Application start verry slow

It takes an APEX applications on Windows Home Server 2003 a long time (+/- 70 sec.) to response when accessed through the internet. When the same application is started by the network it is very fast.
In the router I forwarded the ports 8080, 2030 en 1521 to the server. The shared_servers is set to 5.
Application
Edited by: WebMees NL on Jul 9, 2009 7:12 PM

There are a lot of things to check here:
1) Server networking settings
2) Router settings for internal network (including DNS forwarding)
3) ping time from external source to server (may indicate lag)
4) DNS resolution from external source to server
5) DNS resolution from server to external network
and more
I run an APEX application over a distributed VPN and I only see a couple of seconds of lag, tops, so something is definitely not right.

Similar Messages

APEX application starts very slow

Hi all,
I have developed a small apex application for my website. I am running this application on OracleXE. Every time I when I log in the response is extremily slow. It will take approx. 1 min before the login page appears, then it takes another 20 sec. before the homepage appears. After that you can notice that the application is getting faster and faster. If I stop working with the application and I start working again after 1 hour the same thing happens.
I log in localy, not thru my website, but I can imagine that people that approach the application thru the website will experience the same.
What is causing this ? Is the database going into some sort of 'sleeping mode' ?
How can I prevent this ? The database is (ofcourse) running 24/7. Any help will be appreciated, because people will stay away when everytime the responsetime is as long as 1 min before they can login.

This seems to be a issue specific to Oracle XE
See Re: Workaround to keep users happy

Slow application start up

Am experiencing slow application start up. Running Yosemite 10.10.2

This might be due to several reasons.
1. Your computer might have a small flash storage, which means it is slower in general.
2. The application you are starting up are large applications (e.g. iMovie, iPhoto...).
3. You might have used up most of your hard disk capacity, and this usually slows down the computer.
4. Your computer might simply be old.
Can you give me a little more information on when you bought the computer and what applications you are trying to open?
Yi

My 2010 MacBook Pro started running slow a few days ago and is getting worse. I have run a report with EtreCheck that I can post. Can someone please help me figure out what's wrong and how to fix it. Thank you.

Problem started after I unintentionally downloaded some adware 4 days ago. After lots of aggressive ads slowed down my browser I downloaded and ran AdwareMedic which seemed to do the job and browser was back to normal. Then, possibly a coincidence, everything on the computer started running slower. I've backed up everything and have run a EtreCheck report.

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Pulseaudio starting very slow

For some reason, pulseaudio is starting very slow on my system, even when it was a fresh install.
I was seeing very bad startup performance with several programs: firefox, hotot, etc. I did an strace on them and found they were stuck on waiting for a PID associated with pulse for about a half minute. When I turned off autospawn in the pulse config file, these programs loaded instantly, even if I put
pulseaudio --start
in my i3 config.
I'm not familiar enough to know how to debug this. Does anyone have any ideas of what I could do to get more information?
My sound devices are the integrated audio from my motherboard (Intel), my Nvidia graphics card, and my webcam (HD Dualpix).

Hi..
Not enough free space on the disk can slow the system down.
Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
Try removing login items. Open System Preferences > Users & Groups then select the Login Items tab. Remove all items.
And go to HD > Library > StartupItems. Remove all items from the StrartupItems folder.
Check the startup disk.
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk.
Be aware, OS X Recovery requires a high speed broadband connection.
And backup all your important files before repairing or restoring OS X just in case.

Hello! My MacBook Pro has suddenly started running slow.

Hello!
     I've had my MacBook Pro for since 2011 and it has suddenly started running slow. This has been going on for a month. I've restarted my MacBook several times and even shut it down when I know I will not be using for the remainder of the day. I've tried numerous things to make it run faster including deleting useless files like text documents, pictures, videos, etc. I currently have 92.67GB free of 500GB . I've noticed that when it gets hot it starts running slow or when I play a video game and sometimes when I play videos online.
MacBook Pro (15-inch, Late 2011)
Processor: 2.2 GHz Intel Core i7
Memory: 4 GB 1333 MHz DDR3
Graphics: Intel HD Graphics 3000 384 MB
OS X Yosemite 10.10.1 (14B25)
I've already used Etrecheck to hopefully speed up the process of help.
EtreCheck version: 2.1.8 (121)
Report generated February 3, 2015 at 5:14:44 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Late 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,2
    1 2.2 GHz Intel Core i7 CPU: 4-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 834
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1440 x 900
    AMD Radeon HD 6750M - VRAM: 512 MB
System Software: ℹ️
    OS X 10.10.1 (14B25) - Time since boot: 11:18:56
Disk Information: ℹ️
    TOSHIBA MK5065GSXF disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (92.64 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/hosts - Count: 30
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/VirtualBox
    [loaded]    org.virtualbox.kext.VBoxDrv (4.3.20) [Click for support]
    [loaded]    org.virtualbox.kext.VBoxNetAdp (4.3.20) [Click for support]
    [loaded]    org.virtualbox.kext.VBoxNetFlt (4.3.20) [Click for support]
    [loaded]    org.virtualbox.kext.VBoxUSB (4.3.20) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.leapfrog.codeless.kext (2) [Click for support]
    [not loaded]    com.leapfrog.driver.LfConnectDriver (1.8.1 - SDK 10.7) [Click for support]
    [not loaded]    com.mice.driver.PS3Controller (1.0.0d1) [Click for support]
    [not loaded]    com.motorola-mobility.driver.MotMobileUSB (1.2.0 - SDK 10.5) [Click for support]
        /System/Library/Extensions/MotMobileUSB.kext/Contents/PlugIns
    [not loaded]    com.motorola-mobility.driver.MotMobileMS (1.0.0 - SDK 10.5) [Click for support]
    [not loaded]    com.motorola-mobility.driver.MotMobileMTP (1.2.0 - SDK 10.5) [Click for support]
    [not loaded]    com.motorola-mobility.driver.MotMobileUSBLAN (1.2.0 - SDK 10.5) [Click for support]
    [not loaded]    com.motorola-mobility.driver.MotMobileUSBLANMerge (1.2.0 - SDK 10.5) [Click for support]
    [not loaded]    com.motorola-mobility.driver.MotMobileUSBSwch (1.2.0 - SDK 10.5) [Click for support]
Startup Items: ℹ️
    FxLicenseManager: Path: /Library/StartupItems/FxLicenseManager
    Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.security.cloudkeychainproxy.plist
    [running]    com.VTech.AgentMonitor.plist [Click for support]
    2 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.awdd.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nsurlsessiond.plist
    [killed]    com.apple.wdhelper.plist
    5 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.motorola.motohelper.plist [Click for support]
    [loaded]    com.motorola.motohelperUpdater.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.autodesk.backburner_manager.plist [Click for support]
    [running]    com.autodesk.backburner_server.plist [Click for support]
    [loaded]    com.autodesk.backburner_start.plist [Click for support]
    [loaded]    com.leapfrog.connect.shell.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [running]    com.motorola-mobility.mmcfgd.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [running]    com.VTechLLNService.plist [Click for support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
    [not loaded]    org.virtualbox.startup.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.codecm.uploader.plist [Click for support]
    [loaded]    com.divx.agent.postinstall.plist [Click for support]
    [failed]    com.facebook.videochat.[redacted].plist [Click for support] [Click for details]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.valvesoftware.steamclean.plist [Click for support]
    [not loaded]    jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Click for support]
    [not loaded]    org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
    uHD-Agent    UNKNOWN (missing value)
    PdaNetMac    UNKNOWN (missing value)
    Monitor    Application (/Applications/LeapFrogConnect.app/Contents/Monitor.app)
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    MotoCast    UNKNOWN Hidden (missing value)
    Launch Nikon Message Center 2    Application (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
    ConnectService    Application (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
    Content Manager Assistant    Application (/Applications/CMA.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 25 Check version
    GameFacePlugin: Version: GameFacePlugin 1.5.3.0 - SDK 10.5 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Unity Web Player: Version: UnityPlayer version 3.5.5f4 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    DivXBrowserPlugin: Version: 2.2 [Click for support]
    Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    EPPEX Plugin: Version: 3.0.5.0 [Click for support]
    DirectorShockwave: Version: 11.6.6r636 [Click for support]
User internet Plug-ins: ℹ️
    BlueStacks Install Detector: Version: Unknown
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    DivX Plus Web Player HTML5 <video>
    Twitter for Safari
    codec-M
    MacVeXe
3rd Party Preference Panes: ℹ️
    DivX [Click for support]
    Flash Player [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        10%    systemstats
         5%    WindowServer
         3%    AgentMonitor
         1%    ConnectService
         0%    AppleSpell
Top Processes by Memory: ℹ️
    399 MB    firefox
    107 MB    Finder
    94 MB    loginwindow
    86 MB    mds_stores
    64 MB    WindowServer
Virtual Memory Information: ℹ️
    368 MB    Free RAM
    1.69 GB    Active RAM
    794 MB    Inactive RAM
    1.16 GB    Wired RAM
    7.15 GB    Page-ins
    322 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 1, 2015, 04:01:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Google Earth_2015-02-01-160105_[redacted].crash
    Jan 31, 2015, 07:00:56 PM    /Library/Logs/DiagnosticReports/firefox_2015-01-31-190056_[redacted].cpu_resour ce.diag [Click for details]
    Feb 2, 2015, 05:53:21 PM    Self test - passed

If your Mac runs slowly:
http://support.apple.com/kb/PH19031?viewlocale=en_US&locale=en_US
Start up in Safe Mode. http://support.apple.com/kb/PH18760
Reset SMC.     http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836

My MacBook suddenly started running slow

Hello! I've had my MacBook Pro for since 2010 and it suddenly started running slow. This has been going on for a week already. I've restarted my MacBook many times and when I'm not using it I shut it down. I've tried many things to make it run faster and deleted 14k files that were mostly text documents, pictures, videos, etc. and deleted my whole iTunes library hoping it would work but nothing. I currently have 77.07 GB left but space has never been the problem since in the past I've had 10GB or to the point where I had no GB and it still ran perfectly. Two things I've noticed is that when it gets hot it starts running slow and also when I start watching videos on youtube or ones that are already in my MacBook. Last night I reset my SMC hoping it would work better and it only ran slow because of the heat but I see no change. I'm trying anything possible to fix this myself before taking it to the Apple Store and spending money on something I could've probably fixed myself.
Here's some information on my MacBook
MacBook Pro 13-inch, Mid 2010
Processor: 2.4 GHz Intel Core 2 Duo
Graphics: NVIDIA GeForce 220M 256 MB
Software: OS X 10.8.5 (12F45)

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|find tok|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

My iMac Mid 2010 Has Suddenly Started To Slow Down.

Hello,
My iMac has suddenly started to slow down. It was fine just a week ago.. Login time has increased, Applications take a while to start and they can sometimes make my computer unresponsive.
Finder freezes and so does safari.
I have deleted ALOT of old files and things i don't use anymore. I deleted my Windows Partition. I have also tried my options in disk utility but it seems to have not no effect. I also re-installed Mavericks.
I don't know what else to try. Please let me know if there is anything i haven't tried.
Specs:
21.5 Inch Mid 2010
3.2 GHz Intel Core i3
4GB DDR3
ATI Radeon HD 5670 512 MB

EtreCheck version: 2.0.11 (98)
Report generated November 23, 2014 at 11:42:49 AM PST
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2010) (Verified)
iMac - model: iMac11,2
1 3.2 GHz Intel Core i3 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
empty empty empty empty
BANK 1/DIMM0
empty empty empty empty
BANK 0/DIMM1
2 GB DDR3 1333 MHz ok
BANK 1/DIMM1
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 5670 - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:40:21
Disk Information: ℹ️
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 779.00 GB (193.97 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Configuration files: ℹ️
/etc/hosts - Count: 20
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.rim.driver.BlackBerryUSBDriverInt (2.2.7 - SDK 10.7) Support
[loaded] com.rim.driver.BlackBerryVirtualPrivateNetwork (1.0.18 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.BlackBerry.driver.USBCDCNCM (1.0.6 - SDK 10.7) Support
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[not loaded] com.mice.driver.Wireless360Controller (1.0.0d12 - SDK 10.8) Support
[not loaded] com.mice.driver.WirelessGamingReceiver (1.0.0d12 - SDK 10.8) Support
[not loaded] com.mice.driver.Xbox360Controller (1.0.0d12 - SDK 10.8) Support
[not loaded] com.quark.driver.Tether (1.1.0d4 - SDK 10.4) Support
[loaded] com.quark.driver.Tether64 (1.1.0d3 - SDK 10.6) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
[not loaded] org.walisser.driver.DWXBoxHIDDriver (1.3.4) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
Startup Items: ℹ️
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[invalid?] com.paragon.NTFS.auth.plist Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.lexmark.bmlaunchd.plist Support
[loaded] com.lexmark.lexnetlaunchd.plist Support
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[running] com.rim.blackberrylink.BlackBerry-Link-Helper-Agent.plist Support
[running] com.rim.PeerManager.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.mice.360Daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.rim.BBDaemon.plist Support
[not loaded] com.rim.nkehelper.plist Support
[running] com.rim.tunmgr.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox UNKNOWN (missing value)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
GarminGPSControl: Version: 3.0.1.0 Release - SDK 10.4 Support
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.0.0 Support
Google Earth Web Plug-in: Version: 6.0 Support
Unity Web Player: Version: UnityPlayer version 4.5.2f1 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Safari Extensions: ℹ️
Facebook Cleaner
YoutubeWide
Facebook Photo Zoom
3rd Party Preference Panes: ℹ️
Fan Control Support
Flash Player Support
Growl Support
Paragon NTFS for Mac ® OS X Support
XBox 360 Controllers Support
DWXBoxHIDPrefsPane Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      2% WindowServer
      0% fontd
      0% coreservicesd
      0% FanControlDaemon
      0% SystemUIServer
Top Processes by Memory: ℹ️
129 MB Safari
125 MB mds_stores
116 MB com.apple.IconServicesAgent
64 MB com.apple.WebKit.WebContent
52 MB Dock
Virtual Memory Information: ℹ️
1.97 GB Free RAM
1.28 GB Active RAM
434 MB Inactive RAM
614 MB Wired RAM
395 MB Page-ins
0 B Page-outs

Itunes starts extremely slow after an update of windows 8.1.

Itunes starts extremely slow after an update of windows 8.1.
It takes up to 10 minutus.
If I see the appliction log in event viewer then I see the following errors on the Bonjour service.
For instance:
Client application bug: DNSServiceResolve(a8:fa:d8:3a:1e:8f@fe80::aafa:d8ff:fe3a:1e8f._apple-mobdev2._t cp.local.) active for over two minutes. This places considerable burden on the network.
followed by
SendWakeupPacket error: sent -1 bytes: 10065
What can this be?
Already thanks,
John

I did all the step with save mode and that didn't gave the same result.
Then I created a new account and there itunes started up normally.
So I contued with the user section.
I removed the itunes directory from
c:\Users\username\AppData\Local\Apple Computer\iTunes
This gave the same result in not starting up.
Then I removed the itunes directory from
c:\Users\username\AppData\Roaming\Apple Computer\iTunes
The a popup appears that the Bonjour Service has been disabled.
I looked in services and saw that is was still running.
But I tried to restart this service and it took a long time to stop this service.
Even if I selected restart the Bonjour Service didn't start.
Manually starting was not a problem.
Clicking OK on the popup let itunes start quickly. And closing and starting it again was also quickly.
So Matt thanks for your answer.
If it happens again I have to see if it was the removing of the itunes directory from roaming or restarting the Bonjour Service.

G3 Pismo hangs at "Login Window Application Started"

Hello all,
I have been trying unsuccessfully to bring my Pismo back to life following replacing the (dead) PRAM battery. I took it to the Apple Genius Bar today. They were able to use their diagnostic goodies to see the hard drive, could not fix the problem, so re-installed Tiger....and it still will not boot.
When booted without anything more, it starts up fine, gets to the apple and spinning progress wheel, then goes to a blank blue screen and the hard drive stops.
When booted in Verbose mode, it hangs after printing 'Login Window Application Started' to the screen.
Of course this can't be the OS because it just got a clean re-install at the Apple store. Help?.....

It is the original HD that came with the machine (I bought it used from somebody who had taken very good care of it).
I am not saying that the HDD is the source of your issue, but you may want to consider it to be part of the issue. It doesn't matter how well it was cared for, as HDDs age their functionality decreases. The thin layer of lubricant on the platter thickens and becomes gummy with age and the interior heat of the computer. This spins out to the edges and causes the heads to stick, slowing up the drive. The hydroseal bearings almost literally float in lubricant, which also thickens with age and heat. The average life of an internal HDD is three to five years and if they survive past that range their performance continues to decline. I would certainly consider replacing the HDD.
I can't get it to boot from the CD. It gets to the login window and then that's all she wrote
That, too can be a function of age. I replaced the optical drive on my Pismo several years ago. I did the same for my daughter's Pismo. The issue could also be from a dirty or defective disk. Try a different disk to see if it works. If you have access to a second firewire Mac you can boot the computer from the optical drive of the other Mac with your Pismo in Firewire Target Disk Mode.
cornelius

Muse slow to start and slow to react to commands - only recenty observed, rest of system and programs are fine

Over the last week, since the problems loggin into the password server that authenticats the CC program login, the muse application is very slow to start and slow to resond to commands. Like its in molasses.
My system has not changed, only the normal windows updates have been applied.
Has anyone else seen this please ??

Bad form answering my own question, but I think I found the culprit, I installed, beacuse I thought it was a good think and might be useful, Google drive onto my system. After deinstalling this program, the sluggishness that I experienced within Muse, went away.
As this was the only new thing that I had installed, I think that it was the problem,

HP Pavillion p6-2213er started to slow down (the mouse, web, video and games)

My HP Pavillion p6-2213er which is 1-year old with pre-installed Windows 7 (64) started to slow down/stuck today.
The mouse, internet pages, movies and games started to work slow. Sorry, don't know the right English for it, but it looks like this: ---x---x---x (and normally it is xxxxxxxxxxxxx)
I made the full scanning for viruses: none. It's funny, but the problem started the next day after I installed anti-virus. Tried to delet the anti-virus. Didn't help. Task manager shows that none of the applications use much memory. There are no programs that could cause this running. I turned off torrent program. Restarted my pc several times, no result. Help? What the problem could be? I've had 3 different pc and never had that problem.
I've also had been seeing for few months that message about Tages Protection driver that was turned off due to its incompatibility with the system. Tried to reinstall it thru downloading the setup file from tagesprotection.com, but it just won't start. Can't delete it either, cause can't find it. But this can't be the cause of slowness, can it?

Today I also had BSoD for the 1st time. It happened twice as I was watching a video downloaded from the internet. Could it be somehow connected to what I experienced before?
Below are the details:
Сигнатура проблемы:
Имя события проблемы:                 BlueScreen
Версия ОС:                                          6.1.7601.2.1.0.768.2
Код языка:                                          1049
Дополнительные сведения об этой проблеме:
BCCode:                                               1000007e
BCP1:                                                    FFFFFFFFC0000005
BCP2:                                                    0000000000000000
BCP3:                                                    FFFFF8800419D8E8
BCP4:                                                    FFFFF8800419D140
OS Version:                                          6_1_7601
Service Pack:                                       1_0
Product:                                               768_1
Файлы, содержащие сведения об этой проблеме (files containing informtion about this problem):
C:\Windows\Minidump\051114-36847-01.dmp
C:\Users\Елена\AppData\Local\Temp\WER-61089-0.sysdata.xml

Application running too slow on sun T5440 but run normal on sun M3000

Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
Code:
bash-3.00# uname -a
SunOS 5.10 Generic_142909-17 sun4v sparc SUNW,T5440
Psrinfo -pv
Code:
bash-3.00# psrinfo -pv
The physical processor has 64 virtual processors (0-63)
UltraSPARC-T2+ (chipid 0, clock 1414 MHz)
The physical processor has 64 virtual processors (64-127)
UltraSPARC-T2+ (chipid 1, clock 1414 MHz)
The physical processor has 64 virtual processors (128-191)
UltraSPARC-T2+ (chipid 2, clock 1414 MHz)
The physical processor has 64 virtual processors (192-255)
UltraSPARC-T2+ (chipid 3, clock 1414 MHz)
/etc/system
Code:
set semsys:seminfo_semopm=10000
set semsys:seminfo_semmsl=10000
set semsys:seminfo_semmni=1024
set max_nprocs=50000
set msgsys:msginfo_msgmnb=2097152
set msgsys:msginfo_msgmni=2560
set msgsys:msginfo_msgtql=2560
set shmsys:shminfo_shmmax=1073741824
set shmsys:shminfo_shmmni=1000
set rlim_fd_cur=10000
Ipcs
Code:
bash-3.00# ipcs -a
IPC status from as of Wed Jun 13 12:31:01 ICT 2012
T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME
Message Queues:
q 62 0x1388 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 61 0x1387 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 60 0x1318 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 59 0x12a9 --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9071 10:25:38 10:25:38 8:36:22
q 58 0x100f --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9070 10:06:16 10:06:16 8:36:22
q 57 0xfa0 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 9071 9069 10:25:38 10:25:38 8:36:22
q 56 0xf30 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:20
q 55 0xc27 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:28:14
q 54 0xbb8 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 172 9066 10:47:08 10:47:08 8:28:14
T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
Shared Memory:
T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
Semaphores:
s 104 0x9c4 --ra-ra-ra- topx topx topx topx 3 12:31:00 8:36:20
s 103 0xa8c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 102 0xd48 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 101 0xce4 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 100 0x26de --ra-ra-ra- topx topx topx topx 8 10:19:34 8:28:14
s 99 0xc1c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 98 0xbb8 --ra-ra-ra- topx topx topx topx 1 8:43:50 8:28:14
s 97 0xaf0 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 96 0xa28 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 95 0x7ee --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 94 0x7e4 --ra-ra-ra- topx topx topx topx 1001 8:36:20 8:28:14
s 93 0x7da --ra-ra-ra- topx topx topx topx 220 8:36:20 8:28:14
s 92 0x7d5 --ra-ra-ra- topx topx topx topx 200 12:05:15 8:28:14
s 91 0x7d0 --ra-ra-ra- topx topx topx topx 200 8:56:42 8:28:14
s 90 0xc80 --ra-ra-ra- topx topx topx topx 2 12:31:01 8:27:52 –a
Prstat
Code:
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
9202 topx 1460M 893M sleep 59 0 0:16:37 0.2% integrity_check/1
12455 root 3880K 3600K cpu65 59 0 0:00:00 0.0% prstat/1
9080 topx 142M 130M sleep 59 0 0:00:52 0.0% intf_resp_low/1
9125 topx 102M 78M sleep 59 0 0:00:36 0.0% interface_vsc/1
9121 topx 88M 80M sleep 59 0 0:00:32 0.0% interface_tcu/1
9120 topx 89M 80M sleep 59 0 0:00:29 0.0% interface_rcm/1
9124 topx 87M 78M sleep 59 0 0:00:29 0.0% baplie_merge_v2/1
9122 topx 86M 78M sleep 59 0 0:00:28 0.0% interface_eih/1
9115 topx 88M 77M sleep 59 0 0:00:33 0.0% intf_batch_even/1
9114 topx 88M 77M sleep 59 0 0:00:39 0.0% intf_event/1
9117 topx 87M 78M sleep 59 0 0:00:32 0.0% interface_bxy/1
9118 topx 86M 78M sleep 59 0 0:00:29 0.0% interface_ppm/1
NPROC USERNAME SWAP RSS MEMORY TIME CPU
41 topx 334M 2237M 3.4% 0:30:17 0.3%
43 root 186M 195M 0.3% 0:14:45 0.0%
1 noaccess 152M 136M 0.2% 0:04:00 0.0%
1 smmsp 3688K 11M 0.0% 0:00:04 0.0%
1 lp 1208K 3880K 0.0% 0:00:00 0.0%
6 daemon 7264K 9944K 0.0% 0:00:26 0.0%
Total: 93 processes, 259 lwps, load averages: 0.40, 0.39, 0.39
Prstat –mL
Code:
bash-3.00# prstat -mL
PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWPID
9202 topx 0.9 0.0 0.0 0.0 0.0 0.0 99 0.0 2 0 5 0 integrity_ch/1
9080 topx 0.4 0.0 0.0 0.0 0.0 0.0 100 0.0 5 0 20 0 intf_resp_lo/1
9114 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 13 0 66 0 intf_event/1
17282 root 0.1 0.2 0.0 0.0 0.0 0.0 100 0.0 20 1 324 0 prstat/1
9117 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_bx/1
9118 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_pp/1
9115 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 15 0 80 0 intf_batch_e/1
9121 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_tc/1
9125 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9120 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_rc/1
9123 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9124 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 baplie_merge/1
9122 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_ei/1
9119 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_cp/1
9204 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 15 1 1K 0 sys_check/1
259 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 13 2 98 7 in.mpathd/1
1 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 3 0 99 3 init/1
1337 noaccess 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 100 0 100 0 java/14
140 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 19 0 114 0 nscd/851
Total: 90 processes, 256 lwps, load averages: 0.40, 0.40, 0.39
Vmstat
Code:
bash-3.00# vmstat 1 10
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr m0 m1 m2 m3 in sy cs us sy id
0 0 0 87720712 60562856 173 645 199 44 44 0 0 0 0 0 0 886 2819 525 0 1 99
1 0 0 87563976 59743040 73 327 0 15 15 0 0 0 0 0 0 747 2831 439 0 1 99
0 0 0 87563656 59742808 61 306 0 15 15 0 0 0 0 0 0 770 2684 427 0 1 99
1 0 0 87563656 59742824 0 0 0 0 0 0 0 0 0 0 0 886 1302 525 0 1 99
1 0 0 87563656 59742816 62 305 0 15 15 0 0 0 0 0 0 722 2652 420 3 1 96
1 0 0 87563656 59742840 554 2777 0 139 139 0 0 0 0 0 0 959 9736 749 1 1 97
0 0 0 87563456 59742672 1155 5735 0 292 292 0 0 0 0 0 0 1113 17489 1145 1 3 96
1 0 0 87563656 59742840 0 0 0 0 0 0 0 0 0 0 0 845 1613 654 0 1 99
0 0 0 87563656 59742856 62 305 0 15 15 0 0 0 0 0 0 900 2647 526 0 1 99
0 0 0 87563656 59742856 62 304 0 15 15 0 0 0 0 0 0 683 2661 396 0 1 99
Mpstat
Code:
CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl
0 0 0 130 261 1 121 0 13 1 0 0 0 1 0 99
1 0 0 35 133 2 143 0 9 6 0 64 0 0 0 100
2 0 0 5 20 2 17 0 3 0 0 29 1 0 0 99
3 0 0 0 3 0 2 0 0 0 0 0 0 0 0 100
4 0 0 3 14 0 15 0 2 2 0 13 0 0 0 100
73 0 0 474330 77 3 0 7 0 2 0 2596 67 33 0 0
73 0 0 487701 37 0 0 7 0 8 0 2670 66 34 0 0
73 0 0 476377 14 0 0 8 0 1 0 2610 66 34 0 0
78 0 0 473950 11 1 0 7 0 13 0 2593 67 33 0 0
78 0 0 480562 9 0 0 7 0 4 0 2630 66 34 0 0
79 0 0 320989 14 1 0 8 0 0 0 1766 77 23 0 0
79 0 0 479148 9 0 0 7 0 8 0 2622 66 34 0 0
79 0 0 479426 13 0 0 7 0 2 0 2622 67 33 0 0
79 0 0 488949 9 0 0 8 0 13 0 2678 66 34 0 0
64 0 0 482229 15 2 0 8 0 7 0 2638 65 35 0 0
77 0 0 475571 14 1 0 7 0 8 0 2602 67 33 0 0
69 0 0 467795 22 1 0 7 0 40 0 2563 66 34 0 0
69 0 0 318623 9 1 0 7 0 8 0 1751 77 23 0 0
66 0 0 465179 92 1 2 8 0 62 0 2545 66 34 0 0
When my application running, some of CPU have IDLE state = 0 and hold the CPU while another CPU have IDLE state 100. I think this is my bottleneck but I cannot find any solution for solve that.
Netstat
Code:
bash-3.00# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 244022 0 244022 0 0 0
nxge0 1500 TOPX-01-DUMMY1 TOPX-01-DUMMY1 3594863 0 5801650 0 0 0
nxge1 1500 TOPX-01-DUMMY2 TOPX-01-DUMMY2 160954 0 151230 0 0 0
iostat
Code:
bash-3.00# iostat -xn
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
0.1 0.1 1.5 30.8 0.0 0.0 1.8 9.0 0 0 md/d0
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.9 0 0 md/d1
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.8 0 0 md/d2
0.0 0.0 0.0 0.0 0.0 0.0 0.0 15.2 0 0 md/d3
0.0 0.0 0.0 0.0 0.0 0.0 0.0 10.9 0 0 md/d4
0.0 0.0 0.0 0.0 0.0 0.0 0.0 19.4 0 0 md/d5
0.0 0.0 2.2 1.5 0.0 0.0 0.8 7.4 0 0 md/d6
0.0 0.0 1.1 0.7 0.0 0.0 0.0 8.5 0 0 md/d7
0.0 0.0 1.1 0.8 0.0 0.0 0.0 8.2 0 0 md/d8
0.0 0.1 0.4 0.6 0.0 0.0 7.6 10.0 0 0 md/d9
0.0 0.1 0.2 0.6 0.0 0.0 0.0 9.1 0 0 md/d10
0.0 0.1 0.2 0.6 0.0 0.0 0.0 7.8 0 0 md/d11
0.0 0.0 0.0 0.0 0.0 0.0 0.1 10.4 0 0 md/d12
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.5 0 0 md/d13
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.4 0 0 md/d14
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.9 0 0 c0t0d0
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.8 0 0 c0t1d0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 c1t0d0
0.9 0.9 125.3 123.1 0.0 0.1 0.0 34.2 0 2 c4t600144F0CC00C29A00004D1E456F0003d0
0.3 0.7 20.7 53.9 0.0 0.0 0.2 8.2 0 0 c4t600144F0CC00C29A00004D1E43880001d0
0.1 0.2 50.7 111.5 0.0 0.0 0.0 59.1 0 1 c4t600144F0CC00C29A00004D1E453E0002d0
Please help me find the bottleneck of my T5440 server?Thanks so much for all your help.

Moderator Comment and Action:
@ O.P.,
You cross-posted this to at least two other forum web sites:
http://www.linuxquestions.org/questions/solaris-opensolaris-20/application-running-too-slow-on-sun-sparc-t5440-but-run-normal-on-sun-m3000-4175411155/
http://www.unix.com/solaris/189945-application-running-too-slow-sun-sparc-t5440-but-run-normal-sun-m3000.html
... and didn't think that was important enough to simply mention the fact.
Timestamps suggest that OTN was the last place you posted to.
Poor forum etiquette.
Why would anyone spend the time to try to give help that you have already received elsewhere? That's a waste of their time.
(Yes, you already received the suggestion to use Dtrace in one of those other sites.)
This thread is locked as irrelevant.

How can you load local server urls on application start?

Background:
I've been searching for close to two days for an answer to this question, it's full of gotchas and I can't quite get it figured out.
I have an application which contains several web services. These services load up listeners when the services are invoked which makes them available for input. The user has the option of disabling automatic load of these services and invoking them manually by typing in the local url and starting the app. The can allow the autoload which uses a the or allowing the auto load to start. Currently the local url is hardcoded in a property file and this is how the services knows the local endpoint to envoke when it autostarts.
<servlet id="AutoStart_01">
<servlet-name>autoStart</servlet-name>
<servlet-class>com.loadmy.StartupClass.Here</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
This works all fine and well until it's deployed onto a machine that runs a local weblogic cluster that has more than one jvm (and multiple ports) loading the application up.
Problem
The question is, how can you get the applicaton to recoginize the local url for the jvm that is running which can be on different ports? Here's what I've tried
A - Using Inet.Address - This doesn't let you know what port your application is on
B - Using the load servlet on start up ( Only the init() function is called and the request object hasn't been created and the request object is what contains ther protocol, server and port information)
C - Loading a jsp page (READ... purposefully loading a jsp page) on application start. The thought here is that this contains a request object, but unfortunately on this doesn't work in my servlet container (currently tomcat 6 but the application is for a web logic machine)
D - I thought about possibly using System.properties() but no luck there
I'm at witts end on this one and I know there is something that can recoginze the local servlet container and extract the url and port from it.
Any suggestions would be great.
Flabergasted [sic]

Hi,
I had a simmilar requirement once, i also had to display some meaningful message with the busy mode icon, but i guess that comes directly from the WD Framework and is not possible to be changed. Refer the following thread, i raised that time.
Web Dynpro ABAP
Dont have much idea if somethig exists in portal for this.
Regards,
Runal

Drawing and some layout help for a simple control: thin lines and application start

I am trying to create a new, simple control. The control should act as a grouping marker much like that found in the Mathematica notebook interface. It is designed to sit to the right of a node and draw a simple bracket. The look of the bracket changes depending on whether the node is logically marked open or closed.
After looking at some blogs and searching, I tried setting the snapToPixels to true in the container holding the marker control as well as the strokewidth but I am still finding that the bracket line is too thick. I am trying to draw a thin line. Also, I am unable to get the layout to work when the test application is first opened. One of the outer brackets is cut-off. I hardcoded some numbers into the skin just to get something to work.
Is there a better way to implement this control?
How can I get the fine line drawn as well as the layout correct at application start?
package org.notebook;
import javafx.beans.property.BooleanProperty;
import javafx.beans.property.IntegerProperty;
import javafx.beans.property.SimpleBooleanProperty;
import javafx.beans.property.SimpleIntegerProperty;
import javafx.scene.control.Control;
* Provide a simple and thin bracket that changes
* it appearance based on whether its closed or open.
public class GroupingMarker extends Control {
private final static String DEFAULT_STYLE_CLASS = "grouping-marker";
private BooleanProperty open;
private IntegerProperty depth;
public BooleanProperty openProperty() { return open; }
public IntegerProperty depthProperty() { return depth; }
public GroupingMarker(boolean open) {
this();
setOpen(open);
public GroupingMarker() {
open = new SimpleBooleanProperty(true);
depth = new SimpleIntegerProperty(0);
getStyleClass().add(DEFAULT_STYLE_CLASS);
// TODO: Change to use CSS directly
setSkin(new GroupingMarkerSkin(this));
public boolean isOpen() {
return open.get();
public void setOpen(boolean flag) {
open.set(flag);
public int getDepth() {
return depth.get();
public void setDepth(int depth) {
this.depth.set(depth);
package org.notebook;
import javafx.scene.Group;
import javafx.scene.paint.Color;
import javafx.scene.shape.FillRule;
import javafx.scene.shape.LineTo;
import javafx.scene.shape.MoveTo;
import javafx.scene.shape.Path;
import com.sun.javafx.scene.control.skin.SkinBase;
* The skin draws some simple lines on the right hand side of
* the control. The lines reflect whether the control is considered
* open or closed. Since there is no content, there is no
* content handling code needed.
public class GroupingMarkerSkin extends SkinBase<GroupingMarker, GroupingMarkerBehavior> {
GroupingMarker control;
Color lineColor;
double shelfLength;
double thickness;
private Group lines;
public GroupingMarkerSkin(GroupingMarker control) {
super(control, new GroupingMarkerBehavior(control));
this.control = control;
lineColor = Color.BLUE;
shelfLength = 5.0;
thickness = 1.0;
init();
* Attached listeners to the properties in the control.
protected void init() {
registerChangeListener(control.openProperty(), "OPEN");
registerChangeListener(control.depthProperty(), "DEPTH");
lines = new Group();
repaint();
@Override
protected void handleControlPropertyChanged(String arg0) {
super.handleControlPropertyChanged(arg0);
    @Override public final GroupingMarker getSkinnable() {
        return control;
    @Override public final void dispose() {
    super.dispose();
        control = null;
    @Override
    protected double computePrefHeight(double arg0) {
    System.out.println("ph: " + arg0);
    return super.computePrefHeight(arg0);
    @Override
    protected double computePrefWidth(double arg0) {
    System.out.println("pw: " + arg0);
    return super.computePrefWidth(40.0);
     * Call this if a property changes that affects the visible
     * control.
    public void repaint() {
    requestLayout();
    @Override
    protected void layoutChildren() {
    if(control.getScene() != null) {
    drawLines();
    getChildren().setAll(lines);
    super.layoutChildren();
    protected void drawLines() {
    lines.getChildren().clear();
    System.out.println("bounds local: " + control.getBoundsInLocal());
    System.out.println("bounds parent: " + control.getBoundsInParent());
    System.out.println("bounds layout: " + control.getLayoutBounds());
    System.out.println("pref wxh: " + control.getPrefWidth() + "x" + control.getPrefHeight());
    double width = Math.max(0, 20.0 - 2 * 2.0);
    double height = control.getPrefHeight() - 4.0;
    height = Math.max(0, control.getBoundsInLocal().getHeight()-4.0);
    System.out.println("w: " + width + ", h: " + height);
    double margin = 4.0;
    final Path VERTICAL = new Path();
    VERTICAL.setFillRule(FillRule.EVEN_ODD);
    VERTICAL.getElements().add(new MoveTo(margin, margin)); // start
    VERTICAL.getElements().add(new LineTo(margin + shelfLength, margin)); // top horz line
    VERTICAL.getElements().add(new LineTo(margin + shelfLength, height - margin)); // vert line
    if(control.isOpen()) {
    VERTICAL.getElements().add(new LineTo(margin, height - margin)); // bottom horz line
    } else {
    VERTICAL.getElements().add(new LineTo(margin, height-margin-4.0));
    //VERTICAL.getElements().add(new ClosePath());
    VERTICAL.setStrokeWidth(thickness);
    VERTICAL.setStroke(lineColor);
    lines.getChildren().addAll(VERTICAL);
    lines.setCache(true);
package org.notebook;
import com.sun.javafx.scene.control.behavior.BehaviorBase;
public class GroupingMarkerBehavior extends BehaviorBase<GroupingMarker> {
public GroupingMarkerBehavior(final GroupingMarker control) {
super(control);
package org.notebook;
import javafx.application.Application;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.control.TextArea;
import javafx.scene.layout.BorderPane;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class TestGroupingMarker extends Application {
public static void main(String args[]) {
launch(TestGroupingMarker.class, args);
@Override
public void start(Stage stage) throws Exception {
VBox vbox = new VBox();
BorderPane p = new BorderPane();
VBox first = new VBox();
first.getChildren().add(makeEntry("In[1]=", "my label", 200.0, true));
first.getChildren().add(makeEntry("Out[1]=", "the output!", 200.0, true));
p.setCenter(first);
p.setRight(new GroupingMarker(true));
vbox.getChildren().add(p);
vbox.getChildren().add(makeEntry("In[2]=", "my label 2", 100.0, false));
Scene scene = new Scene(vbox,500,700);
scene.getStylesheets().add(TestGroupingMarker.class.getResource("main.css").toExternalForm());
stage.setScene(scene);
stage.setTitle("GroupingMarker test");
stage.show();
protected Node makeEntry(String io, String text, double height, boolean open) {
BorderPane pane2 = new BorderPane();
pane2.setSnapToPixel(true);
Label label2 = new Label(io);
label2.getStyleClass().add("io-label");
pane2.setLeft(label2);
TextArea area2 = new TextArea(text);
area2.getStyleClass().add("io-content");
area2.setPrefHeight(height);
pane2.setCenter(area2);
GroupingMarker marker2 = new GroupingMarker();
marker2.setOpen(open);
pane2.setRight(marker2);
return pane2;

The test interfaces are already defined for you - the 3rd party session bean remote/local interfaces.
It is pretty trivial to create implementations of those interfaces to return the test data from your XML files.
There are a number of ways to handle the switching, if you have used the service locator pattern, then I would personally slot the logic in to the service locator, to either look up the 3rd party bean or return a POJO test implementation of the interface according to configuration.
Without the service locator, you are forced to do a little more work, you will have to implement your own test session beans to the same interfaces as the 3rd party session beans.
You can then either deploy them instead of the 3rd party beans or you can deploy both the test and the 3rd party beans under different JNDI names,and use ejb-ref tags and allow you to switch between test and real versions by changing the ejb-link value.
Hope this helps.
Bob B.

Application start verry slow

Similar Messages

Maybe you are looking for