... 125 ms.
Loading: ConfigurationManager ... 2594 ms.
Loading: LicensingManager ... 31 ms.
Loading: CacheManager ... 94 ms.
Loading: ServiceManager ...
Loading services.:
Service timeout started. (78 ms).
Service memory started. (15 ms).
Service r3startup started. (16 ms).
Service licensing started. (0 ms).
Service security started. (0 ms).
Service httptunneling started. (344 ms).
Service sld started. (15 ms).
Service jmx_notification started. (31 ms).
Service keystore started. (15 ms).
Service shell started. (422 ms).
Service iiop started. (312 ms).
Service jmx started. (203 ms).
Service telnet started. (78 ms).
Service p4 started. (859 ms).
Service ssl started. (31 ms).
Service classload started. (0 ms).
Service webservices started. (0 ms).
Service log_configurator started. (3266 ms).
Service configuration started. (0 ms).
Service basicadmin started. (141 ms).
Service http started. (468 ms).
Service adminadapter started. (0 ms).
Service jms_provider started. (266 ms).
Service tc.monitoring.logviewer started. (812 ms).
Service monitor started. (1422 ms).
ServiceManager started for 7000 ms.
Framework started for 11656 ms.
SAP J2EE Engine Version 7.00 PatchLevel 109886.44 is running!
PatchLevel 109886.44 November 17, 2007 10:27 GMT
>
Login :

Jdeveloper / OC4J - Server is currently shutting down

Hello,
Sometimes when running our application through JDeveloper we get a 500 Error in which it states TOPLINK exception and that the "server is currently shutting down". If we re-start and try again there is no problem.
Any idea what causes this?
Thanks!
Phil
Here are the 500 Errror details:
500 Internal Server Error
javax.faces.FacesException: #{MaintainContactPage.saveBtnAction}: javax.faces.el.EvaluationException: Exception [TOPLINK-4014] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseExceptionException Description: Cannot register SynchronizationListener.Internal Exception: Exception [TOPLINK-7061] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.ValidationExceptionException Description: Exception occurred within JTS.Internal Exception: javax.transaction.SystemException: Server is currently shutting down, no further transactions may be startedError Code: 000 at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:78) at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381) at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75) at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200) at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196) at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:629) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:119) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230) at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)Caused by: javax.faces.el.EvaluationException: Exception [TOPLINK-4014] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseExceptionException Description: Cannot register SynchronizationListener.Internal Exception: Exception [TOPLINK-7061] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.ValidationExceptionException Description: Exception occurred within JTS.Internal Exception: javax.transaction.SystemException: Server is currently shutting down, no further transactions may be startedError Code: 000 at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130) at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:72) ... 25 moreCaused by: Exception [TOPLINK-4014] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseExceptionException Description: Cannot register SynchronizationListener.Internal Exception: Exception [TOPLINK-7061] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.ValidationExceptionException Description: Exception occurred within JTS.Internal Exception: javax.transaction.SystemException: Server is currently shutting down, no further transactions may be startedError Code: 000 at oracle.toplink.exceptions.DatabaseException.cannotRegisterSynchronizatonListenerForUnitOfWork(DatabaseException.java:56) at oracle.toplink.jts.AbstractExternalTransactionController.registerSynchronizationListener(AbstractExternalTransactionController.java:127) at oracle.toplink.publicinterface.UnitOfWork.registerWithTransactionIfRequired(UnitOfWork.java:3841) at oracle.toplink.publicinterface.Session.acquireUnitOfWork(Session.java:253) at org.ic.sms.apps.das.DasClientManager.createClientUnit(DasClientManager.java:469) at org.ic.sms.apps.bus_logic.core.client.ClientManagerImpl.save(ClientManagerImpl.java:263) at org.ic.sms.apps.bus_logic.publicapi.managers.ClientManager.save(ClientManager.java:102) at org.ic.sms.apps.s02_client.MaintainContactPage.saveBtnAction(MaintainContactPage.java:854) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126) ... 26 moreCaused by: Exception [TOPLINK-7061] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.ValidationExceptionException Description: Exception occurred within JTS.Internal Exception: javax.transaction.SystemException: Server is currently shutting down, no further transactions may be started at oracle.toplink.exceptions.TopLinkException.<init>(TopLinkException.java:46) at oracle.toplink.exceptions.ValidationException.<init>(ValidationException.java:254) at oracle.toplink.exceptions.ValidationException.jtsExceptionRaised(ValidationException.java:784) at oracle.toplink.jts.JTSExternalTransactionController.beginTransaction(JTSExternalTransactionController.java:56) at oracle.toplink.publicinterface.Session.beginExternalTransaction(Session.java:354) at oracle.toplink.publicinterface.Session.beginTransaction(Session.java:385) at oracle.toplink.publicinterface.UnitOfWork.beginTransaction(UnitOfWork.java:412) at oracle.toplink.jts.oracle9i.Oracle9iJTSSynchronizationListener.register(Oracle9iJTSSynchronizationListener.java:92) at oracle.toplink.jts.oracle9i.Oracle9iJTSExternalTransactionController.register(Oracle9iJTSExternalTransactionController.java:50) at oracle.toplink.jts.AbstractExternalTransactionController.registerSynchronizationListener(AbstractExternalTransactionController.java:122) ... 37 moreCaused by: javax.transaction.SystemException: Server is currently shutting down, no further transactions may be started at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.ApplicationServerTransactionManager.createTransactionWithMaxConcurrentTxCheck(ApplicationServerTransactionManager.java:146) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.ApplicationServerTransactionManager.createTransaction(ApplicationServerTransactionManager.java:104) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.ApplicationServerTransactionManager.begin(ApplicationServerTransactionManager.java:89) at oracle.toplink.jts.JTSExternalTransactionController.beginTransaction(JTSExternalTransactionController.java:52) ... 43 more

Phil,
I have not seen this before. Are you referring to the embedded server?
Is there any chance that an exception was thrown before this which could have caused the active JTA transaction to be marked for rollback or something more critical in the container. I believe you are looking at a follow on symptom caused by the application continuing after some failure.
I would recommend posting this to the OC4J to see if any of the experts there could shed some light on this.
Doug

How to detect which applications that are currently running

Hi there. Is there a way to detect which applications that are currently running on my machine? Is there a class that can get all of the running applications, you know, like the taskmanager.
//peter

What you are asking for is indeed not possible through "100% Pure Java," because each operating system that runs Java Virtual Machines can handle the running processes differently (think about the differences between a process scheduler for, say, Windows NT and your Palm Pilot, both of which could have a JVM running).
That means there are essentially 2 avenues to persue for this:
1. Use an external "user-level" command (like ps on a UNIX-like OS) and parse the results (this is what people are referring to when they say "Runtime.exec()". There have been some nice exec() frameworks posted around here before, so I'd recommend searching around a bit for more info.
I also found this link (from Google) which apparently shows the javadocs where someone has attempted something similarly on the Linux platform before...that's all I know about it:
http://www.cougaar.org/software/9.2/javadoc/api/org/cougaar/tools/server/system/linux/LinuxProcessStatusReader.html
2. Use a JNI (Java Native Interface) call to an externally provided C function to get the info you need. Here's a link to the Java 1.4 JNI information:
http://java.sun.com/j2se/1.4/docs/guide/jni/
Hope this helps! (But it's not going to be a quick and easy problem to work with)...
-J

Out of Office error: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.'

Hi,
This is my first post in the forums. Please forgive me if it's in the wrong category or if it's not posted correctly in any way.
I'll try and give you below as much information about the problem we have here as I can.
What we have:
- an on-premises Windows 2012 Standard server that is the PDC, DNS and DHCP server;
- a second Windows 2012 Standard server with the sole purpose of hosting our Exchange 2013 CU7 server;
- Windows 7 PCs with Office Home and Business 2010 v.14.0.7143.5000 (32-bit);
- Outlook 2010 connects through Outlook Anywhere (mail.ourdomain.com).
The problem:
If trying to set up Out of Office through Outlook on the client PCs, we'd get an error message: 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.' Interestingly, it does work normally for some users.
It works fine for all users if done through OWA.
Tests performed:
User 1 on PC1 has the problem. User 2 on PC2 doesn't have the problem. Both users are members of the same security groups.
- setting up User 2 on PC 1: the problem exists;
- setting up User 1 on PC 2: the problem exists;
- setting up a second Outlook profile on PC2 within User 2's domain account (the one that works), for the same User 2: the problem still exists!
I haven't been able to set up an Outlook account that works since this issue was discovered, although there are existing Outlook accounts that do not have the issue.
Let me also point out we have another issue we are working on and which may or may not be related: the Autodiscover function in Outlook doesn't work. Test E-mail AutoConfiguration results in 'Autoconfiguration was unable to determine your settings!'.
I can see postings in the Internet of other people having the same problem with OoO, but couldn't see a solution that fits my case: some existing accounts in Outlook are fine, other are not and newly created profiles of aforementioned working accounts do not
work. The majority of the articles/threads I read suggest recreating the Virtual Directories in Exchange, but we did that just a month ago (when troubleshooting the Autodiscover problem) and besides if the problem is in the Virtual Directories, I would expect
it to affect all accounts.
Any help in resolving this problem would be greatly appreciated. Please let me know if you need other details.
Apologies if the posting is not in the right place or not done properly - I'm still learning.

The IIS log files on the CAS might tell you something. Depending on how your proxy server handles NAT the IP address of your connection might be from the proxy server instead of your client.
In any case, a tool like Fiddler (http://www.telerik.com/fiddler) can be extremely helpful in working on problems like this because it can decode the SSL traffic on the client and you can see what's being sent
and what's being received.
Another thing to check (although it's unlikely to be your case) is whether or not your browser (when you try connecting to the autodiscover URL) thinks it's in the "Internet" zone. the "Local intranet", or at a "Trusted" site.
The domain names you use on machines on your LAN should be excluded from being proxyed. Anything with "." in the name will be set, unless excluded, to the proxy server.
Is the time correct on the client machine? Is it more than 5 minutes different to the Exchange machines and domain controllers? That'd be something that would cause Kerberos to fail.
A certificate can be a problem if its expired or if it doesn't have the correct names. But I wouldn't worry about the uglog.com domain just yet. Until you get the Autodiscover working with the SCP you have bigger problems.
If you've never used a WPAD file then don't worry about it. It's very useful if you have a complex network and you want to manage how browsers connect to servers. For example, if you have multiple proxy servers the each manage a different set of names, an/or
if some names should bypass proxy servers entirely and just connect directly. If run a strictly Microsoft network with only Microsoft product that you can manage with GPOs (and you can enforce those GPOs on every machine -- even the BYOD ones) you probably
don't need a WPAD.
--- Rich Matheisen MCSE&I, Exchange MVP

The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailabl. If this problem persists, contact your network administrator.

Hi,
When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
"The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
If this problem persists, contact your network administrator."
It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
But it is working in Firefox.
Please help me on how to fix this issue.
Thanks.

Hi Htet,
Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
Thanks
Daniel Yang
TechNet Community Support

"The server responded with an error. The server is currently unreachable or the connection was blocked"

Hi, since this morning i receive this message on my Mac Air (10.8.5) when i open iCal (which is synced through iCloud): "The server responded with an error. The server is currently unreachable or the connection was blocked". You know what it can be?
Thanks for your help!

Are you behind a firewall at work or elsewhere? Does you calendar sync with some other system like google (could be the google server is not responding)? All we know from the message is that your mac cannot reach the server. Maybe try later. Are you using wifi or have an ethernet connection to the router?

How to create a file in server's current directory

hi,
I have a project, but when i will run my program on internet Explorer then
it will create a folder in server's current directory, but i will not specify
drive & folder, it will create a folder in server's current directory, after that
i will read file from that, what will be the solution of this ? Is there
anyone who can give me solution? PLease help me
With regards
Nahar

ServletContext context = session.getServletContext();
String realContextPath = context.getRealPath(request.getContextPath());this will give you access to the servlets current directory
from there you can create a file
I dont know how much this will help

I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

Getting used to changes in the finder. I finally did see the Adobe Patch installer and am able to update applications individually. Should be able to attend to the main apps I use w/o further difficulty. Thnx for the help.

[WHAT] Application Loader is currently unavailable

I have been trying all day to submit an App to the App Store, and I have taken all the necessary steps required, but everytime I open Application Loader, I get the following error:
*Application Loader is currently unavailable*
We're having trouble connecting to the iTunes Store. Please try again later.
+An error occurred talking to the iTunes Store+
I am using the latest beta of xCode 3.2.5 with iOS 4.2 beta 3. The version of Application Launcher, is 1.4 (92). Anyone else having this problem? I can't seem to find a solution anywhere. Maybe the servers are just down, but I find that hard to believe...

may i ask something?
i'm having the same aforementioned issue, i have the iTunes Connect setup, and i produced an upload-ready zipped binary package from XCode 3.2.3.
my App is in the ( waiting for upload ) state, and Application Loader is the only way to upload anything it seems, there is no direct documentation about this issue, and no express lane category for itunes connect, what should i do ??

HT4623 In my iphone currently there is ios 6.1.2 .. if i update it into 6.1.3 can i have to do repurchase or reinstall all the applications that are currently working on ios..?

In my iphone currently there is ios 6.1.2 .. if i update it into 6.1.3 can i have to do repurchase or reinstall all the applications that are currently working on ios..?

Perform the Update using iTunes on the computer you usually Sync and Backup to...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

Application server queue overflow,application server overloaded currently

Similar Messages

Maybe you are looking for