Applications and data disappeared

Can someone help me; I just installed iTones on my home machine, and after sync I see all my applications and data has vanished. Does anyone know how it can be restored?
Thank you,
- sg

You could always reformat your external drive, as well as change its partition map style to GUID Partition Map, and then clone to that drive. Swap internal drives, boot off the external drive then clone back to the internal drive, obviously after changing to the GUID Partition Map as well.
My choice of cloning software would be SuperDuper!…
http://www.shirt-pocket.com/

Similar Messages

Can Bootcamp and Parallels share the same Windows applications and data?

I'm looking at getting an Intel iMac which will let me throw away my old PC - Yeah!
I will have a couple of Win apps that I will need to hang on to (Quicken - Quicken for Mac is horrible, but that's another tghread). Anyway, can Bootcamp and Parallels share the same Windows applications and data?
My thought would be to allow my wife to access Quicken from Parallels and not have to reboot. She will only need lightweight access and the overhead of running virtualization wouldn't impact her. I, on the other hand, would want to occasionally boot natively into Windows and run the same application with the same datafile. Is this possible?
Thanks and looking forward to joining the MacIntel world!

Thanks for all of the freplies. I suspected that BootCamp and Parallels could not shar ethe same partition, but wanted to verify. To address some of the other posts:
Re: Quicken vs MoneyDance - I looked at MoneyDance a while back and while it is comparable to Quicken for Mac, it isn't comparable to Quicken for Windows (ergo, Quicken for Mac isn't comparable to Quicken for Windows!). But, as I said, that is a topic for another thread!
Re: Using Bootcamp/Parallels for only one app: I actually have several apps that I still need access to on Windows. I work with many business applications than only run/are supported on Windows as well as receive some complex Office documents which Office for Mac cannot handle. Quicken (for Windows 2007) was just the best example of a consumer app where I could see wanting access from both OS X and Windows.

How do I transfer my applications and data from one Mac to another?

I am buying a new Macbook, anyone know how do I transfer my applications and data from old MacBook to New one?

Or you can be guided bt this 'officail' Apple support document:
http://support.apple.com/kb/PH4441
Ciao.
Csound 1 greetings: Nothing wrong with a little plagiarism.

Can I restore my applications and data from a ML time machine back up to a machine running Lion?

Because of the horrible battery life with Mountain Lion (10.8.2), I am looking to downgrade to Lion. I have a Time Machine backup of my current machine, running ML. I do not want to restore all the way back to my last Lion backup, because that was a while ago. Basically, I want to backup my current ML hard drive, erase the computer, perform a fresh Lion install, and restore my apps/data using the ML Time Machine backup. Is the ML Time Machine backward compatiable with Lion?

jgian wrote:
Because of the horrible battery life with Mountain Lion (10.8.2)
I am unaware of any battery life problem with Mountain Lion. There are many problems with incompatible 3rd party software, but that is a different problem.
I wrote a little diagnostic program to help show what might be causing these problems. Download EtreCheck from http://www.etresoft.com/download/EtreCheck.zip, run it, and paste the results here.
Will the ML Time Machine be backwards compatiable with Lion?
No. 3rd party application may be fine. Most Apple applications and data will not work.
Disclaimer: Although EtreCheck is free, there are other links on my site that could give me some form of compensation, financial or otherwise.

I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to my laptop.

I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.

You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.

How can deploy the application and data to client?

As I know, I can burn a CD with http://mobileserver/setup/webtogo/setup.exe and distribute this CD to client to install web-to-go Client.
But how can I create a package for client to install my application and data?
What tools should I use? Where can I get the information?
Can you give/show me a simple example to make a package and install the package?
Thanks a lot.

Only the carrier to whom the device is locked can unlock it.
StraightTalk is not a supported carrier... not all features may work.

I have two iPhones and synchronize with the same macbook. How I do segregate both applications and data?

I have two iPhones and synchronize with the same macbook. How do I segregate both applications and all the data?

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

Migrating Endeca Application and Data from development to a production server

We need to move an Endeca app (including data domain) to a production server from a development server
I installed EID 3.1 in the prod server successfully and this is what I did after the install:
1. Created a new application in Studio (name: JULY2014POC)
2. Manage Pages - Import the .lar file
3. Copy JULY2014POC.worddat file and JULY2014POC_indexes folder to new server, location: domains/endeca_server_domain/EndecaServer/data with all the servers down. Then restarted endeca server, ps server, and studio server.
4. When I try to create an Endeca Server connection it gives me error (Connection definition format is valid but unable to connect.)
5. This is my entry:
"contextPath": "/endeca-server",
"currentFunctions": [],
"dataDomainName": "JULY2014POC",
"name": "JULY2014POC",
"port": 7001,
"restrictedToRoles": ["Administrator"],
"server": "10.2.192.171"
6. When I run any endeca-cmd at OS level I get the following Warning (4 times):
$./endeca-cmd.sh list-dd-profiles
<Oct 29, 2014 4:51:33 PM EDT> <Warning> <oracle.wsm.resources.policyaccess> <WSM-06210> <An instance of the interface oracle.wsm.policymanager.IUsageTracker bean for the local repository at path "" was not available for configuring the oracle.wsm.policymanager.accessor.BeanAccessor repository accessor for context "ResourcePattern [pattern=DOMAIN/weblogic/endeca_server_domain, subjectType=MANAGED_DOMAIN, terms={PLATFORM=weblogic, SUBJECT_TYPE=MANAGED_DOMAIN, DOMAIN=endeca_server_domain}]".>
default
What am I doing wrong? Can someone please help me? thank you

Hi Sergio,
How the data import and export works is what you have to look into. Whenever you export your content it gets exported to a particular directory. If the same directory should be referenced by the code base as well which would be mentioned in the properties file for fetching the configurations.
If they are not aligned they won't pick it up. Also you will have to create pages like endeca-server and make it the default page in your properties file.
Hope u cross this hurdle soon.
Thanks
Karthik V

Auditing usage of ApEx applications and data

Hi there,
I am new to the Oracle forums and asking this question not as a DBA but from a systems security angle...
I am using ApEx to deliver business applications to my user community and I need to know collect audit trail information on system usage. I'd like to obtain information such as:
- which user made a database change, or accessed particular database records
- if a user has tried to access information that they have no rights to see
- if a DBA has created new users or changed access privileges
and so on...
My interest is in finding out firstly if it can be done and, secondly, how it can be achieved and recorded for analysis.
Grateful for any advice!
Many thanks,
HoinviP

We've turned on fine grained audting (FGA) and the coolest part is that oracle automatically picks up the apex application level user name and puts it in the FGA log. I expected our audit logs to have a whole lot of "apex_public_user" or the workspace schema name in the user field, but when you've got a non-public app, the end user's ID gets captured. Just as it should be.
Our app has two layers of auditing. The vendor delivered application level audit logs so that critical application level events are captured. This is just part of the code overhead of the application. In addition we turned on Oracle FGA so that we know every DDL/DML operation that occurs against our most sensitive tables.
The short answer is that if FGA doesn't get you what you want, you'll have to build your own auditing into your app. There is no magic checkbox or setting that will add auditing to your app, though FGA goes a long way if set up properly.
Inside our apex app, our developer put a process on every page that displays sensitive information. The process calls a stored procedure with the user's name, the sensitive field name, its value and the primary key of the record displayed. The process has the same authorization scheme as the sensitive fields. So, if the sensitive data field is displayed, the process is run, if the user cannot see the field, no audit process is run. It actually works pretty well.
We've also written additional Apex Apps that analyze the application level audit logs so that we can track who is looking at what and when. Very useful.

Relation between Application and Data Group

Hello All,
Can someone please help me to get a query which tells me which Application is associated with which Data Group?
Thanks,
Moore

Moore,
Query FND_DATA_GROUP_UNITS_V -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_DATA_GROUP_UNITS_V&c_owner=APPS&c_type=VIEW
If the view doesn't satisfy your requirements, then write your own query using the following tables:
APPLSYS.FND_DATA_GROUPS
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_DATA_GROUPS&c_owner=APPLSYS&c_type=TABLE
APPLSYS.FND_DATA_GROUP_UNITS
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_DATA_GROUP_UNITS&c_owner=APPLSYS&c_type=TABLE
APPLSYS.FND_APPLICATION
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_APPLICATION&c_owner=APPLSYS&c_type=TABLE
Thanks,
Hussein

How do I transfer my applications and data from one iPad to a new one?

I have recently purchased an iPad2. I want to transfer everything I have on my original iPad to my new iPad then wipe the original clean. How do I accomplish is?

You can restore the new iPad from a backup. You can also sync to transfer all apps, media, photos from your iTunes library to the new iPad.
Read this article to restore from a backup. Make sure that you backup your old iPad before you restore the new one to the backup.
http://support.apple.com/kb/ht1414
From the support page to wipe the iPad clean...
Erase all content and settings
If you don't have access to iTunes, you can use the following steps to completely erase your device:
Tap Settings.
Tap General.
Tap Reset.
Tap Erase All Content and Settings.
You can also restore to factory settings to wipe the old iPad clean. The information is in the article from above.
I found this article and it will be helpful as well.
http://www.ipadforums.net/ipad-help/26087-old-ipad-stuff-new-ipad2.html
Message was edited by: Demo

Does Time Machine backup applications and data?

My MBA running ML has Pages '09. If I set up a refurb running ML will Pages '09 be on the second Mac if I set it up from Time Machine?
Thanks

Yes, it does.
(111686)

Any time I open a photo program the application freezes. I want to reinstall OSX from the original disk and then restore my machine from time machine Will a restore from time machine only restore my Apps and data

Tried to post a question about restoring my i mac from time machine, but this new format makes no sense to me. I want to restore my i mac from time machine after I reinstall the OS from the original disk. Will a time machine restore only restore the applications and data or will it restore the current state of the OS. My machine will not let me open any photo applications (aperture, I photo, NX 2) I have to force quit them every time I try to get some work done.

06-sep-2012 0:14
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA

How do I transfer my applications and files to a new computer

I'm about to buy a new Mac Pro and would like to move my applications and data over. The new computer will come with Tiger installed of course. I'd like segment the drive so I can put windows in one part, and then get everything from the old computer over.
Can I just move stuff from the old computer to the new one or do I need to install all my software again?
Thanks,
Reid Rosefelt

I suggest you look at the answers provided in this entry:
http://discussions.apple.com/thread.jspa?threadID=1100954&tstart=0
If the old and new computers are both Intel Macs and running the same version of the OS (say, 10.4), then the Migration Assistant will probably do this transfer for you quite well (although I have and would do it manually myself). However if your old Mac is a PowerPC computer, even if it is running Tiger, then the above thread is especially relevant to you.

Input Query Data disappears

Hi,
   I have created an Aggregate Level on Multiprovider and restricted in the query as follows:
   Currency Key (USD)
   Posting Period (#)
   InfoProvider
   Actual Amt(RKF by Actual Infoprovider) - Read Enabled
   Plan Amt(RKF by Plan Infoprovider) - Plan Enabled
   Input Query starts in change mode
When I execute the query in Bex Analyzer, I can see data in Actual Amt RKF and enter data in Plan Amt RKF.When I save the data it disappears.For save I am using SAVE_AREA command.Any ideas on what is missing in here.
Before I can make my selections complex, I wanted to try this simple one.Also, I can't execute this query from query designer ..some problem with basis setting, I hope that isn't the reason.I got this working when I created the input query on real time provider rather than multiprovider.But I want to make it work with multiprovider as I need to show data from actuals and plan.
Thanks
RT

Ravi,
You tell the system within your RKF by selecting real time infoprovider in addition to the amount.I deleted what I had created earlier to have a clean start.Here are the steps I followed to re-create: (we are working with 0amount, posting period, currency key and infoprovider objects only)
1.Created 2 restricted key figures (RKF1 - 0amount, actual cube and RKF2 - 0amount, plan cube)
2. RKF1 planning properties data cannot be changed and RKF2 planning properties data can be changed by user or planning functions.
3. Created structure in columns and added these two RKF.
4. Added Posting Period to rows and changed display to key.Acess type to Master data and query execution to char rels.
5.Added Currency to rows and changed display to No Display.
6.In the default values, set posting period to 1and set currency key to USD.
7.Added Infoprovider to free char.
8.Added both posting period (1) and currency key(usd) to char restrictions.
9.Opened Bex Analyzer and created the save command.
10. Executed the query, input the data and data disappears.
Cheers
RT

Applications and data disappeared

Similar Messages

Maybe you are looking for