Application Storage Issue

Hello,
A̶̲̥̅♏ having issue with my device being slow because the application storage memory ΐƨ almost full, i tried moving my apps to my media card but couldn't do that. ΐƨ there anyway this can be done? Please help .

No the apps cannot be moved onto a other storage device because it requires RAM memory which of course the sd card does not have.

Similar Messages

  • Netflix application storage error N8011

    Greetings,
    I have been searching for information on an issue my daughter is experiencing with Netflix on her MacBook Pro c2009. I have read many things in this issue, but have not found a true fix. Perhaps you can help.
    When she starts a movie, instead of the movie playing she receives the following error: Application Storage Error N8011. It tells her that Private Browsing is enabled and instructs her to turn it off or call Netflix. However, Private Browsing in not enabled. I have played around with Private Browsing and am fairly sure this is not the issue.
    The few things I have found in discussions on the net (suggestions that Netflix is not compatible with Safari 5, instructions to reinstall Silverlight, and making a new user account) have not provided a solution.
    The suggestion that Netflix is not compatible with Safari 5 might have been relevant some time ago, but it clearly is not "the" issue because I am able to use Netflix on the same computer using a different account.
    I have removed Silverlight and reinstalled it without any noticeable effect. Again, Netflix works with my account on the same computer. And Silverlight is a shared plugin, it does not need to be installed by each user.
    The "fix" that I found repeated a few times is to create a new user account (named "test"). This does work, but it is a work around. It is NOT a "fix".
    I believe the issue is related to an account permission or perhaps a Safari user configuration, but I have not been able to uncover anything in this light.
    The new account I created as a work around does not have Admin privileges, but Netflix does work with that account. This reduces the range of possible causes.
    If you have had a similar experience and have found the solution, please share it.
    Thanks!

    Thanks for your reply Klaus1.
    The link you sent does not work: Error 404 - Not Found
    I think the url you meant was:
    http://www.engadget.com/2010/06/07/how-to-re-enable-netflix-in-safari-5/
    I had seen this page and tried it, but reverting to version 4 did not help the affected user account. Besides, Netflix is working with version 5 on a different user account on the same computer. For these reasons I'm pretty sure the version 5 thing has been resolved.
    By the way, the info in the above link is really cool. I had no idea there was a way to revert Safari to prior versions. Apparently this is a feature for developers to test their web pages in different versions of several browsers - Cool!
    Back the to point, I'm curious how many people have experienced this N8011 issue with Netflix. By the dearth of info on the web addressing this problem, I'm guessing it is not very common. But it is real, no the less.
    Any help would be appreciated.

  • Application Storage - Free memory is zero

    Need URGENT  help for my mobile  issue ( Model 9220 Curve )  - Application Storage - Free memory is zero
    ( Tried reaching Blackberry Support in India - NO RESPONSE  ) 
    1. Getting Supplimentary Service failure : General Error - Comes on re-booting this device
    2. No free memory despite removing many application > 100 MB - despite status is same 
    3. Application Storage , there is in "Others "  - which is using 240 MB , besides " System " & " Applications " 
    4. Un-intalled ARM ( not deleled ) but could install again , in order to debug and isolate issue , as there is not enough free space.
    5 . Tried " Hard & Soft " Resets 
    Suggest !

    Make a full backup then do a security wipe on the device.
    http://www.blackberry.com/btsc/KB14058
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Iphone s4. it's a storage issue! i manage it and i could get 2.4 Gb free, but i still can't open apps or download a thing!

    iphone s4. it's a storage issue! i manage it and i could get 2.4 Gb free, but i still can't open apps or download a thing!

    Hello mona_i,
    It may help to force close all open applications, then restart your iPhone.
    iOS: Understanding multitasking
    http://support.apple.com/kb/HT4211
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If you're still experiencing issues, you may need to restore the device.
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Cheers,
    Allen

  • Other Application Storage

    Blackberry Torch 9810
    ATT Runnnig 7.1
    I'm having problems with my onboard device storage. It started out with 160MB free space, but now its down to 3 MB. I haven't installed any other apps( I deleted most ) yet the space will go down to 1MB then I will have to perform a battery pull. What's causing this?
    The culprit seems to be the "Other Storage" Category.  It starts as zero and then grows until it consumes all free space.  If I do a battery pull along with clearing Cache and unchecking all universal search categories, it will go down to zero but within 8 hours, it is back up to the 160 MB which is all of my free space.  I can't do battery pulls every 4 hours as I have a case that is difficult to come off. 
    What is in the "Other" category under Application Storage?  I have deleted most old emails and text messages.  I don't store any videos or pictures on the phone.  I actually wiped the memory card because I thought that could be an issue.  I only have roughly 4 apps and those are some of the very basic ones, no games. 
    Help, I just want to know what is in Other.  

    "Other" refers to as the cache and temporary files saved by the running applications in the background and applications that were used.
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • Regarding Sun Java System Application Server Issue with JVM

    Regarding Sun Java System Application Server Issue with JVM
    Hi
    I have installed SJSAS9.1 on solaris system. I m trying to deploy war file which i compiled in windows enviorment by jdk1.5.0_05. Every time i got the following error :
    type Exception report
    message
    descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: PWC6033: Unable to compile class for JSP
    PWC6199: Generated servlet error:
    [javac] javac: invalid target release: 1.5
    [javac] Usage: javac
    [javac] where possible options include:
    [javac] -g Generate all debugging info
    [javac] -g:none Generate no debugging info
    [javac] -g:{lines,vars,source} Generate only some debugging info
    [javac] -nowarn Generate no warnings
    [javac] -verbose Output messages about what the compiler is doing
    [javac] -deprecation Output source locations where deprecated APIs are used
    [javac] -classpath Specify where to find user class files
    [javac] -sourcepath Specify where to find input source files
    [javac] -bootclasspath Override location of bootstrap class files
    [javac] -extdirs Override location of installed extensions
    [javac] -d Specify where to place generated class files
    [javac] -encoding Specify character encoding used by source files
    [javac] -source Provide source compatibility with specified release
    [javac] -target Generate class files for specific VM version
    [javac] -help Print a synopsis of standard options
    note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
    I have cheked jvm version on both system the only difference is :
    Solaris points to jdk 1.5.0_09
    Windows point to jdk1.5.0_05
    Even i tried to run blank jsp also but again i got the same error.
    Can any help me to sort out the problem or give me any idea so i can do something by my own.
    Thanks in Advance
    Gagan

    Do you have ANT installed and available?
    Thanks,
    Kedar

  • Oracle 10g RAC using ASM - Storage Issue

    I’ve an issue related to Oracle 10g RAC.
    I’ve 2 node cluster each being Dell 2850 Server with RHEL 4.0
    I’ve EMC CX300 SAN storage with following partitions
    /orasoft     10 Gb          OCFS2 File system
    /oracrs          2 Gb          OCFS2 File system
    /orabackup      100 Gb          OCFS2 File system
    The datafiles are on ASM which is not directly visible in OS.
    I’ve common Oracle Home installed in /orasoft/db_1 which is shared by both nodes in cluster.
    I’ve faced an issue recently related to EMC storage.
    The /orasoft partition displays 1.4 Gb space available using df command.
    With both nodes sharing the common Oracle Home (/orasoft/db_1), when ever I try to touch a file I get an error as No Space left on device. I’m unable to start any service with the same reason.
    Is this setup correct ??
    Can anyone help me with this storage issue ??

    Need a clarification here...what do you mean by "Storage System"...do you mean a server/node or the SAN storage system. If you are referring to a server/node's local storage, then it would NOT be possible for use by RAC, since the disk space has to be shared among the nodes.
    Here is what you can do:
    - Create two partitions/devices (for example Disk_1 and Disk_2) in the SAN storage
    - Create a ASM disk group which would mirror Disk_1 to Disk_2.
    Again, please note that the partitions have to be visible and be accessible read/write from both the nodes/servers.
    HTH
    Thanks
    Chandra Pabba

  • Oracle 10g RAC+ASM - Storage Issue

    I’ve an issue related to Oracle 10g RAC.
    I’ve 2 node cluster each being Dell 2850 Server with RHEL 4.0
    I’ve EMC CX300 SAN storage with following partitions
    /orasoft     10 Gb          OCFS2 File system
    /oracrs          2 Gb          OCFS2 File system
    /orabackup      100 Gb          OCFS2 File system
    The datafiles are on ASM which is not directly visible in OS.
    I’ve common Oracle Home installed in /orasoft/db_1 which is shared by both nodes in cluster.
    I’ve faced an issue recently related to EMC storage.
    The /orasoft partition displays 1.4 Gb space available using df command.
    With both nodes sharing the common Oracle Home (/orasoft/db_1), when ever I try to touch a file I get an error as No Space left on device. I’m unable to start any service with the same reason.
    Is this setup correct ??
    Can anyone help me with this storage issue ??

    Hi,
    If you create a new diskgroup you may be to add the same diskgroup to parameter file or spfile and which will be needing down time.
    sugestion: Instead of creating new diskgroup you should to add disk to existing group.if you add asm disk to existing group your all problem will be solved and Oracle itself will be managing all.And than i am sure no need to add entry in the parameter or spfile like +db_create_file_dest=.....
    regards,
    Sher khan

  • ICloud storage issue; Restoring iPhone calendar from iMac after accidental iCloud deletion

    I set up iCloud to back up calendars and contacts and for find my phone.  Initially, it seemed to work alright.  Then I got messages on iPhone that there wasn't enough iCloud storage, even though the storage tab showed that I had used none of my iCloud storage at all.  So I turned off iCloud/contacts.   In iTunes I switched back from iCloud backup to backup from my iMac. 
    Later I got the same message about not enough room in iCloud even though only calendars involved.  So I truned off iCloud/calendar on my iPhone and was given the choice of keeping the calendars from the iCloud or deleting them (a foolish choice without a failsafe!!!).  I clumsily and mistakenly hit delete.  My calendars have most recently been synced with my new iMac and appear on the iMac and should also be in TM.  But right now there is no data in my iPhone calendar.
    When i go to calendars within the iiphone calendar there is a check next to Calender under "from MY Mac" and no reference to iCloud.  (There are no separate calendars for me, my wife, and joint.  Does this mean somehow these calendars have been merged because of iCloud?)
    I don't want to do another sync until I can make sure that the sync with the iMac will resotre the calendar(s) to the iPnone.  How do I do this?
    Do I have to do anything on the iMac before I try a sync?
    How do I avoid these problems in the future?  The only thing I really would like from iCloud is "find my phone".  How do I keep that capability without backing up or su=yncing otherwise anything through iCloud? 
    Is iCloud still Beta?

    Apple walked me through this and helped me revert to backing up on my iMac, using iCloud only for find my iPhone and iMac.  The process, however, is not straightforward and what the respective mac and iPhone support people (yes, they have that kind of specialization) led me through was clearer, if somewhat convoluted, than any instructions on Apple's support or community pages.
    Since my main concern was not losing my calendar and contacts information, the key was saving that, via export, to my desktop.  Sorry I didn't write down all the other steps - but I see that as Apple's job.  Back in the days of the IIC, Apple's manual was a model of clarity and completeness at the same time.
    Bottom line is while my immediate concerns were resolved, the underlying iCloud storage issue was not.  On my iPhone, I was being told that my attempts to backup to the iCloud failed because I didn't have enough storage, even though I determined almost none of my alloted space was used.  This issue is not helped by the multiplicity of settings relating to iCloud, or the interfaces (such as the iCloud on the iMac through Mavericks) which present a screen of icons without additional information.
    For my purposes, iCloud remains Beta.

  • How do I correct the silverlight application storage error to watch netflix movies?

    I get a Silverlight application storage error when attempting to watch an instant netflix movie. Following instructions of error message does not correct. Instant movies play properly with Explorer - but not Firefox.

    o resolve this error, you will need to update Silverlight application storage:
    1. From within the Silverlight player, right click.
    2. Click Silverlight.
    3. In the window that appears, click the Application Storage tab.
    4. In the next window, click the "'Enable application storage" checkbox.
    5. Click the "Delete all' button.
    6. Click Yes.
    7. Click OK.
    8. Click your browser's Refresh or Reload button to continue.

  • Application Deloyment issue...

    hi,
    i am getting this Deployment error...
    we got two servers one for developers at offshore and
    one at the onsite...
    the strange thing is that it is deploying n running fine on the offshore server.
    but not getting deployed on the onsite server!!!
    i have put the required references required and
    checked them too...!!!
    regards,
    -Amol Gupta
    Oct 18, 2007 11:11:04 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [004]Deployment aborted
    Settings
    SDM host : bp1xeuaa558
    SDM port : 50018
    URL to deploy : file:/C:/DOCUME1/amolg/LOCALS1/Temp/temp26291bp.comexmplsupplier_lds_create_adobe.ear
    Result
    => deployment aborted : file:/C:/DOCUME1/amolg/LOCALS1/Temp/temp26291bp.comexmplsupplier_lds_create_adobe.ear
    Aborted: development component 'exmpl/supplier_lds_create_adobe'/'bp.com'/'LOKAL'/'0.2007.10.18.11.10.17'/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application bp.com/exmplsupplier_lds_create_adobe.. Reason: Clusterwide exception: Failed to deploy application bp.com/exmplsupplier_lds_create_adobe. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application bp.com/exmpl~supplier_lds_create_adobe. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : The deployment of at least one item aborted

    >
    I have oracle PL/SQL application performance issue. To open a screen populated with 7,000 records takes 5 minutes.
    I have used SQL Analyze to get Index recomendation. Indexing did not help that much.Switch on a trace on a user who is just about to run that screen - let them rip.
    Stop your trace. Get your trace file. Run it through TKProf.
    Read the book by Cary Millsap that Sybrand recommends (or take a look
    at Chris Lawson) - i.e. read up on trace files and looking at them.
    Get the SQL that is run by the user and try running it from SQLPlus
    on the server (no network or app issues) - set timing on.
    That would be my approach.
    Do you think upgrading or replacing with newer machine can improve performance? Getting a newer machine often satisfies the geek's primeval urge to
    get his grubby little paws onto fancy shiny hardware - it may well
    work for a while, however you're not tackling the underlying cause
    of your problem, and it will (probably) reappear when the limits
    of the new RAM/CPU have been hit.
    If you what is suggested above, at least you'll be able to say
    to your management - "well, if we get a new server, performance
    will improve by this much, until we have (say) 14.000 records in
    the table, when performance will go back to the way it was before".
    Until you run a trace, you will have no idea if the problem will
    scale linearly with the no. of records or how it will
    behave into the future.
    You cannon manage what you cannot measure.
    Paul...
    Taf

  • Application redraw issue over Citrix and Terminal Server

    Hi All,
    We provide a client-server application which connects to a SQL Server database. The middle-tier is hosted on an application server (Windows Server 2008 R2) which in turn connects to the SQL Server database. The fat client can either be installed on user laptops/desktops
    or published using Citix/Terminal services.
    We have a long standing issue which frankly I just cannot fathom. A customer has published the client via Citrix to users and using roaming profiles. If an employee is using the application in London, the roaming profile is created on a server in London and
    connects to the middle-tier in London. If an employee is using the application in Glasgow, the roaming profile is created in Edinburgh and the user connects to the middle-tier in London. The customer is also using DFS
    The roaming profile consists of the 'My Documents', 'My Pictures', 'My Videos', 'My Music' and 'Windows' folder. Distributed File System (DFS) is used for roaming profile folder replication between offices. See http://technet.microsoft.com/en-gb/library/cc732863%28v=ws.10%29.aspx
    The Edinburgh users are experiencing application redraw issue where the interface loads in chunks. For example, when a user scrolls up and down or left and right, the data loads immediately (from SQL Server) but the interface (GUI) loads in blocks. You can
    actually see each segment of the GUI components loading. The issue also occurs if connecting via a Terminal Server where the application is also installed.
    For London users, it all works fine. If an Edinburgh user comes to London, they have no issues.
    The network connection is super fast between the various offices.
    The application is built using C++ and Delphi and uses the GDI API to draw the objects.
    Any guidance is appreciated.

    Hello partner,
    Thanks for contacting Microsoft. This is Sophia who is going to help with this issue. From your description, I learnt that users from Edinburgh have application redraw issue. However, London users worked fine. Please let me know if I misunderstand your purpose.
    Based on the information, it seems that the issue located in the middle-tier in London. Could you try building a middle-tier in Edinburgh and then test how the issue goes?
    Besides, based on my experience and research, by default the allocation of the bandwidth is 70 percent for graphics data and 30 percent for virtual channel data, meaning when bandwidth usage is under pressure, graphics data is guaranteed to get 70 percent
    of the available bandwidth.  And we can tweak the settings a bit for some scenarios. To change the settings, we can set registry values. Please reference the information below.
    ===========================================================================================================================================
    Note: For these settings to take effect, the computer must be restarted.
    Following is the list of registry values that affect the bandwidth allocation behavior. These are all DWORD values under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TermDD:
    ·         FlowControlDisable: When set to 1, this value disables the new flow control algorithm, making it essentially First-In-First-Out (FIFO) for all packet requests. This provides results similar to Windows Server
    2003. (The default for this value is 0).
    ·         FlowControlDisplayBandwidth / FlowControlChannelBandwidth: These two values together determine the bandwidth distribution between display and virtual channels. You can set these values in the range of 0–255.
    For example, setting FlowControlDisplayBandwidth = 100 and FlowControlChannelBandwidth = 100 creates an equal bandwidth distribution between video and VCs. The default is 70 for FlowControlDisplayBandwidth and 30 for FlowControlChannelBandwidth, thus making
    the default distribution equal to 70–30.
    ·         FlowControlChargePostCompression: If set to 1, this value bases the bandwidth allocation on post-compression bandwidth usage. The default for this value is 0, which means that the bandwidth distribution is applied
    on pre-compressed data.
    For more information about RDP Bandwidth, please reference the article below.
    ================================================
    Bandwidth Allocation for Terminal Server connections over RDP
    http://blogs.msdn.com/b/rds/archive/2007/04/09/bandwidth-allocation-for-terminal-server-connections-over-rdp.aspx
    Top 10 RDP Protocol Misconceptions – Part 1
    http://blogs.msdn.com/b/rds/archive/2009/03/03/top-10-rdp-protocol-misconceptions-part-1.aspx
    If you have any concerns about the action plan above, feel free to let me know.
    Best regards,
    Sophia Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Storage issues not correct on ipad

    I want to download a film off my cloud to my ipad but it iTunes says there are storage issues. I've deleted things and have well above the GB I need to download the entire film (as confirmed by 'usage') but it still says I haven't enough memory... It's driving me mad! Any tips?

    Sorry. Posted too soon.  Found the answer elsewhere on this site.

  • HT3209 I rented a video but never downloaded it because of storage issues on my iPad,will I still be charged

    I rented a video but never downloaded it because of storage issues on my iPad,will I still be charged?

    Download it to iTune on your laptop or computer.

  • Silverlight - Give generic Error, closes when you click on application storage - Windows 8

    Silverlight errors on websites and won't load bubble test.Also if you go into silverlight settings and click on application storage it doesn't open the box below just closes.
    I've tried deleting the file that saves silverlight cache, fix-it tool, registry cleaner and reinstall. Silverlight still won't load on windows 8 machine.

    Tricky one really.
    I work in businesses where the desktop set ups are well known.
    I'll try and offer some suggestions since you have zero replies.
    Kind of unsurprising though - there should be some sort of consumer orientated support somewhere rather than the only option being developer forums.
    If you try that bubble site I posted and it doesn't work then Silverlight is broken or you're using it in a browser it's just not going to work in.  ( That's just a random Silverlight site I found by the way ).
    Exactly what error do you see?
    The default browser settings for IE 11 stop my Silverlight business apps working, but there's a relatively friendly warning.
    You're using the desktop version of internet explorer?    If it doesn't have a house star and cog top right and looks all metro then it's not desktop.
    Other browsers are unreliable to fatal.
    Sounds like you did this:
    https://support.microsoft.com/kb/2608523/en-gb?wa=wsignin1.0
    You definitely have windows 8 pro?
    It is never going to work on win rt.  I never saw anyone trying to  install on win rt so I don't know what happens but neither the plug in or the Silverlight .net framework work on win rt.
    Other than that.
    Good luck.
    Hope that helps.
    Recent Technet articles:
    Property List Editing ;  
    Dynamic XAML

Maybe you are looking for