Application tool bar at selection screen

HI.
For application tool bar iam using following code.
SELECTION-SCREEN: FUNCTION KEY 1,
FUNCTION KEY 2.
sscrfields-functxt_01 = 'Report'.
sscrfields-functxt_02 = 'Clear'.
But iam getting 3 application tool bar 1.Execute 2.Report 3.Clear.
I want only Report and Clear buttons,how can I remove default execute button from application tool bar.
Pls advice me .
Reward all helpful answers,
Regards.
Anil.

hi,
AT SELECTION_SCREEN OUTPUT.
SET PF-STATUS 'SPACE' EXCLUDING 'EXECUTE'.
We can do the above way but handle the other buttons as per your requirement
Thanks & Regards,
Chandralekha.

Similar Messages

Icon with push button on application tool bar

hi
how we place icon along with pushbutton on application tool bar on selecteion screen.
thanks in adv

Hi,
you can check the code below for test,
TYPE-POOLS icon.
TABLES sscrfields.
DATA functxt TYPE smp_dyntxt.
Parameters: test(1) TYPE C.
SELECTION-SCREEN: FUNCTION KEY 1.
INITIALIZATION.
functxt-icon_id   = ICON_GRAPHICS.
functxt-quickinfo = 'graphics'.
functxt-icon_text = 'Graphics'.
sscrfields-functxt_01 = functxt.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
    WHEN 'FC01'.
Message 'Button 1 pressed' TYPE 'I'.
    WHEN OTHERS.
ENDCASE.
START-OF-SELECTION.

Add bottons on the application tool bar of the standard selection screen

Hi All,
I am having the standard selection screen in module pool programing. I wnat to add the bottons on the application tool bar of the standard selection screen.and hide the existing bottons (like std. execute and i bottons.)instead of these i want to give my won bottons like create and display.
pls help on this.

Hi Sridhar,
Try the Code below. It places two buttons on the selection-screen along with the execute button.
TABLES sscrfields.
PARAMETERS: p_carrid TYPE s_carr_id,
            p_cityfr TYPE s_from_cit.
SELECTION-SCREEN: FUNCTION KEY 1,
                  FUNCTION KEY 2.
INITIALIZATION.
sscrfields-functxt_01 = 'LH'.
sscrfields-functxt_02 = 'UA'.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
      WHEN'FC01'.
      p_carrid = 'LH'.
      p_cityfr = 'Frankfurt'.
    WHEN 'FC02'.
      p_carrid = 'UA'.
      p_cityfr = 'Chicago'.
ENDCASE.
START-OF-SELECTION.
WRITE / 'START-OF-SELECTION'.
Just go to the table sscrfields to knoe the fields in it. I think this clears the issue.
Regards,
Swapna.

How to add button on application tool bar of standardt ransaction

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
these are the avilable user Exits for the Tcode..C203
XCZD0004 Extend authority check for the material-recipe allocati
CMDI001 Determine explosion control for BOM
CPAU0001 Enhancement for Authorization Check in Task Lists
CPDO0001 Test units of measure for reference operation set
CPRE0001 Enhancement for Reorgnization Checks in Task Lists
Run this Program.. enter the Tcode. u'ii get teh BADI's exist for the Tcode
REPORT Z_FIND_BADI .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Please give me reward points...

Push buttons on application tool bar , should be changed based on radio but

Hi fndz,
i have 2 radio buttons on selection screen.
depend on the radio button i select , the push buttons on
application tool bar of basic list should be changed.
can u plz help me.
Thanks & Regards
kumar

Hii..
Parameters : r1 radiobutton group GRP1 ,
 r2 radiobutton group GRP1 .
START-OF-SELECTION.
 CASE 'X'.
 WHEN R1.
 SET PF-STATUS 'S1'.
 WHEN R2.
 SET PF-STATUS 'S2'.
 ENDCASE.
Note: if you want to call the Same GUI Status (app toolbar), you can use the syntax
SET PF-STATUS 'S1' EXCLUDING <ITAB>
hope this solves ur issue.

Copy as icon on Application Tool bar

Hi Friends,
My requirement is like this. There is an button as COPY on application tool bar. when u select a row and click tht button the same record is copied and inserted into a new row at the end of all the records.
Can any one explain me hw to solve this or if any one has does this can u post the code.
Thanks and I appreciate u r help.
with regards,
chaithanya.

Hi Chaithanya,
Please check my sample code from other thread.
WHEN 'COPY'.
      READ TABLE TC-COLS INTO COL WITH KEY SCREEN-INPUT = '1'.
      IF SY-SUBRC = 0.
        CALL SCREEN 200 STARTING AT 03 01 ENDING AT 32 4.
        IF COPY_OK = 'ENTER'.
          LOOP AT I_BINLOC INTO ZMBINLOC WHERE ZMARK = 'X'.
            ZMBINLOC-WERKS = COPY_WERKS.
            ZMBINLOC-LGORT = COPY_LGORT.
            ZMBINLOC-ZMARK = ' '.
            INSERT ZMBINLOC INTO I_BINLOC INDEX SY-TABIX.
          ENDLOOP.
          SORT I_BINLOC ASCENDING BY WERKS LGORT ZBINLOC.
          DELETE ADJACENT DUPLICATES FROM I_BINLOC.
          DESCRIBE TABLE I_BINLOC LINES TC-LINES.
        ENDIF.
      ENDIF.
Regards,
Ferry Lianto

Push button in the application tool bar in the standard LDB PNP

Hi ABAPERS,
I have a requirement that in the selction screen to use the standard LDB PNP beyond that I need to pass one push button in the selection screen 1000 ( in the application tool bar beside execute button) actually i passes the push button in the gui status but its not refelcting in the output and in the initilization event also i passed even then its noty working,
initialization.
move 'Cluster ID'(010) to sscrfields-functxt_01.
Thanks and Regards,
Deepthi.

Pavan,
write code like this
TABLES: USR02, "Logon data
SSCRFIELDS. "FIELDS ON SELECTION SCREENS
STANDARD SELECTION SCREEN FOR SCROLLING LEFT AND RIGHT
SELECTION-SCREEN: FUNCTION KEY 1.
SELECTION-SCREEN begin of BLOCK b1.
PARAMETERs p1 type i.
SELECTION-SCREEN end of BLOCK b1.
INITIALIZATION.
SCREEN ICON LEFT AND RIGHT
SSCRFIELDS-FUNCTXT_01 = 'Button'.
start-OF-SELECTION.
Thanks
Bala Duvvuri

How to create print button in the Application tool bar in the Std.SAPscreen

Hi,
    I want to create a print button in Production order display:header screen in CO03 transaction.In that after Viewer button(i.e. in application tool bar) ,I have to create this print button. Can anyone suggest me How do i need to proceed further?

hi,
Use this code..
REPORT Z_TEST999                               .
DATA itab TYPE TABLE OF sy-ucomm.
PARAMETERS test(10) TYPE c.
AT SELECTION-SCREEN OUTPUT.
APPEND: 'E' TO itab.
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
       EXPORTING
            p_status = sy-pfkey
       TABLES
            p_exclude = itab.
Regards,
Sailaja.

Regarding list display + button on application tool bar

Hi guru's
I have a requirement like i need to select one particular record in the list display and prees on the button which is placed on the application tool bar.Then i should get one more screen where i can enter some details.
As per my knowledge it is possible only in grid display.
Kindly let me know if it is possible.
It would be great help if sample coding is provided.

Hi Ajay,
 You can do this in alv list display also.
Copy the standard gui status in ur program using tcode SE51->user interface>copy->target prog name.activate it
and add a button there.Use FM 'REUSE_ALV_EVENTS_GET' to get user-command event.
sample code :
form Z8_EVENTCAT using p_i_eventcat TYPE SLIS_T_EVENT.
DATA : L_EVENT TYPE SLIS_ALV_EVENT.
FOR GETTING ALL 17 EVENTS
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
 I_LIST_TYPE = 0
IMPORTING
 ET_EVENTS = P_I_EVENTCAT
EXCEPTIONS
 LIST_TYPE_WRONG = 1
 OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR L_EVENT.
READ TABLE P_I_EVENTCAT WITH KEY NAME = SLIS_EV_PF_STATUS_SET INTO L_EVENT.
IF SY-SUBRC = 0.
MOVE 'Z8_PF_STATUS' TO L_EVENT-FORM.
APPEND L_EVENT TO P_I_EVENTCAT.
ENDIF.
CLEAR L_EVENT.
READ TABLE P_I_EVENTCAT WITH KEY NAME = SLIS_EV_USER_COMMAND INTO L_EVENT.
IF SY-SUBRC = 0.
MOVE 'Z8_USER_COMMAND' TO L_EVENT-FORM.
APPEND L_EVENT TO P_I_EVENTCAT.
ENDIF.
form Z_MENU using p_extab type slis_t_extab.
SET PF-STATUS 'MENU_LIST'.
endform. " Z_MENU
form z8_user_command using p_ucomm type sy-ucomm
 p_selfield type slis_selfield.
case p_ucomm.
WHEN '&IC1'.
call screen 100.
endcase
endform.
Reward points if helpful.
Regards,
Hemant

How can i disable a button in the application tool bar of a standard trans?

Hi Experts,
   I want to disable the create button in the application tool bar of the standard transaction cv03n. Is there any method?

Hi,
In the include 'LCV110F19', the GUI is being called for the screen.
This is the actual code being called.
WHEN c_dms_create.
      SET PF-STATUS 'D100CREATE'.
      SET TITLEBAR 'D100CREATE'.
You can try to code something like below.
DATA: itab TYPE TABLE OF sy-ucomm.
APPEND 'CREATE' TO itab.
SET PF-STATUS 'D100CREATE' EXCLUDING itab.
Kindly reward points by clikcing the star on the left of reply,if it helps.

User exit/ BADI in f-32 / f-28 for adding application tool bar button

Hi Experts,
There is a requirement, for adding application tool bar button in the Transaction codes F-32 / F-28 / Feba_lockbox. So that while clearing documents with reference document, they can upload the data(Reference Documents) from local file and after the data is fetched for clearing, they need to download the data to local file for verification. If the data is verified to be okay, then they can go ahead with simulation and posting. They need this verification to be done in excel sheet, so need to download the data into local file.
I found a BADI in that screen is BADI_LAYER but I don't think it is relevant.
Any help is apreciated!
Is there any EXIT ? Because I can not find it too.
Regards,
Nitin

where you did the enhancement?
I have to create the IDOC once Clear docuemnt is created.. It may help me.

How to add button on application tool bar of standard transaction

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

HI
SHD0 is used to create and maintain Screen and Transaction Variants..
to know more about Screen and trransaction variants click on this link
http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm
we can create Transaction Variants Using SHD0 Transaction.
Transaction Variants and Screen Variants
Transaction variants can simplify transaction runs as they allow you to:
Preassign values to fields
Hide and change the 'ready for input' status of fields
Hide and change table control column attributes
Hide menu functions
Hide entire screens
In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions).

How to create a new push button in application tool bar in GMGRANT thru BDT

Dear SAP Gurus -
We have a requirement in 'GMGRANT' transaction. We need to create a button in the application tool bar of 'GMGRANT' transaction. Once the button is activated, if the user clicks on the button then it will go to a new screen (external screen). User can input data in to the external sceeen and upon saving, the data will be stored in to a custom table and when user clicks on 'back ' button user should come back to the GMGRANT transaction.
Just wanted to know, how to create / activate a new button on application tool bar of GMGRANT transaction and what are the configuration and detail steps to achieve the same through BDT.
We went through a lot of documents on BDT but do not have a proper solution.
Could you please help.
Thanks in advance.
Regards,
Atul Mohanty

hi,
You can find user-exits (menu exits) to add new menu item.
But, there is no possibility to add new buttons on application tool bar.
Regards,
Sailaja.

Tool bar for the screen

Dear friends,
I have developed one screen in whic i have to add tool bar, having options like filter, find , sorting , export etc.
Please help me out.
Thanks and Regards
Vivek Srivastava

HI Vivek,
Do not Double Post in Different Forums
in PBO
Module status_100.
in Program
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS'. " Just Double Click on this and go Expand Application Tool Bar
" and Enter the Names "Icons Activate
SET TITLEBAR 'TITLE'.
ENDMODULE.
Cheerz
Ram

Display of push button in the application tool bar in an ALV report

Hello everyone,
Query:
Is it possible to display a custom push button in the application tool bar while displaying an ALV report(1st one)?
On pressing this custom push button will I be able to display another ALV report(2nd one) based on the selection made on the current ALV report(1st one)?

Hiii..
I have written a sample code for You
"Call the below FunctionModule For Displaying The List
" And see the bolded line in the Below FunctionModule
" STANDARD_02 and USER_COMMAND are the subroutine Names
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
 i_callback_program = sy-repid
 i_callback_pf_status_set = 'STANDARD_02'
 i_callback_user_command = 'USER_COMMAND '
 i_structure_name = 'ZST_SCARR'
 is_layout = is_layout
 it_fieldcat = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
is_sel_hide = is_sel_hide
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
 it_events = e03_lt_events[]
IT_EVENT_EXIT =
is_print = t
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 t_outtab = it_scarr
EXCEPTIONS
 program_error = 1
 OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
 FORM PF_STATUS_SET
" Here Set A Button In Application Toolbar Using PF- Status
FORM standard_02 USING extab TYPE slis_t_extab.
SET PF-STATUS 'STANDA02' EXCLUDING extab.
ENDFORM. "STANDARD_02
*& Form USER_COMMAND
 text
 -->R_UCOMM text
 -->RS_SELFIELDtext
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
CASE r_ucomm.
 "menubutton with functioncode GOTO's Action
 WHEN 'GOTO'.
 READ TABLE it_scarr INDEX rs_selfield-tabindex. "cursorposit.
 IF sy-subrc = 0.
 WRITE:/ it_scarr-carrid,
 / it_scarr-carrname.
 ENDCASE.
ENDFORM. "USER_COMMAND
Hope it helps..
Regards,
Simy

Application tool bar at selection screen

Similar Messages

Maybe you are looking for