Application startup at events

Hello,
I have heared that I can start an Application automatically at events like a incoming sms or an connection attemp with midp2. Is that possible? Does someone have a list of these events? Does somebody know an example?
regards
Franknstein

Type in "MIDP Push Registry" in the search box on the top of this page...
shmoove

Similar Messages

Error starting the Planning application, review the event log for details

We are using the Hyperion Demo and there was a problem suddenly cropped up.
While rebooting the system error is displayed saying - Atleast one of the driver is not installed.
VMware is used to access the Hyperion Demo and when Planning application is started it gives the following error:
Error starting the Planning application, review the event log for details
We were using this Demo from some weeks and was able to access the workspace and others but from few days this issue is faced.
Immediate response is highly appreciated as we are planning for a user demo in the weekend.
Thanks,
Ravi Kanth

Hi Nofog / Goodwin,
OLDAP is not running.
Following errors are displayed:
When VMWare is restarted: At least one service or driver failed during system startup. Use Event viewer to examine the Event log for details.
OpenLDAP: Windows could not start the hyperion S9 OpenLDAP on Local Computer. For more information review the system even log. If this is not the microsoft service contact the service vendor, and refer to service specific code 21.
Event log: The Hyperion S9 OpenLDAP service terminated with service - specific - erro 21 (0x15).
Please let me know your email ids so that to send the screen shots.
Thanks,
Ravi

After Effects can't continue: unexpected failure during application startup

Im running 10.10, Mac OSX, it was running fine before a minor update came out, and now I can not open AE CS6. I have uninstalled, reinstalled it, installed the trial of CC 2014. No messages beside "After Effects can’t continue: unexpected failure during application startup" come up.
System log:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
            Call location:
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 0   CarbonCore                          0x00007fff82bb637d ___Gestalt_SystemVersion_block_invoke + 113
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 1   libdispatch.dylib                   0x00007fff8bf70fa2 _dispatch_client_callout + 8
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 2   libdispatch.dylib                   0x00007fff8bf70f00 dispatch_once_f + 79
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 3   CarbonCore                          0x00007fff82b5e932 _Gestalt_SystemVersion + 987
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 4   CarbonCore                          0x00007fff82b5e51f Gestalt + 144
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 5   AdobeCrashDaemon                    0x0000000100002e69 -[MyDaemon GetOSVersionMajor] + 33
Jun 22 15:30:49 Users-iMac.local AdobeCrashDaemon[976]: 6   AdobeCrashDaemon                    0x0000000100002d4a -[MyDaemon isRunningOnLeopard] + 25

Well, looks like a bug in Yosemite. You might wanan read the pertinent announcements, anyway. At this point Adobe apps are not compatible with OSX 10.10.
Mylenium

Execute logic at application startup

Hi, I was previously using a servlet init method to write a JMS message to a queue. Since then, I've found that the FacesServlet is final and can't be extended. I know I have an application scope managed bean. Where is the recommended place to put application startup logic in a java server faces web application? I have an MDB reading the queue.
The logic should be executed at deploy/startup to the app server, before any user has accessed the web app.

What I am looking for is how to call a method in my application scope bean, after all the setters have been called.
I have the faces context initializing the beans variables (using the xml file as you indicate). I need a way after all this is done to call an init method or something in my bean to have it do some work before the faces application context makes it available for/to my pages.
I cannot use the constructor because the setters have not been called yet. I cannot do it in a setter because the order of the setter calls is unknown. I need all the setters to be called based on the values I specify in the faces-config.xml and when that completes be able to call a method in the bean to say go set yourself up and get ready for faces to begin calling into your methods.
The spring framework (just one I looked at) has the concept of an xml entry that allows you to specify a method name to call after all the setters have been called and perform any pre startup code you need. I would also like to be able to have a destroy type call in to method prior to the application going away.
I do not know how to do this using the servlet context or if there is some other way to perform this function.
Thanks,
Tony

Premiere Pro CC crashes before completing application startup on Dell Latitude E6530 (i7,16G, Win 7)

Premiere Pro CC crashes before completing application startup on Dell Latitude E6530 (i7-3720QM,16G RAM, Win 7 64 bit). Is this a know issue? Could this be a video display issue (I see both Intel HD Graphics 4000 and NVIDIA NVS 5200M device support in Device Manager)?
Help!
FYI - Photoshop CC works perfectly.

Dual video problems
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Application Startup

Does anybody have an example to startup a deployed application
automatically? For example when your backup is completed at night and want the
application to be ready for use. I know that it starts up automatically when
the first user
tries to use the applications but it can take up to 5 minutes because we have 6
partitions across 2 servers.
thanks
ka

From [email protected] Fri Jan 17 16:41 EST 1997
To: forte-users <[email protected]>
From: Kamran Amin <[email protected]>
Date: 17 Jan 97 8:21:55 EDT
Subject: Application Startup
Mime-Version: 1.0
Does anybody have an example to startup a deployed application
automatically? For example when your backup is completed at night and want the
application to be ready for use. I know that it starts up automatically when
the first user
tries to use the applications but it can take up to 5 minutes because we have 6
partitions across 2 servers.
thanks
kaThere are a couple of ways you can do this Kamran:
1) Run escript daily from a cron or schedular and source in a script file.
( using the -i option )
In your script file should look something like this:
CommentOn
WaitForEnvMgr
ExitIfNoEnvMgr
FindSubAgent xxx
Startup
Exit
The CommentOn command will log your script commands as they are executed
to stdout.
The WaitForEnvMgr will not start executing escript commands till the
environmanager is up and ExitIfNoEnvMgr will terminate your script
if there is an error communicating with the environment manager. This
will allow your calling shell to recognize an error.
2) The other way is to run ftexec daily from a cron or scheduler to start up
the server partitions:
ftexec -fi <image repository> -ftsrv 0
The <image repository> is the C-tree server *.idx and *.dat files
found under the $FORTE_ROOT/userapp tree. The "-ftsrv 0" will run
the server mutli-threaded only.
Hope This Helps
Paul Buchkowski
Merrill Lynch Canada
(416) 586 6610 Work
(416) 586 6615 Fax
[email protected]

Checking jre at application startup

Hi
Is it possible to check installed runtime version at java application startup and to warn if necessary jre needs to be installed?
Thanks

java.version property.
http://java.sun.com/docs/books/tutorial/essential/environment/sysprop.html

Consumer application using ETW events for TCPIP tarffic message

I am planning to build a consumer application using ETW events in real time mode. My application is already set with EVENT_TRACE_REAL_TIME_MODE for KERNEL_LOGGER_NAME. And successfully consume the Registry and file events.
Interested in consuming Network events for TCP/UDP and looking for sample code (C++) that gets relevant data from _EVENT_RECORD structure.
Any sample application and relevant documentation will be of great help.
Thanks.

I know they are in this kit
http://www.microsoft.com/en-us/download/details.aspx?id=3138
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com

WES Startup sequence events

Hi All,
I'm going to try my best to explain my situation. I have a Windows Embedded Standard 7 deployment released right now which boots up and runs fine. I just want to tweak the startup sequence of events, if possible.
We've written all the software that runs at startup from the services to the explorer shell replacement.
I have 2 videos for you to watch.
1) Explorer embedded start up for our device (Admin access only):
http://youtu.be/Ge4otXvOUvY
As you can see, I have to halt the auto login and enter the Admin user and password manually to login to the Admin account where explorer runs. What I want you to take notice here after I begin login, is the full screen black-to-blue background with
the typical Windows loading spinner running (This is Windows loading, not any of my software). This spinner and background stays on the screen until Explorer is loaded and is ready to be displayed to the user. There is no time where the user thinks
something isn't happening.
2) Normal embedded start up for our device:
http://youtu.be/4nL0uuXuqYo
As you can see, upon starting up, and our standard user automatic login, Winlogon displays a full screen black-to-blue background with the typical loading spinner running. After some time, this fades out and displays the users desktop background color
of red. At this moment in time our explorer shell replacement is still loading and is not yet visible to the user, so the user keeps seeing the red screen for some time while it loads, then without warning our explorer shell replacement is loaded and
is displayed on screen to notify the user the system is starting/doing something.
So my question is: Is there some events that our explorer shell replacement can hook onto and also trigger and event to Winlogon when the application knows its loaded and visible and the full screen loading spinner will fade out and you'll immediately see
our explorer shell replacement INSTEAD of now where it's a red background for some time?
I've found an article explaining a little about how you can change the sequence of applications that run found
here but I haven't given it a try yet. I wanted to get community feedback first.
Let me know if you need any more clarifications on this.
Thanks.

You can enable wallpaper with a custom shell. There was a post some time ago on the forum and it is in Chapter 7 of my book:
Copy the wallpaper image file to a convenient folder in the file system. Example c:\users\test\Documents\myimage.bmp.
Use Reg.exe to set up the registry:
REG ADD "HKCU\Control Panel\Desktop" /v Wallpaper /d C:\users\test\Documents\myimage.bmp
Finally call user32.dll:
rundll32 user32.dll,UpdatePerUserSystemParameters
You make the call to user32.dll on startup each and every time.
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Slow system and application startup times

Hi,
I've got a 17" Macook Pro (Early 2011) 2.2 GHz Intel Core i7 - ever since I bought it I feel like it runs a little slow.
I've been a long-time mac used but I feel a little disappointed with this machine.
e.g.: Startup time takes around 4 minutes.
Applications take around 10 seconds to start.
Chrome sometimes takes 5-10 seconds to start, about the same to quit.
My Xbench scores fluctuate wildly - best I've ever got is 220, worst is 18. 160 is about the average.
http://db.xbench.com/merge.xhtml?doc2=526647
http://db.xbench.com/merge.xhtml?doc2=537725
http://db.xbench.com/merge.xhtml?doc2=544252
I feel that tried everything including:
- Creating a new user
- Repairing disk permissions
- DIsk verify and repair
- Removing all startup items
- Installing extra ram (currently at 8GB)
It runs well most of the time but frustratingly slow sometimes and there doesn't seem to be any anomalous activity in activity monitor. I feel that it could be the hard disk, but don't know (I always have 250-350gb free).
Any help appreciated!

Thanks for the link. I've never seen that page before but I have done everything in that list.
It's not a spinning beachball issue - the system doesn't lock-up often it just takes a **** long time to do some things. I didn't really realise it as a problem until I started using other people's older/lower spec'ed macs and noticed that they run FASTER than mine.
Activity monitor pics - just after a restart with my usual apps running:
CPU https://skitch.com/e-hellodaniel/83pq5/activity-monitor
Memory https://skitch.com/e-hellodaniel/83pq7/activity-monitor
Disk https://skitch.com/e-hellodaniel/83pxg/activity-monitor
Even using Skitch to take those screenshots took ages.
It's almost like the disk or CPU is throttled back or bottlenecked, and always has been...

Swing application with network event handling

Hello, hope this is the right place for this post. I'm the design phase of a client application in java which talks to a remote server written in C via sockets. I have a design problem: I want my Swing app to have a GUI with buttons and all for normal activities, which activities report to the server, and I want the client to react to server calls anytime without interrupting normal GUi activities. Plus, all must work together, so I would prefer having a single thread for the app. (Think of an IRC client: the user uses the GUI for activities and sendim messages, and meanwhile the client listens for messages from the server and display them as they arrive). My question is: is this possible?
I have something like (in pseudo-java):
classMyApp extends JFrame {
public MyApp() {
    // Manages and create the GUI
    NetHandler h = new NetHandler(this);
    h.connect();
    while(true) {
      h.pollNetEvents();
class NetHandler {
private BufferedReader iStream;
private PrintWriter oStream;
private MyApp app;
public NetHandler(MyApp a) {
    app = a;
    Socket socket = createSocket(ip, port);
    iStream = new BufferedReader(new InputStreamReader(socket.getInputStream()));
    oStream = new PrintWriter(socket.getOutputStream());
    handshakeWithServer(); // Login & Password
public pollNetEvents() {
    try {
      String s;
      for (;;) {
        s = iStream.readLine();
        if (s.equals("") == false)
          break;
        else
          app.parseCommand(s);
    catch (IOException e) {
      app.sendMessage("Error in pollNetEvent: " + e);
}Roughly, something like this. With this solution the GUI works, but I cannot get the message the server sends.
I hope my message is clear enough. Can anybody help me with the design of my app? Thanks a lot.
Fabio.

You might consider posting this in the Swing forum. You might get a more complete response there, but here are my first thoughts.
-- I think you will end up wanting to use multiple threads, but only one thread will update the UI. For more about threading in Swing, see this tutorial: http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html
and maybe also here: http://www.sourcebeat.com/TitleAction.do?id=10 (look at the sample chapter on Threads)
-- For the polling code ...
Of course, if you use the classes provided for client/server communication described below, you don't need to write your own polling code. You may still wish worry about threading so that your UI remains responsive and does not encounter major issues: http://java.sun.com/developer/JDCTechTips/2005/tt0419.html#1
-- Updates to the UI from thread(s) that are not on the Event Dispatch Thread (the one that controls the UI) must be posted using the SwingUtilities methods, such as invokeLater
Message was edited by:
pthorson

Illustrator CC crashes on startup(windows event viewer message included)

Windows event viewer shows like this...
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-12-09T06:35:08.000000000Z
EventRecordID
71639
Channel
Application
Computer
HPNB-dhleeNB
Security
EventData
Illustrator.exe
17.0.0.260
52822426
ntdll.dll
6.1.7601.18247
521ea8e7
c0000374
000ce753
a690
01cef4a8afb2dd09
C:\Program Files (x86)\Adobe\Adobe Illustrator CC\Support Files\Contents\Windows\Illustrator.exe
C:\Windows\SysWOW64\ntdll.dll
0b8a3ab7-609c-11e3-8e0d-005056c00008
Please help.

Problem solved.   Refer to below.
3 posts
Nov 25, 2013
2.AlanDrVita,
Nov 26, 2013 9:16 AM   in reply to outdoorz
Report
I may have been able to resolve my issue. I held shift while opening Illustrator and opened it in a bare bones mode, then closed it and reopened it without getting the error message. Good luck to you.
Was this helpful? Yes   No

Struts servlet failed to load on application startup

I am having problems deploying a struts application on WebLogic 8.1 SP3. I get the following error on startup.
Call com.manu.cro.online.ui.KarmaActionServlet.addMapping(ActionMapping[path=/routingPost, type=com.manu.cro.online.ui.routing.RoutingPostAction])
Pop org.apache.struts.action.ActionMapping
register('-//Apache Software Foundation//DTD Struts Configuration 1.0//EN', 'jar:file:/C:/CVS_Source/NCRO/lib/GUI/struts.jar!/org/apache/struts/resources/struts-config_1_0.dtd'
register('-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN', 'jar:file:/C:/CVS_Source/NCRO/lib/GUI/struts.jar!/org/apache/struts/resources/web-app_2_2.dtd'
register('-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN', 'jar:file:/C:/CVS_Source/NCRO/lib/GUI/struts.jar!/org/apache/struts/resources/web-app_2_3.dtd'
resolveEntity('-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN', 'http://java.sun.com/j2ee/dtds/web-app_2_2.dtd')
Resolving to alternate DTD 'jar:file:/C:/CVS_Source/NCRO/lib/GUI/struts.jar!/org/apache/struts/resources/web-app_2_2.dtd'
Call com.manu.cro.online.ui.KarmaActionServlet.addServletMapping(action/java.lang.String,*.do/java.lang.String)
<Jul 18, 2007 9:13:39 AM EDT> <Error> <HTTP> <BEA-101216> <Servlet: "action" failed to preload on startup in Web application: "cro".
javax.servlet.ServletException
     at weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java:909)
     at weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.java:873)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:812)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:3281)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServletContext.java:3226)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:3207)
     at weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:694)
     at weblogic.servlet.internal.WebService.preloadResources(WebService.java:483)
     at weblogic.servlet.internal.ServletInitService.resume(ServletInitService.java:30)
     at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
     at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
     at weblogic.Server.main(Server.java:32)
Any reason why my action servlet is not loading? Any help will be appreciated.
My web.xml file looks like the following:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/j2ee/dtd/web-app_2_3.dtd">
<web-app>

<servlet>
<servlet-name>action</servlet-name>
<servlet-class>com.manu.cro.online.ui.KarmaActionServlet</servlet-class>
<init-param>
<param-name>application</param-name>
<param-value>com.manu.cro.online.ApplicationResources</param-value>
</init-param>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>detail</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>validate</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>

<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>

<welcome-file-list>
<welcome-file>jsp/online/Logon.jsp</welcome-file>
</welcome-file-list>

<taglib>
<taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-html.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/struts-template.tld</taglib-uri>
<taglib-location>/WEB-INF/struts-template.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/WEB-INF/croUtils.tld</taglib-uri>
<taglib-location>/WEB-INF/croUtils.tld</taglib-location>
</taglib>
</web-app>
Thanks.
gtata

This problem has been resolved. It was a classpath issue.

Application error in Event viewer Event ID :6398 The Execute method of job definition Microsoft.SharePoint.Search.Administration.SPSearchJobDefinition

Hi Friends,
On SharePoint 2010 application server I can see this error on event viewer for every one hour it is repeating. Please look at the screenshot below. I restarted the SharePoint search service 14 and SharePoint foundation search v4. but it is not solved
the issue.
Please look at the error below and help me to fix this issue .
Thanks
valmeekeshwar

Try this
https://sharemypoint.wordpress.com/2007/12/18/error-event-id-6398-and-6482-about-security-rights-of-osearch-service/
Stacy www.sharepointpapa.com

Application instances and events

If I'm streaming three related events such as football1, football2, football3 is it best practice to create a unique application instance for each football event?
Or should all 3 events just be grouped under a single application instance?
Example: C:\FMS\applications\football1\_definst_\football1, C:\FMS\applications\football2\_definst_\football2, etc...
I was asking because the FMS Admin Console breaks down the connection information by application instance and then I could just pull it up and see how many users connected and total connects to each event without making a bunch of admin api calls.
Does this make sense?

Should we require the users to install Java(FX) AND THEN WebFX AND THEN type the URL of our appp AND THEN it will deliver the app to them ? why ? WHY ?
Hi,
I'm Bruno, the creator of the WebFX project.
About the questions above, I would say first that this is just a concept, but instead of thinking about the "browser", it could actually be used by real projects today that want to provide a JavaFX experience, without having to push big JARs for clients that might be in a very distant location with really poor connectivity. Also, it would make it even easier for the developer to update the application "on the fly", and his users would have access to the new version instantaneously.
Consider wrapping the "WebFX" concept in your "base" desktop application, and instead of using WebView to load parts of your app using HTML+JS, why not using a FXView (based on the WebFX concept) to render remote code?
Again, it's a concept, but I'm sure it can be really useful :-)
Hope I could clear all the questions!
Thanks,
Bruno Borges
@brunoborges

Application startup at events

Similar Messages

Maybe you are looking for