Applications freezing - unable to use

Some applications/programs are freezing when first opened. iDVD, Live Type, and Adobe freeze when first opened. Unable to use these applications. Any fix available? Suggestions?
Machine Name: Mac Pro
Machine Model: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 3 GB
Bus Speed: 1.33 GHz

Boot from your backup/emergency drive and repair the boot drive.
Look for SuperDuper and Disk Warrior to help with backups and repairs.
Were you using a Mac previously?
There are a lot of fixes most likely, but it could be fonts, corrupt caches, and with any freezes, corrupt files, disk directory and more.
Did it start at some point? say when you added RAM or drives? did you test both?
Also take a look at Tiger Cache Cleaner and Onyx. All of these programs, and esp. SuperDuper, have excellent pdf manuals, guides, and help sections.
When you first setup a system, it is always a good idea to backup first so you know you can fall back to original and stable system, then upgrade and install. And avoid adding too many things at once.
Adobe: there are some plug-ins and compatibility issues. It also prefers to have more than 3GB memory - especially for CS2 or earlier.

Similar Messages

Recently when creating a new blank page, application freezes. have been using for years without a problem. Upgrade?

recently when creating a new blank page, application freezes. have been using for years without a problem. Upgrade?

When something that used to work stops doing so, the most likely culprit is corrupt preferences. Go to HD > Users > (your account) > Library > Preferences, delete the com.apple.iwork.pages.plist file & then restart Pages. In Finder, hold down the Option key while clicking on the Go menu & your user Library will appear about halfway down the list. Or you can choose Go to Folder from the Go menu in Finder & paste this line in the box:
~/Library/Preferences

New iPh 4s continuously Freezes unable to use for over several hours!!

ok only had the iPh 4s going on 2 months (Oct 14, 2011 received) brand new!! we all know about the famous hot battery and draining (which will still occur if you do NOT turn off all unnecessary notifications). However, my new issue which started at the same time as the hot, draining battery is that the iPh 4s Freezes and unable to shut down, or restart by sticking a pin to the small hole on the right side (where the battery is located) will NOT respond for hours. Only thing displays is the twirling power down icon on black background and the only goes away until the battery completely drains to 0%! this has happened to me 5 times within 1 month!! 1st time it occurred, i got a text from my husband and then took a photos of some notes. Not knowing what happened, figured, the battery had drained down and needed to just plug my iphon 4s in the car charger. Well that was NOT the answer and was left stranded without anyway to contact my husband to pick up our kid from her daycare for 3 hours (5pm is closing time)! i was ****** not able to find anyway to contact my husband due to this crazy issue. my last time and 5th experience of the freezing of the device is when i tried to add a photo to tripadvisor and the freakin device again, freezes, not able to shut down and i had to wait 4 hours before it drained to 0%. Apple Support these are hints to fix the photo app in the 4s it is NOT working properly and freezes the devices.
So my questions is, has anyone had a similar issue like this and how did you resolve it? this new iPh 4s has really made me very angry that nothing has been done to fix these CRITICAL (and health risk) issues.. Oh and yes, i am on the phone apple iphone support now (call started at 7:37p EST - it has been over 40+mins for this young man to get me to the next level (tech support) to help on this issue... c'mon now; really; i have to wait until the phone mysteriously drops?!?!?!); i do not want the answer to be "we will send you a new iPh4s"!! i like my phone and a replacement is NOT going to fix the current serious issues that are occurring on this device. so will they give me a new brain or ear or pay my health bill if later in the future it is discovered these issues are a TRUE health risk all because they did not FIX these critical iphone 4s issue??

Neither the upgrade to Mavericks nor the upgrade of Pages will have removed Pages '09 from your computer. If you have not manually deleted it, you shuld find Pages '09 in a floder named iWork '09 in the Applications folder on your MBP.
Both applications can coexist on your MBP, and you will need both to move back to Pages '09.
Any document that has been opened and saved using Pages 5 (the new one) cannot be opened in Pages '09 unless you open it once more in Pages 5 and Export it as a Pages '09 (or iWork '09) document. Features not supported in Pages 5 at the time it was first opened in that application will not survive the import/export, and anything that used these features will need to be rebuilt in Pages '09.
Once opened and saved in Pages '09, you need to be careful to not reopen the document in Pages 5, and if it is inadvertently opened in that version, to close it without saving (if you want to continue using it in Pages '09.
You need Pages 5 at least until you have exported all documents back to Pages '09 format, and you need Mavericks for at least as long as you need Pages 5.
Regards,
Barry

After the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

[SOLVED] Unable to use GUI applications on any WM I tried except TWM

I'm using Arch Linux at my work despite it's very risky because something may go wrong pretty often (rolling distro, latest packages, DIY for newbs like me etc.). Unfortunately, this is one of those times...
I was using Xmonad. It all started w/ Chromium crashing a lot. I had a discussion about it here, but nobody found a solution. Chromium just got frozen and I could only kill it manually. Then I switched to Google Chrome and it get a little better. Today it was so bad that I couldn't do my daily work, so I switched to Opera; then Firefox... the same! After that I discovered that it happens w/ any GUI application. Good thing I'm using terminals for almost anything else I do. Anyway, I need GUI browser! So I thought that it may be something related to Xmonad itself. That's why I installed Xfce4 and... ...the same - GUI crashes. It's even worse actually because Xfce4 has a lot more GUI elements than Xmonad.
Now I'm writing from TWM and it has crashed only twice in two hours. What should I do? I really have no idea what could broke the things here. I really need help, guys!
Ohh, back home I have PC w/ almost the same conf -- everything works. Driver problems?
P.S. Title says "wrong focus" because sometimes application just freezes, sometimes it loses focus and I'm unable to use it... weird stuff.
P.S.S. Changed title.
Last edited by daGrevis (2012-10-11 06:45:33)

So, as I understand it.... Haskell somehow conflicted w/ X11 when I did system upgrade.
Quick solution was to:
1. Remove Xmonad (xmonad, xmonad-contrib),
2. Try to remove Haskell (ghc),
3. Remove all needed packages that disallows to remove Haskell,
4. Remove Haskell,
5. Check that system still works (I tried to do things w/ TWM and system upgrade),
6. Put on any WM (I'm now using Awesome, but you can try to reinstall Xmonad as well (just follow all logs and stuff)).
Also, this fixed problem /w browser crashing.
P.S. Maybe this is just temporary solution, but for last 30 mins everything works /w problems.

I am unable to get tooltips in Firefox for my application though i am using title attribute.

I am unable to get tooltips in Firefox for my application though i am using title attribute.
I have even set the browser.chrome.toolbar_tips property to true. I am getting tooltips for all other sites except mine application.

Can you post the code that isn't working or a link to a website with that code?
Did you check for other elements covering that link?
* https://developer.mozilla.org/En/DOM_Inspector
* https://developer.mozilla.org/en/Introduction_to_DOM_Inspector
* DOM Inspector: https://addons.mozilla.org/firefox/addon/6622

I have just upgraded my Ipad to IOS 5 and I am unable to use my applications

I have just upgraded my Ipad to IOS 5 and I am unable to use my applications.
The applications appear in the screen, but when I tap on any one of them, they do not open.
Can some one tell me what to do to be able to use my application again?

Sorry, I'm reposting this because of spelling error in my previous post (I must turn that 'auto-correct' off).
Since I posted my questions, the only thing I figured out was to turn the 'iCloud' in the Settings on and now the plus sign is on and all my previous appointments appeared. While this is a solution, what if I don't want to use iCloud? But I'm happy for now that my Calendar works.

I am unable to use my external CD player. I am told that the player is being used by another application, and that is not true. I have quit everything and restarted. I've unplugged the unit. I have a fairly new mac mini 10.8. What can I do?

I am unable to use my external CD player. I have a fairly new mac mini 10.8. I am told that the player is being used by another application, but it's not true. I've forced everything to quit and restarted. I've even unplugged the unit and let it rest. I've turned off and unplugged the mac too. I cannot make a CD. Why?

I misread your message. I thought it said I did not have burn support with the Samsung hardware.
When the CD goes in it says You inserted a bland CD. choose an action from the popup menu or click ignore
open finder
open itunes
open disk utility
make this action the default
eject ignore ok
However, when I am making CDs. I am in itunes. That is where my recordings areI haven't tried to do it from this vantage point.
I don't know how to make a screen shot on a mac.
I go to my playlist and click on the little gear icon at the bottom left and I leave things as they are - preferred speed - maximum. I leave it on audio CD - and then I select BURN.
When I tried this the other day, I could not get it to burn, no matter how hard I tried - everything I could think of, using a different CD, force quitting everything I was not using, restarting the computer, unplugging the CD hardware and plugging it back in after a little while, nothing worked. I got that message that said my player was being used by another application every time I tried to make the CD. This took over an hour. I don't know of another way to make a CD on the mac; I was not using another program or application. Now it seems to be working fine. I am burning another copy of something I gave away.
I wish I knew what caused this. It was a real problem Saturday morning.

1st-I was able to log into my account but was not able to open any applications, tried another account and same thing. was able to log out and restart but now am unable to use mouse. g5 dual core

1st-I was able to log into my account but was not able to open any applications, tried another account and same thing. was able to log out and restart but now am unable to use mouse. g5 dual core, can't remember the os without seeing it.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Let us know how far you get, or results.

Applications :: Unable To Use Safari / Google Safe Browsing Service Unavailable

Applications :: Unable To Use Safari / Google Safe Browsing Service Unavailable

Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.
Thanks to leonie for some information contained in this.

Why am I unable to use the Adobe Send application

I am unable to fill in forms, add text or send a form, whereas I used to be able to do this. I have an Adobe Account with a User ID and password. Isn't Adobe a Certified Document Service?

mspacmn wrote:
Am I unable to use the text messaging feature on my 2014 Honda CRV with my Iphone 6?
Yes, you are unable to use text messaging feature with your iPhone.
-> http://owners.honda.com/vehicles/information/2014/CR-V/features/SMS-Text-Message -Function/3
"The system is currently compatible with select Blackberry® phones with Bluetooth"

[SOLVED] Gnome 3.8: Unable to use Nokia N9 as a Bluetooth modem

Hi,
I'm unable to use my Nokia Any ideas on how to fix this?
Here are some log files:
Bluetooth startup from everything.log:
/> bluetoothd[382]: Bluetooth daemon 4.101
bluetoothd[382]: Starting SDP server
bluetoothd[382]: DIS cannot start: GATT is disabled
bluetoothd[382]: Failed to init deviceinfo plugin
bluetoothd[382]: Failed to init gatt_example plugin
bluetoothd[382]: Bluetooth Management interface initialized
bluetoothd[382]: bluetoothd[382]: Bluetooth Management interface initialized
bluetoothd[382]: bluetoothd[382]: Unknown command complete for opcode 1J
bluetoothd[382]: Unknown command complete for opcode 19
bluetoothd[382]: bluetoothd[382]: Adapter /org/bluez/382/hci0 has been enabled
bluetoothd[382]: Adapter /org/bluez/382/hci0 has been enabled
entries from everything.log:
/etc/gdm/Xsession[612]: Ikkunointiohjelman varoitus:Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2800003 (Uuden Blue)
/etc/gdm/Xsession[612]: Ikkunointiohjelman varoitus:meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
bluetoothd[382]: bluetoothd[382]: Discovery session 0x7f5d47491d10 with :1.58 activated
bluetoothd[382]: Discovery session 0x7f5d47491d10 with :1.58 activated
bluetoothd[382]: bluetoothd[382]: Stopping discovery
bluetoothd[382]: Stopping discovery
kernel: [ 1179.820342] usb 2-1: reset high-speed USB device number 2 using ehci-pci
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 3 matched rules; type="method_return", sender=":1.58" (uid=1000 pid=1082 comm="bluetooth-wizard ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ")
bluetoothd[382]: bluetoothd[382]: input-headset driver probe failed for device 40:98:4E:65:A1:00
bluetoothd[382]: input-headset driver probe failed for device 40:98:4E:65:A1:00
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.AudioSource.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.AudioSource" doesn't exist
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.HandsfreeGateway.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.HandsfreeGateway" doesn't exist
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.HandsfreeGateway.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.HandsfreeGateway" doesn't exist
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 SyncMLClient
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 DialupNetworking
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXObjectPush
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXFileTransfer
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 AudioSource
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControlTarget
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControl
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Headset_-_AG
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 HandsfreeAudioGateway
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Phonebook_Access_-_PSE
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 SyncMLClient
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 DialupNetworking
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXObjectPush
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXFileTransfer
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 AudioSource
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControlTarget
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControl
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Headset_-_AG
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 HandsfreeAudioGateway
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Phonebook_Access_-_PSE
/etc/gdm/Xsession[612]: ** Message: Default Bluetooth adapter is powered
/etc/gdm/Xsession[612]: ** Message: dun_start: starting DUN device discovery...
/etc/gdm/Xsession[612]: ** Message: Tutkitaan puhelimen asetuksia…
/etc/gdm/Xsession[612]: ** Message: dun_start: calling Connect...
/etc/gdm/Xsession[612]: ** Message: dun_start: waiting for Connect success...
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: processing Connect reply
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: new rfcomm interface '/dev/rfcomm0'
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: finished
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
kernel: [ 1212.925984] Bluetooth: TIOCGSERIAL is not supported
kernel: [ 1214.790844] Bluetooth: TIOCGSERIAL is not supported
kernel: [ 1214.791357] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Creating modem with plugin 'Nokia' and '1' ports
kernel: [ 1215.816882] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3' successfully created
kernel: [ 1215.820679] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Modem: state changed (unknown -> disabled)
kernel: [ 1216.873341] Bluetooth: TIOCGSERIAL is not supported
/etc/gdm/Xsession[612]: ** Message: modem_object_added: (/org/freedesktop/ModemManager1/Modem/0) modem found
/etc/gdm/Xsession[612]: ** Message: start_wizard: (/org/freedesktop/ModemManager1/Modem/0) starting the mobile wizard
NetworkManager[387]: <info> ignoring modem 'rfcomm0' (no associated Bluetooth device)
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: mobile wizard done
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: adding new setting
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: waiting for add connection result...
NetworkManager[387]: <info> BT device Nokia N9 (40:98:4E:65:A1:00) added (DUN)
NetworkManager[387]: <info> (40:98:4E:65:A1:00): new Bluetooth device (driver: 'bluez' ifindex: 0)
NetworkManager[387]: <info> (40:98:4E:65:A1:00): exported as /org/freedesktop/NetworkManager/Devices/1
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): deactivating device (reason 'managed') [2]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
/etc/gdm/Xsession[612]: ** Message: Puhelimesi on nyt valmis käyttöön.
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/virtual/tty/rfcomm0
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.59" (uid=1000 pid=1082 comm="bluetooth-wizard ")
NetworkManager[387]: <info> (eth0): device state change: activated -> disconnected (reason 'user-requested') [100 30 39]
NetworkManager[387]: <info> (eth0): deactivating device (reason 'user-requested') [39]
avahi-daemon[392]: Withdrawing address record for 192.168.0.222 on eth0.
avahi-daemon[392]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.222.
avahi-daemon[392]: Interface eth0.IPv4 no longer relevant for mDNS.
dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
systemd[1]: Starting Network Manager Script Dispatcher Service...
dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
systemd[1]: Started Network Manager Script Dispatcher Service.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) starting connection 'Dna connection'
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: disconnected -> prepare (reason 'none') [30 40 0]
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) started...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) starting...
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: prepare -> config (reason 'none') [40 50 0]
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) complete.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00 40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) successful. Will connect via DUN.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) waiting for modem to appear.
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: config -> failed (reason 'modem-not-found') [50 120 43]
NetworkManager[387]: <warn> Activation (40:98:4E:65:A1:00) failed for connection 'Dna connection'
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: failed -> disconnected (reason 'none') [120 30 0]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): deactivating device (reason 'none') [0]
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/virtual/tty/rfcomm0
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 7 matched rules; type="method_return", sender=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.8" (uid=0 pid=387 comm="/usr/bin/NetworkManager --no-daemon ")
/> systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd-sysctl[132]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Coldplug all Devices.
systemd-modules-load[138]: Inserted module 'fuse'
systemd[1]: Started Create static device nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Mounted Debug File System.
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.9.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Sat Jun 8 09:22:45 CEST 2013
0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=90b0c2df-9b19-4c19-91ce-5479b086da4d ro quiet
0.000000] e820: BIOS-provided physical RAM map:
0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable
0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS
syslog-ng[390]: syslog-ng starting up; version='3.4.1'
systemd[1]: Mounted Huge Pages File System.
0.000000] BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data
0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable
0.000000] NX (Execute Disable) protection: active
0.000000] SMBIOS 2.4 present.
0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
0.000000] No AGP bridge found
0.000000] e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000
0.000000] MTRR default type: uncachable
0.000000] MTRR fixed ranges enabled:
0.000000] 00000-9FFFF write-back
0.000000] A0000-BFFFF uncachable
0.000000] C0000-C7FFF write-protect
0.000000] C8000-FFFFF uncachable
0.000000] MTRR variable ranges enabled:
0.000000] 0 base 000000000000 mask FFFF80000000 write-back
0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
0.000000] 4 base 000100000000 mask FFFF00000000 write-back
0.000000] 5 base 000200000000 mask FFFF00000000 write-back
0.000000] 6 base 000300000000 mask FFFFE0000000 write-back
0.000000] 7 base 000320000000 mask FFFFF0000000 write-back
0.000000] TOM2: 0000000330000000 aka 13056M
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
0.000000] found SMP MP-table at [mem 0x000f5440-0x000f544f] mapped at [ffff8800000f5440]
0.000000] Scanning 1 areas for low memory corruption
0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
0.000000] Using GB pages for direct mapping
0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
0.000000] [mem 0x00000000-0x000fffff] page 4k
0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
0.000000] init_memory_mapping: [mem 0x32fe00000-0x32fffffff]
0.000000] [mem 0x32fe00000-0x32fffffff] page 2M
0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
0.000000] init_memory_mapping: [mem 0x32c000000-0x32fdfffff]
0.000000] [mem 0x32c000000-0x32fdfffff] page 2M
0.000000] init_memory_mapping: [mem 0x300000000-0x32bffffff]
0.000000] [mem 0x300000000-0x32bffffff] page 2M
0.000000] init_memory_mapping: [mem 0x00100000-0xcfdeffff]
0.000000] [mem 0x00100000-0x001fffff] page 4k
0.000000] [mem 0x00200000-0x3fffffff] page 2M
0.000000] [mem 0x40000000-0xbfffffff] page 1G
0.000000] [mem 0xc0000000-0xcfbfffff] page 2M
0.000000] [mem 0xcfc00000-0xcfdeffff] page 4k
0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
0.000000] [mem 0x100000000-0x2ffffffff] page 1G
0.000000] RAMDISK: [mem 0x378a4000-0x37c49fff]
0.000000] ACPI: RSDP 00000000000f6e70 00014 (v00 GBT )
0.000000] ACPI: RSDT 00000000cfdf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: FACP 00000000cfdf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: DSDT 00000000cfdf30c0 0725F (v01 GBT GBTUACPI 00001000 MSFT 03000000)
0.000000] ACPI: FACS 00000000cfdf0000 00040
0.000000] ACPI: SSDT 00000000cfdfa400 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
0.000000] ACPI: HPET 00000000cfdfad00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
0.000000] ACPI: MCFG 00000000cfdfad40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: APIC 00000000cfdfa340 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] Scanning NUMA topology in Northbridge 24
0.000000] No NUMA configuration found
0.000000] Faking a node at [mem 0x0000000000000000-0x000000032fffffff]
0.000000] Initmem setup node 0 [mem 0x00000000-0x32fffffff]
0.000000] NODE_DATA [mem 0x32fff9000-0x32fffdfff]
0.000000] [ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880323600000-ffff88032f5fffff] on node 0
0.000000] Zone ranges:
0.000000] DMA [mem 0x00001000-0x00ffffff]
0.000000] DMA32 [mem 0x01000000-0xffffffff]
0.000000] Normal [mem 0x100000000-0x32fffffff]
0.000000] Movable zone start for each node
0.000000] Early memory node ranges
0.000000] node 0: [mem 0x00001000-0x0009efff]
0.000000] node 0: [mem 0x00100000-0xcfdeffff]
0.000000] node 0: [mem 0x100000000-0x32fffffff]
0.000000] On node 0 totalpages: 3145102
0.000000] DMA zone: 64 pages used for memmap
0.000000] DMA zone: 21 pages reserved
0.000000] DMA zone: 3998 pages, LIFO batch:0
0.000000] DMA32 zone: 13240 pages used for memmap
0.000000] DMA32 zone: 847344 pages, LIFO batch:31
0.000000] Normal zone: 35840 pages used for memmap
0.000000] Normal zone: 2293760 pages, LIFO batch:31
0.000000] ACPI: PM-Timer IO Port: 0x4008
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ2 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
0.000000] smpboot: Allowing 8 CPUs, 5 hotplug CPUs
0.000000] nr_irqs_gsi: 40
0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf3000
0.000000] PM: Registered nosave memory: 00000000cfdf3000 - 00000000cfe00000
0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
0.000000] PERCPU: Embedded 28 pages/cpu @ffff88032fc00000 s85824 r8192 d20672 u262144
0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095937
0.000000] Policy zone: Normal
0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=90b0c2df-9b19-4c19-91ce-5479b086da4d ro quiet
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] __ex_table already sorted, skipping sort
0.000000] Checking aperture...
0.000000] No AGP bridge found
0.000000] Node 0: aperture @ c4000000 size 32 MB
0.000000] Aperture pointing to e820 RAM. Ignoring.
0.000000] Your BIOS doesn't leave a aperture memory hole
0.000000] Please enable the IOMMU option in the BIOS setup
0.000000] This costs you 64 MB of RAM
0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
0.000000] Memory: 12235744k/13369344k available (4984k kernel code, 788936k absent, 344664k reserved, 3966k data, 1092k init)
0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
0.000000] Preemptible hierarchical RCU implementation.
0.000000] RCU dyntick-idle grace-period acceleration is enabled.
0.000000] Dump stacks of tasks blocking RCU-preempt GP.
0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
0.000000] NR_IRQS:4352 nr_irqs:744 16
0.000000] spurious 8259A interrupt: IRQ7.
0.000000] Console: colour dummy device 80x25
0.000000] console [tty0] enabled
0.000000] allocated 50331648 bytes of page_cgroup
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
0.000000] hpet clockevent registered
0.003333] tsc: Fast TSC calibration using PIT
0.006666] tsc: Detected 2812.672 MHz processor
0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5627.73 BogoMIPS (lpj=9375573)
0.000006] pid_max: default: 32768 minimum: 301
0.000035] Security Framework initialized
0.000041] AppArmor: AppArmor disabled by boot time parameter
0.000892] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
0.005505] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
0.007582] Mount-cache hash table entries: 256
0.007774] Initializing cgroup subsys cpuacct
0.007776] Initializing cgroup subsys memory
0.007786] Initializing cgroup subsys devices
0.007787] Initializing cgroup subsys freezer
0.007789] Initializing cgroup subsys net_cls
0.007790] Initializing cgroup subsys blkio
0.007813] tseg: 00cff00000
0.007816] CPU: Physical Processor ID: 0
0.007817] CPU: Processor Core ID: 0
0.007818] mce: CPU supports 6 MCE banks
0.007823] LVT offset 0 assigned for vector 0xf9
0.007828] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
0.007828] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
0.007828] tlb_flushall_shift: 4
0.007908] Freeing SMP alternatives: 20k freed
0.008523] ACPI: Core revision 20130117
0.010353] ACPI: All ACPI Tables successfully acquired
0.042664] ftrace: allocating 19546 entries in 77 pages
0.399338] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.432338] smpboot: CPU0: AMD Phenom(tm) II X3 720 Processor (fam: 10, model: 04, stepping: 02)
0.535738] Performance Events: AMD PMU driver.
0.535742] ... version: 0
0.535743] ... bit width: 48
0.535744] ... generic registers: 4
0.535745] ... value mask: 0000ffffffffffff
0.535746] ... max period: 00007fffffffffff
0.535746] ... fixed-purpose events: 0
0.535747] ... event mask: 000000000000000f
0.565797] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
0.572465] smpboot: Booting Node 0, Processors #1 #2
0.602275] Brought up 3 CPUs
0.602279] smpboot: Total of 3 processors activated (16882.19 BogoMIPS)
0.605948] devtmpfs: initialized
0.608503] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes)
0.609303] RTC time: 21:44:15, date: 06/16/13
0.609349] NET: Registered protocol family 16
0.609448] node 0 link 0: io port [b000, ffff]
0.609451] TOM: 00000000d0000000 aka 3328M
0.609453] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
0.609455] node 0 link 0: mmio [a0000, bffff]
0.609457] node 0 link 0: mmio [d0000000, dfffffff]
0.609459] node 0 link 0: mmio [f0000000, fe02ffff]
0.609460] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
0.609462] TOM2: 0000000330000000 aka 13056M
0.609464] bus: [bus 00-04] on node 0 link 0
0.609466] bus: 00 [io 0x0000-0xffff]
0.609467] bus: 00 [mem 0x000a0000-0x000bffff]
0.609468] bus: 00 [mem 0xd0000000-0xdfffffff]
0.609469] bus: 00 [mem 0xe0500000-0xffffffff]
0.609470] bus: 00 [mem 0xe0100000-0xe04fffff]
0.609471] bus: 00 [mem 0x330000000-0xfcffffffff]
0.609498] ACPI: bus type PCI registered
0.609552] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.609554] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
0.617921] PCI: Using configuration type 1 for base access
0.618123] mtrr: your CPUs had inconsistent variable MTRR settings
0.618124] mtrr: probably your BIOS does not setup all CPUs.
0.618125] mtrr: corrected configuration.
0.618516] bio: create slab <bio-0> at 0
0.618576] ACPI: Added _OSI(Module Device)
0.618577] ACPI: Added _OSI(Processor Device)
0.618578] ACPI: Added _OSI(3.0 _SCP Extensions)
0.618580] ACPI: Added _OSI(Processor Aggregator Device)
0.619096] ACPI: EC: Look up EC in DSDT
0.623380] ACPI: Interpreter enabled
0.623389] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
0.623394] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
0.623403] ACPI: (supports S0 S3 S4 S5)
0.623405] ACPI: Using IOAPIC for interrupt routing
0.623473] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.637118] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.637201] PCI host bridge to bus 0000:00
0.637204] pci_bus 0000:00: root bus resource [bus 00-ff]
0.637207] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
0.637209] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
0.637210] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
0.637212] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
0.637214] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
0.637223] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
0.637234] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
0.637312] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
0.637342] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
0.637366] pci 0000:00:02.0: System wakeup disabled by ACPI
0.637399] pci 0000:00:04.0: [1002:597a] type 01 class 0x060400
0.637428] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
0.637453] pci 0000:00:04.0: System wakeup disabled by ACPI
0.637485] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
0.637514] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
0.637542] pci 0000:00:0a.0: System wakeup disabled by ACPI
0.637581] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
0.637600] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
0.637609] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
0.637618] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
0.637627] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
0.637636] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
0.637645] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
0.637664] pci 0000:00:11.0: set SATA to AHCI mode
0.637736] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
0.637749] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
0.637811] pci 0000:00:12.0: System wakeup disabled by ACPI
0.637840] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
0.637853] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
0.637916] pci 0000:00:12.1: System wakeup disabled by ACPI
0.637948] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
0.637966] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
0.638046] pci 0000:00:12.2: supports D1 D2
0.638047] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
0.638065] pci 0000:00:12.2: System wakeup disabled by ACPI
0.638099] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
0.638112] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
0.638178] pci 0000:00:13.0: System wakeup disabled by ACPI
0.638205] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
0.638217] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
0.638282] pci 0000:00:13.1: System wakeup disabled by ACPI
0.638316] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
0.638334] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
0.638414] pci 0000:00:13.2: supports D1 D2
0.638415] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
0.638436] pci 0000:00:13.2: System wakeup disabled by ACPI
0.638472] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
0.638587] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
0.638602] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
0.638611] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
0.638620] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
0.638629] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
0.638638] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
0.638722] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
0.638743] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
0.638806] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
0.638830] pci 0000:00:14.2: System wakeup disabled by ACPI
0.638857] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
0.638963] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
0.639012] pci 0000:00:14.4: System wakeup disabled by ACPI
0.639040] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
0.639053] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
0.639119] pci 0000:00:14.5: System wakeup disabled by ACPI
0.639151] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
0.639203] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
0.639254] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
0.639305] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
0.639358] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
0.639454] pci 0000:01:00.0: [1002:94b3] type 00 class 0x030000
0.639466] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
0.639475] pci 0000:01:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit]
0.639482] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
0.639493] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
0.639520] pci 0000:01:00.0: supports D1 D2
0.639554] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
0.639566] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
0.639616] pci 0000:01:00.1: supports D1 D2
0.648955] pci 0000:00:02.0: PCI bridge to [bus 01]
0.648960] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
0.648963] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
0.648966] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.649016] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
0.649081] pci 0000:02:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]
0.649130] pci 0000:02:00.0: PME# supported from D3hot
0.649179] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
0.649197] pci 0000:02:00.1: reg 10: [io 0xdf00-0xdf07]
0.649207] pci 0000:02:00.1: reg 14: [io 0xde00-0xde03]
0.649217] pci 0000:02:00.1: reg 18: [io 0xdd00-0xdd07]
0.649227] pci 0000:02:00.1: reg 1c: [io 0xdc00-0xdc03]
0.649237] pci 0000:02:00.1: reg 20: [io 0xdb00-0xdb0f]
0.649319] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
0.649326] pci 0000:00:04.0: PCI bridge to [bus 02]
0.649329] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
0.649331] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
0.649334] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.649377] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
0.649389] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
0.649408] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
0.649421] pci 0000:03:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
0.649430] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
0.649474] pci 0000:03:00.0: supports D1 D2
0.649475] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
0.658954] pci 0000:00:0a.0: PCI bridge to [bus 03]
0.658959] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
0.658961] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
0.658964] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
0.659008] pci 0000:04:06.0: [1131:7146] type 00 class 0x048000
0.659025] pci 0000:04:06.0: reg 10: [mem 0xfdbff000-0xfdbff1ff]
0.659127] pci 0000:04:07.0: [9710:9805] type 00 class 0x078000
0.659143] pci 0000:04:07.0: reg 10: [io 0xbf00-0xbf07]
0.659155] pci 0000:04:07.0: reg 14: [io 0xbe00-0xbe07]
0.659167] pci 0000:04:07.0: reg 18: [io 0xbd00-0xbd07]
0.659179] pci 0000:04:07.0: reg 1c: [io 0xbc00-0xbc07]
0.659190] pci 0000:04:07.0: reg 20: [io 0xbb00-0xbb07]
0.659202] pci 0000:04:07.0: reg 24: [io 0xba00-0xba0f]
0.659264] pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010
0.659286] pci 0000:04:0e.0: reg 10: [mem 0xfdbfe000-0xfdbfe7ff]
0.659298] pci 0000:04:0e.0: reg 14: [mem 0xfdbf8000-0xfdbfbfff]
0.659387] pci 0000:04:0e.0: supports D1 D2
0.659389] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
0.659445] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
0.659449] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
0.659453] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
0.659457] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
0.659458] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
0.659460] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
0.659462] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
0.659463] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
0.659465] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
0.659479] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
0.659481] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
0.659908] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.659945] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.659979] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660012] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660078] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660111] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660144] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660468] acpi root: \_SB_.PCI0 notify handler is installed
0.660494] Found 1 acpi root devices
0.660564] ACPI: No dock devices found.
0.660640] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
0.660643] vgaarb: loaded
0.660644] vgaarb: bridge control possible 0000:01:00.0
0.660676] PCI: Using ACPI for IRQ routing
0.668997] PCI: pci_cache_line_size set to 64 bytes
0.669004] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
0.669070] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
0.669071] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff]
0.669150] NetLabel: Initializing
0.669151] NetLabel: domain hash size = 128
0.669152] NetLabel: protocols = UNLABELED CIPSOv4
0.669161] NetLabel: unlabeled traffic allowed by default
0.669177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
0.669180] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
0.671205] Switching to clocksource hpet
0.674983] pnp: PnP ACPI init
0.674994] ACPI: bus type PNP registered
0.675058] system 00:00: [io 0x04d0-0x04d1] has been reserved
0.675060] system 00:00: [io 0x0220-0x0225] has been reserved
0.675062] system 00:00: [io 0x0290-0x0294] has been reserved
0.675065] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
0.675512] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.675535] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
0.675543] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
0.675575] system 00:01: [io 0x4100-0x411f] has been reserved
0.675578] system 00:01: [io 0x0228-0x022f] has been reserved
0.675580] system 00:01: [io 0x040b] has been reserved
0.675581] system 00:01: [io 0x04d6] has been reserved
0.675583] system 00:01: [io 0x0c00-0x0c01] has been reserved
0.675585] system 00:01: [io 0x0c14] has been reserved
0.675586] system 00:01: [io 0x0c50-0x0c52] has been reserved
0.675588] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
0.675589] system 00:01: [io 0x0c6f] has been reserved
0.675591] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
0.675593] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
0.675594] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
0.675596] system 00:01: [io 0x4000-0x40fe] has been reserved
0.675597] system 00:01: [io 0x4210-0x4217] has been reserved
0.675599] system 00:01: [io 0x0b00-0x0b0f] has been reserved
0.675601] system 00:01: [io 0x0b10-0x0b1f] has been reserved
0.675602] system 00:01: [io 0x0b20-0x0b3f] has been reserved
0.675604] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
0.675608] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
0.675676] pnp 00:02: [dma 4]
0.675693] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
0.675740] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
0.675772] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
0.675791] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
0.675815] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
0.676004] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
0.676006] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
0.676106] pnp 00:08: disabling [mem 0x000cfe00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676108] pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676110] pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676112] pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676114] pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676117] pnp 00:08: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676153] system 00:08: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
0.676155] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
0.676157] system 00:08: [mem 0xcfe00000-0xcfefffff] has been reserved
0.676159] system 00:08: [mem 0xcff00000-0xcfffffff] could not be reserved
0.676161] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
0.676162] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
0.676164] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
0.676166] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
0.676180] pnp: PnP ACPI: found 9 devices
0.676182] ACPI: bus type PNP unregistered
0.682550] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
0.682553] pci 0000:00:02.0: PCI bridge to [bus 01]
0.682556] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
0.682558] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
0.682561] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.682564] pci 0000:00:04.0: PCI bridge to [bus 02]
0.682566] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
0.682568] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
0.682570] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.682574] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
0.682575] pci 0000:00:0a.0: PCI bridge to [bus 03]
0.682577] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
0.682579] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
0.682582] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
0.682585] pci 0000:00:14.4: PCI bridge to [bus 04]
0.682587] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
0.682592] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
0.682595] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
0.682771] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
0.682772] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
0.682774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
0.682775] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
0.682777] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
0.682779] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
0.682780] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
0.682782] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
0.682784] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
0.682785] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
0.682787] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.682788] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
0.682790] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
0.682791] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
0.682793] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
0.682795] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
0.682796] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
0.682798] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
0.682799] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]

I managed to get my wired connection back and updated my system. After that (and a reboot), NetworkManager started to mysteriously work.
Here are the relevant parts from journald's log:
kesä 17 17:47:40 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:47:40 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:47:40 sunnydale systemd[1]: Starting Network Manager Script Dispatcher Service...
kesä 17 17:47:40 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:47:40 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:47:40 sunnydale systemd[1]: Started Network Manager Script Dispatcher Service.
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) starting connection 'dna internet connection'
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: disconnected -> prepare (reason 'none') [30 40 0]
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.388835] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) scheduled...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) started...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) scheduled...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) complete.
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) starting...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: prepare -> config (reason 'none') [40 50 0]
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.390823] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.398034] [nm-device-bt.c:947] act_stage2_config(): (40:98:4E:65:A1:00): requesting connection to the device
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) complete.
kesä 17 17:47:52 sunnydale NetworkManager[387]: <debug> [1371480472.813677] [nm-device-bt.c:836] bluez_property_changed(): (40:98:4E:65:A1:00): bluez property 'Connected' changed to 'true'
kesä 17 17:47:52 sunnydale NetworkManager[387]: <debug> [1371480472.813775] [nm-device-bt.c:846] bluez_property_changed(): (40:98:4E:65:A1:00): connected to the device
kesä 17 17:47:53 sunnydale NetworkManager[387]: <debug> [1371480473.67585] [nm-device-bt.c:808] bluez_connect_cb(): (40:98:4E:65:A1:00): connect request successful
kesä 17 17:47:53 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00 40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) successful. Will connect via DUN.
kesä 17 17:47:53 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) waiting for modem to appear.
kesä 17 17:47:53 sunnydale upowerd[518]: (upowerd:518): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb4/4-3/4-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
kesä 17 17:47:53 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:54 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:54 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:56 sunnydale ModemManager[390]: <info> Creating modem with plugin 'Nokia' and '1' ports
kesä 17 17:47:56 sunnydale ModemManager[390]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:13.1/usb4/4-3' successfully created
kesä 17 17:47:56 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:56 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem: state changed (unknown -> disabled)
kesä 17 17:47:57 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) modem found.
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect started...
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (3/8): Enable
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
kesä 17 17:47:57 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> enabled)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (4/8): Wait to get fully enabled
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (5/8): Register
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (6/8): Bearer
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'enabling' --> 'enabled' (reason: user-requested)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (7/8): Connect
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabled -> connecting)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'enabled' --> 'connecting' (reason: user-requested)
kesä 17 17:47:57 sunnydale ModemManager[390]: <warn> Couldn't load Operator Name: 'Unknown error'
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP location updated (MCC: '0', MNC: '0', Location area code: 'A1', Cell ID: '10C654')
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (8/8): All done
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <warn> (rfcomm0): failed to look up interface index
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987235] [nm-device.c:3066] nm_device_activate_schedule_stage3_ip_config_start(): Activation (40:98:4E:65:A1:00) setting firewall zone 'default'
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987260] [nm-firewall-manager.c:107] nm_firewall_manager_add_or_change_zone(): (rfcomm0) firewall zone add/change skipped (not running)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) scheduled.
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) started...
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: config -> ip-config (reason 'none') [50 70 0]
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987628] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> using modem-specified IP timeout: 20 seconds
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> starting PPP connection
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.988323] [nm-ppp-manager.c:1068] nm_ppp_manager_start(): command line: /usr/sbin/pppd nodetach lock nodefaultroute ipv6 , debug rfcomm0 noipdefault noauth usepeerdns lcp-echo-failure 0 lcp-echo-interval 0 ipparam /org/freedesktop/NetworkManager/PPP/0 plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> pppd started with pid 914
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) complete.
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) started...
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) complete.
kesä 17 17:47:58 sunnydale pppd[914]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
kesä 17 17:47:58 sunnydale NetworkManager[387]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
kesä 17 17:47:58 sunnydale kernel: PPP generic driver version 2.4.2
kesä 17 17:47:58 sunnydale pppd[914]: pppd 2.4.5 started by root, uid 0
kesä 17 17:47:58 sunnydale pppd[914]: using channel 1
kesä 17 17:47:58 sunnydale pppd[914]: Using interface ppp0
kesä 17 17:47:58 sunnydale pppd[914]: Connect: ppp0 <--> /dev/rfcomm0
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: <debug> [1371480478.113258] [nm-netlink-monitor.c:164] link_msg_handler(): netlink link message: iface idx 3 flags 0x1090
kesä 17 17:47:58 sunnydale NetworkManager[387]: using channel 1
kesä 17 17:47:58 sunnydale NetworkManager[387]: Using interface ppp0
kesä 17 17:47:58 sunnydale NetworkManager[387]: Connect: ppp0 <--> /dev/rfcomm0
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale systemd-sysctl[922]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
kesä 17 17:47:58 sunnydale NetworkManager[387]: <debug> [1371480478.116359] [nm-udev-manager.c:568] handle_uevent(): UDEV event: action 'add' subsys 'net' device 'ppp0'
kesä 17 17:47:58 sunnydale NetworkManager[387]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring...
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfRej id=0x1 <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfRej id=0x1 <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfAck id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfAck id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [PAP AuthReq id=0x1 user="" password=<hidden>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [PAP AuthReq id=0x1 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [PAP AuthReq id=0x2 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [PAP AuthReq id=0x2 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [PAP AuthAck id=0x2 ""]
kesä 17 17:48:01 sunnydale pppd[914]: PAP authentication succeeded
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [PAP AuthAck id=0x2 ""]
kesä 17 17:48:01 sunnydale NetworkManager[387]: PAP authentication succeeded
kesä 17 17:48:01 sunnydale kernel: PPP BSD Compression module registered
kesä 17 17:48:01 sunnydale pppd[914]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale kernel: PPP Deflate Compression module registered
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
kesä 17 17:48:01 sunnydale pppd[914]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
kesä 17 17:48:01 sunnydale NetworkManager[387]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x0 <addr fe80::0000:0000:0000:0000>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfNak id=0x0 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x0 <addr fe80::0000:0000:0000:0000>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfNak id=0x0 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfNak id=0x2 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfReq id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfNak id=0x2 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfAck id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: Cannot determine ethernet address for proxy ARP
kesä 17 17:48:03 sunnydale pppd[914]: local IP address 10.241.96.30
kesä 17 17:48:03 sunnydale pppd[914]: remote IP address 10.6.6.6
kesä 17 17:48:03 sunnydale pppd[914]: primary DNS address 62.241.198.245
kesä 17 17:48:03 sunnydale pppd[914]: secondary DNS address 62.241.198.246
kesä 17 17:48:03 sunnydale pppd[914]: Script /etc/ppp/ip-up started (pid 928)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.851617] [nm-netlink-monitor.c:164] link_msg_handler(): netlink link message: iface idx 3 flags 0x110D1
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> PPP manager(IP Config Get) reply received.
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Commit) started...
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.852986] [nm-system.c:194] sync_addresses(): (ppp0): syncing addresses (family 2)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.853021] [nm-system.c:247] sync_addresses(): (ppp0): removing address '10.241.96.30/32'
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfAck id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: Cannot determine ethernet address for proxy ARP
kesä 17 17:48:03 sunnydale NetworkManager[387]: local IP address 10.241.96.30
kesä 17 17:48:03 sunnydale NetworkManager[387]: remote IP address 10.6.6.6
kesä 17 17:48:03 sunnydale NetworkManager[387]: primary DNS address 62.241.198.245
kesä 17 17:48:03 sunnydale NetworkManager[387]: secondary DNS address 62.241.198.246
kesä 17 17:48:03 sunnydale NetworkManager[387]: Script /etc/ppp/ip-up started (pid 928)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.853775] [nm-system.c:280] sync_addresses(): (ppp0): adding address '10.241.96.30/0'
kesä 17 17:48:03 sunnydale pppd[914]: Script /etc/ppp/ip-up finished (pid 928), status = 0x2
kesä 17 17:48:03 sunnydale NetworkManager[387]: Script /etc/ppp/ip-up finished (pid 928), status = 0x2
kesä 17 17:48:04 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:04 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855173] [nm-netlink-utils.c:356] dump_route(): route idx 3 family INET (2) addr 10.6.6.6/32
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855250] [nm-netlink-utils.c:356] dump_route(): route idx 3 family INET (2) addr 10.241.96.30/32
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855608] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (device_ip4_config_changed): queueing DNS updates (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855649] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration did not change
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855666] [nm-dns-manager.c:1017] nm_dns_manager_end_updates(): (device_ip4_config_changed): no DNS changes to commit (0)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855795] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.858147] [nm-device.c:5244] nm_device_queue_state(): (40:98:4E:65:A1:00): queued state change to activated (id 252)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.858200] [nm-device.c:5174] nm_device_state_changed(): (40:98:4E:65:A1:00): device entered SECONDARIES state
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Commit) complete.
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.870449] [nm-device.c:5202] queued_set_state(): (40:98:4E:65:A1:00): running queued state change to activated (id 252)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: secondaries -> activated (reason 'none') [90 100 0]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.872130] [nm-manager.c:591] manager_device_state_changed(): (40:98:4E:65:A1:00): triggered connectivity check due to state change
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.873625] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (device_state_changed): queueing DNS updates (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.873683] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (update_routing_and_dns): queueing DNS updates (2)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Policy set 'dna internet connection' (ppp0) as default for IPv4 routing and DNS.
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874320] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration changed
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874341] [nm-dns-manager.c:1017] nm_dns_manager_end_updates(): (update_routing_and_dns): no DNS changes to commit (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874368] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration changed
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874383] [nm-dns-manager.c:1022] nm_dns_manager_end_updates(): (device_state_changed): committing DNS changes (0)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874399] [nm-dns-manager.c:591] update_dns(): updating resolv.conf
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) successful, device activated.
kesä 17 17:48:04 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:48:04 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:48:04 sunnydale systemd[1]: Starting Network Manager Script Dispatcher Service...
kesä 17 17:48:04 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:48:04 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:48:04 sunnydale systemd[1]: Started Network Manager Script Dispatcher Service.
kesä 17 17:48:07 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:07 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:10 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:10 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:13 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:13 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:16 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:16 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:19 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:19 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:21 sunnydale /etc/gdm/Xsession[622]: (process:953): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed
kesä 17 17:48:22 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:22 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:CurrentTime used to choose focus window; focus window may not be correct.
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Got a request to focus 0x2200006 (jussi@sunn) with a timestamp of 0. This shouldn't happen!
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:CurrentTime used to choose focus window; focus window may not be correct.
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
kesä 17 17:48:25 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:25 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:28 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:28 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:31 sunnydale pppd[914]: IPV6CP: timeout sending Config-Requests
kesä 17 17:48:31 sunnydale NetworkManager[387]: IPV6CP: timeout sending Config-Requests
kesä 17 17:49:41 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
kesä 17 17:49:41 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
kesä 17 17:49:41 sunnydale systemd[1]: Starting Hostname Service...
kesä 17 17:49:41 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.hostname1'
kesä 17 17:49:41 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.hostname1'
kesä 17 17:49:41 sunnydale systemd[1]: Started Hostname Service.
kesä 17 17:49:43 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Log level 8: meta_window_raise: assertion `!window->override_redirect' failed
kesä 17 17:49:44 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Log level 8: meta_window_lower: assertion `!window->override_redirect' failed
And here is log about the updates I made:
[2013-06-17 17:01] [PACMAN] Running 'pacman -Syu'
[2013-06-17 17:01] [PACMAN] synchronizing package lists
[2013-06-17 17:01] [PACMAN] starting full system upgrade
[2013-06-17 17:04] [PACMAN] Running 'pacman -S --asdeps polkit'
[2013-06-17 17:04] [PACMAN] upgraded polkit (0.110-2 -> 0.111-1)
[2013-06-17 17:24] [PACMAN] Running 'pacman -U --asdeps lib32-polkit-0.111-1-x86_64.pkg.tar.xz'
[2013-06-17 17:24] [PACMAN] upgraded lib32-polkit (0.110-2 -> 0.111-1)
[2013-06-17 17:27] [PACMAN] Running 'pacman -S --asdeps libxkbcommon'
[2013-06-17 17:27] [PACMAN] upgraded libxkbcommon (0.3.0-1 -> 0.3.1-1)
[2013-06-17 17:28] [PACMAN] Running 'pacman -U --asdeps lib32-libxkbcommon-0.3.1-1-x86_64.pkg.tar.xz'
[2013-06-17 17:28] [PACMAN] upgraded lib32-libxkbcommon (0.3.0-1 -> 0.3.1-1)
[2013-06-17 17:28] [PACMAN] Running 'pacman -Syu'
[2013-06-17 17:28] [PACMAN] synchronizing package lists
[2013-06-17 17:28] [PACMAN] starting full system upgrade
[2013-06-17 17:33] [PACMAN] removed lib32-dbus-core (1.6.10-1)
[2013-06-17 17:33] [PACMAN] upgraded attr (2.4.46-2 -> 2.4.47-1)
[2013-06-17 17:33] [PACMAN] upgraded acl (2.2.51-3 -> 2.2.52-1)
[2013-06-17 17:33] [PACMAN] upgraded attica (0.4.1-2 -> 0.4.2-1)
[2013-06-17 17:33] [PACMAN] upgraded cups-pk-helper (0.2.4-1 -> 0.2.5-1)
[2013-06-17 17:33] [PACMAN] upgraded dbus (1.6.10-1 -> 1.6.12-1)
[2013-06-17 17:33] [PACMAN] upgraded dosfstools (3.0.17-1 -> 3.0.20-1)
[2013-06-17 17:33] [PACMAN] upgraded gtk-update-icon-cache (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded gtk2 (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded flashplugin (11.2.202.285-1 -> 11.2.202.291-1)
[2013-06-17 17:33] [PACMAN] upgraded libgdm (3.8.1.1-2 -> 3.8.3-1)
[2013-06-17 17:33] [ALPM] warning: directory permissions differ on /var/log/gdm/
filesystem: 711 package: 1770
[2013-06-17 17:33] [PACMAN] upgraded gdm (3.8.1.1-2 -> 3.8.3-1)
[2013-06-17 17:33] [PACMAN] upgraded geoip-database (20130514-1 -> 20130607-1)
[2013-06-17 17:33] [PACMAN] upgraded git (1.8.3-1 -> 1.8.3.1-1)
[2013-06-17 17:33] [PACMAN] upgraded glib2 (2.36.2-1 -> 2.36.3-2)
[2013-06-17 17:33] [PACMAN] upgraded xkeyboard-config (2.9-1 -> 2.9-2)
[2013-06-17 17:33] [PACMAN] upgraded iso-codes (3.41-1 -> 3.43-1)
[2013-06-17 17:33] [PACMAN] upgraded gnome-desktop (1:3.8.3-1 -> 1:3.8.3-2)
[2013-06-17 17:33] [PACMAN] upgraded gnome-user-docs (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:33] [PACMAN] upgraded graphite (1:1.2.2-1 -> 1:1.2.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-afc (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-goa (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [ALPM-SCRIPTLET] Users no longer need to be in the 'camera' group to use camera devices
[2013-06-17 17:33] [PACMAN] upgraded libgphoto2 (2.5.1-1 -> 2.5.2-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-gphoto2 (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-mtp (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-obexftp (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-smb (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded hwids (20130512-1 -> 20130607-1)
[2013-06-17 17:33] [PACMAN] upgraded jre7-openjdk-headless (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded jre7-openjdk (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded jdk7-openjdk (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded json-c (0.10-2 -> 0.11-1)
[2013-06-17 17:33] [PACMAN] upgraded krb5 (1.11.2-4 -> 1.11.3-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-attr (2.4.46-2 -> 2.4.47-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-acl (2.2.51-2 -> 2.2.52-1)
[2013-06-17 17:33] [PACMAN] installed lib32-dbus (1.6.12-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-gtk2 (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-json-c (0.10-2 -> 0.11-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-krb5 (1.11.2-1 -> 1.11.3-1)
[2013-06-17 17:33] [PACMAN] upgraded libpulse (4.0-1 -> 4.0-2)
[2013-06-17 17:33] [PACMAN] upgraded lib32-libpulse (4.0-1 -> 4.0-2)
[2013-06-17 17:33] [PACMAN] upgraded libxrender (0.9.7-1 -> 0.9.8-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-libxrender (0.9.7-1 -> 0.9.8-1)
[2013-06-17 17:33] [PACMAN] upgraded libbsd (0.4.2-1 -> 0.5.2-1)
[2013-06-17 17:33] [PACMAN] upgraded libmbim (1.0.0-1 -> 1.2.0-1)
[2013-06-17 17:33] [PACMAN] upgraded libnautilus-extension (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:33] [PACMAN] upgraded libpipeline (1.2.3-1 -> 1.2.4-1)
[2013-06-17 17:33] [PACMAN] upgraded libquvi-scripts (0.4.14-1 -> 0.4.15-1)
[2013-06-17 17:33] [PACMAN] upgraded libusb-compat (0.1.4-2 -> 0.1.5-1)
[2013-06-17 17:33] [PACMAN] upgraded libxvmc (1.0.7-1 -> 1.0.8-1)
[2013-06-17 17:33] [PACMAN] upgraded link-grammar (4.7.11-1 -> 4.7.12-1)
[2013-06-17 17:33] [PACMAN] upgraded linux-firmware (20130528-1 -> 20130610-1)
[2013-06-17 17:33] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-06-17 17:33] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Starting build: 3.9.6-1-ARCH
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Starting build: 3.9.6-1-ARCH
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-17 17:33] [PACMAN] upgraded linux (3.9.5-1 -> 3.9.6-1)
[2013-06-17 17:33] [PACMAN] upgraded linux-headers (3.9.5-1 -> 3.9.6-1)
[2013-06-17 17:33] [PACMAN] upgraded lirc-utils (1:0.9.0-46 -> 1:0.9.0-47)
[2013-06-17 17:33] [PACMAN] upgraded mime-types (8-1 -> 9-1)
[2013-06-17 17:33] [ALPM] warning: extracting /usr/share/applications/nautilus.desktop as /usr/share/applications/nautilus.desktop.pacnew
[2013-06-17 17:33] [ALPM] warning: extracting /usr/share/applications/nautilus-autorun-software.desktop as /usr/share/applications/nautilus-autorun-software.desktop.pacnew
[2013-06-17 17:34] [PACMAN] upgraded nautilus (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:34] [PACMAN] upgraded p7zip (9.20.1-6 -> 9.20.1-7)
[2013-06-17 17:34] [ALPM] warning: /etc/ppp/ip-down.d/00-dns.sh installed as /etc/ppp/ip-down.d/00-dns.sh.pacnew
[2013-06-17 17:34] [ALPM] warning: /etc/ppp/ip-up.d/00-dns.sh installed as /etc/ppp/ip-up.d/00-dns.sh.pacnew
[2013-06-17 17:34] [PACMAN] upgraded ppp (2.4.5-6 -> 2.4.5-7)
[2013-06-17 17:34] [ALPM-SCRIPTLET] >>> If you have per-user copies of configuration files (such as client.conf,
[2013-06-17 17:34] [ALPM-SCRIPTLET] daemon.conf or default.pa) in ~/.pulse/, make sure you keep them in sync
[2013-06-17 17:34] [ALPM-SCRIPTLET] with changes to the packaged files in /etc/pulse/. Otherwise, PulseAudio
[2013-06-17 17:34] [ALPM-SCRIPTLET] may refuse to start due to configuration errors.
[2013-06-17 17:34] [PACMAN] upgraded pulseaudio (4.0-1 -> 4.0-2)
[2013-06-17 17:34] [PACMAN] upgraded python-dbus-common (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded python-dbus (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded python2-dbus (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded sdparm (1.07-1 -> 1.08-1)
[2013-06-17 17:34] [PACMAN] upgraded sg3_utils (1.35-1 -> 1.36-1)
[2013-06-17 17:34] [PACMAN] upgraded shared-desktop-ontologies (0.10.0-1 -> 0.11.0-1)
[2013-06-17 17:34] [PACMAN] upgraded subversion (1.7.9-6 -> 1.7.10-1)
[2013-06-17 17:34] [PACMAN] upgraded sudo (1.8.6.p8-2 -> 1.8.7-1)
[2013-06-17 17:34] [PACMAN] upgraded syslog-ng (3.4.1-3 -> 3.4.2-1)
[2013-06-17 17:34] [PACMAN] upgraded usbutils (006-1 -> 007-1)
[2013-06-17 17:34] [PACMAN] upgraded webkitgtk (2.0.2-3 -> 2.0.3-1)
[2013-06-17 17:34] [PACMAN] upgraded wine (1.6rc1-1 -> 1.6rc2-1)
I'm marking this thread solved for now. If the problem arises again, I'll reopen it.

Help. Windows 7: The application was unable to start correctly (0xc0150002).

I just got a new computer. Windows 7. Toshiba. Intel 13-3110M Processor. 6GB DDR3 Memory. 1TB 5400rpm Hard Drive. Intel HD Graphics 4000. 2.40 GHz. 64-bit operating system.
I installed CS5 Creative Suite on it (which worked perfectly fine on my two previous computers--Windows 7 and Windows 8). Since then Photoshop and Illustrator have been giving me the same error message. "The application was unable to start correctly (0xc0150002). Click OK to close the application." The programs still open and remain open after pressing okay, but the message comes back every minute or so.
Then, with InDesign, the program won't open at all. It gives me the error message of "Cannot load the PDF.RPLN plug-in. It is dependent on the EPS PAGE ITEM.RPLN plug-in, which failed to load. Please check documentation for the EPS PAGE ITEM.RPLN plug-in." Then InDesign stops responding and closes itself.
I have to live with this computer for two more weeks (and then I go home and can use my old one again/return this current laptop), and I have schoolwork that counts on me being able to use these programs. If anybody could help me, I would be super grateful!
Oh, and I've already tried installing and uninstalling it.

Without system information nobody can say anything. also check the logs in the Event Viewer.
Mylenium

Application was unable to load database

I have a RoboHelp 9 project that I left open on my computer overnight and microsoft updates ran causing my computer to restart. When I try to open my RoboHelp 9 project, i get the following error:
Open project was cancelled or the application was unable to load database for "C:\CODE\HELP\HELP.CPD"
How can I correct the CPD file without starting over?

Hi there
Just delete the CPD and re-open the project. When RoboHelp sees it missing, it will bake up a fresh one to use and all should then be well.
Cheers... Rick

"open project was cancelled or the application was unable to load database for..."

I'm doing a project for my Professional Writing course and I
have to use RoboHelp to create an online help document. The
professor provided templates for us to use but when I go to open
the project file I get the following error: "open project was
cancelled or the application was unable to load database
for....(then the directory)"
I know the project file isn't corrupted because the members
of my class are using the same one without issue. I tried
re-downloading the file, I also re-installed the program itself,
still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
The only other suggestions I have seen are that I don't have
edit perms for the system, but it's my personal laptop and I have
full admin privs. I thought at first that the folder was read-only,
but when I opened it up all it displays is the little green box in
the checkbox (which doesn't mean the folder is read-only, it's just
some stupid windows default, it's only read-only if the box is
actually checked). I tried making the entire directory read-only
and then turn it off but still get the same error.
Any suggestions?

There's a topic on my site about Opening Projects that
includes the method of deleting the CPD and XPJ files but I didn't
cover that as the project is good for everyone else. Anything is
worth a try at the moment though.
Another thing to try is to rename the course folder, then
create a new folder with the same name plus all sub folders. Then
move the files across. That will ensure the folder properties are
good and not read only. Yes I know what you said but again anything
is worth a try.
Also, in the last post you are saying the directory is not
read-only. I assume the files are all good?
Ref my previous post, is it the case that now you are getting
an error before the original error would have popped up?

Applications freezing - unable to use

Similar Messages

Maybe you are looking for