Application updates issue after upgrading to 8.1

After upgrading to iTunes 8.1 I've got some ghost application updates indication.
Look at the screenshot: http://yfrog.com/0bitunes81bugp
Installing new applications doesn't do anything, installing new updates doesn't do anything either. However, when I deleted some junk app, it decreased the phantom updates counter by 1. So I guess that if I delete all the applications (or guess those 7 that cause it) and then re-download them, then all will be fixed, but that's some inconvenient hack.
Does anyone have a better solution?

Oh, thanks for all the support, I've found the cause and now I'm perfectly OK.
But, oh, Apple is screwed once again. I am not surprised at all. Find better programmers, **** you! And you should improve your customer support!

Similar Messages

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

Autoconfig issue after upgrading 12.1.1 to 12.1.3

Hi all,
I am getting below mention autoconfig issue after upgrading 12.1.1 to 12.1.3.
jtfictx.sh started at Mon Mar 28 08:28:50 EDT 2011
SQL*Plus: Release 10.1.0.5.0 - Production on Mon Mar 28 08:28:50 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
DECLARE
ERROR at line 1:
ORA-29858: error occurred in the execution of ODCIINDEXALTER routine
ORA-20000: Oracle Text error:
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operation
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 665
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 96
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Product
ion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
jtfictx.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
i got below mention some solution from metalink, but that does not working.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=743720.1
according to note we need to create index but its giveing below metion error.
SQL> @jtfiaibu.sql jtf jtf apps
Connected.
DECLARE
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10758: index owner does not have the privilege to use file or URL datastore
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 37
Thanks in advance,
Sandeep.

Hi,
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operationPlease make sure you have no invalid objects. And also please see of these helps. I know these are for older version, but please check
Script jtfictx.sh Failed While Attempting To Run The Autoconfig On APPS Tier [ID 1271186.1]
Autoconfig Returns ORA-29868 from jtfictx.sh [ID 386740.1]
By the way did u iinstall companion/examples CD after installing OracleSoftware
Thanks,
Taher

Another issue after upgrade to 9.0.2a beta

another issue after upgrade from 8.1.7 to 9.0.2a beta.
When I use "update-request", I need to specify a stylesheet. In that stylesheet, the following lines work before upgrade:
<row>
<fieldname1><![CDATA[<html><head></head><body>]]><xsl:value-of select="request/parameters/fieldname1/."/><![CDATA[</body></html>]]>
</fieldname1>
</row>
After upgrade, it doesn't work properly. What I see in the database field value is storing only
<html><head></head><body></body></html>
instead of storing
<html><head></head><body>fieldname1_value</body></html>
How can I get my result back?
Thanks in advance.

Thanks Steve,
I've upgraded to 9.0.2.0B but find the following error:
Oracle XSQL Servlet Page Processor 9.0.2.0.0B (Beta)
XSQL-017: Unexpected Error Occurred
java.lang.NoClassDefFoundError: oracle/jdbc2/Clob
at oracle.xml.xsql.actions.XSQLUpdateRequestHandler.handleAction(XSQLUpdateRequestHandler.java:103)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:134)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:139)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at oracle.xml.xsql.XSQLServlet.doPost(XSQLServlet.java:82)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:115)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:83)
at com.caucho.server.http.Invocation.service(Invocation.java:237)
at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:323)
at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:263)
at com.caucho.server.TcpConnection.run(TcpConnection.java:136)
at java.lang.Thread.run(Thread.java:484)
Does it relates to the changes of usage of the "update-request" syntax?
Thanks in advance
Felix

Stability issues after upgrade from 5 to 6.1?

Dear all,
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.
Many thanks in advance
Andreas

"Andreas Raab" <[email protected]> wrote in message news:[email protected]..
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.Hi Andreas,
Normally proving that rumors are true is a responcibility of
rumors suppliers. Reverse does sound to me like a joke.
Regards,
Slava Imeshev
P.S. Current weblogic 6.1 is a stable product.

Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query

Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
        INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
        FROM COSP CLIENT SPECIFIED
        WHERE GJAHR IN SELR_GJAHR
          AND KSTAR IN SELR_KSTAR
          AND LEDNR EQ '00'
          AND OBJNR IN SELR_OBJNR
          AND PERBL IN SELR_PERBL
          AND VERSN IN SELR_VERSN
          AND WRTTP IN SELR_WRTTP
          AND MANDT IN MANDTTAB
        GROUP BY (GROUP_LIST).
   LOOP AT I_COSP      .
     COSP                           = I_COSP      .
     PERFORM PCOSP       USING I_COSP-_COUNTER.
     CLEAR: $RWTAB, COSP                          .
     CLEAR CCR1S                         .
   ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.

Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
                   endselect.
   SELECT
into table
   for all entries in table
where.
   use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
    e.g in your case
          sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya

Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

Issues after Upgrade from Oracle 10.1.0.5 to 10.2.0.5 in Windows Server2003

Good Morning Good People,
I have run in to some issues after upgrading my 10.1.0.5 database to 10.2.0.5. Initially after the firtst upgrade from 10.1.0.5 to 10.2.0.0 one has to run Critical Patch set 4 to get to 10.2.0.5. Well after initial up grade everything worked fine. I could connect to the database from within the server as well as remotely through SQL*PLUS client. However, after completeing the patch I'm still able to connect to the database from within the server, but remotely i get the following error:
ORA-12514 : TNS Listener does not currently know of service requested in connect descriptor.
I also get Error ORA-12505: TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=mcquery2)(protocol=tcp)(port=1521))(connect_data=(sid=mcquery)(server=dedicated)))
I've tried serval different things to trouble shoot the issue but nothing seems to work.
If anyone has run into s similar issue please help. This is ruining my weekend! LOL!
Edited by: user10835577 on Aug 29, 2010 9:15 AM

From the client or the server?
SERVER:
tnsnames.ora:
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
FROM REMOTE SQLPLUS Client:
tnsnames.ora
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Client_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cotsdot370.cotsdot.dom)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
Thanks,
Malcolm
Edited by: user10835577 on Aug 29, 2010 12:01 PM

IPhone 4s issues after upgrading to IOS 8

Have few issues after upgrading to iOS 8
- Phone hangs every few hours, reboots automatically
- Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
- Searching for contacts is a problem
- Apps hang (especially facebook)
Any way to go back to iOS 7 ?
Any other tips / tricks appreciated..
Venkat

No way to come back to iOS 7 ...
But did you tried to reset all settings (general -> reset -> all settings) ?
For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings).

Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

Do i need to reinstall programs and applications like FCP after upgrading to the new Lion OS?

I've installed Lion over Snow Leopard and all my non Apple software is still here - you may want to check if your software will work with Lion and I would definately recommend having a bootable backup in case anything goes wrong
Regards,
Colin R.

Audio issues after upgrading to OS X 10.10 (Yosemite)

Hello,
I have been facing audio issues after upgrading to OS X 10.10
- No sound in VLC
- Re-booting with Option-Command-P-R did not work
- System sounds are fine
- Quicktime Player works just fine
I tried:
- Plugging in earphones while video was playing on VLC
- F10/F11/F12 while video was playing on VLC
- Re-boot with Option-Command-P-R keys (found on a thread elsewhere)
- Played something in Garage Band (found on a thread elsewhere) and restarted VLC
None of the above solved the issue
Any one else facing similar issue with VLC on 10.10?
How did you manage to fix this?
I am running VLC 2.1.5 btw.
Thanks in advance!

Shockwave says at the present moment not to be compatible with OS X 10.9 Mavericks.
Youtube, QuickTime, all play with no sound at all.

Performance issues after upgrading to 11g

hello,
We are facing a performance issue after upgrading from 10g to 11g.
as you can see, the tables named APPLSYS.FND_ENV_CONTEXT has grown to 15544880 records,
and oracle is using TABLE ACCESS FULL on it:
DELETE FND_ENV_CONTEXT E
WHERE NOT EXISTS
(SELECT 'X'
FROM FND_CONCURRENT_PROCESSES P
WHERE P.CONCURRENT_PROCESS_ID = E.CONCURRENT_PROCESS_ID)
AND ROWNUM < 10000;
Plan:
DELETE STATEMENT ALL_ROWSCost: 74,345
     5 DELETE APPLSYS.FND_ENV_CONTEXT
          4 COUNT STOPKEY
               3 HASH JOIN RIGHT ANTI Cost: 74,345 Bytes: 3,108,980 Cardinality: 155,449
                    1 INDEX FULL SCAN INDEX (UNIQUE) APPLSYS.FND_CONCURRENT_PROCESSES_U1 Cost: 166 Bytes: 315,450 Cardinality: 63,090
                    2 TABLE ACCESS FULL TABLE APPLSYS.FND_ENV_CONTEXT Cost: 69,124 Bytes: 233,173,200 Cardinality: 15,544,880
select num_rows,last_analyzed from dba_tables where table_name='FND_ENV_CONTEXT'
15544880 07/07/2011 12:08:55
please advice.
Ofer

Please see these docs.
Table Fnd_env_context Growing Very Fast [ID 419990.1]
FND Related Tablespaces Growing at Rapid and Excessive Rate [ID 189800.1]
FNDCPPUR Request Does Not Always Delete Files From The File System, Many Files Will Be Denoted As "deletion failed" [ID 1335304.1]
Concurrent Processing - Best Practices for Performance for Concurrent Managers in E-Business Suite [ID 1057802.1]
Concurrent Processing - Purge Concurrent Request and/or Manager Data Program (FNDCPPUR) [ID 104282.1]
Thanks,
Hussein

Is there a resource where I can see if my older versions of applications will work after upgrading to 10.8 from 10.6.8? I have some older Mac apps as well as things like Microsoft word and Adobe professional.

Is there a resource where I can see if my older versions of applications will work after upgrading to 10.8 from 10.6.8? I have some older Mac apps as well as things like Microsoft word and Adobe professional. I know PowerPC apps won't work, but I can't tell by the version numbers if they are PPC or Intel.

Dr Jack wrote:
I know PowerPC apps won't work...
Restore the ability of PowerPC apps to work: Install Snow Leopard (with Rosetta) into Parallels:
[click on images to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

I cannot update apps after upgrading to Yosemite. Please Help!

Hello,
After upgrading to Yosemite, i wanted to go on to iMovie, but i have to update. So i try to update but it refuses and tells me: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
So what i understand is because i bought this mac in the US and I'm using it in the UK its not letting me update it. But what i don't understand is that i was able to upgrade to Yosemite with my mac knowing i was in the UK.
How can i update my applications?
Thank you for your time,
TOAOMA

Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept it and the other iLife/iWork applications into your Apple ID, do so.
2. Move them out of the Applications folder(they may need to be put into the Trash temporarily), and then see if you can download them for free from their individual product pages. If you're asked to buy them, see #3.
3. Click here, contact Apple, and wait for a response.
4. Buy them.
(116660)

Unable to update apps after upgrading to yosemite

I have update my mavericks to Yosemite. But after upgrading , i m not able to update the apps. Its giving the error : "The update is not available for this apple id either because it was bought by a diff user or the item was refunded or canceled".
It is to be noted that the i haven't changed my apple id.

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, select the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
Step 5
According to a report, the error can result from changing the language setting of your Apple ID account. I can't confirm.

Application updates issue after upgrading to 8.1

Similar Messages

Maybe you are looking for