Application Validation Error

I have 12 different "applications" in planning that function as 1 application, 11 different cubes of responsibility that all partition to a consolidated app.
Planning/essbase 9.3.1.
I made a change to what is loaded to the "units" (country) dimension as the users want to see many different alternate hierarchies, and now when I try to validate an application I am receiving the following error..
"Error : Server was unable to process request. ---> Object reference not set to an instance of an object."
What does this error mean?
Robert

Are you using 9.3.1 and EPMA, if so you are very brave.
If do a seearch on the error you will find it many times in the EPMA world, sometimes restarting the services helps, sometimes you end up having to go to backup.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, Naman

Hi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu

HFM Application Library error Null while deploying the validated app

Hello,
I am trying to deploy a HFM application on EPM 11.1.3 and when I right click on the application in Application library of EPMA, I am getting a pop-up with the following error:
Application Library Error
null
Please note:
1. This is a EPMA managed HFM application.
2. The validation of the application is successful.
3. Deployement errors with the above error.
4. It is on Windows 2003 server with MSServer as the RDBMS.
Please help me resolve this issue.
thanks,
Ankit

Hi Ankit,
This would be normally resolved by Restarting the EPM Services and also remember to restart the Calculation manager services as well.
Once the services are restarted try deploying the application again to see if it deploys successfully.
Hope this helps,
Thank you,
Charles Babu J

Unable to open SharePoint 2010 task from any Microsoft Office application - cannot open a new form (schema validation errors)

I can’t get the Microsoft Office SharePoint Task integration to work with any SharePoint 2010 Workflows. When any end user clicks the “Open this task…”
button from outlook (or any other office application) a warning dialog appears stating that:
“Outlook cannot open a new.
The form contains schema validation errors.”
The error details are:
Element '{http://www.w3.org/1999/xhtml}div' is unexpected according to content model of parent element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}Body'.
Some points to note:
I can replicate this using on several computers running as different users.
I have full control over the site and the task I am trying to open.
When I navigate via the SharePoint site I can open the task.
The Info Path form that cannot be opened was automatically created by automatically SharePoint designer / InfoPath. I have subsequently deleted the form and published
the workflow (which created the InfoPath form again).
I am running Mircosoft Office Professional Plus 2010 version 14.0.5128.5000 (32-bit)
One workaround is to remove the “Open this task…” button as per
http://social.msdn.microsoft.com/Forums/en-US/sharepoint2010general/thread/eb273ee9-6a4b-409c-8eb0-5351bb113386/. This is not ideal and will be my last resort.
Any suggestions and or thoughts appreciated.
Thanks!

Yes, I tried that. It did not work for me.
I have 4 site collections. The main site collection is the only one that I receive the error.
When the user clicks on the email link and opens the document for approval, they receive the following error when they click on "Open This Task".
Element '{http://www.w3.org/1999/xhtml}a is unexpected according to content model of
parent element '{http://schemas.microsoft.com/office/infopath/2009/WSSList/dataFields}Body'.
There is nothing wrong with the task list itself, just the link from the Office 2010 client.
I am wondering if there is a web config or other file on the server that is specific to the site collection??
Tracey

Validation errors in invoke application phase

Hi,
Is it possible to some how cause validation errors in the invoke application phase?
I have a search form which uses a request scope managed bean. When the normal validations (one required field and another custom validator) fail in the validations phase, the form is redisplayed with errors and the user can hit submit again and the form will do as expected.
I would also like to cause this behaviour if there where no search results, or more than the maximum, but as the bean is in request scope, when the form is redisplayed with these error messages if the user hits submit again the form is simply reloaded with the same values but no errors and the invoke application phase is never reached. They have to then hit submit again for it to work.
Upon either of these errors I add a faces message to the context which gets displayed properly, but that doesn't seem to suggest validation error so request is still ended. I though by setting one of the components to invalid (by binding it to the managed bean) it would work but no joy.
Any ideas how I can achieve this?
Thanks!

Hi I am also facing the issue. If any one got the solutoin for this please post it
Thanks
Kaal

Weblogic app server wsdl web service call with SSL Validation error = 16

Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
     System.setProperty("javax.net.ssl.trustStore",”cacerts”);
     System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
     System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
     System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd);      System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1.     Do I create “cacerts” the correct order with right keeltool options?
2.     Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3.     Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4.     Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
     <wsp:Policy wsu:Id="TokenServices_policy">
          <wsp:ExactlyOne>
               <wsp:All>
                    <sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
                         <wsp:Policy>
                              <sp:TransportToken>
                                   <wsp:Policy>
                                        <sp:HttpsToken RequireClientCertificate="true"/>
                                   </wsp:Policy>
                              </sp:TransportToken>
                              <sp:AlgorithmSuite>
                                   <wsp:Policy>
                                        <sp:Basic256/>
                                   </wsp:Policy>
                              </sp:AlgorithmSuite>
                              <sp:Layout>
                                   <wsp:Policy>
                                        <sp:Strict/>
                                   </wsp:Policy>
                              </sp:Layout>
                         </wsp:Policy>
                    </sp:TransportBinding>
                    <wsaw:UsingAddressing/>
               </wsp:All>
          </wsp:ExactlyOne>
     </wsp:Policy>
     <wsdl:types>
          <xsd:schema targetNamespace="http://tempuri.org/Imports">
               <xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
               <xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
          </xsd:schema>
     </wsdl:types>
     <wsdl:message name="ITokenServices_GetUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
     </wsdl:message>
     <wsdl:portType name="ITokenServices">
          <wsdl:operation name="GetUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="TokenServices" type="tns:ITokenServices">
          <wsp:PolicyReference URI="#TokenServices_policy"/>
          <soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="GetUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:service name="TokenServices">
          <wsdl:port name="TokenServices" binding="tns:TokenServices">
               <soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
               <wsa10:EndpointReference>
                    <wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
               </wsa10:EndpointReference>
          </wsdl:port>
     </wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>

I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server.

How do you resolve Financial Management service validation error in EPM ?

Does anyone know how to resolve Financial Management service validation error from EPM Diagnostic Report?
Environment:
Quad-Core AMD Processor 2.2 GHz (Server Machine)
5 GB RAM
Server 2003 Standard 32-Bit SP2 (also tried in Enterprise)
Application Server:
WebLogic Server 9.2 Custom Installation (with Add-Ins)
http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
Database:
Oracle 10gR2 (Standard Installation per step-by-step guide from Oracle)
http://www.oracle.com/technology/software/products/database/index.html
Hyperion EMP System 11.1.1.3:
Installer
Foundation Services (4 Files )
EMP Architect
Financial Management, Planning, Financial Reporting and Web Analysis (primarily interested in FM)
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
The following are the sequences of steps carried out during the Installation and Configuration of EPM:
1)     Installed the Server along with its respective SP2 – Shutdown the machine
2)     Assigned IP and DNS addresses
3)     Installed Window components by ticking Application Server Console, Enable COM+ access, IIS and DNS
4)     Run “dcpromo” to create a Domain Controller with default values and assigned a domain name – Shutdown the machine
5)     Installed Weblogic Server 9.2 and configure it using Configuration Wizard – Selected “test environment” and ticked default “listening port” – Shutdown the machine
6)     Basic installation of Oracle Database 10gR2 using Step-by-Step guide provided by Oracle and carried out Password Management steps. After installation, I then created a user “oracle” and assigned it to ora_dba User Group with the required Local Security Policies – “log on as a batch job” and “Act as part of operating system”
7)     Logged into database and acknowledge the licensing window – Shutdown the machine
8)     Restarted the machine and checked all relevant and newly installed Database and WebLogic services are running.
9)     Started Installing EPM components by double clicking “InstallTool.cmd” and selected all relevant components at ONCE as per Installation Guide – Result: - All selected EPM components were successfully installed without errors or exceptions
10)     At the end of installation window, I carried out the configuration in the following scearios:
Scenario 1: Configuration all at Default settings
Scenario 2: Configuration all, except “Application Server” I selected the WebLogic9.2
Scenario 3: Configuration all, except “Application Server” and “Workspace Web Server” were being Welogic9.2 and IIS HTTP
RESULT: After all numerous installations, all came down to ONE ERROR from “Diagnostic Report” stating the following:
Financial Management:
FAILED SVR: HFM Service Validation Check if HFM service in working state.
Error: Error message: <03/11/2010 05:32:26 PM> CreateApplicationCAS... Failed at line: 2
Recommended Action: Make sure HAT utility is working. 1 s
I then simply ignored this error and tried to deploy an Application, all worked fine until you get to the point at “Job Console” where you need to press “Refresh” button. Progress remained at 12% until it got timedout after 300 seconds and force attempt of refreshing resulting in “aborted” job with the following error:
Error Reference Number: {DB3940F5-2D4A-46AB-A370-77F82F121BBA}
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:39:58 PM;Svr: PBAR;File: CHsvDataSourceImpl.cpp;Line: 196;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1276;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1190;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: AgentHelper.cpp;Line: 728;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 1;DTime: 4/12/2010 4:40:08 PM;Svr: PBAR;File: CHfmAwbAgent.cpp;Line: 744;Ver: 11.1.1.3.0.2413;
This is, I believe preventing me from deploying Consolidation Apps, including Sample Application provided with EPM Downloads. I have tried installing and configuring by components. All failed with the same outcome.
I have been working on this effortlessly in different combinations to get at least one Financial Management Application get deployed so I could enhance my learning adventure. As it stands, I am not sure where to get help and completely lost in the World of Oracle. I am also come to wonder whether “Free Downloads of EPM” are indeed, is “complete and is in working-state” or do I need a licence to use for personal learning experience? Are there different downloads for different needs or/users For example, eDelivery downloads are different from OTN Agreement downloads?
I have downloaded the files from following URL:
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
I am completely lost and all services are up and running and not sure what I am missing!! Any assistance will be greatly appreciated.
Many Thanks
BT
Edited by: user8973921 on 13-Apr-2010 05:08
Edited by: user8973921 on 13-Apr-2010 10:56
Edited by: user8973921 on 14-Apr-2010 02:30

I am having exactly the same problem using Windows 2003 Standard editions SP2. Is there anyone who knows a possible solution for this? The effect on HFM is that is not possible to create an application, since I always get an error that says "Server execution failed"
Error Reference Number: {E68F87E6-588E-4665-862C-AAB02CB299DA}
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServerImpl.cpp;Line: 3522;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 1115;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 857;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxClient.cpp;Line: 2106;Ver: 11.1.1.3.0.2413;

Invoice Validation Error ORA-06512: at "APPS.AP_APPROVAL_PKG", line 111124

All,
I am getting below error message from log file after Invoice Validation program error out, please advise.
I could not search on "ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124" search, but found other errors and able to see we are very much higher file version than the note id advised.
Please help any one for this issue.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APPRVL module: Invoice Validation
Current system time is 01-MAR-2013 03:40:12
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_option='All'
p_inv_start_date='2013/02/01 00:00:00'
p_inv_end_date='2013/02/28 00:00:00'
p_trace_flag='N'
p_commit_size='1000'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
MSG-00101: Error occured in BATCH_APPROVAL()
MSG-00102: Error Code : -20001
MSG-00103: Error Message : ORA-20001:
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124
MSG-00000: When Others:User-Defined Exception
REP-1419: 'beforereport': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00101: Error occured in BATCH_APPROVAL()
MSG-00102: Error Code : -20001
MSG-00103: Error Message : ORA-20001:
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.AP_APPROVAL_PKG", line 11124
MSG-00000: When Others:User-Defined Exception
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 10.1.2.3.0 - Production on Fri Mar 1 03:40:15 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 42770000.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 01-MAR-2013 04:06:57
---------------------------------------------------------------------------

Please post the details of the application release, database version and OS.
Please also see these docs.
Invoice Validation (APPRVL) Errors Out With ORA-20001: APP-SQLAP-10000: ORA-00060 [ID 1460249.1]
R12: Invoice Validation Is Failing When Running With Parameter 'ALL' [ID 1115016.1
R12 Payables Invoice Validation Error: Unexpected error occurred during Tax Calculation. [ID 961182.1
Ap Invoice Validation Errors: P-1419: Msg-00101: Error Occured In Batch_approval [ID 1140828.1]
Invoice Validation Error : REP-1419:ERROR OCCURED IN BATCH_APPROVAL() [ID 1120213.1]
R12: Validate Invoice Errors APP-SQLAP-10000, ORA-01403 and ORA-20001 [ID 1308869.1]
Thanks,
Hussein

Crystal report for visual studio 2010 data source object is not valid error

Hello,
I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
On my developer station, this operation works without problem but on client station, I get this error.
The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
Can someone help me?
Thank you.

Thank's for your answers
Dim rsPkLst As ADODB.Recordset = Nothing
Dim report As New crPickingList
' Fill ADODB.Recordset with SQL Statment
If rsPkLst.RecordCount > 0 Then
report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
EndIf
This error appears during "report.SetDataSource(rsPkLst)" instruction.
ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
Developer and client station runs under Windows XP SP3.
On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
On client side I install CRRuntime_32bit_13_0_1.msi.
Both stations use Microsoft .Net Framework 4.
Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
(I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
David.

Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine. I have only built the machine, and tried to load the Drivers.
I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD. I identified that the Bluetooth driver was the issue. I then did not load the Bluetooth
drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os. (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
I have not received a single Update either. The Auto update feature claims that I am up to date. I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain. Also the results of the sfc /scannow are copied below.
My Questions
I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom. Will you take a look??
Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
drivers work. (including the blue tooth)
The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
Errors and Results.
There are also a number of logs that show various Crit, Error, and Warning logs. I will include those if need be.
This is the majority of the error messages, and I have missed the opportunity to capture others.
Internet explorer encountered Validation errors:
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : comctl32.dl
iii.
Assert offset: 00133A2A
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 008BE823
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0040F9E8
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : iertutil.dll
iii.
Assert offset: 001DEC51
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 00014159
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Microsoft Management Console Encountered a Validation Error
Validation Error
i.
Process Name: mmc.exe
ii.
Module Name : ieframe.dll
iii.
Assert offset: 00000000006C9283
Scripted Diagnostics Native Hot encountered a Validation Error
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : urlmon.dll
iii.
Assert offset: 00000000001A0A73
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017f32
Windows System Assessment Tool encountered a validation error
Validation Error
i.
Process Name: winsat.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017F32
Windows Explorer Encountered a validation Error
Validation Error
i.
Process Name: Explored.exe
ii.
Module Name : thumbcache.dll
iii.
Assert offset: 00000000000300BE
AI Suite 2 encountered a validation error
Validation Error
i.
Process Name: AI Suite 2.exe
ii.
Module Name : ntdll.dll
iii.
Assert offset: 000686BD
the number “2” is the substitutedfor the roman numeral 2
I believe that this is part of the MB Suite.
My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download. Activated on 8-12-2012
Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
Chip Set: bx80619i73930k
2x Memory: cmx16gx3m2a1600c11 Corsair
Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
Generic optic drive: SH-222bb/bebe Samsung
Here is the Microsoft Fix It error code
Assertion Failed!
Program:…
File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
Line: 2131
Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
(Press Retry to debug the application – JIT must be enabled)
                Abort    Retry     Ignore
Abort
Closes the program
Retry
Repeats the error
Verbatim
Ignore
Closes the program
Nothing happens
Here is the Microsoft Genuine Advantage Diagnostic Report
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-*****-*****-8C7YB
Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
Windows Product ID: 55041-146-2397786-86942
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
Installation ID: 000792957432055771547065313840421702569731971164600080
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 8C7YB
License Status: Licensed
Remaining Windows rearm count: 5
Trusted time: 8/12/2012 5:47:25 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name           OEMID Value     OEMTableID Value
APIC                                    ALASKA
A M I
FACP                                   ALASKA
A M I
HPET                                    ALASKA
A M I
MCFG                                 ALASKA
OEMMCFG.
SSDT                                    AMICPU
PROC
Scan Now Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\Windows\system32>

Thank you for your valuable time.
I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
The Memory Tool did not find anything amiss.
As per another thread I am going to try flashing the bios as well with the updates.
Following are the Chkdsk results.
Are there any other suggestions?
Chkdsk Results
Checking file system on C:
The type of the file system is NTFS.
A disk check has been scheduled.
Windows will now check the disk.
CHKDSK is verifying files (stage 1 of 5)...
89600 file records processed.
          File verification completed.
221 large file records processed.
0 bad file records processed.
1596 EA records processed.
44 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
131874 index entries processed.
Index verification completed.
0 unindexed files scanned.                                           0
unindexed files recovered.                                       CHKDSK
is verifying security descriptors (stage 3 of 5)...
89600 file SDs/SIDs processed.
Cleaning up 36 unused index entries from index $SII of file 0x9.
Cleaning up 36 unused index entries from index $SDH of file 0x9.
Cleaning up 36 unused security descriptors.
Security descriptor verification completed.
21138 data files processed.
CHKDSK is verifying Usn Journal...
36120296 USN bytes processed.
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
89584 files processed.
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
476262075 free clusters processed.
Free space verification is complete.
Windows has checked the file system and found no problems.
1953410047 KB total disk space.
48065140 KB in 61610 files.
     43468 KB in 21139 indexes.
         0 KB in bad sectors.
    253139 KB in use by the system.
     65536 KB occupied by the log file.
1905048300 KB available on disk.
      4096 bytes in each allocation unit.
488352511 total allocation units on disk.
476262075 allocation units available on disk.
Internal Info:
00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00 .^...B..........
e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00 ....,...........
6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00 m.u.i...........
Windows has finished checking your disk.
Please wait while your computer restarts.

Validation error while trying to change a value in a request scope bean

- JBoss 4.2.3.GA
- JSF 1.2_09-b01-BETA1 (Mojarra)
- Java 5 Update 17
Hello, everybody!
I'm having the following problem in my JSF web application:
I have a request scope backing bean. The first time this bean is loaded (I check
this with the ResponseStateManager.isPostBack() method) I fill a list of SelectItem
instances that are to be displayed in the JSF page in a +<h:selectOneMenu>+ component.
The list goes, of course, to the +<h:selectOneMenu>+'s +<f:selectItems>+ facet child
component. In the constructor I also define the value that goes to the value property
of the +<h:selectOneMenu>+ component. This value is a property in the backing bean, as
is the list of SelectItem instances. Until now we have something like this:
The backing bean declaration in faces-config.xml:
<managed-bean>
    <managed-bean-name>solicitacaoGeral</managed-bean-name>
    <managed-bean-class>br.urca.solicitacoes.web.PaginaSolicitacaoGeral</managed-bean-class>
    <managed-bean-scope>request</managed-bean-scope>
</managed-bean>
The relevant parts of the JSF page:
<h:form id="form">
    <h:selectOneMenu value="#{solicitacaoGeral.setorOrigem}" id="foco">
        <f:selectItems value="#{solicitacaoGeral.setoresOrigem}" />
    </h:selectOneMenu>
</h:form>
The relevant parts of the backing bean class:
public class PaginaSolicitacaoGeral
    private final List<SelectItem> fSetoresOrigem = new ArrayList<SelectItem>();
    private Setor fSetorOrigem;
    public PaginaSolicitacaoGeral()
        if (primeiraExibicao()) // First load (!ResponseStateManager.isPostBack())
            // Fill fSetoresOrigem...
            fSetorOrigem = ...
        else // Page submitted
            // Read below...
    public List<SelectItem> getSetoresOrigem()
        return fSetoresOrigem;
    public Setor getSetorOrigem()
        return fSetorOrigem;
    public void setSetorOrigem(Setor setorOrigem)
        fSetorOrigem = setorOrigem;
    private boolean primeiraExibicao()
        String idFerramentaExibicao =
            FacesContext.getCurrentInstance().getViewRoot().getRenderKitId();
        ResponseStateManager gerenciadorEstadoResposta =
            RenderKitUtils.getResponseStateManager(
            FacesContext.getCurrentInstance(), idFerramentaExibicao);
        return !gerenciadorEstadoResposta.isPostback(
            FacesContext.getCurrentInstance());
}But when the user submits the form and the bean constructor is called again
(this time the method ResponseStateManager.isPostBack() returns true ),
in the else block in the constructor above, I need to fill fSetoresOrigem with
other values and also the fSetorOrigem field because, of course, the fSetorOrigem
field has to be a valid value that exists in the new fSetoresOrigem list.
JSF is not complaining about the change to the list items, but it is complaining
to the change to the fSetorOrigem field (the list value), even though it is a
valid value present in the list. So I'm getting this error message:
08:23:54,312 INFO [lifecycle] WARNING: FacesMessage(s) have been enqueued, but may not have been displayed.
sourceId=form:foco[severity=(ERROR 2), summary=(form:foco: Validation Error: Value is not valid), detail=(form:foco: Validation Error: Value is not valid)]I suppose that JSF is comparing the new value of the field fSetorOrigem with the value
it has in the view state. As the value is different it is raising the error. That's
what I suppose. But am I not able the change the value in the postback? I've already
checked and the value is valid. It corresponds to a value that exists in the list.
I really need a solution to this problem as I'm stuck with this and can't proceed until
I find a solution to this. What I am doing wrong and how can I solve this?
Thank you very much.
Marcos

BalusC wrote:
It is comparing the selected value against the List<SelectItem> returned by getSetoresOrigem() as it is during the apply request values phase of the form submit request.Ok. That's what I supposed JSF was doing.
BalusC wrote:
If the selected value isn't in there, then you will get this error.I can understand this, but is this right? As I said, the old value isn't really there because I changed the list values to new ones. But the new value (the value of fSetorOrigem ) corresponds to a value that exist in the new list items, so a valid value. So JSF is not considering that I also changed the list, not just the value. It is comparing the new value with the old list, not the new one. Acting like this JSF is making the page looks like a static HTML page, not a dynamic one. If I can't change the list and the value, what's the point of that? In my point of view I'm not doing anything wrong, I'm not violating any JSF rules.
Marcos

Validation error for tag cfloop

Hi All,
Complete newbie to CF here. I've inherited (or bought) an online business which has its site written in CF. I haven't done this sort of stuff before but do work SQL for a living and object oriented stuff plus have done a bit of html and php so CF isn't mind blowing to me (in its simple form).
I've downloaded my site on to my computer to run a local copy that I can hack to pieces if needs be. For some reason, I have a few problems with the site running locally. The first error I'm getting is a Attribute validation error for tag cfloop.
Basically, index.cfm has this bit of code in it:
<cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
    <cfinvokeargument name="storedProcedure" value="usp_GetFeaturedWineries">
</cfinvoke>
Ok, easy enough. Anyway, there's a call down the page to:
<cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
Within displayFeaturedWineries.cfm is the code that calls the stored proc invoked above:
<cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
Bam, that's where the error occurs. "The value of the attribute query, which is currently getFeaturedWineries_qry, is invalid.
What??? The stored proc exists and it only returns two records (which begs me to wonder why you would have startrow and endrow but anyway, it doesn't work with or without it).
The other interesting thing is that this works on production, NO PROBLEM!!! WTF? How can it work on production but not locally.
The only thing I'm starting to think is:
a) I've missed a setting somewhere in CF or
b) I'm running Apache as compared to IIS or
c) I'm running SQL 2008 and CF 9 which will no doubt be different to the production host server.
Should B or C be causing THAT type of problem??
Thanks,
Matt

I'm not sure what code apart from the above is going to show you what you could possibly need to solve this, but here goes. The following is only snippets of the code, but they are the relavant snippets. Other stored procs work. The cfdump for getFeaturedWineries_qry shows 'usp_getFeaturedWineries'. I know its there because I've been unable to run "EXEC usp_getFeaturedWineries" after copying it straight out of the code. As previously stated, there are other stored procs which are running fine.
datasets.cfc
    <cffunction name="storedProcedure">
        <cfargument name="storedProcedure" required="Yes" type="string">
        <cfstoredproc procedure = "#ARGUMENTS.storedProcedure#"
                      datasource = "#REQUEST.DSN_NAME#"
                      username   = "#REQUEST.DSN_USER#"
                      password   = "#REQUEST.DSN_PASS#"
                      returncode = "Yes">
            <cfprocresult name="storedProcedure" resultset="1">
        </cfstoredproc>
        <cfreturn storedProcedure>
    </cffunction>
application.cfm
    
    <cfset DSN_NAME = "boutiqueWineriesTest">
    <cfset DSN_USER = "coldfusion">
    <cfset DSN_PASS = "coldfusion">
index.cfm
<cfobject component="#COMP_REF#.datasets" name="datasets">
<cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
    <cfinvokeargument name="storedProcedure" value="usp_getFeaturedWineries">
</cfinvoke>
<cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
displayFeaturedWineries.cfm
         <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
Attribute validation error for tag cfloop.
The value of the attribute query, which is currently getFeaturedWineries_qry, is invalid.                                                                                  The error occurred in C:\apps\iishome\includes\displayFeaturedWineries.cfm: line 33
Called from C:\apps\iishome\index.cfm: line 399
Called from C:\apps\iishome\index.cfm: line 79
Called from C:\apps\iishome\index.cfm: line 1
31 :      <tr>
32 :           <td width="626" colspan="3" class="productCenter_bg2">
33 :          <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
34 :              <div class="productCennews">
35 :                  <table border="0" cellspacing="0" cellpadding="0">

Validation error in JSF

Hi,
In my sample project the UI is powered by JSF, overall application architecture is J2EE.
In a scenario,we have a page where we toggle between radio buttons and page reloads everytime we toggle, with different forms.
In specific we have three radion buttons namely x ,y and z.
When the default page loads, x is selected and when i shift my selection to y the page reloads with different forms and no error is seen.
Next when i select z page reloads with different forms but error is displayed on the top of the page as below
"Validation error:Value is not valid."
Once the error is dispalyed on the page the error continues to remain eventhough we revert back the radio selection.
In the above case jsp calls the js and the snippet of the same is as below
JSP snippet:
<TD><h:selectOneRadio styleClass="selectOneRadio" id="radio1"
value="#{sessionScope.sameJam}"
onclick=return jump_onclick(this,event);>
<f:select itemValue="x"
itemLabel="#{labels.label_x}" />
<f:select itemValue="y"
itemLabel="#{labels.label_y}" />
<f:select itemValue="z"
itemLabel="#{labels.label_z}" />
</h:selectOneRadio></TD>
JS snippet:
function jump_onclick(thisObj,thisEvent){
thisObj.form.submit();
Java code:
protected HtmlSelectOneRadio getRadio1() {
if (radio1 == null) {
radio1 = (HtmlSelectOneRadio) findComponentInRoot("radio1");
return radio1;
Thanks in advance.

Re-wrote the below code in jsp
<h:form rendered="#{sS.selectedItem =='x'}" styleClass="selectOneRadio" >
<h:selectOneRadio rendered="#{sS.selectedItem =='x'}" >
<f:selectItem itemValue="x" itemLabel="labelx" />
<f:selectItem itemValue="y" itemLabel="labely" />
<f:selectItem itemValue="z" itemLabel="labelz"/>
</h:selectOneRadio>
</h:form>
<h:form rendered="#{sS.selectedItem =='y'}" styleClass="selectOneRadio" >
<h:selectOneRadio rendered="#{sS.selectedItem =='y'}" >
<f:selectItem itemValue="x" itemLabel="labelx" />
<f:selectItem itemValue="y" itemLabel="labely" />
<f:selectItem itemValue="z" itemLabel="labelz"/>
</h:selectOneRadio>
</h:form>
<h:form rendered="#{sS.selectedItem =='z'}" styleClass="selectOneRadio" >
<h:selectOneRadio rendered="#{sS.selectedItem =='z'}" >
<f:selectItem itemValue="x" itemLabel="labelx" />
<f:selectItem itemValue="y" itemLabel="labely" />
<f:selectItem itemValue="z" itemLabel="labelz"/>
</h:selectOneRadio>
<h:commandButton value="submit" action="#{sS.action}" />
</h:form>Below is my java code in SS class:
package mypackage;
public class SS {
    private String selectedItem;
public SS(){
String selectedItem = "x";
    public void action() {
        System.out.println("Selected item: " + selectedItem);
    public String getSelectedItem() {
        return selectedItem;
    public void setSelectedItem(String selectedItem) {
        this.selectedItem = selectedItem;
}Result is:
Instead of getting 3 radio buttons, i get a submit button my page.
Please correct me if I am wrong somewhere.

Validation error message in JSF 1.2

I am testing my Web application inside Tomcat 6.0.2 and using JSF 1.2. I was surprised to see that validation error messages do not only display the custom error message, but also the id tag and a "Validation Error: " text. For instance, if an input text component has the required property set to true and the user does not fill in value, the following error message will be displayed on page submiision: "hello:test: Validation Error: Value is required." instead of just "Value is required.". I am wondering if there is a way to silence the id tag and the "Validation Error: " text. hello:test id tag reflects the fact that the form has an id of "hello" and the input text component an id equal to "test".

Hello
I'm quite new to this technology. Would like to know how can we replace the 'annoying component id' with label while generationg validation/conversion error message.
E.g:
'for:compID' some error message
must be formated as
'compLabel' some error message
I happened to know that this feature is supported in JSF 1.2 impl. But didn't work for me with Sun RI.Can any body give me some sample code snippet for the same
Thanks
Jobinesh

Validation error in Tag Library at deploy time

I am trying to deploy a JSF2 app to NW CE 7.1 EHP1. This application deploy's fine to Tomcat. When I deploy to SAP it gives an error: Error in parsing [META-INF/primefaces-i.tld] TLD file in the following [D:\usr\sap\NCX\J00\j2ee\cluster\apps\com.sap\IDMear\servlet_jsp\IDM\root\WEB-INF\lib\primefaces-1.0.0.jar] JAR file.
[EXCEPTION]
com.sap.engine.lib.xml.parser.NestedSAXParseException: Fatal Error: org.xml.sax.SAXParseException: Validation error : line: 13; col: 16; :description : Element is not allowed.(:main:, row=13, col=17) -> org.xml.sax.SAXParseException: Validation error : line: 13; col: 16; :description : Element is not allowed.
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:140)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:174)
at com.sap.engine.lib.processor.SchemaProcessor.parse(SchemaProcessor.java:197)
at com.sap.engine.services.servlets_jsp.server.deploy.descriptor.TagLibDescriptor.loadDescriptorFromStream(TagLibDescriptor.java:90)
From looking at the TLD XSD for JEE 5, the Description field should be allowed. Do you know why it is not comparing the TLD against the correct schema or if there is another explanation?
This is a 3rd party faces component library. Here is where it fails:
<?xml version="1.0" encoding="UTF-8"?>
<taglib xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-jsptaglibrary_2_1.xsd" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="2.1">
     <tlib-version>1.2</tlib-version>
     <short-name>i</short-name>
     <uri>http://primefaces.prime.com.tr/touch</uri>
     <tag>
          <name>application</name>
          <tag-class>org.primefaces.touch.component.application.ApplicationTag</tag-class>
          <body-content>JSP</body-content>
          <attribute>
               <name>id</name>
               <required>false</required>
               <description><![CDATA[Id of the component]]></description>               <rtexprvalue>false</rtexprvalue>
          </attribute>
Any suggestions would be appreciated.

It looks like the 3rd party tld did not have the description in the correct order. It has been corrected in a new build.

Application Validation Error

Similar Messages

Maybe you are looking for