Application toolbar missing in Dreamweaver CC (Was: Appiction toolbar missing)

Can anyone help I'm new to dreamweaver and have recently installed a new cloud download installation, but I think it might be incomplete I cant find the appliction tool bar

Hi sandyxxx21,
Welcome to Adobe forums.
See http://helpx.adobe.com/dreamweaver/using/the-new-modernized-dreamweaver-cc.html for changes to application bar in Dreamweaver CC.
Thanks,
Preran

Similar Messages

  • I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

    I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

    Thanks Paul; but, taking your suggestion didn't solve the problem.  As mail is part of the OS, the updates don't have the capacity to reinstall applications; so, I had to reinstall the OS.  I now have my mail back (although it didn't appear on the dock--I had to go to applications and activate it and then put it back in the dock.  Thanks again for trying.

  • Applications folder missing from Dock and Finder

    I was a little confused to find my applications folder missing from the Dock on my Macbook Pro today - I can't think of anything which I may have done to actively cause it to go missing. I opened up the finder and dragged the applications icon from the LHS of the finder onto the RHS of the dock, but rather than reappearing in the doc it just disappeared.
    When I went back to the finder to try again I discovered that it had vanished from there as well. I ran a search in the finder for "applications" and found the applications folder in the results, but when I try to open it I get the following error message "The alias “Applications” can’t be opened because the original item can’t be found."
    Does anyone have any ideas on what might have caused this or on how I get my Applications folder back on the Dock? Any help would be really appreciated!

    The Applications folder on the dock is a shortcut, or more specifically, an alias.
    It sounds like what you did was to drag the Applications item from the Finder sidebar...which is also an alias. By dragging it from the sidebar, it's as if you'd dragged an icon off the dock. It poofs and disappears.
    To get them back, open a Finder window and navigate to Macintosh HD (or whatever you've named your hard drive). At the root level of the drive lives your Applications folder (the actual folder, not an alias). Drag that one to the sidebar to replace that shortcut, and drag it again to the Dock to replace that shortcut as well.
    If you click on Macintosh HD and all you see are System, Library, and Users and have no Applications folder, then something terrible has happened.

  • The folio for this application is missing resources

    Hi,
    In the Folio Builder I am able to build the application using the "Create App..." menu.
    When I'm trying to download the successfully built application from the DPS App Builder it says:
    "The folio for this application is missing resources. To resolve this issue, delete the folio and create a new one using Folio Builder Panel, then try building your application again."
    Thank you for your answer!
    vp

    Hello,
    I have the same problem and I have no idea how to solve it.
    When I'm trying to download the App for testing on ipad I get the message:
    Then I try to resolve this issue following instruction above and I still get the same message.
    vokopeti wrote:
    I've called Adobe Gold Support and the answer was it is not possible to create application with the folio builder throught the network anymore. We have to build the applications on the local mashine in the future.
    Following this tip I created my folio offline and then I uploaded to the folio producer and it worked.
    I was able to download both developper and distribution app.

  • How Do I Get Rid Of The Application Toolbar In CS4?

    I can seemingly turn everything else off. I don't want the Application Frame. I don't want the Application Toolbar. I just don't want it. My screen real estate is valuable to me and it's in the way. I can't even dock it on a side or as a tab somewhere. I need the vertical screen real estate. Where do I turn this off? And if it isn't possible--why NOT? This is a serious gripe and I'm going to see if I can scrounge up an old copy of PS. This is a waste of $700.

    I humbly submit that I was wrong. And sorry for the rant; this has been bugging me for a while. The menu item was indeed there--after I restarted PS while holding down command-option-shift. Best guess is something corrupted while/shortly after installing.

  • Screen Application toolbar.

    Hi Experts,
       I have created two buttons on application toolbar i.e. SAVE And CHECK.
    my requirement is when any one click on CHECK button then only SAVE button should active.
    how to do this?
    Thanks,
    Abhishek

    Hi Tarun,
    I didn't understand whether it would work with the code you have given,
    START-OF-SELECTION.
      SET PF-STATUS '<pf_status_name>' EXCLUDING 'SAVE'. "disable save button
    AT USER-COMMAND.
      CASE sy-ucomm.
        WHEN 'CHECK'.
          SET PF-STATUS '<pf_status_name>'. "enable save button when CHECK is clicked
          "other code
      ENDCASE.
    once you have set the pf-status, i doubt if it would work without using the immediately option...
    please check it out...
    Hi Abhishek,
    is it working without immediately option as well.... please do let me know as I tried from my end tarun's code was not working without immediately option and it worked with the code I pasted just before tarun.
    Regards,
    Pinaki

  • Air App for Android - error 301: application descriptor missing

    Greetings!
    I've been building in Flash for a while but am brand new to mobile development.  I'm currently trying to create my first Android app, a very basic game called "302 Saves The Galaxy". I don't intend to sell the game.  I'm really just trying to learn my way through the publication process for future projects.
    I've been able to get to the very last step in creating the apk file and I'm getting this error from the command-line process -
    "Error 301: Application descriptor missing/cannot be opened"
    Here's a screen shot of the command line window -
    Here are a few other details about my process -
    In Flash, I selected to publish to Air 2.0 because that's the only option I had (ie, no Air 2.5 option)
    I've triple-checked and all spellings seem to be correct in my command-line syntax
    I'm sure I'm missing something obvoius here.  Any suggestions?
    Thanks in advance!
    Joel

    Hi, Pahup!
    Thank you SO MUCH for that tip!  That solved the problem!  Like I said, I knew it must be something pitifully easy that I was overlooking. 
    Anyway, I really appreciate your taking the time to respond.
    Joel

  • Application toolbar of selection screen

    Hi,
    I'd like to add SEPARATOR (not button) to application toolbar of selection screen. Is it possible?
    Thanks
    Radoslaw

    Hi Kltys,
       Check the following sample programs:
    Selection Screen :
    demo_sel_screen_with_subscreen.
    demo_sel_screen_as_subscreen.
    demo_sel_screen_in_tabstrip.
    demo_sel_screen_with_tabstrip.
    DEMO_SEL_SCREEN_PUSHBUTTON
    D_ANALYSEREPORT_EABP_BUTTONS
    Reward Points if this helps.
    Manish
    Message was edited by: Manish Kumar

  • Multiple pushbuttons on application toolbar not fitting

    Hi ppl,
    I have a created a custom transaction wherein I need to display about 18 pushbuttons on the application toolbar.
    But, the problem is that all of these do not fit on the screen so I can see only about 10 buttons in my transaction (the last button is not even displayed completely).
    Please let me know if I can create a multi line application toolbar or is there any other solution for this?
    Regards.

    Hi ppl,
    I had a custom screen designed for my transaction.
    And I was able to display around 10 buttons on the application toolbar. No issues with that.
    Now, I have placed 9 pushbuttons on the application toolbar and the remaining are designed in the screen area.
    Thank you all for the quick and helpful replies.
    Regards.

  • Custom Button on Application Toolbar of VA01

    Hi,
    I have a requirement where i need to put in a button on the application Toolbar of VA01. This should be placed next to Orders button. I tried to find Exits, Badi's and Enhancement Spots but was not able to.
    There is one buton added and i have found the code for that but not able to understand how was it done.
    I checked in SDN too and found a couple of threads which explains that it could be done with GUIXT.
    Is this the only possible way or is there any other way in which this could be acheived.
    If GuiXT is the only solution, then let me know how can this be done or started since i'm New to GUIXT i don't have any idea about it.
    Thanks,
    Prashanth

    Hi,
    Check Enhancement spot ES_SAPMV45A. Check implementations in program MV45AF0C_CUA_SETZEN_BUTTONS.
    But be aware of the usage as you will need to replace a standard implementation.
    regards
    Nitesh

  • Applications going missing

    I had two applications go missing (not deleted by me). I can look back in TM and find them at 7:23PM Sat, but gone at 8:23PM Sat. Missing applications were KeyCue and EyeTV. Weird thing is I know EyeTV was running at 8:23PM Sat. KeyCue and EyeTV Helper are login items, but I don't see any other similarities. Has anyone seen anything like this?

    I can't think of a thing you can do, really, if you can't boot into your Recovery partition - it sounds as if your hard drive is dying. Which model MBP do you have? If it shipped with Lion, you could always try Internet recovery (holding down the Command, option and R keys whilst booting) and running Disk Utility to try to repair your hard drive. If that doesn't work, you'd just have to erase your hard drive and do a complete new system installation.
    Odd that you couldn't repeat the problem for the Apple Store techs... what's up with that?
    Clinton

  • Status without application toolbar?

    Hi all. Is anybody know if it's possible to set status without application toolbar? I meen if I use status without any buttons on application toolbar, there is a blank line on the screen in place of it. How can i remove it?

    If you are using module pool then you can use a opup screen or subscreen for this purpose.
    For creating buttons on the selection screen without using application toolbar,you can have a look at the following code :
    REPORT demo_sel_screen_pushbutton.
    TABLES sscrfields.
    DATA flag(1) TYPE c.
    SELECTION-SCREEN:
      BEGIN OF SCREEN 500 AS WINDOW TITLE tit,
        BEGIN OF LINE,
          PUSHBUTTON 2(10) but1 USER-COMMAND cli1,
          PUSHBUTTON 12(10) text-020 USER-COMMAND cli2,
        END OF LINE,
        BEGIN OF LINE,
          PUSHBUTTON 2(10) but3 USER-COMMAND cli3,
          PUSHBUTTON 12(10) text-040 USER-COMMAND cli4,
        END OF LINE,
      END OF SCREEN 500.
    AT SELECTION-SCREEN.
      MESSAGE i888(sabapdocu) WITH text-001 sscrfields-ucomm.
      CASE sscrfields-ucomm.
        WHEN 'CLI1'.
          flag = '1'.
        WHEN 'CLI2'.
          flag = '2'.
        WHEN 'CLI3'.
          flag = '3'.
        WHEN 'CLI4'.
          flag = '4'.
      ENDCASE.
    START-OF-SELECTION.
      tit  = 'Four Buttons'.
      but1 = 'Button 1'.
      but3 = 'Button 3'.
      CALL SELECTION-SCREEN 500 STARTING AT 10 10.
      CASE flag.
        WHEN '1'.
          WRITE / 'Button 1 was clicked'.
        WHEN '2'.
          WRITE / 'Button 2 was clicked'.
        WHEN '3'.
          WRITE / 'Button 3 was clicked'.
        WHEN '4'.
          WRITE / 'Button 4 was clicked'.
        WHEN OTHERS.
          WRITE / 'No Button was clicked'.
      ENDCASE.

  • Applications are missing after reinstall, etc.

    Hi, and thanks in advance for any assistance.
    After a reinstall, which had to be done after trying to create more startup disk space after stuff was backed up to an external HD (I hope that makes sense) some applications are missing from the applications folder. For example, Backup used to be there, with the little umbrella icon, and Canoscan used to be there, etc., but now to find them I have to go through Spotlight. I can access them that way, but how can I get their icons back into the applications folder, and why'd they vanish??
    Thanks,
    Kcat

    Hi, Miriam, and thanks for responding.
    My internal Mac HD is 74.4GB. Used 73.3GB. Available 1.79GB.
    My external Mufasa HD is 148 GB. Used 92.1 GB. Available 55.9 GB.
    In the midst of the horror (See my Question: "Startup Disk almost full. What do I do now?") Apple had me do an Erase and Install. I did indeed accidentally re-transfer all of my date from Mufasa back to Mac HD, but Apple worked with me to remedy much of that, though I couldn't repeat the myriad steps to accomplish that to you! I'm not even sure myself! I am not sure why I have so little room on Mac HD after all of this.
    Would the next step be to start burning data to CD-R or CD-RW disks? I'm not sure. I seem to need much of what I've saved, though I've deleted some stuff, of course. I have never burned a CD before. Is there a brand of CD that you recommend to do this? Any advice would be appreciated.
    Thank you for "Whatsize": As per your suggestion, I downloaded it and used that to give you the above info.
    Yes, Carolyn's idea about reinstalling Canon was a perfect confirmation!
    It helps me to know that others have gone through the weird subscription issue. I'll try your suggestion.
    Thanks again, Miriam,
    Kcat

  • Menu bar and application toolbar

    is there a way to change item text on menu bar and application toolbar  eg in business partner overview(T-Code fmcacov) i want to change text 'Business Partner" to "tax Payer" on both menu bar an application toolbar. i have tried the norma way of going to change the screen but when i am on the GUI status its not going to change mode even sfter entering the access key

    Hi ,
    Open the program and click on GOTO=>ATTRIBUTES.
    Change the text to the heading which you want.
    SAVE & ACTIVATE.
    Regarding opening in change mode, the steps you have carried out are correct.
    You need to comment the existing gui-status by placing cursor on that line & click delete.
    Then click on INsert button and add new gui-status.
    Best regards,
    Prashant

  • Problem with application toolbar

    Hi all
    I am facing a problem with the alv application toolbar.
    i have attached a custom  gui status to the alv but i am not able to see all the buttons created by me.
    some buttons are getting cut and i cannot see the buttons after scrolling as well
    Please suggest.

    Hi,
    U might have copied a standard PF-status into ur own status and added ur own buttons right....if it is so do not alter the std buttons sequence.......and add ur own buttons at the last.....
    also see if all de buttons are active...(red letters r inactive) activate den individually using function code button.....
    Cheers,
    jose.

Maybe you are looking for