Application Sync Issue and Load Issue
My newly purchased 16GB phone will no longer launch the free apps I have downloaded. I followed some directions that said to delete them from the phone and then sync from iTunes (after logging off and then back on iTunes). I get the error message:
Some of the applications in your iTunes library, including "...", were not installed on the iphone "..." because you are not authorized for them on this computer.
I have no idea what has happened and I am not finding the solution .
Hallo over there
After using creative cloud cleaner ....
every things is ok...8-)
Sendt fra mobilen....
Med venlig hilsen/Kind regards
Fotograf Hans Søndergaard
Allégade 23 1.baghus
DK 2000 Frederiksberg
M: +45 4044 8190
[email protected]
www.soendergaard.com
Den 07/11/2013 kl. 17.32 skrev Simon_P1 <[email protected]>:
Re: CC application file sync issue and CC App broken menu..
created by Simon_P1 in Adobe Creative Cloud - View the full discussion
Since the CC app messed up again and yet another reinstall, it is working (sort of, after several sync failures of lrcat) properly, including the menu, all be it very slowly considering the fast upload I have.
As is the setting sync finally.
Thanks for keeping me informed, oh wait, you didn't!
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5823499#5823499
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5823499#5823499
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5823499#5823499. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
Similar Messages
-
Microsoft Outlook 2011 for Mac sync Contacts and Calendar issues
OK, so I have a Macbook Pro with OS X Mountian Lion. I have Microsoft Outlook 2011 for Mac installed. Asked @BlackberryHelp on Twitter how to sync my Blackberry Torch with Outlook as it seems to default to using the builtin Apple Contacts and Calendar instead of Outlook. So they sent me the link to KB19148: "How to synchronize organizer data in Microsoft Office for Mac between the BlackBerry smartphone and a Mac computer using BlackBerry Desktop Software". So I turned on the Sync Services in Outlook and it gave me the dialog box confirming that everything was synced. And it appeared to copy and sync whatever Contacts in the Apple Contacts and calendar entries in the Apple Calendar into Outlook and vice versa. Cool since that's what I wanted.
Then I tried using the Blackberry Desktop Manager to sync everything to my Blackberry Torch 9810. Everything looked like it synced until I opened my Blackberry and all my Contacts were gone. Same with my Calendar entries, except that the Calender entries were hit and miss to whatever copied over (some Calendar entries were missing and others were duplicates). Checked the Apple Contacts and all of them were gone. But when I opened Outlook, everything was there and all OK.
So am I missing something? Turning on Sync Services in Outlook should sync all my Contacts and Calendar with my Blackberry when I use Blackberry Desktop Manager, correct? So why is it still syncing with the Apple Contacts and Calendar (and why did it delete all my Apple Contacts and mess up my Apple Calendar)?
Good thing I backed everything up first so restored everything. But I have all my updated Contacts and Calendar in Outlook and I still need to sync all of that. I don't want to manually do it. So how do I fix this??After a bit of googling I think you mean the notation "domain\username", i.e., a backslash separator but no leading backslash.
I am not familiar with that notation but apparently it is valid in some contexts. I googled "os x "domain\username"" to confirm this notation. Here's one of the hits that shows the notation:
OS X Lion: Guidelines for connecting to a DFS namespace via SMB
I think "DFS" is a distributed file system. That's as much as I know about this. -
SD Card Issues and Sound Issues
Hello all,
I bought my Xperia Z2 probably 2-3 months ago and I have to say I do love this phone.
However I have come across a few issues that seems to be, not so common as I cannot find any solutions online (Which is why I'm here).
I am having 2 issues:
1st Issue:
SD Card Issue, this is a funny one as I have not been able to identify what actually causes this issue. Now this all started (or when I started to realise the issue) when I changed some settings in the Camera App. I saw that it was saving photos to "Internal Storage" and since I specifically bought a new SD card for the Xperia Z2, I wanted to store photos on the SD card instead.
So I changed it to SD Card Storage and all is well (At least, that is what I thought).
After taking some photos one day, I got home and wanted to preview them, in the photos app and Album (Sony's Photo Previewer) it shows that the photo is corrupted or missing (Depending on which app I'm using). This really annoyed me as the photos I took seems to be all lost and corrupted. So I tried to use a file explorer (Including File Commander) to find the actual file and open it, but it seems to have the same problem. I get this grey background with a picture of a mountain with like a thunderbolt sign (Broken sign).
Following this, I have also tried to copy some video files onto the SD card and it has been giving me troubles too. I tried to copy videos onto the SD card in 2 ways, first way is to take the SD card out, connect it to a SD card reader and plug that into the computer. After it finished copying onto the SD card, the files would just disappear (I use computers a lot and this was very surprising and new to me... It's like the SD card deleted the files right after it was copied, or maybe even 'hid' the files).
So since that method didn't work I thought I would try putting the SD card back into the phone and connect the phone to the computer then use Sony's MediaGO (Computer App) to transfer the videos and it sort of worked this time. I copied 14 videos over and only the first 2 videos are working, the others are all "Media is missing" or of some sort. I checked the video's format and they are all either .avi or .mp4 which I don't think is a problem as the first 2 videos are in .avi so surely other .avi videos would work too? Guess not...
So it seems like I am having troubles with Video and Photos on the SD card as music is working 100% fine. Used Media GO to copy the music on and it's all working wonderfully.
Some of you might suggest formatting the SD Card, I will say I have... I have tried the above methods before formatting AND after formatting (Formatting using Xperia Z2, or shall I say "erase").
The SD card I have is Sandisk's 64GB Ultra (I bought this to anticipate 4K or at least 1080p video recordings).
If the issue here is SD Card compatibility and I was silly enough to not have seen that prior, then I would gladly admit it's my fault and be happy that the solution would simply mean to buy another SD card.
But that said, I highly doubt that would be the issue due to the fact that the SD card is made for performance (Not the best performance as the Extreme and Extreme Pro range are a lot better) and the card is new.
2nd Issue:
Now this issue is not as bad as the first issue, it's something to do with the sound. I understand the phone has 3 sound controls, one for the Ringtone for when you get a notification or/and phone call, one for Media and one for Alarm.
What I do is I have the Ringtone volume sitting at around 50% and Media will be dependent as I change it when I open an app but the issue I've been having is this:
If I open an app (Mainly games that has sound/music) and I change the Media volume to say 70% or even 20%, whenever I get a notification whilst in-app the notification volume seems to be at 100% no matter what I do with the media volume. This is weird as my default Ringtone/Notification volume is sitting very low at around 50% or even if I change it to 20%.
What am I missing here? Any thoughts?
With the above 2 issues, last resort would be to factory reset my phone but will be willing to do it if there's a high chance of the issue getting fixed.
Your thoughts will be greatly received as right now I'm just lost and not sure what to do with the issues. I'm slowly getting the feeling that I should just give up on the phone and use it for phone calls, music and forget about the whole photo/video taking which is very sad as I love the phone's photo/video taking features.
Solved!
Go to Solution.Hello Rickard,
Thank you for the link, I have started the test and 10 minutes into the test the speed for writing dropped. Anyways I only managed to get through in writing 8GB of data then I gave up. I then started to verify that 8GB of data that was written on the SD Card.
I have to say, it does seem like that SD Card is defective
Thank you for providing the link, what I will do now is get another SD Card and see if the problem is still there.
If the problem goes away I would consider my 1st issue being solved
However I am still not sure about my 2nd issue as this is not related to the SD card. Even without the SD card in the phone I seem to be experiencing this problem.
It's frustrating sometimes as if I'm trying to keep the volume down and play a game I can't because any notifications that comes through will be at 100% volume.
Perhaps there's a setting I'm missing?
Your help would be greatly appreciated. -
BlackBerry Curve 8520 Battery life issue and Loading icon
Hello, I have an issue with my BlackBerry Curve 8520, the problem is that it has extremely low battery life and half the time it has the loading circle thing in the middle, I first thought it was my batteries fault but after buying a new battery the loading circle thing still comes up but not as much but the battery life is still extremely low (locked or on standby whatever its called it lasts around 2-3 hours, Ive turned off my bluetooth and the problem still remains please help!
Anthony (or anyone else monitoring this thread):
So, what was the outcome of the troubleshooting session with "windycity"?
I don't have a problem with a mysterious icon; however, the anemic battery issue is exactly as windycity described: new charged-up Samsung Haven phone is on; no calls in or out; no text messages either; however, in slightly less than 24 hours, the Haven goes from having a fully-charged battery to one that's dead, or just about.
Like windycity, I bought this simple phone for my father, who just wants a phone he can make voice calls with, nothing more.
However, the sad peformance of this phone+battery has not helped me in my campaign to at least get him to dip his toes into the digital stream -- in fact, he wants me to take it back and cancel the plan!
I'd really rather not do that, but we'll need some kind of resolution to this problem first. -
Issue with recent iPhoto/Photo app syncing-updating and deleting issues.
I had sync my mom's iPad to her iPhoto library only to find that I cannot delete photos from her iPad without first sync-ing up to her Mac and deleting photos from iPhoto, first, then re-sync her iPad to delete the photos from her iPad. Her Mac is running 10.5.8 with iPhoto 9 (8.1.2)
Why can't I delete her photos directly from my iPad?
I can delete images/photos if I just send them over email and save them to her iPad photo app without using iPhoto, but it's a long inconvenient process.
Second, I made a slew of edits to her photos after initially sync-ing them to her iPad. The iPhoto makes the updates, but when I re-sync her iPad, the iPad is not transfering or updating its photo app database to reflect the changes I made to her images in iPhoto.
What Gives?
I am going to have her download an image editing app for her iPad eventually, but for right now we are using iPhoto.
Why isn't the iPad accepting the updated data from the edits I make in iPhoto?
Message was edited by: MichelPMI'm trying to find out the same thing and have been for quite some time. Just updated to Maverick and now I can't even get in to iPhoto! Aggrivated!!
-
G3 CRT - start up and loading issues
I've recently been given a 2nd hand Grpahite G3 by a friend - the machine switches on and makes the chiming sound
Not so good is the fact that it comes to the grey apple screen and then we are left with a loading icon which continually rotates for ages and ages! Then nothing else.
I have reset the PRAM and that was successful with the repeated chimes - result! but haven't a clue where to try next???
Any ideas????
Many, many thanks in advance.
Amie.If the previous owner left the iMac off the wall socket for any extended time, the internal PRAM battery may be dead and the computer has "forgotten" where to look for its start-up volume. Try booting while holding the key combo command + option + p + r. That forces the computer to look at its original factory setting for teh location of teh startup disk.
Understand that a lot of G3 imacs are starting to suffer heat-related failures of the power/analog/video--or PAV--board. If that;s hapend to yours, it;s probably not worth trying to fix.
Did you get system disks with the computer? There are diagnostics there that may help. -
Unable to load acrobat says I must shutdown Incredimail and loading issue
cannot load Adobe says I must stop Incredimail (EMAIL Server) and Internet Explorer
Is there a problem with shutting down these things?
-
Iphone 6 and syncing music and movies issues
I have tried multiple time to syncing my music and movies to my new iPhone 6 with iOS 8.02. I have an iMac with iOS 10.9.5 and iTunes 11.4. I am unable to sync my music or movies. All either do not sync to the iPhone or if they do I playlists are dropped and when I select a song another is played. I have tried reseting the phone and different sync settings. Nothing I have done or forum suggestions I have followed have worked.
I have been using Macs and iPhones for years. This is the first time I have had this problem. The problem extends to my iPad 4 after updating to iOS 8.
Seems to me that there is something seriously wrong with this software either iOS 8.02 alone or in combination with iTunes 11.4.
I am beyond frustrated. This software update is a disaster.I had this problem - was driving me crazy. I tried many things including restores etc. The following solved it:
Go into iTunes
Open up your new iPhone on the tab in the top right corner
In the Summary box - simply unclick "Sync only checked songs and videos"
Click apply
Then I was fixed!
Good luck -
when i try to listen/preview a song, I hear a couple of seconds, and then get a box w/the message: stalled- rebuffering stream; after a few seconds, the song picks up again, but then get interrupted by this same message, and this situation repeats and repeats, so I cannot listen to any song continuously, any ideas? could it be my dial up? I was able to listen and down load songs before today, but not anymore.
Your dial-up connection may be too slow.
Go to Preferences>Store and check 'Load complete preview before playing'.
that should do the trick.
Hope this helps.
M -
Sync iphone and g5, issues
please, if anyone knows:
itunes are not seeing the changes i made to the contact groups in the address book. please see two screenshots.
address book groups:
http://www.yzdesign.com/Picture%201.png
itunes info/contacts for iphone:
http://www.yzdesign.com/Picture%203.png
any idea how to make it work?
thanks,
yHey Yelena,
Try resetting the sync history in iSync.
Just launch iSync>Prefrences>Reset Sync History.
http://docs.info.apple.com/article.html?path=iSync/2.0/en/isc39.html
Jason -
For those with pixel rendering issues and slowness issues
For anyone who doesnt know these little details when designing in Catalyst, I thought I would share and hopefully ease some peoples frustrations. Lets kick off with pixel issues.
You have either vector, raster, or components that are either: not aligning with everything else around it, even though it has the same X/Y value, the rounded corners of a rectangle vector object are distorted, or anything else you have experienced with pixel distortion or pixels just not lining up properly. Here is the issue. When you drag and drop an object from the library, wireframe components, or draw a new shape, it can have a decimal level pixel value. It does not say this in the property inspector though. So you may have a rectangle at a listed X/Y of 10,15 but it could actually be 10.3, 14.9. To fix this you have to type in a new value of at least 1 number higher or lower. Deleting the value and typing the same number in doesnt do anything. Neither does moving it with the arrow keys in hopes of it moving it to a whole pixel value. The arrow keys move by 1 pixel (or 10 if holding down shift). This should take care of most of your problems.
Now you may still have problems with the corners of rounded rectangles if you converted it to an Optimized Vector Graphics. For you Flash Pro users, from what I can tell, using "Optimize Vector Graphics" is basically the same as (in Flash) converting a vector shape into a MovieClip and in the property inspector, checking the "Cache as Bitmap" box. That option has Flash create a bitmap version of the vector shape so that it will not be re-drawn every frame, which is what the Flash player does with vector objects. So because it is converting your vector into raster, it kinda has issues with rounded corners when you have a stroke on the shape and pretty much only if you have a stroke. If you take the stroke off, and use Optimize Vector Graphics, you shouldn't have that problem anymore. But what if you needed that stroke? Simple, duplicate that shape, change its fill color to what you want the "stroke" color to be, increase its size by 2 pixels on the width and height for every number of thickness that you wanted with the stroke, and then set the X/Y of the "stroke" rectangle to a pixels less for whatever the "thickness" of your stroke is.
Example:
Rectangle - width:20, height:10, desired stroke thickness:2, X:10, Y:10
Rectangle Stroke - width: 24, height:14, X:8, Y:8
Rectangle - width:100, height:30, desired stroke thickness:1, X:15, Y:27
Rectangle Stroke - width:102, height:32, X:14, Y:26
It wont look perfect but its pretty close if you do this and then draw a rectangle beside it with a real stroke. And if you still want to use Optimize Vector Graphics on it, just group the two rectangles together and then use Optimize on the group and no more distorted corners. This also applies to vector shapes in Flash Pro.
Lastly to talk about the slowness of Catalyst. You may or may not have read the posts from Adobe employees, but I can tell you that having fewer states helps with the responsiveness of it, but so does using the Optimize Vector Graphics as much as possible. I am working in a large scale project, and just from me converting all my vector background shapes, which was around 13 used across 6 main states, it helped significantly with Catalyst being more responsive for me.
Hoped this long post helped some people with any similar issues you might be having.I noticed with my Charge phone that when I get a call the FIRST ring is highly muted (quite soft) and then all rings after that are full volume.
I wish that even the first ring was load (full volume) but I accept the fact that that is how GB 2.3.6 works. Anyone know how to change this?
Ya can't win 'em all.
JerryF -
Twitter issue and hotspot issue
Just got my N9 and have 2 issues that i've noticed so far. 1st while in the twitter application it will not let me see trending topic. Second issue is that the hopspot doesnt 'work. if i try to launch it it says wireless network not allowed. Any ideas?
for twitter, do the following:
make sure that you have enabled developer mode:
open xterm (do not devel-su into the terminal)
gconftool --recursive-unset /system/http_proxy
gconftool --recursive-unset /system/proxy
gconftool --recursive-unset /system/osso
this wipes all the bluetooth connections and internet connection data as well, but that is easy to redo.
for the wifi hotspot do the following:
open xterm (devel-su into the terminal)
echo 1 > /sys/devices/platform/wl1271/allow_adhoc
note: you will have to redo the echo command each time your device is rebooted as it reverts to default upon the boot. -
MGCP PRI - UpDown logs difference between Telco Issue and Network issue
Hi,
Setup is remote site MGCP Gateway and CUCM is on HQ. I'm suspecting the below logs and what caused its flap but not 100% sure, is this correct?
Logs caused by connection to Telco
021987: Jan 14 18:15:45.708: %CONTROLLER-5-UPDOWN: Controller E1 0/3/0, changed state to down (AIS detected)
021988: Jan 14 18:15:45.712: %CONTROLLER-5-UPDOWN: Controller E1 0/3/1, changed state to down (AIS detected)
021989: Jan 14 18:15:46.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/0, changed state to down (AIS detected)
021990: Jan 14 18:15:46.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/1, changed state to down (AIS detected)
021991: Jan 14 18:15:46.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/2, changed state to down (AIS detected)
021992: Jan 14 18:15:46.696: %CONTROLLER-5-UPDOWN: Controller E1 0/2/3, changed state to down (AIS detected)
021993: Jan 14 18:15:46.912: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/2/0
021994: Jan 14 18:15:47.708: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to down
021995: Jan 14 18:15:47.712: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to down
021996: Jan 14 18:15:48.692: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to down
021997: Jan 14 18:15:48.696: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to down
021998: Jan 14 18:15:48.696: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to down
021999: Jan 14 18:15:49.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/0, changed state to up
022000: Jan 14 18:15:49.700: %CONTROLLER-5-UPDOWN: Controller E1 0/2/1, changed state to up
022001: Jan 14 18:15:49.708: %CONTROLLER-5-UPDOWN: Controller E1 0/2/3, changed state to up
022002: Jan 14 18:15:51.700: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to up
022003: Jan 14 18:15:51.708: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to up
022004: Jan 14 18:15:52.164: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/2/0
022005: Jan 14 18:15:53.692: %CONTROLLER-5-UPDOWN: Controller E1 0/2/2, changed state to up
022006: Jan 14 18:15:53.708: %CONTROLLER-5-UPDOWN: Controller E1 0/3/0, changed state to up
022007: Jan 14 18:15:53.716: %CONTROLLER-5-UPDOWN: Controller E1 0/3/1, changed state to up
022008: Jan 14 18:15:55.692: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to up
022009: Jan 14 18:15:55.708: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to up
022010: Jan 14 18:15:55.716: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to up
Logs caused by network connectivity issue between CUCM and MGCP Gateway
021869: Jan 7 10:05:00.763: %LINK-5-CHANGED: Interface Serial0/2/2:15, changed state to administratively down
021870: Jan 7 10:05:01.371: %SYS-5-CONFIG_I: Configured from console by console
021871: Jan 7 10:05:02.575: %SYS-5-CONFIG_I: Configured from console by console
021872: Jan 7 10:05:02.667: %LINK-5-CHANGED: Interface Serial0/2/3:15, changed state to administratively down
021873: Jan 7 10:05:03.275: %SYS-5-CONFIG_I: Configured from console by console
021874: Jan 7 10:05:04.479: %SYS-5-CONFIG_I: Configured from console by console
021875: Jan 7 10:05:04.571: %LINK-5-CHANGED: Interface Serial0/3/0:15, changed state to administratively down
021876: Jan 7 10:05:05.179: %SYS-5-CONFIG_I: Configured from console by console
021877: Jan 7 10:05:06.475: %LINK-5-CHANGED: Interface Serial0/3/1:15, changed state to administratively down
021878: Jan 7 10:05:08.391: %SYS-5-CONFIG_I: Configured from console by console
021879: Jan 7 10:05:09.603: %SYS-5-CONFIG_I: Configured from console by console
021880: Jan 7 10:05:10.815: %SYS-5-CONFIG_I: Configured from console by console
021881: Jan 7 10:05:11.591: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to up
021882: Jan 7 10:05:12.027: %SYS-5-CONFIG_I: Configured from console by console
021883: Jan 7 10:05:12.803: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to up
021884: Jan 7 10:05:13.239: %SYS-5-CONFIG_I: Configured from console by console
021885: Jan 7 10:05:14.015: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to up
021886: Jan 7 10:05:14.451: %SYS-5-CONFIG_I: Configured from console by console
021887: Jan 7 10:05:15.227: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to up
021888: Jan 7 10:05:16.439: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to up
021889: Jan 7 10:05:39.379: %SYS-5-CONFIG_I: Configured from console by console
021890: Jan 7 10:05:40.079: %SYS-5-CONFIG_I: Configured from console by console
021891: Jan 7 10:05:41.783: %SYS-5-CONFIG_I: Configured from console by console
021892: Jan 7 10:05:42.483: %SYS-5-CONFIG_I: Configured from console by console
021893: Jan 7 10:05:43.779: %LINK-5-CHANGED: Interface Serial0/2/1:15, changed state to administratively down
021894: Jan 7 10:05:44.187: %SYS-5-CONFIG_I: Configured from console by console
021895: Jan 7 10:05:44.887: %SYS-5-CONFIG_I: Configured from console by console
021896: Jan 7 10:05:46.183: %LINK-5-CHANGED: Interface Serial0/2/2:15, changed state to administratively down
021897: Jan 7 10:05:46.591: %SYS-5-CONFIG_I: Configured from console by console
021898: Jan 7 10:05:47.291: %SYS-5-CONFIG_I: Configured from console by console
021899: Jan 7 10:05:48.587: %LINK-5-CHANGED: Interface Serial0/2/3:15, changed state to administratively down
021900: Jan 7 10:05:48.995: %SYS-5-CONFIG_I: Configured from console by console
021901: Jan 7 10:05:49.695: %SYS-5-CONFIG_I: Configured from console by console
021902: Jan 7 10:05:50.991: %LINK-5-CHANGED: Interface Serial0/3/0:15, changed state to administratively down
021903: Jan 7 10:05:51.399: %SYS-5-CONFIG_I: Configured from console by console
021904: Jan 7 10:05:52.099: %SYS-5-CONFIG_I: Configured from console by console
021905: Jan 7 10:05:53.395: %LINK-5-CHANGED: Interface Serial0/3/1:15, changed state to administratively down
021906: Jan 7 10:05:55.811: %SYS-5-CONFIG_I: Configured from console by console
021907: Jan 7 10:05:57.023: %SYS-5-CONFIG_I: Configured from console by console
021908: Jan 7 10:05:58.235: %SYS-5-CONFIG_I: Configured from console by console
021909: Jan 7 10:05:59.011: %LINK-3-UPDOWN: Interface Serial0/2/1:15, changed state to up
021910: Jan 7 10:05:59.447: %SYS-5-CONFIG_I: Configured from console by console
021911: Jan 7 10:06:00.223: %LINK-3-UPDOWN: Interface Serial0/2/2:15, changed state to up
021912: Jan 7 10:06:00.659: %SYS-5-CONFIG_I: Configured from console by console
021913: Jan 7 10:06:01.435: %LINK-3-UPDOWN: Interface Serial0/2/3:15, changed state to up
021914: Jan 7 10:06:01.871: %SYS-5-CONFIG_I: Configured from console by console
021915: Jan 7 10:06:02.647: %LINK-3-UPDOWN: Interface Serial0/3/0:15, changed state to up
021916: Jan 7 10:06:03.859: %LINK-3-UPDOWN: Interface Serial0/3/1:15, changed state to up
thanks in advance!!Here it is.. what is it you're looking for? i'm suspecting the above difference between %LINK-5-CHANGED (network issue) vs %LINK-3-UPDOWN (telco issue)
E1 0/2/0 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (71 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
0 Line Code Violations, 330 Path Code Violations,
0 Slip Secs, 6 Fr Loss Secs, 0 Line Err Secs, 1 Degraded Mins,
7 Errored Secs, 5 Bursty Err Secs, 2 Severely Err Secs, 2147417995 Unavail Secs
E1 0/2/1 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (72 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
0 Line Code Violations, 314 Path Code Violations,
0 Slip Secs, 5 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
8 Errored Secs, 6 Bursty Err Secs, 2 Severely Err Secs, 2147418015 Unavail Secs
E1 0/2/2 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (75 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
0 Line Code Violations, 344 Path Code Violations,
0 Slip Secs, 12 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
16 Errored Secs, 4 Bursty Err Secs, 5 Severely Err Secs, 2147418015 Unavail Secs
E1 0/2/3 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (103 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
0 Line Code Violations, 448 Path Code Violations,
0 Slip Secs, 5 Fr Loss Secs, 0 Line Err Secs, 1 Degraded Mins,
7 Errored Secs, 5 Bursty Err Secs, 2 Severely Err Secs, 2147418002 Unavail Secs
E1 0/3/0 is up.
Applique type is Channelized E1 - balanced
Description:
No alarms detected.
alarm-trigger is not set
Version info FPGA Rev: 08121917, FPGA Type: PRK4
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
International Bit: 1, National Bits: 11111
Data in current interval (104 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
0 Line Code Violations, 299 Path Code Violations,
0 Slip Secs, 8 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
11 Errored Secs, 5 Bursty Err Secs, 0 Severely Err Secs, 2147418017 Unavail Secs -
Gaming issues and heat issues, running windows 8.1 pro via bootcamp
I have a few problems, and I don't know what else to do, then to write for help here..
I really hope someone out there can help me, because I have had this problem since I bought my laptop mid 2012, and I got smarter since then, so now I know that I actually shouldn't have these problems, it's not because my very expensive laptop is bad, or that it is a laptop or because it's a mac, regardless of what people say, I'm positively certain that it's a problem which shouldn't be there.
I have pretty great specs, (trust me i checked them out, not the best in the world, but pretty good) yet I can't enjoy 1 single mmorpg game like, Tera, or the new Archeage (currently in open beta), or any other game, (swordsman online)... Even though people say Tera has bad coding, I have tried adjusting things for weeks if not months, NOTHING helps, i get a frame rate that is from 0-25 very unstable, usually around 7-12, and sure if I go the lowest settings in the games I can get very unstable framerates but i guess they can get up to around 35-72 but drops to like 7 or 3 sometimes as well, so even on the LOWEST settings in the games I can't enjoy the games fully... It lags and such because of the low fps ofc...
Other than that it also have a heat issue, mostly when running windows 8.1 in bootcamp.
It get's quite hot, just by opening a browser window, and yes i have tried reseting smc, and p-rams, many times.. nothing seems to help.
And even if it helped the heat problem, the gaming problem is still there.
Now to my specs: (I have the macbook pro retina, mid 2012, 15 inch)
- Prosseser: 2.6GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 6MB shared L3 cache. "Core i7" processor (3720QM)
- Memory: 16GB 1600MHz DDR3L onboard memory
- Storage: 256GB ssd flash storage. (Seperated into os x = 130GB, windows 8.1 pro = 120GB) Running games and such from my 1TB external harddisk.
- Graphics and video support:
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors.
And here's a link to see what is inside it for yourself: http://http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core- i7-2.6-15-mid-2012-retina-display-specs.html
When that is said, apple's warranty has run out, and I didn't buy apple care, but I still have warranty from the store (humac) I bought it in, because in my country the law is warranty 2 years, no matter what, but if i can avoid it, I REALLY would like to avoid switching it out with a new one, since there could be problems all over again, and I would lose what I have on it right now, plus it's a hassle to get a new one, they will always try and fix it for a long long time before they give a new one, and probably can't find the problem...
But if that's the only thing i can do about it, I will ofc, but just don't advise me to do that, unless there's no other solution to the problems.
Please help me.
ps: sorry if I posted it the wrong place, I wasn't allowed to post it the right place by apple...If the underlying hardware was exposed correctly by the CSM-BIOS when Windows was installed, your Device Manager should look like this.
If the Windows installer did not see any devices as your screen indicates, Windows will use generic software-based drivers which will be very slow and painful.
Rudegar ... I think the Windows installer did not see any hardware, otherwise there should be HW with yellow triangles with exclamation marks. -
Hard disk partition issue and space issue
Hello i was trying to do a partition on my hard disk on my macbook pro retina. Wen i go to disk utility and try it says i need to repair the disk. I used command r in reboot and repaired but still having issues. When i look at space i get two different space available on macintosh HD. Here are the pictures you will see the space available is different depending what i choose. I am confused. Any help is appreciated. Here are the pics.
When you boot using Cmd-R, you're booting from a hidden Recovery Partition. That partition is using part of the space that is the size difference you're seeing between the Media line (upper picture) and the boot partition line. You can turn on the Debug Menu which shows the extra partitions using these directions.
I'm not sure but I suspect the issue may be that your boot partition is encrypted.
Maybe you are looking for
-
Nokia N97 synchronization canceled and lost messag...
Hi all, I've a problem with my Nokia N97. I was using Ovi Suite, and trying to synchronize everything from my phone to the computer. The process started fine, but it was taking too long, and after more than one hour of processing, I was forced to lea
-
what should i do if i want to see due date invoice in APP? Regards Sap Guru
-
Trick to mate pic in pic with main video?
hello there, I frequently shoot video with two cameras, a stationary for whole view and a hand held for close up work. I put the close up shots as picture in picture in the main clip. Is there a trick to mate the shots? I've been setting the clip tim
-
Iweb would not update the title
My iweb would not update the title of one of my website pages. All other updates went through but this one. I even deleted the page and did it again and it refuses to appear right after published. It also shows an error 404 in the page when published
-
Dear Experts, i'm following the document http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06db8e2-5036-2c10-1a97-dee1364fcec8?quicklink=index&overridelayout=true for implementin charm workflow there when i change from method call