Application server will "dies" after configuring Portal

I have 9iAS Rel 2 installed I configure protal after the installation runs. The infastructure is on a seperate machine and runs fine. For a few minutes the portal is up and running then the whole thing shuts down. I cannot connect to port 444, 1810 or the portal. It just says the page cannopt be displayed. Any suggestions?

Check out the correct port entry in portlist.ini, in <iASHOME>/install/ directory.
Thanks
Sachin.

Similar Messages

Exchange Server Restarts Automatically After Configuring Allowed Kerberos Encryption Types

Hi,
Our Exchange 2013 SP1 servers are installed on Windows Server 2012 R2. After configuring "Network security: Configure encryption types allowed for Kerberos" to AES256_HMAC_SHA1
only. The Exchange Servers began rebooting automatically. But after adding RC4_HMAC_MD5, the issue stopped.
Does this means that Exchange 2013 SP1 requires RC4_HMAC_MD5 as an allowed Kerberos encryption type?

this will help you to understand...
http://blogs.msdn.com/b/openspecification/archive/2011/05/31/windows-configurations-for-kerberos-supported-encryption-type.aspx
Thanks Prem P Rana MCSA Messaging 2003 MCSE 2003 Server MCTS MCITP Exchange 2007, 2010 Gurgaon, India http://blogs.msexchange-experts.com

Application server will not start up

Hello,
I have read quite a few topics concerning this problem, and have tried many things but without success.
I am running on Windows XP Pro. The installation goes fine, but when I run a project, the application server cannot start, and I get a message after quite a long time saying that it can't start and to check my port numbers,etc.
I used to have Sun Java Creator, but I uninstalled it. I tried deleting the \Windows\System32\productregistry file. I tried uninstalling completely and reinstalling in C:\Sun\Creator2, but the problem is still the same. I tried deleting the domain with "asadmin" and recreating it, but I still get the problem.
I am posting all the relevant information from the logs, hopin someone will be able to help me out....
C:\Sun\Creator2ea2\install.log
(Jan 14, 2006 3:34:36 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (coreFiles)
(Jan 14, 2006 3:35:42 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (jdkFiles)
(Jan 14, 2006 3:36:32 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (appserverFiles)
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Install Application Server Action (bean4)
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, #
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, # Wizard Statefile generatd by make_statefile.sh
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, #
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, # Wizard Statefile section for Sun Java System Application Server
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, #
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, [STATE_BEGIN Sun Java System Application Server 42cc62066aa69c151b1093bfcb735f8e112358e8]
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, defaultInstallDirectory = C:\Sun\Creator2ea2\SunAppServer8
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, currentInstallDirectory = C:\Sun\Creator2ea2\SunAppServer8
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, JDK_LOCATION = C:\Sun\Creator2ea2\java
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASADMIN_USERNAME = admin
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASADMIN_PASSWORD = adminadmin
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASADMIN_PORT = 24848
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASWEB_PORT = 28080
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_HTTPS_PORT = 21043
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, STORE_ADMIN_AUTH = FALSE
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, ADMIN_PASSWORD_ENCRYPTED = FALSE
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, CREATE_SAMPLES_DOMAIN = FALSE
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, CREATE_DESKTOP_SHORTCUT = FALSE
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, [STATE_DONE Sun Java System Application Server 42cc62066aa69c151b1093bfcb735f8e112358e8]
(Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, Installing Application Server...
(Jan 14, 2006 3:37:58 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1,
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Extracting installation files...
Launching Java(TM) 2 Runtime Environment...
Deleting temporary files...
"exitcode = 73"
(Jan 14, 2006 3:37:58 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, Finished
(Jan 14, 2006 3:37:58 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Post Install Core Action (postInstallCoreAction)
(Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpecTed output: "C:\Sun\Creator2ea2\bin\storagebuilder.bat"
(Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, preparsing C:\Sun\Creator2ea2\rave2.0\core\rowset.jar
(Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Temp\mdrstorage\storage
(Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, ... done
(Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, preparsing C:\Sun\Creator2ea2\rave2.0\core\sqlx.jar
<SNIP>
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpected output: "C:\Sun\Creator2ea2\bin\pe-init-tray.bat"
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Sun\CREATO~1\\rave2.0\startup\lib\Windows-i386\jdic_0_9.jar
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Sun\CREATO~1\\rave2.0\startup\lib\Windows-i386\LICENSE.jdic_0_9
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Sun\CREATO~1\\rave2.0\startup\lib\Windows-i386\tray.dll
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, 3 fichier(s) copi�(s).
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, 1 fichier(s) copi�(s).
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Avertissements de compilation :
(Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 31: L'attribut 'classname' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpected output: "C:\Sun\Creator2ea2\bin\pe-start.bat"
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, WARNING: The adminpassword option is insecure and should not be used since it can compromise your password. Please use either the command prompt or the passwordfile option.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Domain creator created.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Starting Domain creator, please wait.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Log redirected to C:\Sun\Creator2ea2\SunAppServer8\domains\creator\logs\server.log.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Timeout waiting for domain creator to go to starting state.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Avertissements de compilation :
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 44: L'attribut 'debug-options' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 61: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 72: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 83: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 104: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 115: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 126: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 144: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 155: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
(Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, CLI156 Could not start the domain creator.
(Jan 14, 2006 3:45:41 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpected output: "C:\Sun\Creator2ea2\bin\deploy-ejbs.bat"
(Jan 14, 2006 3:45:41 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, WARNING: The password option is insecure and should not be used since it can compromise your password. Please use either the command prompt or the passwordfile option.
(Jan 14, 2006 3:45:41 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
etc.
etc.
Hope I haven't drowned you with this log....
Thanks,
Raphael

Here's a bit more information : the output of the C:\Sun\Creator2ea2\SunAppServer8\domains\creator\logs\server.log file :
[#|2006-01-14T15:42:08.188+0100|WARNING|sun-appserver-pe8.1_02|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop. Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components. |#]
[#|2006-01-14T15:42:08.198+0100|INFO|sun-appserver-pe8.1_02|javax.enterprise.tools.launcher|_ThreadID=10;|
C:/Sun/Creator2ea2/java\bin\java
-client
-XX:PermSize=32m
-XX:MaxPermSize=128m
-XX:+CMSPermGenSweepingEnabled
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/logs/server.log
-Djava.endorsed.dirs=C:/Sun/Creator2ea2/SunAppServer8/lib/endorsed
-Djava.security.policy=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/server.policy
-Djava.security.auth.login.config=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/keystore.jks
-Djavax.net.ssl.trustStore=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/cacerts.jks
-Djava.ext.dirs=C:/Sun/Creator2ea2/java/jre/lib/ext;C:/Sun/Creator2ea2/SunAppServer8/domains/creator/lib/ext
-Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
-Dcom.sun.aas.configName=server-config
-Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
-Ddomain.name=creator
-Djmx.invoke.getters=true
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
-Dcom.sun.aas.promptForIdentity=true
-Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
-Dcom.sun.aas.instanceRoot=C:/Sun/Creator2ea2/SunAppServer8/domains/creator
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
-Dcom.sun.aas.domainName=creator
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dproduct.name=Sun-Java-System/Application-Server
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
-Dcom.sun.aas.configRoot=C:/Sun/Creator2ea2/SunAppServer8/config
-Djava.library.path=C:\Sun\Creator2ea2\java\jre\bin\client;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\java\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;C:\Program Files\Borland\BDS\4.0\Bin;C:\PROGRA~1\Borland\CBUILD~3\Bin;C:\PROGRA~1\Borland\CBUILD~3\Projects\Bpl;C:\Oracle\OraHomeAPISOFT\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\Program Files\Borland\Delphi7\Bin;C:\Program Files\Borland\Delphi7\Projects\Bpl\;C:\PROGRA~1\Borland\CBUILDER5\Projects\Bpl;C:\PROGRA~1\Borland\CBUILDER3\bin;C:\PROGRA~1\Borland\CBUILDER5\bin;C:\PROGRA~1\Borland\CBUILDER\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\WinSCP3\;C:\Program Files\Fichiers communs\GTK\2.0\bin;C:\Tools;C:\Program Files\vPoint_XP;C:\Program Files\Sybase\SQL Anywhere 9\win32;C:\Program Files\Sybase\Shared\win32;C:\Program Files\Sybase\SQL Anywhere 9\drivers;C:\Program Files\Sybase\Shared\Sybase Central 4.3\win32;C:\SuperWabaSDK\SuperWabaSDK\bin;C:\Java\Ant\bin\;c:\JbuilderX\jdk1.4\bin;C:\Java\SuperWabaSDK\qrfSQL\win32;C:\Java\SuperWabaSDK\WExtLib\jni\VC\Release;C:\Java\FirebirdSQL\jaybird.dll;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\SOTI\MobiControl;;C:\Documents and Settings\Microtec\Mes documents\Borland Studio Projects\Bpl;C:\PROGRA~1\FICHIE~1\ORACLE\BIN
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-cp
C:/Sun/Creator2ea2/java/lib/tools.jar;C:/Sun/Creator2ea2/SunAppServer8/lib/appserv-rt.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\activation.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\admin-cli.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-admin.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-cmp.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-env.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-ext.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-jstl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-upgrade.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\commons-launcher.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\commons-logging.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\dom.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\driveradapter.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\j2ee-svc.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\j2ee.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jax-qname.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxr-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxr-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxrpc-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxrpc-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jdic_0_9.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jmxremote.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jmxremote_optional.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jsf-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jsf-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\mail.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\PEtray.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\relaxngDatatype.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\rmissl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\saaj-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\saaj-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smbase.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smdb2.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\sminformix.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smoracle.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smresource.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smspy.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smsqlserver.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smsybase.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smutil.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\xalan.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\xercesImpl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\xsdlib.jar;C:/Sun/Creator2ea2/SunAppServer8/lib/install/applications/jmsra/imqjmsra.jar;C:/Sun/Creator2ea2/SunAppServer8/imq/lib/jaxm-api.jar;C:/Sun/Creator2ea2/SunAppServer8/imq/lib/fscontext.jar;C:/Sun/Creator2ea2/SunAppServer8/lib/ant/lib/ant.jar;C:/Sun/Creator2ea2/SunAppServer8/pointbase/lib/pbclient.jar;C:/Sun/Creator2ea2/SunAppServer8/pointbase/lib/pbembedded.jar
com.sun.rave.tray.RavePEMain
start
display
native|#]
*** EXITING ERROR:
Can't create Java VM
***

How application server will take more database connection than specified

Hi,
       While configure the datasource we have specification's/properties for
        1)Initial Connection (for ex. 1)
        2)Maximum Connection(for ex. 120)
        But we donot know how the SAP Server will take the connection after it reached to maximum connection, There is not propery which tell us to to create new connection.
        Can anyone tell me the process to increment the connection's or how the server behave after it will reach to maximum connection.
Thanks,
Nitin Uikey

SQL server cannot accommodate 50k update statements simultaneously from 50k sessions. As others have stated, the physical active session limit of the platform is ~32k, and if you genuinely want that out of the box with load balancing on a single db at that
kind of scale then sql server 2008 r2 is the wrong platform.
For what it's worth, Minimum memory overhead per connection will help you work out what your minimum memory requirements are. Note that it's variable dependent
upon the network packet size, which is partially a configuration question, partly one of instruction (byte size of actual db interactions) and finally the size of the actual workload being generated by the session.
Number of processors, and indeed what their capabilities are, that's entirely up to you. To facilitate such a high number of connections concurrently in all honesty I think your network stack is a bigger concern. There is no single golden configuration
for SQL Server, certainly not something that could win a pub quiz with the details provided. While it would be possible to design a theoretical configuration on paper without resorting to building the tin, I can imagine the numbers you come up with might be
a little difficult to build. Just ask Amazon!

Mac OS 10.4.4 Application Server Will Not Start

Installed Mac 10.4.4 last night. The Applicaton Server worked for all my projects. Now I cannot start the Application Server in Creator or Creator 2 ea2.
Another possible problem is that I was running both Creator and Creator 2 ea2 at the same time, but neither will launch the App Server now with the other not running.
Has anyone successfully launched the App Server in Mac OS 10.4.4?
Any other ideas?
Thanks,
Bill

Hello Sakthi,
Thanks for the help. I got the server running again by finding yet another instance of Creator and started up the Server successfully. Strangely enough, all the other instances of Creator then were able to start up (now one at a time). Another thing, when the server was not starting up it was using different port numbers than normal.
Error:
[#|2006-01-11T17:12:10.079-0500|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.tools.admin|_ThreadID=17;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2006-01-11T17:12:36.979-0500|WARNING|sun-appserver-pe8.1_02|javax.enterprise.resource.resourceadapter|_ThreadID=18;|RAR5038:Unexpected exception while creating resource|#]
[#|2006-01-11T17:12:36.980-0500|WARNING|sun-appserver-pe8.1_02|javax.enterprise.resource.resourceadapter|_ThreadID=18;|RAR5117 : Failed to obtain/create connection. Reason : Connection could not be allocated because: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 29093.|#]

Application Server cannot start after restart

Dear all,
I have a database cluster with SAP CI running on 2 servers(on SAN), plus 4 applications.
Today we have restarted all the servers, and found that only 1 server with database server and application server (w/CI) can start. All other applications servers cannot start, and in SAP Management Console, it does not show the SAP Instance.
Another problem is that the database cluster cannot move to another server, with error:
"initerrlog: Could not open error log file 'M:\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'. Operating system error = 3(The system cannot find the path specified.)."
Can anyone provide any assistant? Many thanks!
Regards,
Daniel

Hi Yaroslav,
In Application Server, Not started.
Log(1):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
Log(2):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
Log(3):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
sapgrp\sapmnt\PRD\SYS\profile\START_D21_sapapp1. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
For SQL Server(The one which Cluster cannot move group to):
Log(1):
The description for Event ID ( 35712 ) in Source ( SAPPRD_01 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: , , , , , , , , , , r, e, c, v, 1, 0, 0, 5, 4, , , , , , , , , , , , , , , , , , , , N, i, I, R, e, a, d, r, e, c, v, , , , n, i, x, x, i, ., c, p, 4, 2, 4, 5, , , , , , , , , , , , , , , , , , , , , , , , , , , recv10054 NiIReadrecv nixxi.cp4245.
Log(2):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAP Service SAP???_?? has been stopped successfully..
Log(3):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Initialization failed. Service not started. [ntservmain.cpp 1269].
Log(4):
The description for Event ID ( 0 ) in Source ( SAP???_?? ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Cannot open Profile
sapgrp\sapmnt\PRD\SYS\profile\START_D20_sapdb2. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 902].
Regards,
Daniel

Application Server will not shutdown-Tuxedo 8.1

We run Tuxedo 8.1 (Patch 291), on Windows 2003 and shutdown the system nightly for PS Portal database refresh. Over the last couple of months both Application Servers are having issues shutting down our Portal environment.
Tuxlog is reporting various errros including:
ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed
ERROR: Message operation failed because of the invalid message queue identifier
ERROR: System lock semop failure
Any insight is appreciated
Thanks/Peter

If the app server was okay before and this problem started some where in between, then you may try this. Kill all java.exe processes and restart IDE & Servers.

SNC configuration in multiple application server environment

Hello Experts,
We are planning for SNC configuration between ECC 6 and NW04s Portal systems.
ECC 6.0 is running with Central Instance and two application servers.
NW04s EP is running with 4 server nodes.
I am very much clear about setting up SNC between ABAP and JAVA running with single application server and server node.
But totally confused about SNC/SSL setup in multiple server environment. Would really appreciate if you can provide some ideas/docuements on setting up SNC/SSL in multiple server environment.
1. Do we need to create multiple PSE for each of the ABAP application server? If yes then would the CN should be same or different.
2. If we create only one PSE for central instance and copy this to other application server - will this work.
Looking forward to hear from your experiences.
Regards
Davinder

Hi,
Please check the link http://help.sap.com/saphelp_nw04/helpdata/en/69/b0bbd6dde71141bee8806586144796/frameset.htm
Regards,
Gowrinadh

How to integrate Oracle Portal running on Oracle Application Server 10.1.2

I have an Oracle Portal running on a Oracle Application Server 10.1.2.
Portal is responsible ( along with OID ) for the users authentication and authorization.
There is a new JEE application that was developed recently, which the Portal users must have access to.
HOW can I put a link into a page of the Portal, that redirects the portal user to a new browser window displaying my new application?
HOW can this new application, running in a separate weblogic 11g (10.3.5) server, automatically authenticate with the same username/password previously authenticated when the user logged into the portal?
Any ideas?
I´ve already thought in a bunch of ways to do it:
- put a link into the portal with a sessionId, then when opening the new app, it automatically tries to use the same session. How can I configure this session id during the creation of the portal's page? How can I use it from the new app to use the same session?
- put a link into the portal with a userid, then when opening the new app, it automatically tries to authenticate using a different authentication provider configurated in WL, which points to Portal´s OID. In this situation, how can I ensure that the user is already logged in and the session has not timed out?
- Should I use OSSO?
- Should I use OAM?
Any help would be appreciated!
Murilo

Hi Murilo,
A portletized version of your J2EE app would probably have been ideal for your purpose as it would handle both authentication (through SSO) and session information (through Portal framework as the framework can pass session information to the provider/producer). This would require changes to the application however.
Easiest approach would be to use mod_osso to protect your J2EE application. SSO would then handle the authentication for your Portal and your J2EE application.
Thanks,
EJ

Displaying pdf files in Portal from application server.

Hi,
I have a requirement where i will give a link on the portal for Provident Fund related data. When the user clicks on the link, i have to retrieve his pdf file from the folder stored on the application server and display it in portal. Could you please tell me how to do it?
Also can we use Knowledge Management for it? If yes, how to do it?

Hi,
This can be done by
1. Store the pdfs in the server like userid.pdf. Or you can add the year also the the file name. The files can be in the same appserver. No need for KM.
2. Create a Webdynpro application where the WD automatically reads user ids of the person logged in (IUser).
3. In the Webdynpro code create a LinkToURL element with the user id you got in step one. This will make sure that somebody cannot see others file.
Regards
Srini

WebLogic Server doesn't start after configuring a Custom Realm

Hi,
We are having problems getting WebLogic server to startup after configuring a
Custom Realm. It outputs the error message "User System not authorized to boot
WebLogic Server. Security Excpetion".
For debugging purposed we had our Custom Realm classes output some debug statements
to the console. From the output it was apparent that all the users were getting
authenticated properly including System, Administrator, wliSystem etc. But after
the initial authentications we get this error message. I am attaching the log
file for your reference. Do we have to implement Authorization also (by implementing
ACLImpl) in the Custom Realm. Our Custom Realm was planned to be used only for
authentication.
Appreciate any feedback on the cause of the problem.
Thanks
Vikram
[test.log]

Thanks Deyan. I will give it a try and let you know.
"Deyan D. Bektchiev" <[email protected]> wrote:
Vikram,
You should make your user that you use to startup the server a member
of
the Administrators group.
In other words there should be a Principal "Administrators" in the
Subject that your LoginModule returns.
I'm not sure if you can configure this afterwards but this is how it's
done out of the box.
Dejan
Vikram wrote:
Mike,
We are working with a Platform domain on Weblogic 7.0. When you implementa custom
realm it can be implemented just for authentication and not for authorization.
In our case we used the Custom Realm only for authentication. ACLs storeall the
authorization information. We assumed that the standard Weblogic useraccounts
like system, administrator are already part of the ACLs with the appropriateprivileges.
Please let me know if you have any suggestions.
Thanks
Vikram
"mike" <[email protected]> wrote:
You mix up authentication and authorization. The fact that a user is
a valid user
(authentication) does not guarantee that he/she can perform a certain
action (authorization).
The second is defined by ACLs or something, which is probably (most
likely)
not
set in your case. To go on ranting I need to know which version youare
on (looks
like 7, grey area for me).
"Vikram" <[email protected]> wrote:
Hi,
We are having problems getting WebLogic server to startup after configuring
a
Custom Realm. It outputs the error message "User System not authorized
to boot
WebLogic Server. Security Excpetion".
For debugging purposed we had our Custom Realm classes output some
debug
statements
to the console. From the output it was apparent that all the userswere
getting
authenticated properly including System, Administrator, wliSystemetc.
But after
the initial authentications we get this error message. I am attaching
the log
file for your reference. Do we have to implement Authorization also
(by
implementing
ACLImpl) in the Custom Realm. Our Custom Realm was planned to be used
only for
authentication.
Appreciate any feedback on the cause of the problem.
Thanks
Vikram

Migrating Oracle forms and reports from 6i to 10g Application server on Uni

HI Guys,
We are migrating from Oracle forms and reports 6i to 10g.
We will be having application server on Unix box.
I understand following will be the changes i will have to do in this respect -
1. Fonts are to be revisited only Java fonts are supported.
2. Obsolete items, function calls, triggers are to be removed.
My question is since this application can be cross platform application,
Can anyone provide me with changes that I will have to do with configuration files like -
1. Formsweb.cfg,
2. forms.conf
3. default.env
4. registry.dat
Keeping in mind that the application server will be on unix box.
Thanks,
Av.

Java fonts are only supported for the Forms version.
You can use your own fonts for Reports however, there is some legwork to do this. I know because I just went through it.
If you will only being using the PDF output (which for me replaced the Preview mode that existed in 6i), then you have to install the TTF for the missing font, an AFM (use the ttf2pt1 utility to generate the AFM file, but make sure you remove the AFM extension when moving it to Unix). You'll want to use the PDF Subset in the uifont.ali (which exists under the ORACLE_HOME/guicommon/tk/admin directory and add the line underneath the PDF Subset "Font Family Name"="TTF Font Name" The font family name is found when you open the AFM file in textpad or wordpad for the font you generated. This is what you enter. The TTF Font Name is the name the TTF font. You'll have to restart Reports Server after this.
If printing to the printer directly is an option you must have, I will tell you it does not work in Linux right now. You can print to the printer but if the font doesn't exist on the internal memory of the printer, it won't work. There are 3rd party utilities like ORARRP and PDFPrint that can take care of this but, each has its own limitations. The one thing I found with ORARRP is if you generate a Report with an RRPA file extension and open it on Windows, it works great, the printer dialog comes up asking you what printer you want to print too. However, if you call this in Linux/Unix with the filename, it brings it up in the web browser but doesn't prompt you for your printer to print too automatically. So, for me, it's a show stopper. My only other option is to install the fonts on the printer that are missing.
As for the files you want to change, you'll obviously have to make changes to the formsweb.cfg, default.env, forms.conf. I have to modify the reports.sh for some PL/SQL attached libraries to make sure it picks them up. I did have to modify Registry.dat.
There is alot of work but mainly forms wasn't too bad, unless you had fonts that weren't supported. Usually there is another font that you can use to replace the old one but you have to know which fonts exists on the server and try all the keys on the keyboard to find the corresponding keystroke.
Hope this helps.
Chris

Install PeopleTools 8.53 with Linux Issue: Boot Application Server Domain PT853 using psadmin

Folks,
Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Database 11gR1. OS is Oracle Linux 5.
I confront the issue regarding booting Application Server Domain PT853 while Database Server is listening as below:
[user@userlinux PT8.53]$ . ./psconfig.sh
[user@userlinux appserv]$ export SYSTEM_PASS=SYS/SYS
[user@userlinux appserv]$ export ORACLE_HOME=/home/user/OracleDB_Home
[user@userlinux appserv]$ export ORACLE_SID=PT853
[user@userlinux appserv]$ export TUXDIR=/home/user/Oracle/Middleware/tuxedo11gR1
[user@userlinux appserv]$ export LD_LIBRARY_PATH=$TUXDIR/lib:$LD_LIBRARY_PATH
[user@userlinux appserv]$ export PATH=$TUXDIR/bin:$PATH
[user@userlinux appserv]$ ./psadmin
Its output gets 2 errors in the current server log file /home/user/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0919.LOG as below:
First, GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
Second, GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
I create a symlink in /home/user/OracleDB_Home/lib and /lib32 as below:
[user@userlinux lib]$ ln -s libclntsh.so.11.1 libclntsh.so.8.0
[user@userlinux lib32]$ ln -s libclntsh.so.11.1 libclntsh.so.8.0
After that, I run ./psadmin to boot the domain PT853 again, I see the first error is solved. Now, there is only one error in the current server log file /home/user/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0924.LOG is below:
GenMessageBox(0, 0, M): Database Signon: Invalid user ID or password for database signon. (id=MyOwnerName)
Server failed to start
I have changed UserId as PSADMIN in Configuration file, purge cache and clean IPC resources and reboot. Password is correct. But the error always indicates id=MyOwnerName.
Application Designer login as PSADMIN successfully. Data Mover Bootstrap login as MyOwnerName successfully.
My question is:
Why both PSADMIN and MyOwnerName are invalid user ID or password for database signon ? How to solve the issue ?
Thanks.

As stated in the installation manual there are a few prerequisites in chapter CHAPTER 8B Configuring the Application Server on UNIX page 238
Prerequisites
Before beginning this procedure, you should have completed the following tasks:
Installed your application server.
          See "Using the PeopleSoft Installer," Understanding PeopleSoft Servers
Installed Tuxedo 11gR1
     See "Installing Additional Components."
Granted authorization to a PeopleSoft user ID to start the application server.
     The database configuration procedure includes a step for setting up the user ID with authorization to start
     the application server. See the application-specific installation instructions for information on the user IDs
     for your PeopleSoft application. See the PeopleTools: Security Administration product documentation
     for information on PeopleSoft PeopleTools delivered user profiles.
     See "Creating a Database on UNIX," Running the Database Configuration Wizard.
     See "Creating a Database Manually <on Windows or UNIX>," Creating Data Mover Import Scripts.
Run the following SQL statements on your database server to review and if needed, update the PSCLASSDEFN table:
     SELECT CLASSID, STARTAPPSERVER FROM PSCLASSDEFN
     WHERE CLASSID IN (SELECT OPRCLASS FROM PSOPRCLS WHERE OPRID='<OPRID>');
     UPDATE PSCLASSDEFN SET STARTAPPSERVER=1 WHERE CLASSID='<CLASSID>';
Note. Installers typically use VP1 or PS to test the application server. If these users are deleted or their
passwords are changed, the application server will no longer be available. To avoid this problem, you can set
up a new operator (called PSADMIN or PSASID, for instance) with privileges to start the application server.
If you do this, you can use the new operator for your servers and you won't need to change the
password each time VP1 or PS is changed.
Does you user have privileges to start the applications server.
Also pay attention to the connectid configuration in the application server. This should be the same connectid and password as you provided during the database creation script connect.sql

Need an advice in Oracle Application Server

Dear all,
I need your advice.....
What I have:
- 2 servers (Windows 2008 R2 64bit) .. planned as Application Servers
- Oracle 11g Database installed in a server
- forms (.fmx) , reports (.rdf) , compiled using Oracle 10g DS R2
- Oracle 10g Developer Suit R2
What I want:
- Install Oracle Application Server in the 2 servers available (Windows 2008 R2)
- make sure all (.fmx & .rdf) will work im these 2 servers
- take advantage of the powerful servers
What I did:
- Install Oracle 10g AS R2 in both servers
- configure webcache balance
What I faced:
- both servers worked fine except:
- (.fmx) files cannot be cached
- slow while opening (.fmx) files
- AGAIN, SLOW
ADVICE??
- Do I need to continue using this installation OR
- Is there any better installation & configuration that will help get (What I want:)
Kind Regards

Hi zzalabri,
I know i have replied it late,
Oracle Web Cache uses cacheability rules to store documents. These rules fall into two categories:
1)Rules for static content, such as GIF, JPEG, or static HTML files
2)Rules for dynamically generated content created using technologies like Java Server Pages (JSP), Active Server Pages (ASP), PL/SQL Server Pages (PSP), Java Servlets, and Common Gateway Interface (CGI).
How can I make my server caches .fmx files using webcache (( webcache is configured already but it says "URL contains query string"))..
The below link would be helpful for setting caching rules for Oracle Webcache
http://docs.oracle.com/cd/B15904_01/caching.1012/b14046/cache.htm
Is there any configuration for Application Server 10g R2 AFTER the fresh installation OR it works as it is ..
The default installation is self tuned to handle a load of approximately 200 users(it depends on network as well as ur DB)
I knew for sure what makes my server slow, that is because of background images in fmb & fmx files. when I removed them it became fast enough.
In my environment,i used to staore all this images in gif format(images size max would be 50kb)then store all these images in a jar file and load this jar file through archive_jini(Formsweb.cfg)
Hope this would be helpful,
Regards
Fabian

How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete

Application server will "dies" after configuring Portal

Similar Messages

Maybe you are looking for