Application Usage Report not working

I'm using ARD 3.1 to help manage 190 10.4.8 clients.
I have the data settings for all my client computers set to collect application usage data and user accounting data. I have not set them to upload the data to an ARD server. I assume that this means the usage data will be stored on each client and when I request an application usage report from a client it will be available to upload.
When I request the application usage report the task fails with the message "Couldn't collect report data".
Can anyone tell me what I'm doing wrong here?

I believe that, if you you disable uploading, it automatically disables the automatic report data generation on the clients... but I may be wrong. In order to track application usage and user accounting, I you might need to enable the automatic uploading.
The other thing to try would be to check the "Rebuild data for report" checkbox when running a report. This is the "hint" to the client that it needs to send data to the admin.

Similar Messages

Issue is TEXT_IO application API is not working in report builder 10g.

Issue is TEXT_IO application API is not working in report builder 10g.
TEXT_IO application api is working in report builder 6i. (Not working in upgrade from Oracle EBiz 11i to Oracle Ebiz R12)
I saw that details in some forums, client_text_io is available for form builder 10g.
Is any other api available for report builder 10g?
If it is available what steps we need to do?

All the CLIENT_% procedures are part of webutil in Forms. Forms uses the Java applet on the client PC to perform actions on the local PC via webutil. This is not possible for Reports.
You can still use text_io on the server, but you need some other way to copy the files to/from the client PC.
I wonder how you used the functionality in EBS R11. Even R11 uses web reports, so text_io already worked on the server, not the client PC.

Application Usage Report Blank - ARD 3.8

We are trying to run an Application Usage Report on one of our clients. We are using both 3.8 Admin and Client.
It will run the report but the output is simply blank.
Has anyone seen this before? Any advice. Tried it on several clients and same issue each time.

Hi all - I'm suffering from similar ARD/VNC/ScreenSharing problems, too - in this case however Yosemite to Yosemite!
Client computer:
     Laptop: MacBook Pro
     Yosemite 10.10.2
     ARD 3.8.3
Remote Computer:
     Desktop: MacMini
     Yosemite 10.10.3
     ARD 3.8.3
I cannot connect to my remote machine (to control or just view it), neither with ARD nor with VNC.
It does not work with Remote Management enabled nor Screen Sharing.
Attempting a connection reports - after a while - the error "Connection failed ... Please make sure that Screen Sharing ... is enabled" (but it is enabled!)
In the log on the client machine the following entry appears:
Screen Sharing: SSSessionView.m:1815:-[SSSessionView ssSession:connectDidFail:]: Communications error
In the log on the remote machine the following entry appears:
com.apple.xpc.launchd[1]: (com.apple.screensharing[692]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.screensharing.server
Note, however that other functions work:
- On my Laptop ARD reports that the remote computer is available and displays the user and the current application correctly
- A connection does seem to be established between the client and the remote machine, because I can send a "Message to the Administrator" from the remote machine back to the client machine, which is correctly displayed on the client machine.
Come on Apple - you seem to have forgotten your credo "It just works!"
I thought I would never say it, but thank god for TeamViewer!

IPhone 6 Battery Usage setting not working.

When I go to my setting and check my Battery Usage setting it states: "Battery information will be available after using iPhone for a few minutes". I've been using it for hours and I get the same response when I go to the setting. I've turned off my phone multiple times to see if that would resolve it, but it hasn't. Is anyone else experiencing this behavior?

Hello.
I have the same problem. iPhone 5, iOS8.0.2, used for a few days - still no usage statistics, only "Battery information will be available after using iPhone for a few minutes".
I tried restore iPhone (DFU) without restoring backup from iCloud/iTunes, resets, hard-resets, erase all settings, drain battery to 0% and charge to 100% overnight etc. - nothing helps.
I wrote to the Apple about this problem.
Here is the page that you can use to contact with Apple and report a bug - https://www.apple.com/feedback/iphone.html
Please, give the title of "iOS8 battery usage statistics not working" (or something like that), choose the "Bug report" and describe the problem. Perhaps it will make that Apple will eliminate this problem in the next version of iOS. More report - greater chance.
Regards

IPhone 6 Battery Usage function not working

Battery Usage feature continues to read; "Battery information will be available after using iPhone for a few minutes" even though I have now had the phone and used it for one week. Using iPhone 6, 64G, IOS 8.0.0.(no iOS updates have yet been applied)
A few days ago I attempted some suggestions posted by others. One of those was to let the battery drain to zero then fully charge. This had no affect on the Battery Usage feature. Another suggestion that i tried was to close all open apps on phone, then shut down phone and then turn back on. This did not resolve the Battery Usage issue either.
Is apple aware of this issue? Any help would be appreciated.

Hello.
I have the same problem. iPhone 5, iOS8.0.2, used for a few days - still no usage statistics, only "Battery information will be available after using iPhone for a few minutes".
I tried restore iPhone (DFU) without restoring backup from iCloud/iTunes, resets, hard-resets, erase all settings, drain battery to 0% and charge to 100% overnight etc. - nothing helps.
I wrote to the Apple about this problem.
Here is the page that you can use to contact with Apple and report a bug - https://www.apple.com/feedback/iphone.html
Please, give the title of "iOS8 battery usage statistics not working" (or something like that), choose the "Bug report" and describe the problem. Perhaps it will make that Apple will eliminate this problem in the next version of iOS. More report - greater chance.
Regards

Crystal report not working on 64 bit machine

Hello friends,
Hope everyone is doing good. I have an issue and you all are requested to help me out.
I have build an Application using VS 2008, i used Oracle 10g as database and Crystal report 2008 for reports. The Application and reports are working fine when i deploy it on 32 bit machine, but when I deploy it on a 64 bit machine, my Application works fine but reports are not displayed, when ever i run report it ask Db credential with the following message
"The report you requested requires further information."
then Server, user ID and password filed, I off course supplied credential but no results.
For resolving the issue i installed VS 2008 on 64 bit machine with redist CR Viewer and tried to verify database for the report thinking this might be an issue, but in CR designer it gives me following error when i tried to verify database or create new connection using OLEDB provider for Oracle
Crystal Reports ActiveX Designer
Logon failed.
Details: ADO Error Code: 0x
Source: Microsoft OLE DB Provider for Oracle
Description: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
OK
I tried the following fixes as well:
- Installed CR viewer for 64 bit machine
- Registering ORAOLEDB10.dll
- Reinstalling VS 2008
The Application works fine but Crystal reports are malfunctioning. Please help!!!!!!!!!!!!!!!
Thanks a ton in Advance
Happing coding and resolving issues
Danish Mustafa Khan

Also, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] article.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes.

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy. What should I do?
I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM. But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install. It is like an infinite loop!
Please, someone help!
Thanks!

HI gener7!
I'm sorry but I am not on Creative Cloud. I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application. My AAM version is: 8.0.0160
The link you provided was the update that I wanted to install but it does not work. A window shows up during that install that says:
We've encountered the following issues.
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem.
and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
Thanks!

Drill down report not working in 1og report

hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanks

Hello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards

CDR report not working

Hi,
We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
Kindly suggest troubleshooting steps.
Can we have any SQL query to fetch the report from database?
Thanks
jitender

Hi Raju,
From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
" No results match the report filters. Change the filter values and submit the query again."
Thanks
jitender

IPS event monitor and reports not working

Dear after upgrading my IPS from E3 to E4  the event monitor and reports not working, can you please advice my to solve this issues

Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
    hostId: SSM02
    appName: sensorApp
    appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature:   description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
    subsigId: 0
    sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
    attacker:
      addr: 172.x.x.x locality=OUT
      port: 39715
    target:
      addr: x.x.x.x locality=OUT
      port: 514
      os:   idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz

Application Parameter does not work on migrating

We have encountered this various times.
When we add an application parameter to an existing application, it does not work on migrating.
We have to make a new service (application) and then attach the parameter to it, then it works.
What is the reason for this behavior?
Eg: I added the parameter WDDISABLEUSERPERSONALIZATION and set it to X in development. Works fine there. On migrating to UAT, it does not work. What's amiss?
Thanks in adv.

Hi Aishi,
maybe SAP Note [1332644|https://service.sap.com/sap/support/notes/1332644] "WDA Application Parameters are not changed in all clients" might be helpful in your case.
Best regards,
Andreas

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Interactive Reports not working with APEX listener

Hi,
I have posted this question APEX listener forum couple of weeks ago but very few responses.
If any one from here can help then it would be great.
Interactive Reports not working with APEX listener
Best Regards,
Baig

Sorry for late response.
It was a firewall issue

New Applications model DOES NOT work with StandAlone OSD media

If you are able to create StandAlone OSD media, the new Applications model DOES NOT work with it.
- The creation of the media will be successful
- The application installation itself will be successful
Yet after the application is installed, it shows the correct process it needs to complete based on the return code in AppEnforce log, but does not process that information back to the the TS Manager so it appears to attempt to download a policy which fails
causing the task sequence to error out..
Thanks,
Squirre1

It is very similar to this description:
http://madluka.wordpress.com/2012/05/15/error-0x8000405-when-installing-applications-to-a-workgroup-system-during-build-and-capture-task-sequence/
It is using the application model, since it is not attached to the domain it is on a workgroup. But it is on standalone media and not during a build and capture sequence, it is during an OSD. But alot of the same puzzle pieces fit. Basically pointing to
the new applications model not working during standalone OSD when the MP is not available. i would say that not enough information is getting encapsulated into the Application when exported onto the StandAlone media.

Application Usage Report not working

Similar Messages

Maybe you are looking for