Applications image missing

Earlier i accidentally deleted my applications folder from my dock. i went onto finder and dragged it onto dock and that worked, but the image that i used to have for applications is missing and now my applications image is displayed as the address book (which is the first application in the file).
How can i get it back?

Okay that worked. Thanks

Similar Messages

  • Captured images missing installed applications

    Greetings,
    I am using MDT 2013 to capture an image of a reference computer that has Windows 8.1 installed, along with several additional applications.  When I deploy the captured image with a new task sequence set up for that purpose, the applications are
    missing.  This is not a matter of the shortcuts being gone; they do not exist in the their respective Program Files folders either, and do not appear in the Programs and Features list.
    I have verified that I'm using the captured image, and captured the reference image again (from a Hyper-V VM) just to be sure.  My understanding was that sysprep & capture did not remove applications, just data that's unique to users and the machine. 
    Thank you in advance for any help.

    Problem solved.  After updating the deployment share, I had forgotten to replace the boot image within WDS. 

  • Applications folder missing from Dock and Finder

    I was a little confused to find my applications folder missing from the Dock on my Macbook Pro today - I can't think of anything which I may have done to actively cause it to go missing. I opened up the finder and dragged the applications icon from the LHS of the finder onto the RHS of the dock, but rather than reappearing in the doc it just disappeared.
    When I went back to the finder to try again I discovered that it had vanished from there as well. I ran a search in the finder for "applications" and found the applications folder in the results, but when I try to open it I get the following error message "The alias “Applications” can’t be opened because the original item can’t be found."
    Does anyone have any ideas on what might have caused this or on how I get my Applications folder back on the Dock? Any help would be really appreciated!

    The Applications folder on the dock is a shortcut, or more specifically, an alias.
    It sounds like what you did was to drag the Applications item from the Finder sidebar...which is also an alias. By dragging it from the sidebar, it's as if you'd dragged an icon off the dock. It poofs and disappears.
    To get them back, open a Finder window and navigate to Macintosh HD (or whatever you've named your hard drive). At the root level of the drive lives your Applications folder (the actual folder, not an alias). Drag that one to the sidebar to replace that shortcut, and drag it again to the Dock to replace that shortcut as well.
    If you click on Macintosh HD and all you see are System, Library, and Users and have no Applications folder, then something terrible has happened.

  • I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

    I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

    Thanks Paul; but, taking your suggestion didn't solve the problem.  As mail is part of the OS, the updates don't have the capacity to reinstall applications; so, I had to reinstall the OS.  I now have my mail back (although it didn't appear on the dock--I had to go to applications and activate it and then put it back in the dock.  Thanks again for trying.

  • How do i insert a splash screen or a loading screen and a application image for a phone app on Dream

    How do i insert a splash screen or a loading screen and a application image for a phone app on Dreamweaver 6, 5.5 had the mobile application setting that is seemingly no longer present? and i also heard you can use animanted backgrounds on the mobile application in dreamweaver 6 but figuring out how to set the splash screen and application image like it was in 5.5 would be nice. All i can get to pull up is the web application i developed i am trying to build into a phone app on google chrome, if i could officially designate it as a phone app where i can set each splash screen and app image to where it is recognized as a phone app that would be really nice.

    Duely noted, the server will still not connect, so i have left an inquery in the suggested forum.
    Date: Mon, 15 Oct 2012 07:37:34 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
        Re: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
        created by David_Powers in Developing server-side applications in Dreamweaver - View the full discussion
    jmed0411 wrote: the phonegap program loads for quite some time and eventually reaches to the unfortunate conclusion that the server cannot be reached and to please try again. Any ideas on how that problem can be mended if the solution is in my hands?? I haven't used PhoneGap Build recently, but I have seen several reports about problems connecting to the server. One suggestion that I've heard is that there has been unexpectedly high demand on the server since the launch of Edge Tools and Services as part of the Creative Cloud last month. As far as I know, the only thing you can do is wait, and try again later. You could also try posting in the PhoneGap Build forum: http://community.phonegap.com/nitobi/products/nitobi_phonegap_build.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4774799#4774799
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4774799#4774799
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4774799#4774799. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Developing server-side applications in Dreamweaver by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • The folio for this application is missing resources

    Hi,
    In the Folio Builder I am able to build the application using the "Create App..." menu.
    When I'm trying to download the successfully built application from the DPS App Builder it says:
    "The folio for this application is missing resources. To resolve this issue, delete the folio and create a new one using Folio Builder Panel, then try building your application again."
    Thank you for your answer!
    vp

    Hello,
    I have the same problem and I have no idea how to solve it.
    When I'm trying to download the App for testing on ipad I get the message:
    Then I try to resolve this issue following instruction above and I still get the same message.
    vokopeti wrote:
    I've called Adobe Gold Support and the answer was it is not possible to create application with the folio builder throught the network anymore. We have to build the applications on the local mashine in the future.
    Following this tip I created my folio offline and then I uploaded to the folio producer and it worked.
    I was able to download both developper and distribution app.

  • I tried to open Photoshop Elements 11. I got a message that components of the application are missing and that I needed to reinstall Photoshop Elements. I purchased the software by downloading it from Adobe so how can I reinstall it?

    I tried to open Photoshop Elements 11. I got a message that components of the application are missing and that I needed to reinstall Photoshop Elements. I purchased the software by downloading it from Adobe so how can I reinstall it?

    Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

  • Assigning a BEx role to BSP - BSP application is missing in PFCG

    Hi everybody,
    at first I will describe our problem.
    We constructed a mixed environment web application, consisting out of a BSP application and WAD web templates. Unfortunately the url of web templates and the bsp-application differs - meaning the server is the same, but the port is different. That's why it is not easy to link the application each other, because for transportation reasons, we would like to have relative url paths.
    After searching the SDN and reading several help files I draw the conclusion, that I have to put my BSP application into a BEx role. Correct? If anybody has a better approach, please raise your hand now!
    So, I tried to create a role for my BSP application in the transaction PFCG. To specify the target I choosed entry type OTHER and BSP application. But in the appearing list of all BSP applications, my application was missing.
    I really wondered about it, because similar BSPs from other authors within the sap/bc/bsp - folder appeared in the list.
    Question: What are the prerequisites that a BSP application is available in the PFCG transaction?
    Thanks for any comments and helps
    Best regards,
    Sebastian

    Hi Raja,
    thank you for your quick reply.
    you are looking at constructing the BW WAD url and call it from BSP, however the host address (port) differs and coz of that you cannot use relative urls.
    Almost. I'm actually searching for the other way round. I want to call the BSP in an inlineframe of a WAD web template. But its exactly that port change issue, that causes the problem.
    My BSP application is located in a subfolder of default_host/sap/bc/bsp/ ?
    There are other BSPs in that folder which already appear in the PFCG transaction under OTHER.
    Best regards,
    Sebastian

  • Error opening files on a server "Application is missing" for every file type

    Hello,
    I have got quite a strange problem with Maverick and a server (Isilon NAS).
    When we connect to this server, with SMB or CIFS, it's impossible to open a file because "The application is missing". They are .PDF or .XLSX files mainly, so nothing exotic.
    If we copy those files locally we are able to open them. The problem is only happening on two new MacBook Pro, we have roughly 40 other various Macs without this bug.
    It's possible to "fix" the problem temporary by connecting to the same server, but on another share : smb://my_server/one_share -> "The application is missing", smb://my_server/another_share -> Working as expected. But next time "another_share" won't work, but "one_share" will...
    We tried to troubleshoot the problem but it looks like a really rare bug, we are going to install the Combo Updates to see if it helps.
    Any suggestion or idea is welcomed.
    Have a nice day

    Hi
    Did you try some steps given in the following article
    "Some files on the server may be missing or incorrect" Warning Message
    See if that helps. Do let me know if you have any question.

  • Air App for Android - error 301: application descriptor missing

    Greetings!
    I've been building in Flash for a while but am brand new to mobile development.  I'm currently trying to create my first Android app, a very basic game called "302 Saves The Galaxy". I don't intend to sell the game.  I'm really just trying to learn my way through the publication process for future projects.
    I've been able to get to the very last step in creating the apk file and I'm getting this error from the command-line process -
    "Error 301: Application descriptor missing/cannot be opened"
    Here's a screen shot of the command line window -
    Here are a few other details about my process -
    In Flash, I selected to publish to Air 2.0 because that's the only option I had (ie, no Air 2.5 option)
    I've triple-checked and all spellings seem to be correct in my command-line syntax
    I'm sure I'm missing something obvoius here.  Any suggestions?
    Thanks in advance!
    Joel

    Hi, Pahup!
    Thank you SO MUCH for that tip!  That solved the problem!  Like I said, I knew it must be something pitifully easy that I was overlooking. 
    Anyway, I really appreciate your taking the time to respond.
    Joel

  • Application images not displayed

    Hello,
    Apex 4.1, got a problem with app-images:
    <img src="#APP_IMAGES#tukan_large.jpg"> is not displayed, but the file is existing. None of my application images are displayed anymore.
    Any hints on what can be the reason for this are welcome!
    Thanks,
    Stephan

    Apex 4.1, got a problem with app-images:
    <img src="#APP_IMAGES#tukan_large.jpg"> is not displayed, but the file is existing. None of my application images are displayed anymore.
    Any hints on what can be the reason for this are welcome!Are the images stored in the database? I sometimes forget to re-load images when copying an application to a new instance.
    If the images have been loaded are they defined as application images or workspace images?
    Check the images as defined in your application under shared components.

  • Reinserting Preview/Images missing from  Library and Project

    After ingesting my images from CF reader into a project, I started working on them. For some reason after working on them for awhile, I started noticing that previews were missing from the project. I looked in the Library and they were not there either. However, when I looked in to the project folder (via the Aperture "folder" in Finder), the images and associated Aperture information files were all there in their respective folders.
    I'm not sure how I lost/deleted so many images from my folder and Library (I may have accidently deleted a stack, but when I searched the number of images missing I know I could not have accidently deleted that many that way if I did). But since the files are still on my hard drive in their respective folders, in the right location, is there a way to bring them back into Aperture?
    Thanks,
    Ed

    bump...if anyone can tell me that would be great. I know it sounds like a dumb question, but for the life of me I cannot do any command - import, etc. - that can get these files that reside in the actual folder to show up in Aperture's Library or its original project.
    Thx,
    Ed

  • VM template image missing from OVM Server 2.2.0

    Hi,
    We have configured couple of linux OVM images on OVM server 2.20. These images were running successfully from 1 month , suddenly we found 1 of the VM image missing from the /OVS/running_pool directory. Can you let me know if there is any bug in OVM 2.20 as we are running 100 of VM's and VM's image missing could be big issue in future.

    Welcome to the forums !
    The scripts should be available in the companion directory of the CD
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14198/installation.htm#I4367
    HTH
    Srini

  • "referenced images missing" when they weren't even referenced

    I am getting this "image missing icon" on images that are in the library. Rebuild database and everything and still no go.

    I have had a few of these "missing referenced" images also. The wife too has had some missing referenced photos that were never set as referenced. All were imported at the same time from a managed library from our MacBook. Hopefully someone can answer this question.
    Message was edited by: Dennis R

  • IPhoto images missing. All pictures were there, now they pop up momentarily then disappear. Any suggestions?

    iPhoto images missing. All pictures were there, now they pop up momentarily. Any Suggestions?

    This article recommends rebuilding the iPhoto Library but emphasizes having a backup first. Do you have one?
    http://support.apple.com/kb/ht2638
    Also, repair permissions.

Maybe you are looking for