Application world won't open in PlayBook when using BIS

App world on my PlayBook won't load when I am using bridge with BIS.every other thing works though. Why is this so? Please someone help
Solved!
Go to Solution.

It varies by carrier so you need to call them. My carrier includes it

Similar Messages

When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.

When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.

Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.

Blackberry App World won't open when you click on icon

Blackberry App World won't open when you click on icon, I have done reboot and batt pull and redownloaded - any ideas

Hello scottex968,
Welcome to the forums.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
Thank you
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

BB app world won't open when connected to wifi

Hi After purchasing my Blackberry Pearl 3g everything worked fine. Then one day I got a message saying there was a new version of app world and to install it . What a mistake that was ever since the bb app world won't open and says there is no wifi connection when I am connected !! I have deleted reinstalled rebooted everything but nothin works. It works perfect through 3g when the wifi is not connected . Please could someone tell me whats the problem Thanks

At the present time, the on-device AppWorld client requires an active BIS-level data plan from your carrier. Further, it only accesses the AppWorld infrastructure via your carrier data network -- it will not connect via WiFi, even if you have an active BIS plan and BIS is connected via WiFi.
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
As for what might come in the future -- such information (at least, not authoritative information!) is not typically available here (as per the ToS).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Adobe Application Manager Won't Open and CC Desktop failed to install

I am running Win 7 Ultimate. Adobe Application Manager Won't Open and CC Desktop failed to install on my computer after I signed up for Adobe CC tonight. I am currently using the CS5 suite (perpetual license) and do not want to uninstall any of the programs until I am successfully running the Adobe CC versions. The AAM gives me an error message saying that it failed to open when I select it, and the creative cloud installer fails to install. I have tried restarting my computer. Help? This is very frustrating. I am a student and use this software on a daily basis, and can't afford to not have these programs available when I need them.

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/
OR
Some download & install troubleshooting links
-Comodo Security kills download http://forums.adobe.com/thread/1460361?tstart=0
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088

My ipod won't open the apps when i click on them?

My ipod won't open the apps when i click on them, i've restarted my ipod multiple of time, closed everything that's open, and they are still not working, but i get the notifications through, please help!

Try downloading and installing another free app from the App Store. This has resolved the issue for a number of users. Otherwise, you may need to try and restore your iPod from a previous backup via iTunes.
B-rock

I went to import special characters in imovie '11 and now the character window comes up on every application, yet won't open in iMovie at all, it flashes across every screen on each key/mouse click

I went to import special characters in imovie '11 and now the character window comes up on every application, yet won't open in iMovie at all, it flashes across every screen on each key/mouse click, stops the other software from running, and won't shut off, ever.

Try trashing the .plist in Home/Library/Preferences which has CharacterPalette in its name.

I have LR5.7 and it won't open import dialogue when memory card inserted, but I have clicked checkbox in Edit - Preferences

I have LR 5.7 and it won't open 'import dialogue' when I insert a memory card, but I have clicked the checkbox in Edit - Prerences.

Have you closed and restarted Lightroom since you checked that box?

Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

1. You have allowed Apple to auto-upgrade your Mac
Turn off auto-update here:
Menu > Apple > System Preferences > App Store
2. The Icons on your dock are Aliases not real apps
They point to where the apps really are which is:
For Pages 5.2.2 in your Applications folder
For Pages '09 in your Applications/iWork folder
3. You are alternately opening documents randomly with either version of Pages
Both Pages have the same file extension .pages and there is no certainty as to which version opens them when you double click on a file.
right click on the file and choose which version you want to open it
4. Pages '09 can not open Pages 5 files
Pages 5 can not open Pages '08 files, and will convert and change Pages '09 and Word files.
It will also auto save opened files into its own format.
You can export these back to Pages '09 if you need to:
Menu > File > Export > Pages '09
5. Yes Pages 5.2.2 is a marked downgrade
Pages 5.2.2 has a few improvements but has had over 110 features removed and is buggy.
Sooner or later you will not be able to open a file or have it damaged in some way and it has a complex obscure file format largely incompatible with everything else, so you will not be able to rescue the contents of your file. If Pages or some third party server/eMail don't trash your file, eventually Apple will do it for you as it did when it released Pages 5 last September. I recommend using Pages '09 for the time being whilst you look for viable alternatives, some are here already and some are on the way.
For further information about what has happened:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=0882463378700 abf43a0f2433506bbbc&mforum=iworktipsntrick
Peter

My applications suddenly won't open!!!!!!

Safari, photobooth, all of the microsoft office apps won't open. I just clicked on the icons and all of a sudden they won't open. I've checked and nothing seems to be deleted on any of them so I don't know what's wrong. When I open Safari, nothing happens but when I try to open the microsoft office applications something pops up that says "application launch failure" and then something about a shared library error. If anyone could help me out I'd really appreciate it. I'm a college student so microsoft office is kind of important. Thanks!

That's not good.
Unfortunately it would seem you may not be able to open anything unless you can get to restore your data. See my backup FAQ* on how to restore your data:
http://www.macmaps.com/backup.html
Once you are restored with Data Rescue or FileSalvage as mentioned above, we can attempt to resurrect the system from what you have restored.
Unfortunately, going into the computer world without knowing what a backup means is asking for trouble. Everyone needs one. Some day you will lose all your data, if you don't make one. A backup is simply at least a second copy of your data separate from your computer.
Please inform whoever got you into the world of computing they should know to prepare everyone who gets into the world of computing with a backup plan.
Good luck. I'm happy to help you understand my link every step of the way if necessary. Just let me know please when it gets over your head.
- * Links to my pages may give me compensation.
Message was edited by: a brody

Old Applications & files won't open in OSX-Tiger/Classic

[post moved from other forum]
I finished my Powerbook's hardware upgrade with success yesterday(with thanks to JPL, Sig, A_Brody and other's great advice). System is now Powerbook G3 400 Firewire with 512mbRam, new 40GB HDD, and OS-X Tiger. However...
I can't seem to get the older Applications or their files to open. I get the error message:
"There is no default application specified to open the document Appleworks 6"
and/or
"Could not be opened because the application that created it could not be found--- could not find a translation extension with appropriate translators"
The upgrade/update procedure included...
===Back-up all files on the old 10GB HDD to an external USB drive.
===Remove old and replace w/new 40GB HDD, also install new 512MB PC-133 RAM module in lower slot.
===booted from old OS CD and ran Hard drive set-up utility with two partitions, one 30GB the other 10GB.
===Install OS 9.0.4 from that original Apple software CD onto the first 30GB partition.
===Onto same partition, ran OS-9 Update 9.1.0, then 9.2.1, then fireware update 4.1.8f5, then Update 9.2.1
===Installed OS-X Tiger onto the first 30GB partition
===Moved all backed-up files from the external USB drive onto the second 10GB partition.
I have tried running the old applications in both OS-X Classic mode and also after changing the "Start-up Disk" to the smaller partition (which should be a clone of how the original Hard drive was set-up i.e. folder structure etc.)
I'm quite surprised that when re-booting to the smaller partiton, that although it looks just like my system prior to upgrading, the apps don't run and the files don't open those older apps that created them. I assumed that the smaller Partition--and booting to it--would be the same as if the original Hard drive was still in the powerbook.
When I get those error messages above, I have followed the "Choose Application" button thru to where I could choose the application. I follow to the "Applications (Mac OS 9" folder to where the actual APPLEWORKS 6 app (for exmaple) is located, but it is greyed out and can't be selected. BTW later I did copy all of the contents of the original "Applications" folder from the backed-up HDD into the OSX "Applications Mac OS 9" folder. Also note, the apps in that folder are listed as KIND "Unix Executable File". The files (in this case AppleWorks files) are also listed as that file KIND.
===In the OSX's System Preferences/System/Classic/Advanced tab, I have tried the REBUILD DESKTOP procedure--with no effected change. I know I read elsewhere in discussions that there was a procedure to re-boot with a certain keyboard held-key combo that allows to re-build desktop upon booting?? I don't remember the keyboard combo. And,not certain how that procedure is different.
===In the change Start-Up disc Utility, I now see four Systems to choose from...
Mac OSX 10.4 on New 30GB HD
Mac OS 9.2.2 on New 30GB HD
Mac OS on Old 10GB HD (that's the smaller partition),
Mac OS 9.2.2 on New 30GB HD
Network Start-up
Both the second and forth choice will boot-up to OS 9.2, but as mentioned the apps won't run and files won't open
I'm guessing the reason the third choice won't boot (it reverts back to OSX Tiger when I try) is because that original System copy is OS 9.0.4 (backed-up prior to running the OS-9.1 and 9.2.1, 9.2.2 updates.). Also note, when in OS 9.2.2 when I go into that Utility... Apple/Control Panels/Startup Disk it doesn't list the old OS on the smaller partition. BTW could I now run/perform the OS-9 updates to bring that System on the smaller HD partition up to OS-9.2.2 with out causing problems (and maybe providing solutions?)
I wonder...
??? Why would I be having to choose which application would open an application---wouldn't an app open on its own (Unix Executable File")
??? When I moved the orig HD back-ups on the external USB drive I noticed a file with some kind of PC icon was being created within the folder. Currently I see that the file is now displayed as FINDER.DAT. Does this file relate to the error that refers to "appropriate translators"? Could the Apple Macintosh files being backed-up onto an external USB drive that may not have been formated as Apple HFS type be causing a problem?
??? Why wouldn't the smaller 10GB partition with the old HDD back-up copy moved to it not function like the original Hard drive? Particularly when I choose to boot to its SYSTEM w/Start-up Disc? BTW when I choose that route, the powerbook just boots to OSX Tiger.
THANKS for any replies, you all have been a great help with the challenges of upgrading...
MSG-PWRBkG3
PS:
Sorry for the long post. But, I have included as much up-front details as possible to assist in your replies. I also want to help others reading this thread later on as to what (correct or incorrect) procedures were followed... to help them see how these in-compatibility scenerios would be similiar to their situations... leading to solutions for all.

Thank you for including as much detail as you did. It makes it much easier to troubleshoot this type of issue. What I'll do is basically follow along with the procedure you used and point out where you (unknowingly) ran into problems.
"Back-up all files on the old 10GB HDD to an external USB drive."
Okay, I'm betting that this external USB drive was formatted as PC-Exchange/Windows format. Since this type of disk format doesn't have native support for the special "Mac" information about files (such as resource forks and HFS metadata like file type and creator codes), when Mac OS writes files to these disks, it needs to use a special method. When you copy the files from OS 9, OS 9 adds special "FINDER.DAT" files and also stores the resource-fork-parts of the original files inside a "RESOURCE.FRK" folder on the disk. My FAQ goes into more detail about this. When, from OS 9, you look at the files you just copied to the PC-formatted disk, and they appear identical to the files on your original 10 GB hard drive, that is in fact a complete illusion. The files as they exist on the PC-formatted disk are very different from what they appear. When you hook it up to your OS 9 Mac, the files appear fine, and you can copy them and have them work just like the original files did. If, on the other hand, you hook this PC-formatted hard drive up to your OS X Mac, it looks at the files in a completely different way. If you copy the files off of this disk from OS X, most of the files won't be usable.
"Remove old and replace w/new 40GB HDD, also install new 512MB PC-133 RAM module in lower slot."
"booted from old OS CD and ran Hard drive set-up utility with two partitions, one 30GB the other 10GB."
"Install OS 9.0.4 from that original Apple software CD onto the first 30GB partition."
"Onto same partition, ran OS-9 Update 9.1.0, then 9.2.1, then fireware update 4.1.8f5, then Update 9.2.1"
"Installed OS-X Tiger onto the first 30GB partition"
"Moved all backed-up files from the external USB drive onto the second 10GB partition."
If you did this from OS X, you will run into problems, whereas if you do this from OS 9, you'll be okay. The reason for this, as I mentioned above, is that OS X doesn't know how to "see" the files in the same way that OS 9 does.
This is what I would do. Make sure you still have the PC-formatted drive with the files you backed up from OS 9. Reboot into one of your versions of OS 9 that works properly. Hook up the external USB drive, and the files on it should appear properly and function properly. Now copy the files over onto your local hard drive and they should work properly as well. The files that you copied over from OS X won't be useful and can be deleted. Then reboot into OS X and you should be all set.
Hope this helps....
Dual 2.7 GHz PowerPC G5 w/ 2.5 GB RAM Mac OS X (10.4.5)

Blackberry App World won't open!

I have the Blackberry Torch 9800 and and when I try and open App world, it doesn't do anything. It used to open but yesterday and today it won't open. I tried re installing it, deleting it then installing it again and it still won't do anything. Any suggestions?

Can anyone help me?

App world won't open

HI, I have a BB Bold 9870 that's about a year and half old, and I've never had problems with it, until now.
For the last week or two I've been having trouble with BB App World.
The app will not launch. I've tried rebooting, battery pull while power is on and off, deleting and reinstalling both an older version and the current version, and it downloads and installs fine, but still won't open. I haven't installed any other apps (read on another forum that some cause problems).
Not sure where to go from here.
Thanks!

Those are the steps I did on my 9650:
- Security Wipe --- "User Installed Applications"
- Connected to "BlackBerry Desktop Software" and I was prompted to downgrade "BBM" and to reinstall "Blackberry 6.0.0 System Software" and to install "Facebook".
- Installed App World from http://m.blackberry.com/www/en/appworld.html
All good now!!!
I guess something was corrupted and that’s why wasn’t working properly.

Error message: "The application "Numbers" is not open anymore." when trying to open or force quit.

MacBook Pro (15-inch, Late 2008) OS 10.10.1
iWork ‘08
Numbers 1.0.1
Error message: "The application "Numbers" is not open anymore."
I've tried to delete iWork & reload it, but still get the same message and can't open numbers. I've run disc utility (verify & repair disc and permissions).

Jane,
iWork '09 is $19 on Amazon. I would jump on that option. You won't miss iWork'08.
Jerry

XCode 4.6.2 Won't open any window when launched

Hi,
I have been running Xcode On OS X 10.7.5 for quite a while without any problem. Launching XCode I had an update request to which I agreed. After the update lauching the XCode won't open any window. I have seen that there were similar problems but on previous versions of XCode.
I deleted the application from Mission control and dowloaded again from the Mac App Store. Lauching XCode still won't open any window. No freeze, no error messages, the applications sits in the dock and is marked as open, but now window appears.
Your help would be welcome.
Regards.
Alain.

Hi,
I am going to reply to my own question.
The main Xcode Window didn't open by default as I was used too, but had to be selected from the windows menu.
Too simple I guess!!!!
Regards.
Alain.

Application world won't open in PlayBook when using BIS

Similar Messages

Maybe you are looking for