Application Visibility And Control Bittorrent

Hello,
I can use the Application Visibility And Control does not block the traffic from Bittorrent? Or have I misunderstood?
However, I have on my WLC 2504 that configures goes Bittorrent still.
Regards

Here is the protocol list supported in NBAR2
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6558/ps6616/product_bulletin_c25-627831.html
I can see "bittorrent", "encrypted-bittorrent", "bittorrent-networking" as recognised protocol in the list, but nothing for utorrent.
From WLC code 7.5 onwards you can update these protocol packs on your controller (see below for more detail)
http://www.cisco.com/en/US/docs/wireless/controller/technotes/7.5/AVC_dg7point5.html
Protocol pack 4.1.1 is the latest for 7.5 code. Here is the more information about it.
http://www.cisco.com/en/US/docs/wireless/controller/nbar2_prot_pack/4.1.1/b_nbar2_prot_pack_411.html
Latest protocol pack (pp-AIR-7.6-13-6.3.0.pack) is available for 7.6 code version if you would like to test it out.

Similar Messages

Cisco ASA5545-X CX Application Visibility and Control and Web Security Essentials

Installed Cisco Prime Security Manager 9.3 and recently purchased lic for web security essentials but cannot find good documentation for how to configure (Blocking categories, white listing sites, etc).

You can start with the User-Guide:
http://www.cisco.com/c/en/us/td/docs/security/asacx/9-3/user/guide/b_User_Guide_for_ASA_CX_and_PRSM_9_3/prsm-ug-cx-access.html

Cisco Appliaction Visibility and Control (AVC)

Got to know that AVC currently recognizes thousands of applications, including voice/video, email, file sharing, gaming, and peer-to-peer (P2P)applications.
But does anyone have the specific application list especially voice/video.
thanks

Hi Chuan,
Here is a link that lists all of the applicaitons in the NBAR2 library.
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6553/90364_product_bulletin_c25_627831.pdf

Coded UI : Window '' is blocking the control 2015. Please move the window '' or make the control 2015 visible and retry the action. Additional Details:

Hi ,
I'm trying to do a test automation using codedUI. This is a Windows application based on WPF.
I recorded the events and when playback I get a error.
There are two datetime pickers in the same form and when doing a playback one is picking up the date correctly where as the other datetimepicker is throwing the error as below.
Window '' is blocking the control 2015. Please move the window '' or make the control 2015 visible and retry the action. I tried even manually selecting some offset points but still the calendarfield shows empty.
Thanks,
Jayashree

Hi Jayashree,
Thank you for posting in the MSDN forum.
>> Window '' is blocking the control 2015. Please move the window '' or make the control 2015 visible and retry the action.
Please debug it with steps in this blog:
http://blogs.msdn.com/b/visualstudioalm/archive/2012/03/04/handling-playback-failures-in-coded-ui-test-due-to-stale-ui-controls.aspx
Please make sure that the target control is well truly visible on the screen, and then troubleshoot action you need to take is to check if the search has actually hit the correct target element. You can make use
of the
DrawHighlight method in your test code to validate this.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, Kedar

Hi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar

BEA / Wily: Financial Webinar - Achieving Availability, Performance and Control of Java Applications in Financial Services

Event Date: October 1, 2002 at 11:00 AM Pacific (US), 02:00 PM Eastern (US)
To register: http://regsvc.placeware.com/?wily-bea1001
Title: Achieving Availability, Performance and Control of Java Applications
in Financial Services
Abstract:
In today's competitive environment, financial institutions must focus on
three key business goals:
a.. Creating a customer-centric enterprise to maximize value to customers
and increase share of wallet
b.. Improving transactional efficiency for rapid delivery of the right
products, services and information to customers and to employees
c.. Accelerating the decision making process to mitigate risk and improve
returns.
BEA and Wily Technology have helped a number of financial services firms
meet these objectives by delivering high-performance business solutions that
meet rigorous demands for performance, reliability and scalability.
On October 1, 2002, Wily Technology and BEA will present a joint Web seminar
titled "Achieving Availability, Performance and Control of Java Applications
in Financial Services" with Eric Gudgion, Principal System Architect,
Technical Solutions Group at BEA and Chris Farrell, Director of Technical
Marketing at Wily. This Webinar will showcase the many advantages that the
WebLogic® Enterprise PlatformT and Wily's Introscope® offer financial
services firms.
Attendees will learn how WebLogic Server, BEA's unified, simplified and
extensible solution, provides a robust platform for the development and
deployment of enterprise Java applications. Some examples of what financial
institutions can achieve with BEA include Multi-channel Services Delivery,
Straight-Through Processing, Wealth Management and Cash Management.
Wily Technology will highlight Introscope's ability to manage financial
services Java applications by pinpointing component-level performance issues
in real-time, whether in the application, application server or
Java-connected back-end systems. Wily's suite of Java application management
solutions offers a comprehensive platform for achieving 24x7 application
availability, enhanced performance and better control of IT resources.

First of all you should check out which products are supported on 64bit :- http://www.oracle.com/technology/products/bi/hyperion-supported-platforms.html
If you are planning on using windows 64bit EAS then you will have to manually deploy the web application, it cannot be automatically deployed.
Cheers
John
http://john-goodwin.blogspot.com/

SendRedirect and controlling the Application

I have an MVC application which consists of a controller servlet and
a number of JSPs.
The controlling servlet uses a sendRedirect to direct control to a
further place - this place being an ORACLE reports server which makes a call to a report and displays it as PDF - when it does this it takes
over the whole window and hence when I come out of the report I have to close down the window and hence the JSP that caused the original
sendRedirect to be made.
What I would like to happen is the following:
1.) Initiating JSP displays records to be reported on
2.) User selects the row to be reported (by clicking a check box) on -
this record is then sent back to the controlling servlet for the
sendRedirect to be made in order to initiate the report.
3.) Report runs and produces the output.
4.) User closes down the report and control is then passed back to
the initiating JSP ready for the user to select the next record to
run the report for.
Whilst I can do the first 3 I cannot figure out how to do step 4.)
Any help much appreciated.
Chris

The immediately obvious solution would be to generate
the report in a new window, thus when the user closes
the reports, the initial JSP page is still active and
the user may select a new report to run.
Another idea... make the page that's generating the
report a framed page, leaving you an frame with the
option to close the reports window and return back to
the originating JSP (similar to how microsoft handles
navigating to/from external sites from Hotmail). When
the user clicks Close or Return, or whatever, the JSP
can then be loaded again.Thanks for this. How do I open a new window from a Servlet - I thought
that command was specific to JavaScript.
Do you mean forward the control/information to a JSP from which
I would do the redirect.
Thanks
Chris

Would like to monitor and control a labview application with a hand held device.

Would like to monitor and control a labview application with a hand held device.
Would like to use a palm or ipac on a local area network or communicate directly with the PC running windows.

LabVIEW doesn't run on a hand held device. But, check out these documents:
Is it Possible to Use Remote Front Panels to Control a LabVIEW VI Remotely Using my PDA?
"What OS is recommended for LabVIEW to run on a PDA?"

How to increment array that contains two clusters whose visibility is controlled by a visible property node and selected by a radio button.

I am trying to use a property node: visible in order to enable or disable one of two clusters. These clusters are in a larger cluster and this larger cluster is in an array. The two clusters are controlled by a radio button (one labeled transistor and the other diode). When diode is selected, the corresponding diode parameters cluster should be visible and when transistor is selected, the corresponding transistor parameters cluster should be visible. In the mean time, the cluster of the device that is not selected should not be visible. There are at least 45 elements in the array (but not more than 45). Data is entered into each cluster (diode or transistor data) for each element in the array via the increment/decrement. The problem is when you select the first radio button (transistor) and enter data, when you increment the array for a new device selection, since a visible property node was used on the cluster, a loop is created where a new cluster is trying to be shown, but the old cluster is also trying to be shown (because it is the one referenced by the property node. How do I get rid of this loop and still be able to increment the array and keep my data intact for future use? Attached is the vi
Attachments:
ChooseScan.vi ‏17 KB

You could try something like this. However, if you know how to use an xcontrol, that would be a better way to implement the above functionality so that these UI characteristics are not a part of your main VI. The problem with the above VI is that you're looping every 100 ms just to update your UI.
Also, try using the "disabled" property node, instead of the "visible" one. That way, the user will still see the options he has but they will be grayed out.
Message Edited by Sudhir Gopinath on 06-25-2007 04:45 PM
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor
Attachments:
ChooseScan_1.vi ‏19 KB

Another control is blocking the control. Please make the blocked control visible and retry the action

I am trying to click on a Hyperlink in div tag , but I keep getting this error message:
Another control is blocking the control. Please make the blocked control visible and retry the action.
What could it be? Nothing is blocking it at all.

Check your html to see whether any controls are inadvertantly floating over the top of your hyperlink.
I would also use firebug (F12 in ie or chrome) to highlight the boundaries of each control on your page so you can track it down easily.
If using chrome you can right click on the page and select Inspect element.
This should help you find the cause of the issue:)

How to start and control a WIN console application out of Labview ?

I have a windows console application, which requires user inputs (keystrokes) during the application run. Now I want to start and control this application out of labview (8.5). Has anyone a good idea, how this can be done ? The "System Exec.vi" seems to be unsuitable, because you can not pass any data to stdin during the run of the application.

Well, of course I agree absolutely with JoeLabView that Cheap + Fast != (not equal) Good. My company is a manufacturer for medical devices. These are long-living (compared to consumer electronics) and therefore it is extremly important for us that my written code is manageable, reusable and stable. Thats the reason, why I spent time to think about the really best solution for my task here and I am very amused that we can share our knowledge here in this forum.
I also thinked about creating a DLL as suggested by smercurio. If I will solve my task in that way, I still have to remove the User Interactions and call the appropriate subfunctions directly. If a newer ART-Tool will be used in the future, this work must be repeated. It that maybe that the developer must go deeply into the coding of the tool. Nevertheless it is a possible way, of course.
Actually I thinked about a further solution I want to discuss with you. The .NET framework provides functions for redirection of standart input and output. Refer to the explanation of "ProcessStartInfo.RedirectStandardOutput Property" and "ProcessStartInfoRedirectStandardInput Property" within the .NET Framework Documentation, there are also some examples of how to use them. With this background knowledge, I think that it must be possible to write some kind of wrapper code, which starts the tool and redirects the input/output to labview. The code maybe implemented as a DLL which can then being embedded into LV, or as a separate executable file, whereby the communication between LV and the wrapper code may be done over TCP for example. What do you think about this attempt ?
@smercurio:
>> trying to use the ART-tool as it is for automated testing will cause you grief in the long run ....
Where exactly, did you have the problems? Did you have the problems across multiple art revisions ? What was your "main" problem ? Please let me know your experience, cause I do not want to run into similar problems.

How to view and control a VI remotely from a web browser

Hello,
I want to see and control a vi using a web browser.
I followed the steps recommended in help and I can see and control the front panel of my vi.
So far everything is OK.
First problem:
A button activates a simple window display a message (One Dialog button). The dialog box opens on the server computer but can not be seen in brouser and therefore can not be closed remotely.
The second problem:
Another button activates another window (vi) loaded dynamically. The VI is reentrant and is open with option 0xC0 ("Enable simultaneous calls on reentrant VIs" and "Prepare to call and forget"). By activating the button, it opens multiple instances of the VI properly and runs on the server computer, but their are not visible to the client computer.
I created, after the same algorithm, corresponding HTML file for the dynamically loaded VI and it is saved in the same place with the main program HTML file.
What to do as the client computer can operate main VI and adjacent windows from the browser?
Thanks,
Cristian
Solved!
Go to Solution.

Another option would be to use something like WebSockets and have your LabVIEW application communicate with a web-page you've designed/developed with Javascript. Then you can use things like floating windows/dialogues with jQuery. It's a lot of work though as you'll need to define your websockets API for talking to your application and then develop the web-page in HTML/CSS/JavaScript for your user interface.
Unfortunately, even browsers are moving away from pop-up windows (chrome and various addons tend to block popups and they don't play nice with mobile devices). You can have semi-dialogue-like pop-ups though with modal dialogues: https://jqueryui.com/dialog/#modal-message Note though that they are contained within the browser window.
My advice would be to think about creating a custom UI in LabVIEW that works with a single pane / panel (you can use tab controls!) and use that with remote front panels. Then decide if you want to invest the time/effort in a WebSockets/Web Services approach with your own browser-based UI. Note as well that remote front panels don't work in Chrome properly any more.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Detect Control-Plus and Control-Minus

Hi,
I want to detect keyboard events in a swing application, with the Control key and the '+' or '-' keys pressed (the ones from the keyboard, not from the numpad).
This is to provide similar behaviour than Firefox for increasing and decreasing the font size.
I have an English keyboard, in which + is with = key, to be pressed with shift, and - can be pressed directly, without shift.
I've tried many ways to achieve this behaviour, but have not succeeded yet.
Platform is Java SE 1.6.0_07 on Red Hat Enterprise Linux 4 with Gnome.
import static java.awt.event.InputEvent.*;
import static java.awt.event.KeyEvent.*;
import static javax.swing.KeyStroke.getKeyStroke;
// Within some method in some class...
KeyStroke ctrlPlus, ctrlMinus;
// Menu items seem correct, but none of the combinations work for me
ctrlPlus = getKeyStroke(Character.valueOf('+'), CTRL_DOWN_MASK); // menu item shows Ctrl-+
ctrlMinus = getKeyStroke(Character.valueOf('-'), CTRL_DOWN_MASK); // menu item shows Ctrl--
// Menu items seem a bit strange; Ctrl - works, but Ctrl + doesn't
ctrlPlus = getKeyStroke(VK_PLUS , CTRL_DOWN_MASK); // menu item shows Ctrl-Plus
ctrlMinus = getKeyStroke(VK_MINUS, CTRL_DOWN_MASK); // menu item shows Ctrl-Minus
// None of these combinations work
ctrlPlus = getKeyStroke("control +"); // menu item shows nothing
ctrlMinus = getKeyStroke("control -"); // menu item shows nothingIt seems I can get the desired behaviour with '+' and '-' of the numpad, but:
1. They are more weird than the normal '+' and '-' keys, which are the ones used by Firefox
2. The menu items show Ctrl-Numpad + and Ctrl-Numpad - as shortcuts, which are weird also
3. Not all keyboards have a numpad.
A solution would be very much appreciated... as well as rewarded with the dukes.

KeyStroke.getKeyStroke(KeyEvent.VK_EQUALS, KeyEvent.SHIFT_DOWN_MASK | KeyEvent.CTRL_DOWN_MASK)This works indeed with CTRL_DOWN_MASK alone (not tested with the other mask), thanks.
However, this solution has two drawbacks:
1. The accelerator string is shown as Ctrl-=, while I want Ctrl-+ to be shown
2. '+' key may not coincide with '=' in non-English keyboards (e.g. it doesn't coincide in Spanish keyboards)
I've found a solution that required a bit more work:
1. Create the actions with the keyStroke you want to be shown (in my case, Ctrl-- and Ctrl-+):
ctrlPlus = getKeyStroke("ctrl typed +"); // Ctrl-+ is shown
ctrlMinus = getKeyStroke("ctrl typed -"); // Ctrl-- is shown
Action actionPlus = new AbstractAction() { ... };
actionPlus.setAccelerator(ctrlPlus);
Action actionMinus = new AbstractAction() { ... };
actionMinus.setAccelerator(ctrlMinus);2. Bind the keys you actually want to the corresponding action:
JComponent window = ...; // root window
InputMap inputMap = window.getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
ActionMap actionMap = window.getActionMap();
Object actionMapKeyPlus = "ctrl+";
Object actionMapKeyMinus = "ctrl-";
inputMap.put(getKeyStroke(VK_EQUALS , CTRL_DOWN_MASK), actionMapKeyPlus); // + key in English keyboards
inputMap.put(getKeyStroke(VK_PLUS    , CTRL_DOWN_MASK), actionMapKeyPlus); // + key in non-English keyboards
inputMap.put(getKeyStroke(VK_ADD     , CTRL_DOWN_MASK), actionMapKeyPlus); // + key on the numpad
inputMap.put(getKeyStroke(VK_MINUS   , CTRL_DOWN_MASK), actionMapKeyMinus); // - key
inputMap.put(getKeyStroke(VK_SUBTRACT, CTRL_DOWN_MASK), actionMapKeyMinus); // - key on the numpad
actionMap.put(actionMapKeyPlus, actionPlus);
actionMap.put(actionMapKeyMinus, actionMinus);More complicated than expected, but at least works.
Thanks for the help.
God bless,
Jaime

Control parallel port (data and control lines)

I need to control the output on the parallel port (LPT1) - Both data and control lines. Once the data is written (Pins2-9), I then need to toggle the Sprocket signal (PIN1) - on the parallel port. The sprocket signal is also referred to as the Data Strobe Output.
The required method is as follows:
1. Lower the sprocket signal on PIN1
2. Send the data (Pins2-9) and wait
3. Raise the sprocket signal and wait.
4. Repeat.
I am looking for a method to control the data on LPT1 pins 2-9 and then be able to toggle PIN1 - Strobe signal - without the data falling from the other pins. What I have found is that whenever the state is changed on the strobe - the data that was written to Pin2-9 falls to zero. This will not work for my application - the strobe tells the hardware device that the data is ready. If it falls to zero when I toggle the strobe - that will not work.
Regards,
Guy

Hello Adam,
I am familiar with both references. If you look more closely at the library reference - it allows me to communicate using VISA across the parallel port pins 2-9. It does not permit direct communication to pin1 (the strobe signal) - property nodes don't allow the strobe to be refereced either (similar to control lines/signals for COM ports).
Worse, I have also located examples using OUT PORT that does enable pin1 to be toggled. The problem is, when those VIs are used, the data falls from the data pins when the strobe signal is written, even if its value is not changed. For example, if the strobe is already high, if another high value is passed, the data falls from the data lines. The other issue, when using VISA, as soon as the data is writen, the strobe signal automatically goes high even though I need a wait before setting the strobe high. This is in complete contradiction to the second article you referenced which clearly discusses writing data to pins2-9 then taking the strobe high to indicate to the printer that new data is available. It must be possible since this is the typical handshake.
I am still looking for a more complete answer/solution.
Regards,
Guy

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests

Hi,
We are using SCCM 2012 sp1 cu5 with one primary in the datacenter and a number of local DP's which are presently servicing 200 users, but will rise to 12,000. The Application Catalogue is installed on the primary server.
Once a day we get the above error and the message id is 8101, and sometimes a user will have to click on install twice, with the first one failing (the ones that fail are normally with dependencies which are quite large in size around 250MB)
I'm just wondering if this is something I should be concerned about, especially since we will be ramping up user numbers in the next few weeks, and if it could be down to volume of traffic, although the apps are downloaded to the users local DP.
Also, does this design look suitable to service this amount of users, or should I have local application catalogues? The WAN bandwith between the datacenter and the user sites has recently been upgraded and is pretty fast.
Thanks
Jaz

Hi Torsten,
Message ID is in the SMS_AWEBSVC_CONTROL_MANAGER status log and equates to "Application Web Service Manager detected AWEBSVC is not responding to HTTP requests. The http error is 12002.
Then, about 1 hr later in the same monitoring log I get Message ID 8102 "Application Web Service Control Manger detected AWEBSVC is responding to HTTP requests.
At the moment it isn't doing this very often, just once a day at different times normally, but it has also logged this a couple of times as well. I guess it may correspond to multiple users accessing the web portal at multiple times, but wondered if
anyone else has seen this behaviour and how it was fixed.
Thanks
Jaz

Application Visibility And Control Bittorrent

Similar Messages

Maybe you are looking for