Application with questionaire

Hi,
In order to let an internal applicant the opportunity to add free text when submitting an application, I decided to use a questionaire.
I created a questionaire for applicants and attached it to a requisition (in requirements tab of requisition's characteristics there is an option to add questionnaires).
Unfortunately, when an applicant submit an application for a requirement, the questionaire doesn't appear on the application page.
Do you know how to add (by customization, of course) the questionaire to the application page?
Thanks,
Tal

Hi Tal,
Also make sure the screen for the questionnaires is configured to be used in the application wizard. If you assign a questionnaire to a requisition and the questionnaire screen is missing from the wizard, you will get some strange error messages.
Regards,
Luk

Similar Messages

How to start a application with a login window?

hi there
does anyone have any idea on how to start an application with a login window? a login window is the first frame or window to be displayed when an application starts running. and only correct login id and password have been entered the real application will start. any sample out there? thank you.

You can start a new thread by making a thread object and passing it an implementation of a runnable object. Runnable has just one method, public void run(), this is was gets executed in a second thread. perhaps the code you would use would look something like this.
<code>
// set up thread for login window
new Thread(new Runnable() {
public void run() {
// construct your login window here
// when you are done processing the
// password....
if(goodPassword) {
authorized = true; // a global variable
notifyAll(); // don't forget this
else {
System.exit(42);
}).start();
// control does not stop this code gets executed while
// the above thread is running.
// Set up main program here. This is done in the
// backround.
while(!authorized) {
synchronized(this)
{ wait(50); }
// now when the user logs in this frame pops
// up real quick.
myFrame.setVisible(true);
</code>
Hope you can figure it out.. good luck :)

How to launch an application with elevated administrator account privilege from windows service even if the account has not yet logon

Here is the case:
OS environment: Windows 7
There are two user accounts in my system, standard user "S" and administrator account "A", and there is a windows service running with "Local System" privilege.
Now i logged-in with account "S", and i want to launch an application with elevated administrator account "A" from that service program, so here is the code snippet:
int LaunchAppWithElevatedPrivilege (
LPTSTR lpszUsername, // client to log on
LPTSTR lpszDomain, // domain of client's account
LPTSTR lpszPassword, // client's password
LPTSTR lpCommandLine // command line to execute e.g. L"C:\\windows\\regedit.exe"
DWORD dwExitCode = 0;
HANDLE hToken = NULL;
HANDLE hFullToken = NULL;
HANDLE hPrimaryFullToken = NULL;
HANDLE lsa = NULL;
BOOL bResult = FALSE;
LUID luid;
MSV1_0_INTERACTIVE_PROFILE* profile = NULL;
DWORD err;
PTOKEN_GROUPS LocalGroups = NULL;
DWORD dwLength = 0;
DWORD dwSessionId = 0;
LPVOID pEnv = NULL;
DWORD dwCreationFlags = 0;
PROCESS_INFORMATION pi = {0};
STARTUPINFO si = {0};
__try
if (!LogonUser( lpszUsername,
lpszDomain,
lpszPassword,
LOGON32_LOGON_INTERACTIVE,
LOGON32_PROVIDER_DEFAULT,
&hToken))
LOG_FAILED(L"GetTokenInformation failed!");
__leave;
if( !GetTokenInformation(hToken, (TOKEN_INFORMATION_CLASS)19, (VOID*)&hFullToken,
sizeof(HANDLE), &dwLength))
LOG_FAILED(L"GetTokenInformation failed!");
__leave;
if(!DuplicateTokenEx(hFullToken, MAXIMUM_ALLOWED, NULL,
SecurityIdentification, TokenPrimary, &hPrimaryFullToken))
LOG_FAILED(L"DuplicateTokenEx failed!");
__leave;
DWORD dwSessionId = 0;
WTS_SESSION_INFO* sessionInfo = NULL;
DWORD ndSessionInfoCount;
bResult = WTSEnumerateSessions(WTS_CURRENT_SERVER_HANDLE, 0, 1, &sessionInfo, &ndSessionInfoCount);
if (!bResult)
dwSessionId = WTSGetActiveConsoleSessionId();
else
for(unsigned int i=0; i<ndSessionInfoCount; i++)
if( sessionInfo[i].State == WTSActive )
dwSessionId = sessionInfo[i].SessionId;
if(0 == dwSessionId)
LOG_FAILED(L"Get active session id failed!");
__leave;
if(!SetTokenInformation(hPrimaryFullToken, TokenSessionId, &dwSessionId, sizeof(DWORD)))
LOG_FAILED(L"SetTokenInformation failed!");
__leave;
if(CreateEnvironmentBlock(&pEnv, hPrimaryFullToken, FALSE))
dwCreationFlags |= CREATE_UNICODE_ENVIRONMENT;
else
pEnv=NULL;
if (! ImpersonateLoggedOnUser(hPrimaryFullToken) )
LOG_FAILED(L"ImpersonateLoggedOnUser failed!");
__leave;
si.cb= sizeof(STARTUPINFO);
si.lpDesktop = L"winsta0\\default";
bResult = CreateProcessAsUser(
hPrimaryFullToken, // client's access token
NULL, // file to execute
lpCommandLine, // command line
NULL, // pointer to process SECURITY_ATTRIBUTES
NULL, // pointer to thread SECURITY_ATTRIBUTES
FALSE, // handles are not inheritable
dwCreationFlags, // creation flags
pEnv, // pointer to new environment block
NULL, // name of current directory
&si, // pointer to STARTUPINFO structure
&pi // receives information about new process
RevertToSelf();
if (bResult && pi.hProcess != INVALID_HANDLE_VALUE)
WaitForSingleObject(pi.hProcess, INFINITE);
GetExitCodeProcess(pi.hProcess, &dwExitCode);
else
LOG_FAILED(L"CreateProcessAsUser failed!");
__finally
if (pi.hProcess != INVALID_HANDLE_VALUE)
CloseHandle(pi.hProcess);
if (pi.hThread != INVALID_HANDLE_VALUE)
CloseHandle(pi.hThread);
if(LocalGroups)
LocalFree(LocalGroups);
if(pEnv)
DestroyEnvironmentBlock(pEnv);
if(hToken)
CloseHandle(hToken);
if(hFullToken)
CloseHandle(hFullToken);
if(hPrimaryFullToken)
CloseHandle(hPrimaryFullToken);
return dwExitCode;
I passed in username and password of account "A" to method "LaunchAppWithElevatedPrivilege", and also the application i want to launch, e.g. "C:\windows\regedit.exe", but when i run the service program, i found it do launch
"regedit.exe" with elevated account "A", but the content of regedit.exe is pure back. screenshot as below:
Can anyone help me on this?

You code is not dealing with the DACL access to Winsta0\Default. Only the LocalSystem account will have full access and the interactively logged on user which is why regedit is not displaying properly. You'll need to grant access to your user.
You also need to deal with UAC since that code is going to give you a non-elevated token via LogonUser(). You need to get the full token via a call to GetTokenInformation() + TokenLinkedToken.
thanks
Frank K [MSFT]
Follow us on Twitter, www.twitter.com/WindowsSDK.

Apex Application With Oralce SSO (inbuilt) application integration

Hi,
Installed oracle 11g, configured Application Express Release 3.0.
I developed application in APEX.
Now I want to authenticate my application with Oracle SSO login.
Please help me on this.
Thanks in advance.
Thanks,
Surya

Hello Surya,
If you follow the instructions here you should be able to connect to your SSO.
http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html
Peter

Register application with SSO

Hi all
I have a APEX install which I have succesfully registered with SSO as a partner application (I have registered APEX/HTMLDB itself). On this machine we host a number of applications which can be accessed as http://myserver.mydomain.com/pls/htmldb/f?p=APP_NAME1 (and so on to APP_NAME_n).
The business owner of one of these applications wants to have an application-specific URL instead of the generic type URL (eg, http://my-new-app.mydomain.com/....), and to keep the new alias in the browser URL. However, I am sure that this will require me to register the application with SSO as the SSO server won't recognise the new URL.
I have searched the forum and not found any reference to having the entire HTMLDB engine registered as a partner app, and registering individual apps with SSO at the same time. Perhaps, this is so trivial and straightfoward that no-one has come across any problems with this. But I wonder if there are any "gotchas" in having this kind of set up before I actually start on it.
regards
Gerard

Gerard - That should work as that was the intended purpose of having the two "flavors" of SSO partner app integration - so that a workspace schema could have a local copy of the SSO SDK and could use it independently of the Application Express installation's copy. Do let us know how it goes, especially if it works.
Scott

Registering a Partner application with Oracle SSO 10gR2

Hi Everybody
I'd like to ask a question around registering a partner application with Oracle SSO.
I have entered my home_url, logout_url and cancel_url e.g. home_url is https://vevopuitest1.co.uk/vevo_test1 and so on for the other fields.
When I save the details some information is automatically created e.g. Site Id, Site Token etc.
The bit that I am particularly interested in are the fields Single Sign-On URL and Single Sign-Off URL.
For my purposes these fields are respectively: https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_login and https://cwassotest1.co.uk/pls/orasso/orasso.wwsso_app_admin.ls_logout
My questions are:
1. Where do these values come from?
2. Can I view them anywhere, say, in Oracle Directory Manager or using ldif queries?
I would like to be able to verify these values.
Many Thanks
Andy

I'm afraid this won't answer your question completely, but AFAIK in principle it does not matter on which machine SSO is running, as long as it passes the user id and credentials properly through the HTTP Header. Even more: in practice it is very common to have SSO running on a different machine than where your app runs.
So what I would do is find out how to use ADF Faces with SSO. Perhaps someone else can provide pointers on that.
Jan Kettenis

APEX 3.2 Associating application with SSO login page.

Hi
My requirement is to replace my login page of APEX3.2 application with an SSO login page. Also, the application uses some tables with some history columns like: "Last Updated by", "Created by", "Last Update Time", etc... While create/edit of any table, I want these columns to be automatically populated according to the credentials used in SSO login page to that application. Please help.
The link given on this forum (http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html) for the purpose seems to be obsolete i.e. for previous versions of APEX.
Thanks
Bhavesh

Bhavesh,
That how-to explains all the steps you need to set up SSO with Application Express.
As far as the audit columns, just create triggers on your tables. Referenced v('APP_USER') to get the authenticated username.
Scott

Single Sign On and Application with Web Services

My Application Server is set as partner application for SSO so for example this address: http://myserver:80 is SSO enabled.
I have two ADF applications on it with jspx pages and the ADF security is enabled on them. SSO works for these applications (for jspx files).
I added a new application with a web service and deployed this new application. It is on the same application server as those two applications and its security provider in identity management, SSO enabled. Its address is something like:
http://myserver:80/newWebService-Project1-context-root/MyWebService1SoapHttpPort
So I expect to be unable to test web service, but I can and I am not prompted for user name and password.
Regards
Farbod

Thank you.
Yes I had cleared the cache and in these cases I always use a new browser also.
I deployed a third application without declarative security options (ADF application, no security settings) and this application also didn't ask me for user information though it was under SSO.
Regards
Farbod

Always used 1 main account. Started using individual user accounts. So how do I use software or applications with a lot of data like Quicken under my own user account?

I recently upgraded our family's mac to OS X. I thought this was the perfect time to create and use "user accounts". We had always used 1 main account. So how do I use software or applications with a lot of data like Quicken under my own user account? I wanted to be able to manage my own itunes library, iphone apps, messages. But I still really need to use the Stuff I have in Quicken essentials. I don't want to have to restart all my work done in Quicken already.

I haven't used Quicken in a while, but most applications store your files in your Documents folder. Is that where your Quicken data file is? What you do next depends on how many family members need to get at that data.
If multiple family members need to use the Quicken data file, try moving it to the Documents folder in the Shared account. That is an account that all accounts can see. It's at the same level as the other accounts. In other words, Shared is one level up from your Home account, or Hard Drive/Users/Shared.
If you're the only one allowed to see that Quicken data, move the Quicken data file from the old main account to your account, and don't leave a copy behind. You can use the Shared folder as a way station for the transfer since you won't be able to see both accounts' Documents folders at the same time (because you're not allowed to peek into other people's accounts). Or you can use another disk or server for the transfer, as long as you can get to it when logged into either account.

Problem with tutorial; "Build a Web Application with JDeveloper 11g Using "

I've got a rather new installation of Vista Business x64 on my developer rig, and last week I installed the new JDeveloper 11g version. The installation was all-inclusive, no customization on my end.
In addition I've got a test installation of an Oracle DB 11gR1 on an available server here.
To familiarize myself with the new JDeveloper I decided to spend some time with the JDeveloper 11g tutorials found here: http://www.oracle.com/technology/obe/obe11jdev/11/index.html.
I've started twice on the second tutorial, "Build a Web Application with JDeveloper 11g Using EJB, JPA, and JavaServer Faces", and find myself repeatedly stuck at step 19 in section "Creating the Data Model and Testing it".
It seems impossible to deploy the application to the default application server. The server starts fine on its own, I can access it via the admin console on port 7001 and it looks good. However, when I try to run the HRFacadeBean funny things are happening, symptomized by the following error messages seen in the IDE log-area:
The "Messages" pane displays:
"Compiling...
Context: MakeProjectAndDependenciesCommand application=HR_EJB_JPA_App.jws project=EJBModel.jpr
C:\Oracle\Middleware\jdk160_05\jre\bin\java.exe -jar C:\Oracle\Middleware\jdeveloper\jdev\lib\ojc.jar -g -warn -nowarn:320 -nowarn:372 -nowarn:412 -nowarn:413 -nowarn:415 -nowarn:486 -nowarn:487 -nowarn:489 -nowarn:556 -nowarn:558 -nowarn:560 -nowarn:561 -nowarn:705 -Xlint:-fallthrough -Xlint:-serial -Xlint:-unchecked -source 1.6 -target 1.6 -noquiet -encoding Cp1252 -d C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\classes -namereferences -make C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\classes\EJBModel.cdi -classpath C:\Oracle\Middleware\jdk160_05\jre\lib\resources.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\rt.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\jsse.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\jce.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\charsets.jar;C:\JDeveloper\mywork\HR_EJB_JPA_App\.adf;C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\classes;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\toplink.jar;C:\Oracle\Middleware\modules\com.bea.core.antlr.runtime_2.7.7.jar;C:\Oracle\Middleware\modules\javax.persistence_1.0.0.0_1-0.jar;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\eclipselink.jar;C:\Oracle\Middleware\jdeveloper\modules\oracle.xdk_11.1.1\xmlparserv2.jar;C:\Oracle\Middleware\jdeveloper\modules\oracle.xdk_11.1.1\xml.jar;C:\Oracle\Middleware\modules\javax.jsf_1.2.0.0.jar;C:\Oracle\Middleware\modules\javax.ejb_3.0.1.jar;C:\Oracle\Middleware\modules\javax.enterprise.deploy_1.2.jar;C:\Oracle\Middleware\modules\javax.interceptor_1.0.jar;C:\Oracle\Middleware\modules\javax.jms_1.1.1.jar;C:\Oracle\Middleware\modules\javax.jsp_1.1.0.0_2-1.jar;C:\Oracle\Middleware\modules\javax.jws_2.0.jar;C:\Oracle\Middleware\modules\javax.activation_1.1.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.mail_1.1.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.xml.soap_1.3.1.0.jar;C:\Oracle\Middleware\modules\javax.xml.rpc_1.2.1.jar;C:\Oracle\Middleware\modules\javax.xml.ws_2.1.1.jar;C:\Oracle\Middleware\modules\javax.management.j2ee_1.0.jar;C:\Oracle\Middleware\modules\javax.resource_1.5.1.jar;C:\Oracle\Middleware\modules\javax.servlet_1.0.0.0_2-5.jar;C:\Oracle\Middleware\modules\javax.transaction_1.0.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.xml.stream_1.1.1.0.jar;C:\Oracle\Middleware\modules\javax.security.jacc_1.0.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.xml.registry_1.0.0.0_1-0.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar;C:\Oracle\Middleware\wlserver_10.3\common\lib -sourcepath C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src;C:\Oracle\Middleware\jdk160_05\src.zip;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\toplink-src.zip;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\eclipselink-src.zip C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\Dept.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\Emp.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacadeLocal.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacadeClient.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacade.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacadeBean.java
[11:45:27 PM] Successful compilation: 0 errors, 0 warnings.
[Application HR_EJB_JPA_App is bound to Server Instance DefaultServer]
[Starting Server Instance DefaultServer]
#### Server Instance DefaultServer could not be started: Server Instance was terminated.
The "Running: DefaultServer" displays:
"C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
[Server Instance DefaultServer is shutting down. All applications currently running will be terminated and undeployed.]
Process exited.
C:\Oracle\Middleware\user_projects\domains\base_domain\bin\stopWebLogic.cmd
Stopping Weblogic Server...
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://localhost:7101 with userid weblogic ...
This Exception occurred at Wed Oct 29 23:47:40 CET 2008.
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7101: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused: connect; No available router to destination]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
     at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:365)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:512)
     at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:565)
     at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:305)
     at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
     at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:60)
     at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:125)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
     at org.python.core.PyMethod.__call__(PyMethod.java:96)
     at org.python.core.PyObject.__call__(PyObject.java:248)
     at org.python.core.PyObject.invoke(PyObject.java:2016)
     at org.python.pycode._pyx4.connect$1(<iostream>:16)
     at org.python.pycode._pyx4.call_function(<iostream>)
     at org.python.core.PyTableCode.call(PyTableCode.java:208)
     at org.python.core.PyTableCode.call(PyTableCode.java:404)
     at org.python.core.PyFunction.__call__(PyFunction.java:184)
     at org.python.pycode._pyx16.f$0(C:\Oracle\Middleware\user_projects\domains\base_domain\shutdown.py:1)
     at org.python.pycode._pyx16.call_function(C:\Oracle\Middleware\user_projects\domains\base_domain\shutdown.py)
     at org.python.core.PyTableCode.call(PyTableCode.java:208)
     at org.python.core.PyCode.call(PyCode.java:14)
     at org.python.core.Py.runCode(Py.java:1135)
     at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
     at weblogic.management.scripting.WLST.main(WLST.java:129)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.WLST.main(WLST.java:29)
Caused by: java.net.ConnectException: t3://localhost:7101: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused: connect; No available router to destination
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:203)
     at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
     at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:344)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:339)
     ... 38 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused: connect; No available router to destination
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:315)
     at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:251)
     at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:194)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:225)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteCluster(RJVMFinder.java:303)
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:193)
     ... 43 more
Problem invoking WLST - Traceback (innermost last):
File "C:\Oracle\Middleware\user_projects\domains\base_domain\shutdown.py", line 1, in ?
File "<iostream>", line 22, in connect
WLSTException: Error occured while performing connect : Error getting the initial context. There is no server running at t3://localhost:7101 Use dumpStack() to view the full stacktrace
Done
I'm not that familiar with these things but it seems to me that there is an issue with port numbers here. The application seems to expect a app.server service at port 7101, but does'nt find one.
Any suggestions on how to fix this problem would be appreciated?
LA$$E

Jupp,
It fails in a similar way.
What I did was; create a simle 'Hello World' html file, saving it with the jsp extension. In Jdev11g i made a new application and an emtpy project, then loaded the jsp file and made it the default run-target. This compiles nicely.
When running the project it first attempts to start the WebLogicServer (WLS). After a few minutes it is started as seen in the "Running: DefaultServer" pane:
C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\Middleware\jdeveloper\modules\features\adf.share_11.1.1.jar;;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oracle_client\product\11.1.0\client_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -DproxySet=false -Djbo.34010=false -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Doracle.home=C:\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Xms1024m -Xmx1024m -XX:MaxPermSize=256m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<30.okt.2008 kl 19.20 CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<30.okt.2008 kl 19.20 CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30.okt.2008 kl 19.20 CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<30.okt.2008 kl 19.20 CET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<30.okt.2008 kl 19.20 CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<30.okt.2008 kl 19.20 CET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<30.okt.2008 kl 19.20 CET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30.okt.2008 kl 19.20 CET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30.okt.2008 kl 19.20 CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<30.okt.2008 kl 19.20 CET> <Warning> <Server> <BEA-002611> <Hostname "Kromp.lan", maps to multiple IP addresses: 10.0.0.8, 127.0.0.1>
<30.okt.2008 kl 19.20 CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.0.0.8:7001 for protocols iiop, t3, ldap, snmp, http.>
<30.okt.2008 kl 19.20 CET> <Warning> <Server> <BEA-002611> <Hostname "127.0.0.1", maps to multiple IP addresses: 10.0.0.8, 127.0.0.1>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Development Mode>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 121552 ms.
DefaultServer started.
In the "Messages" pane, however, things are not looking so good:
Context: MakeProjectAndDependenciesCommand application=TestAppJsp.jws project=TestProjJsp.jpr
[7:20:49 PM] Successful compilation: 0 errors, 0 warnings.
[Application TestAppJsp is bound to Server Instance DefaultServer]
[Starting Server Instance DefaultServer]
#### Server Instance DefaultServer could not be started: Server Instance was terminated.
But, of course, the server is actually running as I can access it via its Admin Console.
So, I try to run the project again, and this time the following is shown in the "Messages" pane:
Compiling...
Context: MakeProjectAndDependenciesCommand application=TestAppJsp.jws project=TestProjJsp.jpr
[7:26:39 PM] Successful compilation: 0 errors, 0 warnings.
[Application TestAppJsp is bound to Server Instance DefaultServer]
[Starting Server Instance DefaultServer]
#### Server Instance DefaultServer could not be started: Server Instance was terminated.
The "Running: DefaultServer" now comes up with:
C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
[Server Instance DefaultServer is shutting down. All applications currently running will be terminated and undeployed.]
Process exited.
The WLS is still running though as I can still access its adm console.
To me it seems that it is attempting to start a separate instance of the WLS for each run attempt, but then I could be wrong.....:(
Later I'll try to change the default WLS port from 7001 to 7101 as suggested in another port here.
I must admit that I'm a bit surprised that the JDev11g doesn't work fine at this very simple level when performing a default install.

I want to create home page for my application with short URL

I want to create home page for my application with short URL
as when I want user to use my application user must go to URL like this
http://127.0.0.1:7101/My-Project/faces/app/empModule/allEmployees/viewMyEmployees.jspxI want the user to use short URL , How can I use shorter URL not all this one.
I want shorter URL for my application not to write full path .
thanks in advance.
Edited by: user611775 on Oct 31, 2010 10:21 PM

Well,
it's up to you. The first part (Mcit-Project-ViewController-context-root) is the context root which you define in the view controller project. 'faces' is the name the servlet filter reacts on. You can't omit it but shorten it in web.xml. The rest is your directory structure. I'm not sure how to shorten this other as to move the jspx files back into the web root folder.
By the way an ADF faces app never uses the .jspx at the end of the url. If you specify '.jspx', you only render the page but don't start the work flow.
Timo

Problems building a stand alone application with LV 8.6.1.

I'm having problems building a stand alone application with LV8.6.1. I'm using a USB- 6008 DAQ and USB-6501 Digital device in the application. I already have an simple executable on the machine so the Run time Engine is already installed. For the USB DAQ device, I assume I need to include the DAQmx8.8 as one of the installers. When I attempt to build the application, I'm prompted for several disk, one being a distribuition disk 1. I have the installation disk for the developer package. I did not see a distribuiton disk as one of the installation disks. When I insert disk 1 I get an error that another application is trying to run. Could someone tell me which installers I need to include and where do I find the "distributor" disk.
Thank you,

are you building installer for the first time on this PC?...It usually asks for the drivers CDs and some toolkits if required.
you just need to use drivers CDs (comes with LabVIEW) from which you installed on this PC. If you have ever upgraded drivers, then you have to use the latest CDs only.......
another issue may be ...when u insert the driver disk, it has autorun, it will launch drivers installation wizard....close that and then try to build distribution.........
Message Edited by Anil Reddy on 09-25-2009 01:22 PM
Anil Punnam
CLD
LV 2012, TestStand 4.2..........

How to ... Generate PDF from BexWAD Application with company Logo in header

Hi all profis,
I read many theories (on-line help, sdn forum, google) about creating a PDF document with pictures, logos, texts and so on, but in each of them is some "...but, limitations, only if ..."
The easiest way, I guess is to create a BexWAD Application with item "REPORT" and "ANALYSIS ITEM".
In REPORT - a crystal report page, is saved company logo with text
ANALYSIS item includes data
Via Export (into PDF) those both items has to be exported. The only topic is, how to repeat the report item on each page of a PDF document? There is a possibility to repeat column names, but not a company logos as a header.
I will ask in general -> Does someone has a solution, how to export data from SAP BI into PDF including Logo and Text(Company Adress) in header (which will repeat on each page) ??
Thank you very much for any purposes. As answer I prefer a concrete suggestions, not links to on-line help.
Have a nice day.
Standa

I have another idea to create a PDF file with company logo and hierarchical structure of data.
Via Report designer, it is not possible to display data in hierarchical structure, but it is possible to add logo (picture) into header.
Via WADWeb Application designer, it is possible to display data with a hierarchy, but a logo is not shown on each page.
Via InformationBroadcaster, there is a possibility to add into header a free text. There is an option <PR_ONLINE_LINK> . Can I create another element (new, own one), which will contain a picture? How can I edit this element <PR_ONLINE_LINK> ? Would it be possible to add there a picture?
Thank you
Standa

One application with Multiple schemas- common application frame work

Hi All,
I am trying setup a common application frame work in apex. Please help me.
How to achieve this.
Creation of one application attached to different schemas at run time. So that my application maintaince is going to be easy instated of creating copies of same application.
More details:
1. I have one application with 100 pages pointing to a schema dev_common in one workspace APP_COMMON. I have 50 schemas with same structure of dev_common schema with different set of data ( because of large amount of data).
So I want to create one application attached to different schemas.
2. And another thing is I have 100 users, the user can work on 1 or multiple schemas ( I mean same application with different schemas attached)
Any help much appreciated.
Thanks,

Thank you for the reply.
>> b) I think you have to give access rights for the dev_common and app_common to all users.
Dev_common schema is a kind of placeholder. I have 50 schemas same as dev_common because of different business requirements but the front end is same for all 50 schemas. How can we create one application used for 50 schemas instead of creating 50 applications and 50 workspaces.
Please help me.

Need assistance creating applications with superseedence to uninstall Office 2010, Lync 2010 and then install Office 365 click to run 2013

We are getting ready in a few months to uninstall our locally installed Office 2010 and head to the cloud with Office 365 2013. I have created applications to uninstall Office 2010 and Lync 2010 and then added them to the supersedence tab for Office 365
office 2013 click to run with appv5.
When deploying the office 365 2013 application it does not uninstall office 2010 or lync 2010 with the supersedence. I am able to manually uninstall Office 2010 and Lync 2010 with the command lines I am using in the applications.
The application uninstall for Office 2010 is:
The application uninstall is an exe so I created an application, created a deployment type with the location of our Office 2010 admin point, installation program and uninstall program are set with the same line as I have tried to deploy it separately and
also as a supersedence in the Office 365 application setup.exe /uninstall ProPlus /config "\\sccmserver\share\Office2010\ProPlus.ww\silentuninstallconfig.xml. The silentuninstallconfig.xml was created from the original config.xml file and edited
to these settings:<Configuration Product="ProPlus">
<Display Level="none" CompletionNotice="NO" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="Reboot" Value="Never" />
<Setting Id="SETUP_REBOOT" Value="NEVER" />
<OptionState Id="ProductFiles" State="Local" Children="force" />
</Configuration>
The detection method is the folder path to see that office 14 exists. When I deploy this the machines finish with success showing this exists, but does not uninstall Office 2010.
running the command line manually mapped to this location on a machine uninstalls office 2010 without issue.
Lync 2010 uninstall:
Lync is an exe so I am using the LyncSetup.exe /silent /uninstall. The application is in the supersedence tab for Office 365 2013. This never installs. If I create a softare distribution and deploy it on its own it uninstalls without issue.
We are going to use Lync 2013 with our office 365 2013 installation so we need to uninstall this. The detection method for lync is file system folder and the Microsoft lync folder for detection.
MS Office 15 (Office 365) was created with the click to run tool. I can install this with the application I created using the appv5 package created with the click to run tool. The issue is we need Office 2010 and Lync 2010 uninstalled first.
Having both versions of Office installed in test has caused issues where Office 15 365 will not list in add and remove programs and cannot be uninstalled even with the fix it article to remove office 2013.
I have looked at many articles and so far it is not working for us. Any help appreciated to get us to the cloud.
Thanks,
Brit

The applications I have for uninstall of office 2010 and Lync 2010 for some reason do not uninstall. Manually testing the command lines they do. The detection method seems to be hanging things up. On the lync uninstall detection method I have
the setting type of file system, type folder, path c:\program files\ folder name Microsoft Lync.
I highly recommend using something other than a file/folder "exists" detection method. Installers are constantly leaving things behind due to environmental inconsistencies. It may leave files/folders behind with a schedule to delete files on next reboot.
These things are unpredictable and very hard to use. I just use the "HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall" Registry location. There you can actually key off the "Product Version" DWORD as well which gives you an even more accurate method
to determine if the application you are trying to deploy (or expect to exist) is truly there. This, of course, being if you are not using an MSI. If you have MSI technology ALWAYS use the product code unless the person writing the MSI chooses to use the same
product code for every version release of their product. In which case, Use the registry method.
As far as getting the supersedence and everything working. You need to start from the basics. Create Applications for all of the apps you want to remove. Make sure they install and uninstall properly (seems like overkill but it isn't that hard). Once you
have working install/uninstall applications then you can easily apply supersedence to your new applications with a setting of Uninstall on the superseded apps you should have no problem getting rid of them. I have done this for numerous things.
For example, I did this with Cisco Jabber to replace older versions of jabber, older versions of cisco unified personal communicator and lync and OSC. All of these replaced versions had to have an Application but once it was in it took two seconds to apply
all the supersedence rules and now I know when I push that software out no matter version is running on any machine it will pull all the old apps off and put the new one on.
Dustin Estes - MCP | www.dustinestes.com

Application with questionaire

Similar Messages

Maybe you are looking for