Application Support-Aperture-Plug ins folder not found

I'm trying to install flash album explorer plug in. I'm trying to find Application Support-Aperture-Plug ins to innstall it but I'm not able to find it. I was searching in every library under user, system, and I haven't been able to fint it....please help!!!!!!!! I have Aperture 1.5.2
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

DonCarlos, you have to create the folders if you do not have them. In Finder, follow the folders up to Aperture. This is where I had to create "Plug-Ins" and then clicked on it to open. Then created its subfolder "Export". I dumped the Flickr plugin here and restarted Aperture. Works perfectly.

Similar Messages

Waves plug in folder not found? Is there an audio plug in manager?

Hey folks, here we go with what will probably be a series of questions about Final Cut Pro- I just got and installed Final Cut Pro Studio today. I have version 5.1 on a Mac Pro listed below. When I boot up the program, it scans all my audio plug ins (I have many). I removed a couple that were demo's and am now held up on finding the Waves audio folder, although I think I know where it is (Macintosh HD->Applications->Waves->Waves Plug Ins) FCP doesn't allow me to select it, or anything in it.
I tried trashing the Waves preferences. No help there.
I also don't care about using this Waves thing, it's only a guitar amp simulator that I'll never likely need in FCP. So if no one knows about finding the Waves folder, is there a plug in manager like in Logic and other audio programs that would allow me to skip it anyway?
Thanks, Final Cut Pro forum people... I'm going to be learning this program soon, and will no doubt be on here from time to time with questions that I hope aren't too stupid. I can't find this in the four manuals at the moment, so if anyone has any ideas that would be great.

Was the audio line in good enough for most users, especially home users? Yes. Was the audio line in used by most professionals? No.
Keeping the analog signal as far away as possible from any potential source of interference is a good thing. Routing an analog cable over and around disks and power supplies and such can not have a good effect on the signal. Getting it digital as soon as possible can only help.
Conversely, I have looked at and tried quite a few of the USB & FW enabled audio devices out there in the market (including the iMic) and am not impressed at all.
Well you do get want you pay for
No where in my post did I say this was a good thing on Apple's part, I said it was a potential benifit (emphasis added). I too am sorry to see it go, I use it extensively on my personal machine for digitizing my record collection. At some point I will need to buy a new system and the cost of an external A/D converter will have to be added to the cost of the machine as will the cost for a DVD drive.
I do have to say however that this is the first time any post of mine has been called Balderdash, at least in such a lyrical way.
regards

I can't find in maverics the library/application support/aperture/plugins folder... anyone knows how to install pt lens plug in?

I can't find in maverics the library/application support/aperture/plugins folder... someone knows how to install pt lens plug in?

Your user library is hidden by default in Mavericks.
You can reveal it from the Finder's "Go" menu in the main menu bar:
Finder > Go
Then hold down to options-key ⌥, until "Library" appears in the drop-down menu. Select it and open the Library. Then look for the folder "Application Support/Aperture/Plug-Ins".
Alternately you could install the plug-in for all users in "/Library/Application Support/Aperture/Plug-Ins", in the "Library" folder directly on your sytem drive.
Regards
Léonie

TS3519 Library/Application Support/Aperture folder problem

I have Aperture 3 upgrade from Aperture 2. When I originally installed the upgrade for version 3, there was a small problem in that I had upgraded to version 2 from the version 2 trial; Aperture 3 did not accept the version 2 serial number for some internal reason. I contacted Apple and they supplied a valid serial number to allower version 3 to install as an upgrade. That's the back story.
Just recently, I tried to install a plug in (aperture to zenfolio) in the Application Support/Aperture/Plug-Ins/Export folder, but my machine did not have that folder. I was told I could create that set of nested folders and then install the plug in. Somehow though, I changed a permission setting on that set of folders and Aperture is asking for the current serial number and a valid serial number for the upgrade. I've tried both serial numbers for the version 2 software, but version 3 does not accept either. I am at wits end and I don't want to reinstall Aperture since I'm concerned that a lot of the presets might disappear.
Any thoughts?

and you know this because spotlight could not find it?
Well, spotlight does not search the system disk.
The relevant file will be found in /Library/Application Support/ProApps/Final Cut Studio System ID

How to Delete Unwanted Aperture Plug-ins

I have installed a trial version of a plug-in that I don't want to use. How do I uninstall a plug-in?
Thanks

just delete them from:
\Library\Application Support\Aperture\Plug-ins\
or
~\Library\Application Support\Aperture\Plug-ins\
with aperture not running and then restart ... poof ... gone ...

Why is there no plug-ins folder in my Library/Application Support/Adobe/ folder?

As with many other users, the "Open in Camera Raw" option is grayed out in Bridge CS6.
I downloaded the suggested plug-in and tried to follow the path: Library/Application Support/Adobe/Plug-Ins/CS6/File Formats folder
But there's no Plug-Ins folder under Library/Application Support/Adobe.
I'm going to the Library folder that comes up when I click Go while holding down Option.
Am I doing something wrong?

Okay, I went to Home and then ~/Library and clicked Shift+Command+G -- and there's till no Plug-Ins folder under Library/Application Support/Adobe.

Cannot find the plug-ins folder for photoshop elements 6

Hi,
I was trying to update the plug-in for camera raw for PE6, downloaded the update however in the instructions it tells me to go to the root folder in Library/Application Support/Adobe/Plug-Ins/CS3/File Formats and replace the camera raw plug in.
there is no plug-ins folder in the library/application support/adobe folder. Is there somewhere else I should be looking ?
I am running a Mac with yosemite.
thanks in advance,

You are probably in the wrong library. You have three libraries on your mac: your username>library, system>library (never mess with that one), and the library at the top level of your hard drive, which is the one you want. It's not exactly hidden, but it's very hard to get to. The easiest way is to go to the Finder preferences>sidebar>show these items in the sidebar, and turn on Hard disks. Then when you open a new finder window, you will see your hard drive in the list on the left side of the window. Click it and the library will be at the top level of results on the right side of the window.

Unable to locate Plug-Ins folder - Mac

I've searched the path listed on Adobe's site to install the latest Camera Raw update (Library/Application Support/Adobe/Plug-Ins/CS3/File Formats), and noticed I only have up to the Adobe level of folder listed.
So on my computer I can only get to Library/Application Support/Adobe, then there is no folder for Plug-Ins.
So, where am I supposed to load the software update? Should I create the missing folders?
I have CS3 running on Leopard if that helps any.

>Should I create the missing folders?
b No!
You are looking at the wrong Library. You need the root-level library,
b NOT
the one in your username or Home folder.
http://files.myopera.com/cperaloca/albums/92592/Path_to_ACR_in_CS3.jpg

In CS3 i cant find my plug ins folder

I downloaded the camera raw 4.1 update and per the instructions your supposed to drop the plug in at Library/Application Support/Adobe/Plug-Ins/CS3/File Formats .
I followed that path but there is no folder titled "plug-ins" inside of the Adobe folder, im on a mac, i followed this path both through the Finder and the hard drive icon, any suggestions?

c
<a href="http://www.pixentral.com/show.php?picture=1BaKblOrrhAVoErNw51y8r6rKDpsT" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1BaKblOrrhAVoErNw51y8r6rKDpsT_thumb.jpg" border="0" />
<br />c Scroll horizontally after clicking on Thumbnail. Wide image.

Nik Software Plug-Ins are not compatible with Aperture 3

After installing my upgrade to Aperture 3, I get a message when attempting to use one of my Nik Software editing plug-ins. The message says that the plug-ins are not 64-bit (they are 34-bit) and in order to run them, Aperture must close and reopen in 34-bit mode. What does this mean and how do I fix it?

Keli
In order to open Aperture in 32-bit mode by default you can right-click on the application icon, select "Get Info" and check the box marked "Open In 32-bit Mode" (or you can continue to run it by default in 64-bit mode and just get forced to re-open the app anytime you need to use plug-ins that can only run in 32-bit mode).
hope this helps!
Raf

This is an message when I open up CS4 in Illustrator. "Some plugins in additional plugins folder are conflicting with application or user plugins. It will skip loading plugins from additional plug-ins folder? What does this mean and how can I fix it.

This is an message when I open up CS4 in Illustrator. "Some plugins in additional plugins folder are conflicting with application or user plugins. It will skip loading plugins from additional plug-ins folder? What does this mean and how can I fix it?

Thanks Larry. I thought so. I will do this weekend. Again, I appreciate your help.
Trying to get updated software – I am not a fan of the cloud stuff. Nothing I can do about it.
Thanks again Larry!

I can not use CanoScan N670U with my Macbook pro. I download canoscan toolbox 4.1 from Cannon website. It keep saying "the scanner plug-in was not found". Please help

I can not use CanaScan N670U with my Macbook Pro. I download Canoscan toolbox 4.1 from Cannon websit. It still keep saying "The scanner plug-in was not found". Please help

There is a solution (I'm running Snow Leopard on a Core2Duo iMac, but this problem arose when I was running Leopard on a G4 PowerBook too).
Problem:
You download the OS X driver for the scanner from Canon's site. I already had the CanoScan Toolbox (4.1) stored on an external drive.
You unzip the driver and run the VISE installer. After a search it finds your copy of Photoshop (and maybe even the CanoScan Toolbox), and you click to install on that/those location(s).
You get a couple of error messages, which you click through.
You restart your computer and try to run the scanner but you get an error that the driver is wrong or missing and the process will abort.
Solution:
BEFORE you restart, and with the installer package still open -
1. Copy the Into_CFMSupport_Login & Into_CMPrefs folders to
Applications : Canon Utilities
Applications : Canoscan Toolbox
and remove the prefix Into_ from each folder
2. Check whether the installer placed N067U_Library.shlb into the top level (not User level)
Library : CFMSupport
and if it didn't, move it there yourself
THEN restart, and try again. It worked for me (via Photoshop), but whether it will work for everyone, I don't know.

Extension Manager removing the whole Plug-ins folder along with the panel

When I click "Remove" from the Extension Manager interface, the following has occurred--
In CS6 - When I used the Extension Manager to "remove" by clicking the "remove" button, it removes not just the panel I installed but has removed the folders "Plug-ins>Panels>my panel". The whole hierarchy!
In CS5 - it has left the Plug-ins folder but removed "Panels>my panel"
In CS4 - the Extension Manager is working correctly for installing and removing without removing any shell folders.
Question #1 - What do I do about my missing plug-ins for these applications? This is disastrous!
Question #2 - Is there a way to fix the CS5 and CS6 Extension Manager to not delete the shell folders, when you are just trying to remove a custom panel????
My system:
Windows Vista Ultimate
Service Pack 2
Processor Intel Core 2 Quad CPU Q9650 @3.00GHz
Memory (RAM) 8.00GB
System-64-bit
Hard Drives C: 1Terabyte - 301GB available
Z: 1 Terabyte - 309GB available

Also here is more info that might be germane--
I am using Extend Script Toolkit CS6 3.8.0.12 ExtendSript 2.12 ScriptUI 6.1.8 to edit and generate 1 .mxi file for use in CS5 & CS6 and another .mxi file for use in CS4.
I open the Adobe Extension Manager for CS5 to create the .mxp files for CS5 & CS6
I double click on the .mxp file and it automatically opens Adobe Extension Manager CS6 and installs the panel into Photoshop CS6
I manually open Adobe Extension Manager CS5 it is sluggish to open and shows a progress bar. Then I do a File>Open to install the panel into Photoshop CS5.
In the testing of various iterations of mypanel, I have removed the previous version of mypanel, so there is nothing showing as enabled or installed in the EM. So, are you kind of saying that if I hadn't emptied out the panel but had left my own panels in there as just disabled, rather than "removed" that the rest of the whole Plug-ins folder would still be there. Leaving something in there would have been like saving an empty seat for a friend at the theater?
The Versions of Adobe Extension Manager that I am using are:
CS6 version 6.0.2.40
CS5 version 5.0.334
CS4 Version 2.1.112 (which appears to be working as it should!)

Cannot find "Plug-ins" folder for Photoshop CS6 on my Mac.

I cannot find ”Plug-ins" folder for Photoshop CS6 on my Mac. Path suppose to be Macintosh HD > Applications  > Adobe Photoshop CS6 > Plug-Ins but that folder is missing. Any suggestion on how to find it?

Thank you Hans,
If I understand it correctly, way to install extensions/plugins on Mac is
following
"Quit Photoshop, then copy the desired plug-ins (or extensions) to the
following locations:
Mac OS:
   - Applications/Adobe Photoshop CC/Plug-ins folder
   - Applications/Adobe Photoshop CS6/Plug-ins folder"
In my case it would be the last path, as I have CS6.
However, my problem is that Plug-ins folder is missing
Regards
Goran
2014-06-01 21:42 GMT+02:00 hans-g. <[email protected]>:
    Cannot find ”Plug-ins" folder for Photoshop CS6 on my Mac. created
by hans-g. <https://forums.adobe.com/people/hans-g.> in *Photoshop
General Discussion* - View the full discussion
<https://forums.adobe.com/message/6425830#6425830>

Where is the FC Studio plug ins folder?

Hi,
Basic question here. I am trying to install a few new noise reduction filters in Final Cut since Compressor is quickly dying before my eyes!
Where in the world is the Final Cut Studio plug ins folder? It used to be Library - App Support - Final Cut Pro - Plug Ins, but in the new Final Cut Studio world, it is in a different spot.
Does anyone know where it is? Thanks!

Quick tip:
Library/somewhere/somewhere else -is always the main Library directory at the top level of your hard drive.
˜/Library or, your name/Library is the directory specific to your user space.
* This is information is for your disambiguation. We hope that you feel disambiguated.

Application Support-Aperture-Plug ins folder not found

Similar Messages

Maybe you are looking for