Applications and services in CC ...

Some of the applications and services in the CC site can not be seen in CC desktop application. I have a trial account, and for example, I can not see "story plus" in CC desktop application. Does this mean that desktop application is not completely syncronized with the CC accounts? So, it seems that we can not use desktop application for doing all the jobs in a CC account ... right?
And secondly, I also can not see Lightroom 5 in CC site. LR 5 is not included in CC?

Hi AttilaHan,
Not all applications are available when using a free/trial membership. The two you cited LR 5 and Adobe Story Pro are examples. If you switched to a paid membership these become available.
Regards,
Abhijit

Similar Messages

  • New Applications and Services Logs in 2008r2

    I am looking to setup auditing for security group changes and I was wondering if any of the new logs under Applications and Services Logs in the Event viewer can be used for this task. Our Security logs overwrite every 30 hours or so and digging through
    the backups is tedious at best. If possible can the new event logs hold this information?
         Any other suggestions on how to do this simply?
    Thank for your help,
    Leed

    Hi Leed,
    Would you please let us know current situation of this issue? Just check if SenneVL's suggestion can help you.
    In addition, for increasing the size of log files, please also refer to following articles.
    Set Maximum Log Size
    Set Log Retention Policy
    If any update, please feel free to let us know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Service applications and services

    What is the difference between services and service applications in sharepoint 2013. I am talking about
    1. Application Management->Service Applications -> Manage service applications
    2. Application Management->Service Applications -> Manage Services
    They both are listed under service applications
    Also if I create a Managed Metadata service from Application Management->Service Applications -> Manage service applications->New  it
    wont turn on Managed Metadata Web Service by itself during the process. So how are they tied to each other. 
    @R

    Take a look at: http://www.harbar.net/articles/sp2010sa2.aspx
    Correct, if you create a Service Application, it doesn't automatically start the service instance (as you may want the SA, but only want to run the SI on specific SharePoint servers). Where the SI runs is where the actual 'work' for that SA occurs.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • We are currently having issues fetching the applications and services list.

    Is there anywhere to get an ETA or some sort of status update instead of wearing out the refresh button?

    I'm still experiencing the same issue.  Has the fix been made available yet?  Eagerly awaiting acces!
    **EDIT I'm sorry, didn't account for the time zone difference.  I thought that the previous post was from hours ago.  **

  • File Defense application and Time Capsule and Time Machine working

    Has anyone experienced problems running Time Machine
    and File Defense at the same time?
    Orginally I made the switch to File Defense from Norton Utilities
    in fall 2008 since Norton slowed down wireless file transfer speeds between
    my Mac's and the TimeCapsule.
    However, lately I has experience issues of recovering files using the Time Machine interface, and was wondering if there is something fishy with the
    File Defense.....
    Subrosasoft.com says about FileDefense:
    "FileDefense is a program that forms the first line of defence in file access. It is a set of programs that provide an easy interface to locking down files and making sure that unwanted access is not given to malicious scripts, applications and services on the your computer."
    The application has not provided any error messages when running Time Machine - but neither did Norton do that. I'm aware that Norton has since upgraded their products, but I have not tested the never ones.
    Regards.
    --john--

    Has anyone experienced problems running Time Machine
    and File Defense at the same time?
    Orginally I made the switch to File Defense from Norton Utilities
    in fall 2008 since Norton slowed down wireless file transfer speeds between
    my Mac's and the TimeCapsule.
    However, lately I has experience issues of recovering files using the Time Machine interface, and was wondering if there is something fishy with the
    File Defense.....
    Subrosasoft.com says about FileDefense:
    "FileDefense is a program that forms the first line of defence in file access. It is a set of programs that provide an easy interface to locking down files and making sure that unwanted access is not given to malicious scripts, applications and services on the your computer."
    The application has not provided any error messages when running Time Machine - but neither did Norton do that. I'm aware that Norton has since upgraded their products, but I have not tested the never ones.
    Regards.
    --john--

  • Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

    Hi All,
    I'm getting the below error in My SHarepoint 2013 search Administration page.
    Crawler background activity - The search application 'Search Service Application 1' on server ""  is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
    on the server.
    and when i click on Crawl Log and content source
    it throws the below error
    The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
    the service is enabled. This might also be because an indexer move is in progress
    When i check the search status
    Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
    As of now search service application is online and search is working.But not sure why it throws the above error.
    I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
    But no luck,This is happening in my prodcution environment.
    Any help will be greatly appreciated.
    There are the logs i have found
    05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
    on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
    sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
    Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)    
    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
    Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
    sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()    
    at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
    - Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
    http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
    05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
    Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
    Anil Loka

    Please try below mentioned steps:
    1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
    2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
    3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
    http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
    4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
    5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
    Please ensure that you mark a question as Answered once you receive a satisfactory response.

  • Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

    Hi All,
    I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
    Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests.  The http status code and text is 400, Bad Request.
    awebsctl.log file has below errors:
    Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    AWEBSVCs http check returned hr=0, bFailed=1
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    Health check request failed, status code is 400, 'Bad Request'.
    SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
    13920 (0x3660)
    Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
    Catalog Website is working.
    Thanks & Regards, Kedar

    Hi Jason,
    Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
    IIS Website: Default Web Site
    Port Number: 80
    with default value for Web Application Name configured.
    For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
    Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests.  The http status code and text is 400, Bad Request.
    Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate. 
    Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
    Possible cause: The designated Web Site is disabled in IIS. 
    Solution: Verify that the designated Web Site is enabled, and functioning properly.
    For more information, refer to Microsoft Knowledge Base.
    And awebsctl.log has the below error lines:
    Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    AWEBSVCs http check returned hr=0, bFailed=1
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    Health check request failed, status code is 400, 'Bad Request'.
    SMS_AWEBSVC_CONTROL_MANAGER
    12/23/2014 11:04:36 AM 16388 (0x4004)
    STATMSG: ID=8100
    What should I check from IIS side?
    Application Catalog Website is functioning properly.
    Thanks & regards,
    Kedar
    Thanks & Regards, Kedar

  • Can you see which apps are open and/or running like you can on an android phone by going to settings applications running services?

    can you see which apps are open and/or running (like you can on an android phone by going to settings>applications>running services)?

    Hi wjosten,
    thank you for the help.  I should have said I had a iphone 3.  A friend has the same phone and she showed me how she can see what web pages are open when she double taps the home button.  Mine is set to bring up favourites when I double tap (chosen from settings>general>home button).. BUT my choices are only HOME; SEARCH; PHONE FAVORITES; CAMERA or IPOD.  I changed my choice to HOME but that just defeats the purpose as when I am at the home page and double tap nothing happens.  Am I making sense?

  • Tuxedo calls procedure and Application Level Service Failure

    hello ,professors all!
    My Tuxedo Service just call an procedure exists in oracle9i, i am sure that the procedure runs ok in oracle9i individually, when it was called by my tuxedo service , it is not ok by first time ,and runs out tp application level Service failure error .But strangely it is ok by second time！
    who can explan it to me and show me a way to solve the difficult problem?
    i spend a lot time wondering the answer!
    Edited by: user9086437 on 2010-9-29 下午9:57

    There are many possible reasons why a database procedure might fail the first time it is executed and succeed after that.
    You should check the Tuxedo ULOG and Oracle database logs for any messages that may point to the problem.
    If there is a LIBTUX_CAT:6205 or LIBTUX_CAT:6206 message in the userlog file then you need to add a tx_open() call to your server's tpsvrinit() or tpsvrthrinit() function.
    If there is an OPENINFO string for the group where your server is running then you are using XA transaction management and should not be connecting to the database in your application code; if there is not an OPENINFO string for the group where your server is running then you need to connect to the database in your application.
    If you set the environment variable
    TMTRACE=*:ulog:dye
    for the server where the failure is happening then Tuxedo will write a trace record of each Tuxedo call and each XA call to the ULOG file. This can be helpful in determining why the failure is happening on the first call, especially if Tuxedo is handling transaction management using XA.
    I hope some of this is of help in debugging the problem.
    Ed

  • I have a problem with my iPhone 4s. Location Services is turned on, but off in applications and I can not change it. It's just marked in gray. What should I do?

    I have a problem with my iPhone 4s. Location Services is turned on, but off in applications and I can not change it. It's just marked in gray. What should I do?

    No - restrictions are not on...
    and  under privacy>location Services - just like before - I can´t change it here

  • Ports required for communication between Web servers and service applications (the default is HTTP)

    We're using SharePoint 2010, I'm the system admin for a SharePoint farm. We enabled SharePoint Search by adding a Search Service APplication. One of the crawl report timer job is failing every 5 minte with the error "Cannot connect to remote server".
    After digging around, we found that the server running the timer job tries to connect to the SearchAdmin.svc on the index server, over HTTPS / port 32844 However, communication over SSL via a non default port is blocked by our firewall.
    According to this article: https://technet.microsoft.com/en-us/library/cc262849.aspx the default is HTTP for communication
    between web servers. How is it possible that it's trying to connect over SSL?

    Hi,
    Quoted from
    https://technet.microsoft.com/en-us/library/cc262849.aspx#ServiceApp :
    You can change the protocol and port binding for each service application. On the Service Applications page in Central Administration, select the service application, and then click
    Publish.
    Here is an article for configuring Windows firewall port rules for SharePoint using PowerShell in case you need:
    http://www.xylos.com/default.aspx?id=1050
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Service Contract and Service Quote, Are they two different application or s

    Service Contract and Service Quote, Are they two different application or same application ?
    What is the difference ?
    thanks
    siva

    Siva
    There is no application called Service Quote (But we can have services in the quoting lines).
    Thanks
    Nagamohan

  • Difference between Professional application and self-service application

    hi frntz,
    May I know the difference between professional application and self-service application in oracle E-biz. Why we cant able to use both at same time ?

    Hi;
    Please check below which could be helpful for your issue:
    http://download.oracle.com/tech/blaf/specs/blafusers.html
    Regard
    Helios

  • SP2013 "Create Service Applicationt" and "Service Applications' Property" buttons are disabled

    Hello,
    I’ve verified that I am local admin on the server that is hosting central admin.
    I run the browser as admin. In fact I am using Central Admin on the start menu. The UAC is disabled on the box any way
    I run the browser on the machine that is hosing CA. I've tested in on many other machines.
    I verified and my user is farm admin. That means I can see my logged-in user listed in CA->“Manage the farm administrators group”
    IE Enhanced Security is off
    Still I cannot create a service application or see any service application’s property. How to find where exactly is the problem?
    Thank you

    Hi Allan48,
    What did you mean ‘cannot create a service application’?
    Whether you meaned that the New service application button was disabled or not services applications were listed when you clicked the button.
    By default, there are some services applications whose properties are disabled, for example Access Services Application and Excel Services Application etc.
    Please make sure that SharePoint Web Services Root Application pool is running in Internet Information Services Manager, then check if this issue occurres.
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • How are permissions applied between Web Applications and from Service Applications?

    I'm quite confused about how permissions are applied to Content Databases in relation to service accounts. So, as an example, I have two web applications - Intranet whose service account is DOMAIN\sps_webapp_default - and My Sites whose service account is
    DOMAIN\sps_webapp_social.  The "sps_webapp_social" account has full control (through User Policy) to the Intranet web app.
    When I go to My Sites> Sites> Suggested Links and click on any suggestions I get the below error and the site is not "followed".  This Content Database sits under the Intranet web app which the sps_webapp_social has full control to.
    I'm also getting similar permission issues when the account that runs various service applications tries to connect to the DB (such as workflow service).  This is happening to new or migrated sites.  I know permissions can be applied directly
    in SQL but this can't be the way to do it? 
    Is there a simple reason why these permissions aren't propagating through?

    I resolved my issue. I deleted the Work Management Service Application and created it again - this time, I made sure the IIS Pool (I created its own application pool) service account running this was the same as the My Site service account. 
    So, running under DOMAIN\sps_webapp_social.  This seemed to clear up all of my permissions issues being thrown up in Event Viewer too.
    My Sites really is a complicated beast...  I'm getting there.  Hopefully this helps somebody else!

Maybe you are looking for