Applications close when I open them

When I open apps they close in about 2 seconds. What should I do?

Hi Katharine,
I have had this problem before myself. I had removed some of the free apps that I had downloaded to my touch via iTunes, since I was not using them. After I did this, I went to use a couple of apps and noticed they were not working. Since I was syncing selected apps, I deselected all the apps and uninstalled them. I then resynced the apps back to the iPod. Or attempted to.
The four apps I was having trouble with would not sync. I got the dialog box that says "These applications are not authorized to play on this computer" (or some such message). What I did then was to reauthorize my computer and they synced fine.
To sum it all up, remove the apps, reauthorize your computer and sync the apps back to the iPod.
Superconductor
Message was edited by: Superconductor41

Similar Messages

HT4623 I downloaded the ios 6 on my iphone. I'm having problems with applications. When I open any application, in seconds then closes and returns to the home screen. What could be happening?

I downloaded the ios 6 on my iphone. I'm having problems with applications. When I open any application, in seconds then closes and returns to the home screen. What could be happening?

Did you change any AppleID accounts or anything? I've seen this happen when changing accounts or certain restore situations.
If you are using iCloud you should be able to reset your phone to Factory Defaults and restore from iCloud, but it always makes me nervous.

TS1702 Why My iPhone 4s close most of my apps when i opened them immediately and return back to home screen

Why My iPhone 4s close most of my apps when i opened them immediately and return back to home screen ?
What is the problem and how can i fix it ?

Download a free app and see if that helps, you can delete the app later if you do not want it.

Why do my photos appear as an exclamation mark when i open them?

Why do my photos appear as an exclamation mark when I open them?
I used my time machine back up from my old expired power mac and uploaded the contents onto my new iMac.
All of the files uploaded successfully as far as I can see (except the old programs don't work and the consequently all those files are cactus :-( )however when I opened iPhoto only a few photos (500) where in some of the folders.
I went back and found the photos in the back up machine (25000) and dumped them on the iPhoto icon. They down loaded successfully into the correct folders and the thumbprints are visible. When I click on an individual photo the enlarged picture appears for an instant and then an explanation mark in a triangle appears in its place.
The original 500 pics actual worked... now after days of mucking around and with lots of advice I have doubled the number of 'photos' to 50000!!! Ahh,,,, and still the exclamation mark appears
Is there anyway out of this predicament??

This went wrong here:
I went back and found the photos in the back up machine (25000) and dumped them on the iPhoto icon.
Never import one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
The ! turns up when iPhoto loses the link to the original photo.
I would suggest that you restore that library from Time Machine again, and then try repair it.
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Can only view file in its blue psd format when I open them in CS6

Can only view file in its blue psd format when I open them in CS6
Is anyone else having this problem?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How can i let my java application closes the other opened windows

how can i let my java application closes the other opened windows: like any other Microsoft Internet Explorer windows ... provided that my java application is not the one i used to open those other windows.... thanks in advance

you'll have to use JNI to access the windowAPI
then you need a list of window handles ... I think there was a function called getWindow and in order to close them you use sendMessage .... for details check out msdn (microsoft developer network)
somwhere I saw a tool called JUtil, which might help you getting started on accessing the win api from java
regards
Spieler

None of my "paid" books will open in iBooks. They show they are there, but when I open them all I get is a blank page. I have checked all the newbie mistakes. Mavericks will not let me uninstall and reinstall iBooks.

All the books I paid money for will not open in iBooks on my MAC. Mavericks will not let me uninstall iBooks, so I cannot uninstall and reinstall it on my Pro. I have deleted and re-loaded the books and they show in my library (as they always did), but when I open them, all I get is a blank page with three dots at the bottom, flashing in sequence. This does not affect the free books from the book store nor does it affect the PDF I have loaded myself. (I had this problem on my iPad when the latest big software came out about a year or two ago, but I was able to re-initalize the complete iPad from my Pro Book.) I have tried just about everything I can think of, but all to no avail. To save time, I have reset my iTunes password and performed all the other "Apple Tips" in the support section, but after 5 hours I am giving up. Surely someone else must be having the same issue??

Yup, same issue since installing Mavericks. iBooks works fine on my wife's Macbook Pro, but on my Mac Pro none of my purchased (protected) books will open - only the free/unprotected ones.
I'm asked for my AppleID password, but nothing happens when I try to open a purchased and downloaded book. I deauthorized, reauthorized, etc ... nothing. Each purchased book that I double-click gives me a dialog asking for my Apple ID password. Nothing else.
I was already buying more books via Kindle than iTunes and this just seals the deal for me. At least I can read my already-purchased iBooks books on my iPad still...

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play at all. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the !&%$#@ Where did my original video files go?

Sounds like a good plan, you can never be to safe and having a second External HD is safer than one.
The only thing that I would do different, is setup the 3T as my TimeMachine Backup and then erase and move my Photos, Videos and perhaps even iTunes Media to the 1T. That way you will have room to backup both the Internal Hard Drive and the 1T External Hard Drive to the 3T using TimeMachine.
Take your time, study and use the > Time Machine - Frequently Asked Questions if you get stuck or aren't sure how to make the move.
Also see > iPhoto: How to move the Library folder to a new location
iMovie ’08: Storing or moving your video library to an external hard disk
and > iTunes for Mac: Moving your iTunes Media folder

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over.

Hi The next thing to do is to Restore back to Factory Settings this will get rid of any bugs . After Restore use same Apple ID /Password then you should get all your Apps & data back If you still have this problem make an Appointment at Apple Store . Cheers Brian

Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

"Catalog"? Are you referencing Ps Elements perhaps?
Wrong forum. We do not do Elements here.
Here's the link to the Elements forum:
Photoshop Elements

Installed Microsoft word on iPad The templates are underlined in English but when you open them they are in a different language

have just installed Microsoft word on iPad all the templates are underlined in English but when you open them they are in a different language

Regarding pseudo-latin template filler language, you can learn about that standard practice at
http://en.wikipedia.org/wiki/Lorem_ipsum

I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ?
thanks,

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

Illustrator CS5 icons showing up on all folders when I open them with a grey "?" .links to CS5-

I have illustrator CS5 icons showing up on all my folders when I open them with a grey "?" mark to the right, even when I open my HD*--When clicked on, the '?" shows zero data but this is a link to Illustrator CS5 that I need to undo. Please assist. Thank you.

Here are Apple's instructions:
If you are using iPhoto ’06 or earlier, you will need to follow these steps to tell iPhoto where the Library is now located:
Hold down the Option key on the keyboard and open iPhoto. Keep the Option key held down until you are prompted to create or choose an iPhoto Library.
Click Choose Library.
Locate and select the iPhoto Library in its new location.
(from http://support.apple.com/kb/HT1229 )
Below (in the link below) is what you should see when holding down the option key and opening iPhoto. Keep holding down the option key until this dialogue comes up. You want to select the Choose Library button.
http://appleclinic.wordpress.com/2008/04/06/change-default-dir-iphoto/

Why do eps files change in size when I open them in AI cc

I have a customer that often submits epss. When I open them in Illustrator CC it always opens them as 8.5 by 11 instead of 3.75 by 2.25 size they should be. If I use preview to open them they are the correct size. Does any one know why this might be?

See my other answer above.
No, Adobe has not updated EPS (or postscript anyway) since the last century.
A PDF includes allways trim, bleed, media and object boxes, EPS does not. If you get such information when you open an Illustrator EPS than it is because it contains an AI part in its file which is responsible for everything Illustrator or PDF like.
Here are some threads why to avoid PostScript:
Re: Print To PDF(What is said about PostScript is valid for EPS too.)
Re: Issues with trapping a postscript file out of Indesign
And many other.
Best is not to use PostScript anymore.

Applications close when I open them

Similar Messages

Maybe you are looking for