Applications installed in my iTouch does not launch. the music and internet functions but the installed applications does not. tried switching it on and off, still problem persists

Applications installed in my iTouch does not launch. the music and internet functions but the installed applications does not. tried switching it on and off, still problem persists. help...

Your only chance besides getting it serviced would be setting it up as new device:
http://support.apple.com/kb/HT4137

Similar Messages

Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I have lost the audio for Youtube on all three browsers I have installed-Safari, Chrome, Firefox. I have Lion installed. I have tried restarting my MacBook several times, still no sound. What to do?

I have lost the audio for Youtube on all three browsers I have installed—Safari, Chrome, Firefox. I have Lion installed. I have tried restarting my MacBook several times, still no sound. What to do?
<Email Edited By Host>

I forgot to include in my post that I had downloaded the new flash after the "no audio" began and it did not help. The problerm began some time after I installed OS 10.7.4.

Tried syncing entire music library to ipod but some albums were skipped. tried click and drag album but device does not get highlighted when i drag album there. any suggestions?

I tried syncing entire music library to ipod. some albums were skipped. tried clicking and dragging but device does not get highlighted when i drag the album to the device. How can I sync album to ipod? the album is imported and not purchased thru itunes store.

Does it play in iTunes on the computer? What is the format of the album?
Right click and select Get Info. Look under File in iTunes 12

How do you delete songs from iphone5, that are not in your iTunes library on the computer?! I have the spot unchecked where it says show all music and I still have songs on my iPhone that I want gone, but they're not in my iTunes library...HELP

I have a iPhone 5 with the most up to date software and I have songs appearing on my phone that I've deleted prior too from iTunes on the computer. How do I remove them from my phone, I've tried the left to right swipe and that just plays the songs! :/ Can anyone help me, I'd be forever grateful if I didn't have to go back to the store! I went I today abc he unchecked the show all music and there's still songs I don't want on my iPhone! :(

The answer to the question in the title of the thread is yes, but it is not necessarily a good idea. At some point you are likely to find you need to restore your iPod for one reason or another, or it could be lost, stolen or damaged. If your songs aren't on your computer, and backed up too, then you will be less than happy.
tt2

ITouch software updates/manually manage music and videos

Since I don't conventionally sync itunes and itouch, but manually manage my playlists and media, I'm beginning to understand that updating the ipod software means having to manually create my playlists again once the software resets to factory settings. Did I miss something in the update process that would have bypassed the factory reset? or am I obligated to join the masses who sync.
Others who suffer this indignity?
Thanks.

The software updates don't always restore the iPod, and there does not seem to be any user-control over that.
If you manage things manually, you're living dangerously if you're putting all your work into building playlist just on the iPod. You really ought to build the playlists in iTunes, then drag and drop them to the iPod. That way, in case you have to restore your iPod for any reason, you can easily replicate what you previously had on there. Note that this is not the same as auto-sync; you're still managing things manually but doing all the creating within iTunes so that you have a backup.

Once I load my raw pic into photoshop CC from camera raw and I go to my edit function my perspective warp tool is not availible, I'm currently running my photoshop in 8 bits and tried all the others to no effect. tried switching off my graphics card and s

Please help

Nobody can tell you anything without proper system info or other technical details.
I cannot use Perspective Warp. | Mylenium's Error Code Database
Mylenium

Ipad Facebook issues, under "settings" Facebook will not accept my password, nor will it delete the account. Have tried deleting the FB app and installing it again, have tried restarting ipad, any thoughts?

Ipad Facebook issues, under "settings" Facebook will not accept my password, nor will it delete the account. Have tried deleting the FB app and installing it again, have tried restarting ipad, any thoughts?

same problem SO FRUSTRATING

Music and videos do not sync from iTunes to iPhone 4

Hi all, any help on this issue appreciated. I have recently purchased an iPhone 4 and wanted to sync music and some videos on to it. I have successfully done this on my iPod Nano. But when I attempt it with the iPhone 4, the iTunes program freezes or stalls, and in Windows task manager it shows the program as 'Not responding'. I've probably tried it about 10 times now with different songs or videos but the same thing happens.
Does anyone have any idea why this is happening. Could it be my PC just being a bit old? Seems strange though when it works fine for the iPod.
Thanks

I'm having that problem with a number of podcasts as well. I'm getting a error message that the files will not play on the iphone.
I've tried switching usb ports, restoring iphone, uninstalling and reinstalling itunes, fixing permissions, rebooting, etc.
I've been able to download a podcast onto the iphone through the itunes app, which then plays fine until I synch w/ itunes and then itunes removes the podcast.
help?

Codex functions, but procedure not

hallo all,
I am a beginner in PL&SQL, I have a strange problem to propose you. I wrote a routine that, after a control, makes an insert and an update.
Well, if I launch it as simple codex, insert and update function. If I launch it as procedure, insert functions, but update no.
Can you help me?
as PL/SQL:
declare
cursor SDOC_WORK_contr_cur is
select TIPO_CAMP,ESITO,IMPTOT_OR,NUM_IMPORTO_TOT,ID_SDOC,ROWID
from NOC_SDOC_WORK
where TIPO_CAMP = 'A' and ESITO = '1' or ESITO = '0';
SDOC_WORK_contr_rec SDOC_WORK_contr_cur%ROWTYPE;
begin
open SDOC_WORK_contr_cur;
loop
fetch SDOC_WORK_contr_cur into SDOC_WORK_contr_rec;
EXIT WHEN SDOC_WORK_contr_cur%NOTFOUND;
if SDOC_WORK_contr_rec.ESITO = 1 AND SDOC_WORK_contr_rec.IMPTOT_OR <> SDOC_WORK_contr_rec.NUM_IMPORTO_TOT then
update NOC_SDOC_WORK set STATO = 6
where rowid = SDOC_WORK_contr_rec.rowid;
insert into NOC_ERRORI_SDOC_WORK(CD_ERRORE,NOTE,ID_SDOC)
values('C1','controllare IMPTOT ed IMPTOT_OR',SDOC_WORK_contr_rec.ID_SDOC);
end if;
if SDOC_WORK_contr_rec.ESITO = 0 AND SDOC_WORK_contr_rec.NUM_IMPORTO_TOT <> 0 then
update NOC_SDOC_WORK set STATO = 6
where rowid = SDOC_WORK_contr_rec.rowid;
insert into NOC_ERRORI_SDOC_WORK(CD_ERRORE,NOTE,ID_SDOC)
values('C0','controllare IMPTOT',SDOC_WORK_contr_rec.ID_SDOC);
end if;
end loop;
close SDOC_WORK_contr_cur;
commit;
end;
as procedure:
PROCEDURE noc_pr_autocontrollo
IS
cursor SDOC_WORK_contr_cur is
select TIPO_CAMP,ESITO,IMPTOT_OR,NUM_IMPORTO_TOT,ID_SDOC,ROWID
from NOC_SDOC_WORK
where TIPO_CAMP = 'A' and ESITO = '1' or ESITO = '0';
SDOC_WORK_contr_rec SDOC_WORK_contr_cur%ROWTYPE;
begin
open SDOC_WORK_contr_cur;
loop
fetch SDOC_WORK_contr_cur into SDOC_WORK_contr_rec;
EXIT WHEN SDOC_WORK_contr_cur%NOTFOUND;
if SDOC_WORK_contr_rec.ESITO = 1 AND SDOC_WORK_contr_rec.IMPTOT_OR <> SDOC_WORK_contr_rec.NUM_IMPORTO_TOT then
update NOC_SDOC_WORK set STATO = 6
where rowid = SDOC_WORK_contr_rec.rowid;
insert into NOC_ERRORI_SDOC_WORK(CD_ERRORE,NOTE,ID_SDOC)
values('C1','controllare IMPTOT ed IMPTOT_OR',SDOC_WORK_contr_rec.ID_SDOC);
end if;
if SDOC_WORK_contr_rec.ESITO = 0 AND SDOC_WORK_contr_rec.NUM_IMPORTO_TOT <> 0 then
update NOC_SDOC_WORK set STATO = 6
where rowid = SDOC_WORK_contr_rec.rowid;
insert into NOC_ERRORI_SDOC_WORK(CD_ERRORE,NOTE,ID_SDOC)
values('C0','controllare IMPTOT',SDOC_WORK_contr_rec.ID_SDOC);
end if;
end loop;
close SDOC_WORK_contr_cur;
commit;
end noc_pr_autocontrollo;
tks
leo

ok, I write again my post:
I wrote a routine that, after a control, makes an insert and an update.
Well, if I launch it as simple code, insert and update function. If I launch it as procedure, insert functions, but update no.
Can you help me?
as PL/SQL:
declare
    cursor SDOC_WORK_contr_cur is
    select TIPO_CAMP,ESITO,IMPTOT_OR,NUM_IMPORTO_TOT,ID_SDOC,ROWID
    from NOC_SDOC_WORK
    where TIPO_CAMP = 'A' and ESITO = '1' or ESITO = '0';
    SDOC_WORK_contr_rec SDOC_WORK_contr_cur%ROWTYPE;
begin
    open SDOC_WORK_contr_cur;
    loop
    fetch SDOC_WORK_contr_cur into SDOC_WORK_contr_rec;
         EXIT WHEN SDOC_WORK_contr_cur%NOTFOUND;
            if SDOC_WORK_contr_rec.ESITO = 1 AND SDOC_WORK_contr_rec.IMPTOT_OR <> SDOC_WORK_contr_rec.NUM_IMPORTO_TOT then
                update NOC_SDOC_WORK set STATO = 6
                where rowid = SDOC_WORK_contr_rec.rowid;
                insert into NOC_ERRORI_SDOC_WORK(CD_ERRORE,NOTE,ID_SDOC)
                values('C1','controllare IMPTOT ed IMPTOT_OR',SDOC_WORK_contr_rec.ID_SDOC);
            end if;
            if SDOC_WORK_contr_rec.ESITO = 0 AND SDOC_WORK_contr_rec.NUM_IMPORTO_TOT <> 0 then
                update NOC_SDOC_WORK set STATO = 6
                where rowid = SDOC_WORK_contr_rec.rowid;
                insert into NOC_ERRORI_SDOC_WORK(CD_ERRORE,NOTE,ID_SDOC)
                values('C0','controllare IMPTOT',SDOC_WORK_contr_rec.ID_SDOC);
            end if;
    end loop;
    close SDOC_WORK_contr_cur;
    commit;
end;as procedure:
    PROCEDURE noc_pr_autocontrollo
    IS
    cursor SDOC_WORK_contr_cur is
    select TIPO_CAMP,ESITO,IMPTOT_OR,NUM_IMPORTO_TOT,ID_SDOC,ROWID
    from NOC_SDOC_WORK
    where TIPO_CAMP = 'A' and ESITO = '1' or ESITO = '0';
    SDOC_WORK_contr_rec SDOC_WORK_contr_cur%ROWTYPE;
begin
    open SDOC_WORK_contr_cur;
    loop
    fetch SDOC_WORK_contr_cur into SDOC_WORK_contr_rec;
         EXIT WHEN SDOC_WORK_contr_cur%NOTFOUND;
            if SDOC_WORK_contr_rec.ESITO = 1 AND SDOC_WORK_contr_rec.IMPTOT_OR <> SDOC_WORK_contr_rec.NUM_IMPORTO_TOT then
                update NOC_SDOC_WORK set STATO = 6
                where rowid = SDOC_WORK_contr_rec.rowid;
                insert into NOC_ERRORI_SDOC_WORK(CD_ERRORE,NOTE,ID_SDOC)
                values('C1','controllare IMPTOT ed IMPTOT_OR',SDOC_WORK_contr_rec.ID_SDOC);
            end if;
            if SDOC_WORK_contr_rec.ESITO = 0 AND SDOC_WORK_contr_rec.NUM_IMPORTO_TOT <> 0 then
                update NOC_SDOC_WORK set STATO = 6
                where rowid = SDOC_WORK_contr_rec.rowid;
                insert into NOC_ERRORI_SDOC_WORK(CD_ERRORE,NOTE,ID_SDOC)
                values('C0','controllare IMPTOT',SDOC_WORK_contr_rec.ID_SDOC);
            end if;
    end loop;
    close SDOC_WORK_contr_cur;
    commit;
end noc_pr_autocontrollo;

When i downloaded itunes and try to launch the program it says a installed component is not installed. What does that mean?

When i downloaded itunes and try to launch the program it says a installed component is not installed. What does that mean?

Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Lookout 6.1 build 27 OPCClient does not launch the Opto 22 OPC SEVER

In the same computer, with the same Lookout 6.1 a few weeks ago, I had communication between Opto 22 OPC Server and Lookout using the OPCClient in Lookout. Settings in OPCClient were for a really fast scanning rate (50 milliseconds) and de deadband was set to zero in order to see all the inputs changes with the best resolution. These I/O units are Opto PAC EB2 brains, and the OPC Server belongs to the suite of PAC 8.0 (I tried also 8.1) of Opto 22. The I/O Configuration and the OPC configuration was done with the same OPTO22 software version.This was a test done in order to see if I can get 20 samples per second from all the I/O's. It did go well, even a little faster than required. It was informed to my bosses, then I had the 'go' for the project I'm working on. That was the main concern of everyone here; the fast communication between Lookout an the Hardware.
The computer runs windows XP SP2, has two ethernet ports; one with dynamic IP address on motherboard (for the company network), and a PCI ethernet cad with a fixed IP address in the range of the IP addresses of the Opto 22 brains dedicated to talk to these I/O units.
I called first to the tech support of OPTO 22. They shown me how to double check and to launch manually the OPC Server, there is a tester software for it. The OPC Server was launched and I saw it in the task manager under processes tab.
When I create the object in Lookout, it does not see the server, neither launches the server. I can see the data members of the OPCClient, but I can not see the variables or tags from the server.
Again, it did work a few weeks before in the same PC, with the same Lookout and the same Opto 22 as a test. Now I need to add the OPCClient to my application and make the corresponding connections, but I can't.
This is becoming a kind of hurry, time is running and the application can not get to work.
Any suggestions?
Thanks in advance.

When the OPC Client object is created, I can select the OPTO22OPCSever.2 in the dropdown list of servers. It is there, and the object can be configured normally. I must see in the object explorer (expanding the OPCClient object) the tags configured in OPTO 22 Server,but they are not there. The Client object only shows its data members. Once Lookout is open with the OPCClient, the task manager/services does not show Opto22OPCSever.exe running, that tells me that Lookout's client does not launch the server and that's why it does not show the tags configured in the server.
I have uninstalled Opto 22 software and re-installed, I called Opto 22 tech support and they shown me a way to launch manually the server, even how to monitor some of the values of its tags. I saw the Opto22OPCServer.exe in the processes list of the task manager, I read values of some tags with the OPC tester, To me, the server side is working fine.
Then, I installed Lookout .During this process there was an error 1922 and a message saying that files mssgl.mdf, mssgl.mdl, and mssgl.ldl are not found, These files must be located in C:\ Program Files\ National Instruments\Lookout 6.1\ Database. During the first installation of Lookout 6.1, I followed the instructions in the README file, where some specific commands must be typed in the run windows and executed to create the database properly. It was done, no errors were displayed during the first installation.
The thing is that this OPCClient/OPCServer DID WORK before. For some reason it does not work NOW.
this computer didn't have any previous version of Lookout installed, there is no possible old database messing here.
Again; the computer runs windows XP SP2, it has a dual core processor.

I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. There are no page sizes, paper types, appearsto be locked on a 13x19 size but It.

Hi to the Mac Folks,
I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
I primarily print photos from Photoshop CS5. The term Page Set-up has gone missing in the file pull down menu. Can't make any choices There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
Preview has no "Page Setup" - or does it?
Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
Woody

Hey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders. You can then navigate all the contents as normal.
HTH,
S.

My CS6 program that has never had a problem before, is not telling me that there is an error and that it "unexpectedly quit" when I simply try to launch the program. I have restarted my computer several times. It does the same thing each time. So then

My CS6 program that has never had a problem before, is not telling me that there is an error and that it "unexpectedly quit" when I simply try to launch the program. I have restarted my computer several times. It does the same thing each time. So then I tried uninstalling the program and re-installing. It said that it could not install due to an error. So I STILL can't launch my program. I don't know what to do. Any help would be appreciated. I have to edit photos for a photoshoot and return them tomorrow. :/

Reset Photoshop's Preferences?
Your Photoehop preferences will survive un-installing and re-installing Photoshop......

Applications installed in my iTouch does not launch. the music and internet functions but the installed applications does not. tried switching it on and off, still problem persists

Similar Messages

Maybe you are looking for