Applications Addon ST-PI 2008_1_640 and ST-A/PI 01L_ECC500
Dear All ,
We are using ecc5 release 640.
I am facing the problem in Service Tools for Applications Addon ST-PI 2008_1_640 and ST-A/PI 01L_ECC500
Mu current sp level is
ST-A/PI 01J_ECC500 0 - Application Servicetools for ECC 500
ST-PI 2005_1_640 3 SAPKITLQH3 SAP Solution Tools Plug-In
After running the RTCCTOOL report I am getting and error .I have some queries
1 as suggest I can go directly 01J_ECC500 to 01L_ECC500 same for 2005_1_640 to ST-PI 2008_1_640.
2 Do I have to upgrades before SAINT version 6.40/0019.
3. As per note 69455 Note: As of 28th Nov. 2008 a new release 01L* of addon ST-A/PI has become available. The previous release 01K* will still be sufficient forservice preparation until 31th December 2008.
Regards,
kumar
For the dependencies and pre-requisites, just read the Notes recommended by the RTCCTOOL run. when you downloads the ST-PI or ST-A//PI or even any patch, it's information file is always there with it in marketplace which tell what pre-requisites should met before that particular patch can be applied successful. For 'pre-requisites', here means, the support pack/patch level which should already be there before applying the current one in question.
And, like if we do not have any SP of ST-PI or ST-A/PI already in our SAP system, then to install them for the 'first time', we need to download the 'installation files'. If you already have some patch level of ST-API or ST-PI in the system, then we need to downlaod the 'delta upgrade' files for each of them. Read those notes, everything mentioned.
For normal precaution, just make sure that /usr/sap/trans filesystem has enough space and do this patch activity in less user load time, however st-pi and st-api woudn't be affected much even with user loads.
Similar Messages
-
I used to have an application in my iPhone 4 and 4s that captures business card and creates its content to my contacts. Its no longer working with my i5. Can you recommend me a new apps for this same function
Try CardMunch it works well for me
-
InterVideo WinDVR Application has encountered a problem and needs to close.
My TV Anywhere has suddenly stopoed working and the message "InterVideo WinDVR Application has encountered a problem and needs to close. We are sorry for the inconvenience." appears each time I try to open the program. MSI Radio works fine. I have uninstalled and re-installed the programe (originally MSIPVS now MSIPVS3). I did try to download the new Beta drivers just to try, but the zip file shows 0 bytes!
Has anyone come across this, or can anyone suggest what I can try to resolve the issue?
Many thanks in anticipation
GarethJeremy:
I should point out that I am much more confident with software issues. I am not a hardware person and have never attempted to open up the box!
Realtek is the card on the motherboard.
I hope this is the information required:
OS Information:
Property Value
OS Name Microsoft Windows XP Professional|C:\WINDOWS|\Device\Harddisk0\Partition1
Service Pack 2.0
OS Manufacturer Microsoft Corporation
Windows Directory C:\WINDOWS
Processor:
Property Value
Current Clock Speed 3000
Description x86 Family 15 Model 2 Stepping 9
Manufacturer GenuineIntel
Name Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory (RAM):
Property Value
Bank Label RAS 0 & 1
Capacity 536870912
Bank Label RAS 2 & 3
Capacity 536870912
Total Memory Deteced in Hardware: ~1024 MB
Memory Reported to Operating System: 1023MB
Disk Drives:
Property Value
Description Disk drive
Manufacturer (Standard disk drives)
Model Maxtor 6Y160M0
Media Type Fixed hard disk media
Size 163921605120 (~153 GB)
Number of Partitions 2
Description Disk drive
Manufacturer (Standard disk drives)
Model Canon MP Memory Card USB Device
Media Type
Number of Partitions
Description Disk drive
Manufacturer (Standard disk drives)
Model IC35L060 AVV207-0 USB Device
Media Type Fixed hard disk media
Size 61492193280 (~57 GB)
Number of Partitions 1
Installed Printers:
Property Value
Name PaperPort Color Image
Port Name BIPORT
Default False
Driver Name PaperPort Color Printer Driver
Name PaperPort Black & White Image
Port Name BIPORT
Default False
Driver Name PaperPort Mono Printer Driver
Name Microsoft Office Document Image Writer
Port Name Microsoft Document Imaging Writer Port:
Default False
Driver Name Microsoft Office Document Image Writer Driver
Name Generic / Text Only
Port Name LPT1:
Default False
Driver Name Generic / Text Only
Name Canon MP370 Series Printer
Port Name USB001
Default True
Driver Name Canon MP370 Series Printer
Name Auto Microsoft Office Document Image Writer on GARETH-14ETIB74
Port Name \\GARETH-14ETIB74\Printer
Default False
Driver Name Microsoft Office Document Image Writer Driver
Motherboard:
Property Value
Manufacturer MICRO-STAR INC.
Model
Name Base Board
Part Number
Product MS-6758
Serial Number 00000000
Version 2.00
BIOS:
Property Value
Manufacturer American Megatrends Inc.
Name Version 1.00
Release Date 20040324000000.000000+000
Version AMIINT - 10
Monitor:
Property Value
Description SyncMaster 173V/172V/173S/173B
Name SyncMaster 173V/172V/173S/173B
Screen Height 768
Screen Width 1024
Keyboard:
Property Value
Description Easy Internet Keyboard
Pointing Device:
Property Value
Manufacturer Logitech
Name HID-compliant Wheel Mouse
Sound Card:
Property Value
Manufacturer Creative Technology, Ltd.
Description Creative EMU10K1 Audio Processor (WDM)
Device ID PCI\VEN_1102&DEV_0002&SUBSYS_80661102&REV_0A\4&1F7DBC9F&0&08F0
Manufacturer Realtek
Description Realtek AC'97 Audio
Device ID PCI\VEN_8086&DEV_24D5&SUBSYS_75851462&REV_02\3&13C0B0C5&0&FD
Video Card:
Property Value
Adapter Compatibility NVIDIA
Adapter RAM 268435456
Description NVIDIA GeForce FX 5600XT
Installed Display Drivers nv4_disp.dll
Driver Version 6.14.10.6693
Driver Date 29/10/2004 16:50:00
Video Mode Description 1024 x 768 x 4294967296 colors
DirectX Installation:
Property Value
Version 6.03.01.0146
Modem:
Property Value
Network Adapters:
Property Value
Description Intel(R) PRO/1000 CT Network Connection - Packet Scheduler Miniport
Description Packet Scheduler Miniport
Description Microsoft TV/Video Connection
Description 1394 Net Adapter
Description 1394 Net Adapter
External Ports:
Property Value
External Reference Designator Def
External Reference Designator Sanjoy
Expansion Slots:
Property Value
Slot Designation PCI1
Slot Designation PCI2
Slot Designation PCI3
Slot Designation PCI4
Slot Designation PCI5
Slot Designation AGP
Copy To Clipboard
I do very much appreciate the help from you all!
Gareth -
Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another cannot operate the ipad at all, tried switching off and back on again, also restored the ipad but of no use
try restart
http://support.apple.com/kb/HT1430 -
Hi,
We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1.
When a file url is clicked instead of asking for Save or Open or Cancel options, the file gets opened on IPad by default.
Is this default behaviour which cannot be changed or can it be configured to ask user preference?
When we try to download a file(.pvw file -> a model file) in the above application, safari throws "Download failed" error.
Please suggest what needs to be done.
Regards,
PramodSafari on an iPad in general does not allow downloading of files. That's a safety precaution in the iOS SDK to keep unauthorized content off of iOS devices. Safari will open from the web site file types that it can handle, but direct downloading isn't normal behavior, and I don't believe the behavior can be changed, though you can try asking in the developer forum, either here or the one to which you have access as a member of Apple's iOS developer program.
Regards. -
View application pages - view forms views and application pages. enumerate lists
view application pages - view forms views and application pages. enumerate lists, if we disable this permission in sharepoint then user gets blocked from getting into application pages which is good. But now I have few list view web parts on a page and user
is not able to see those reports based on view. It shows working on it. As soon as I enable view application pages permission it works.
I need a permission level -view forms views only.
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint LeadHi Amit,
SharePoint has a feature called “ViewFormPagesLockDown” at site collection scope. After enabling the feature, all groups / users not having the “View Application Pages” permission will not be able to navigate to pages like “_layouts/viewlsts.aspx”
or “pages/forms/allitems.aspx”.
So, for your issue, please disable the ViewFormPagesLockDown feature via PowerShell command:
$lockdownFeature = get-spfeature viewformpageslockdown
disable-spfeature $lockdownFeature -url [the URL of your site]
More information:
http://sharepointtechie.blogspot.jp/2011/06/blocking-access-to-application-pages.html
http://sureshpydi.blogspot.jp/2013/12/viewformpageslockdown-feature-in.html
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
A required application library failed to load and the product cannot continue
Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
Anyone have any ideas????
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0
Camera Raw 3.7
Chalk & Charcoal 9.0
Charcoal 9.0
Chrome 9.0
Cineon 9.0 (9.0x196)
Clouds 9.0 (9.0x196)
Color Halftone 9.0 (9.0x196)
Colored Pencil 9.0
CompuServe GIF 9.0 (9.0x196)
Conditional Mode Change 9.0 (9.0x196)
Contact Sheet II 9.0 (9.0x196)
Conté Crayon 9.0
Craquelure 9.0
Crop and Straighten Photos 9.0 (9.0x196)
Crop and Straighten Photos Filter 9.0 (9.0x196)
Crosshatch 9.0
Crystallize 9.0 (9.0x196)
Cutout 9.0
Dark Strokes 9.0
De-Interlace 9.0 (9.0x196)
Difference Clouds 9.0 (9.0x196)
Diffuse Glow 9.0
Displace 9.0 (9.0x196)
Dry Brush 9.0
Embed Watermark 1.70.19
Export Transparent Image 9.0 (9.0x196)
Extract 9.0 (9.0x196)
Extrude 9.0 (9.0x196)
FastCore Routines 9.0 (9.0x196)
Fibers 9.0 (9.0x196)
Film Grain 9.0
Filmstrip 9.0 (9.0x196)
Filter Gallery 9.0
Fit Image 9.0 (9.0x196)
Fresco 9.0
Generic EPS 9.0
Glass 9.0
Glowing Edges 9.0
Grain 9.0
Graphic Pen 9.0
HDRMergeAlign 9.0x001
HDRMergeUI 9.0x001
Halftone Pattern 9.0
Ink Outlines 9.0
Lens Blur 9.0
Lens Correction 9.0
Lens Flare 9.0 (9.0x196)
Lighting Effects 9.0 (9.0x196)
Liquify 9.0
MMXCore Routines 9.0.1 (9.0.1x289)
Merge to HDR 1.0x001
Mezzotint 9.0 (9.0x196)
Mosaic Tiles 9.0
Multiprocessor Support 9.0 (9.0x196)
NTSC Colors 9.0 (9.0x196)
Neon Glow 9.0
Note Paper 9.0
Ocean Ripple 9.0
OpenEXR 9.0 (9.0x196)
PCX 9.0 (9.0x196)
PNG 9.0 (9.0x196)
PNG Icons 1.22x1
Paint Daubs 9.0
Palette Knife 9.0
Patchwork 9.0
Paths to Illustrator 9.0 (9.0x196)
Pattern Maker 9.0 (9.0x196)
Photo CD 9.0 (9.0x196)
Photocopy 9.0
Photomerge 9.0 (9.0x196)
PhotomergeCylmap 9.0 (9.0x196)
PhotomergeRender 9.0 (9.0x196)
PhotomergeUI 9.0 (9.0x196)
Picture Package 9.0 (9.0x196)
PictureJohn,
foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
Kind regards and thanks for your info,
Patrick -
When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work
For general advice see Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
AppleScript to check if application is open on host and networked Mac
Hello
Hoping someone can help me with an AppleScript.
Background: I'm running ChronoSync to bi-directionally sync iTunes and one-way mirror my Aperture libraries between a MacPro and an external drive attached to a MacBook Pro. ChronoSync has told me that it's recommended to have the applications closed on both machines and that a script to check this and error if not would be a good way to be sure (the error would be picked up my ChronoSync and abort the sync process).
So, I need a script that sits on the Mac Pro and can check whether Aperture or iTunes is open on that machine or, if it's available on the network, the MBP. If either are open, the script should error invisibly and that will abort the sync. I want to avoid any dialogues or other notifications of the error, and let syncing take place invisibly only when the applications are shut down.
Any help much appreciated.
Thanks
BenThere are various ways of doing this. One is to ask System Events for a list of all running processes and just check for the one in question:
tell application "System Events"
if (get name of every application process) contains "Shades" then
-- your code here
end if
end tell
You may need to check how the app presents itself to System Events. Some use the short application name (e.g. 'Shades') while others, especially backgound apps, may use application IDs such as 'com.apple.WebKit.WebDeveloper', but a quick check of the output of 'every application process' should be easy enough. -
Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy. What should I do?
I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM. But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install. It is like an infinite loop!
Please, someone help!
Thanks!HI gener7!
I'm sorry but I am not on Creative Cloud. I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application. My AAM version is: 8.0.0160
The link you provided was the update that I wanted to install but it does not work. A window shows up during that install that says:
We've encountered the following issues.
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem.
and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
Thanks! -
Adobe Application Manager Won't Open and CC Desktop failed to install
I am running Win 7 Ultimate. Adobe Application Manager Won't Open and CC Desktop failed to install on my computer after I signed up for Adobe CC tonight. I am currently using the CS5 suite (perpetual license) and do not want to uninstall any of the programs until I am successfully running the Adobe CC versions. The AAM gives me an error message saying that it failed to open when I select it, and the creative cloud installer fails to install. I have tried restarting my computer. Help? This is very frustrating. I am a student and use this software on a daily basis, and can't afford to not have these programs available when I need them.
Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/
OR
Some download & install troubleshooting links
-Comodo Security kills download http://forums.adobe.com/thread/1460361?tstart=0
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088 -
The application has encountered a problem and needs to close
I'm building an application on LV using TABs, FPGA DLLs and DLLs that comunicate with CAN, GPIB and PCI devices.
The program apears to work properly but sometimes, and I can't see the patern, it crashes with the error "the application has encountered a problem and needs to close..."
Sometimes the error apears when I'm trying to exit the program, some other times it crashes before that.
I can't find the error because the program may work well for several hours and then crash or it crashes after 5 minutes of working with it.
Any clues on what is going wrong?
Regards,
Daniel Coelho
Daniel Coelho
VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
Controlar - Electronica Industrial e Sistemas, Lda
Solved!
Go to Solution.I'm still going through the example, but since the error ocours sporadicaly this could take some time to pinpoint the error.
I was reviewing the code and I was wondering about some simple things, like:
- I have to many local variables, could this be causing somekind of an error?
- since I'm using DLLs on my code, are there a way to make sure that all DLLs are loaded and unloaded correctly?
My program has a TAB with a simple TestStand user interface and when I change TABs I close the teststand ui; when I use that user interface I load and unload the same DLLs that I use on the other TABs, i. e., when using the UI I load all the DLLs that comunicate with the devices and when I change TABs I unload all the DLLs because on each separate TAB I can control those devices indicidually.
It's a bit hard to explain but I think I managed
Is there some truth on my questions? If so, what could I do?
Daniel Coelho
VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
Controlar - Electronica Industrial e Sistemas, Lda -
RCConsole MFC Application has encountered a problem and needs to close
Alright, heres the issue. I am a computer lab admin trying to remote
view workstations in my lab. I am running ConsoleOne from the server,
once i start ConsoleOne I will be able to remote view/control maybe one
or two computers before i get the error "RCConsole MFC Application has
encountered a problem and needs to be closed immediately"
I can fix this by going into the task manager and closing the
RCConsole.exe process. However i might get one or two computers before
it comes back. I searched the internet for a solution to this and heard
that if i copy the ConsoleOne directory from the server to my local
machine it will work. So I did that and yes it did work, however we are
running a diskless boot system and if I were to copy the directory to
the local machine it would be gone as soon as I reboot.
Ive done some random testing and discovered the following
the console one directory is located on the server in
/sys/public/mgmt/consoleone/1.2/bin
i tried copying the console one directory to the root c: and it worked
fine
then i tried copying it to my network drive on the server
/data/home/grastyc/consoleone/1.2/bin and it worked fine
so based on that i tried mapping a drive to /sys/public/mgmt and tried
running it from there, didnt work.
Any help would be much appreciatedVc++ error messages,fatal errors: Error message: Msvc32i MFC application has encountered a problem and needs to close MFC vc++ c++
Originally Posted by [email protected]
Alright, heres the issue. I am a computer lab admin trying to remote
view workstations in my lab. I am running ConsoleOne from the server,
once i start ConsoleOne I will be able to remote view/control maybe one
or two computers before i get the error "RCConsole MFC Application has
encountered a problem and needs to be closed immediately"
I can fix this by going into the task manager and closing the
RCConsole.exe process. However i might get one or two computers before
it comes back. I searched the internet for a solution to this and heard
that if i copy the ConsoleOne directory from the server to my local
machine it will work. So I did that and yes it did work, however we are
running a diskless boot system and if I were to copy the directory to
the local machine it would be gone as soon as I reboot.
Ive done some random testing and discovered the following
the console one directory is located on the server in
/sys/public/mgmt/consoleone/1.2/bin
i tried copying the console one directory to the root c: and it worked
fine
then i tried copying it to my network drive on the server
/data/home/grastyc/consoleone/1.2/bin and it worked fine
so based on that i tried mapping a drive to /sys/public/mgmt and tried
running it from there, didnt work.
Any help would be much appreciated -
Keyhole DRM Application has encountered a problem and needs to close
Every time I try to run one of the games I have downloaded
from Shockwave e.g Ciao Bella I get the error message
"shockwave.com Keyhole DRM Application has encountered an
problem and needs to close".I am having the same problem. I have done everything that
support has told me and still has not helped. I went ot properties
of my game and the description given is shockwave.com Keyhole DRM
Application. What in the world is going on? No one seems to be able
to help anyone with this problem. -
After a power failure while iPhoto was running, I get the message "Your photo library is either in use by another application or has become unreadable" and iPhoto will not open???? held down the option and the command and tried to run what was ticked off and it just sits there with a spinning wheel and does nothing, can I throw the app away and download a new one? or will it still not open?
, can I throw the app away and download a new one? or will it still not open?
You could, but the error message is indicating that your iPhoto library needs repairing.
Check, if iPhoto will run, if you launch it on a new library. Hold down the alt/option key, while you launch iPhoto. Select to create a new library from the panel that will show. Can you create a new library? If yes, try again to fix the library. Which options have you tried from the Library First Aid panel, when you launched iPhoto with the option and command key held down?
If you have not tried "Rebuild"; do that next. But be sure to make a backup of your iPhoto library, before you try this.
Maybe you are looking for
-
Ipod touch 1st generation will not sync with itunes
plugged ipod touch 1st gen in to computer wont register that its even plugged into itunes the ipod touch charges when I plugged it in just wont register with itunes and itunes syncs with my other ipod just not with this one.
-
Not able to stop OPMN processes using OPMNCTL on AS 10.1.2.0.2
Hello, When trying to stop opmnctl processes using opmnctl following error is coming $ opmnctl stopall opmnctl: stopping opmn and all managed processes... ================================================================================ opmn id=appsde
-
Only half of a song playing?
I just brought a song of the iTunes store, it downloaded fine but only half of the song plays. It plays up until about 2 minutes and then goes on to the next song... Why does it do this =/
-
Poor font quality in Adobe Reader
I have the same document open in two different PDF readers, and the font quality in Adobe Reader is really bad. I am using Adobe Reader 10.1.4. I have checked the rendering in Edit > Preferences. Smooth Text is on for Monitor. Why does this look so m
-
How to make FF default browser on android phone
Want FF set as default browser on my GS-5