Applications installs 'clashing' during OSD

I have discovered that my Office 2010 installation, via an 'Applications' package fails if I also deploy .Net Framework 4.5 via a 'Package' package during an OSD TS using MDT. 
What would be the best logs to look at, and in which order to discover what's causing the failure?

Hi,
I would start with the SMSTS.log, how do your TS look like? I would install .NET Framework 4.5 before office and then reboot the computer before the office installation as well. Or you have already tried that?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

  • ConfigMgr 2012 R2 CU1 Client Installation fails during OSD Patch error 1635

    Senario:
    Single Primary Site A00, offloaded MP. R2 CU1 patch installed on primary site. Seperate "client with hotfix" package and distributed to offloaded DP.
    OSD Task Sequence Installs the client fine as can be seen in the ccmsetup.log file ""<![LOG[CcmSetup is exiting with return code 0]LOG]!><time="15:18:34.414-120" date="05-27-2014"
    But then later in the same log the client iniated a repair, "<![LOG[Client (5.00.7958.1000) is installed and is the same or lower version. Initiating repair.]LOG]!><time="16:13:29.634-120" date="05-27-2014"
    but at this stage fails to find the patch.
    <![LOG[Repairing version 5.00.7958.1000 of the client with product code {8864FB91-94EE-4F16-A144-0D82A232049D}]LOG]!><time="16:13:29.666-120"
    <![LOG[MSI PROPERTIES are  REINSTALL=ALL REINSTALLMODE=vmous  INSTALL="ALL" SMSCACHESIZE="15360" DISABLECACHEOPT="TRUE" FSP="<FSPName>" PATCH="C:\_SMSTASKSEQUENCE\OSD\A0000101\X64\HOTFIX\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP"
    CCMDEBUGLOGGING="1" CCMLOGLEVEL="0" CCMLOGMAXSIZE="52488000" CCMLOGMAXHISTORY="5"  SMSSITECODE="A00" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"
    CCMCERTID="SMS;624660EDFE6E9C9EFD4653520218B5D17010D8B9" REMEDIATE="true" SMSPUBLICROOTKEY=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]LOG]!><time="16:13:29.681-120
    Error in the repair-msi log states, "Unable to create a temp copy of patch 'C:\_SMSTASKSEQUENCE\OSD\A0000101\X64\HOTFIX\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP'." " MainEngineThread is returning 1635"
    By creating a share on the primary site and referencing the share as the patch loacation solves the issue.
    PATCH=<a href="file://\\\<HOTFIXShare>\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP">\\<ServernName>\<HOTFIXShare>\KB2938441\CONFIGMGR2012AC-R2-KB2938441-X64.MSP.
    Obviously its not ideal for the CU1 client msp to be installed over the WAN. Can anyone explain why:
    1. The client seems to need a repair
    2. Cannot access the MSP file when available locally on the client in the "'C:\_SMSTASKSEQUENCE" folder.

    I always fall back to use this method, when dealing with hotfixes in a task sequence:
    http://www.scconfigmgr.com/2014/03/26/install-kb2910552-hotfix-for-configmgr-2012-r2-client-during-osd/
    It may be worth a shot to try it out, if you haven't already.
    Regards,
    Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja

  • Applications not installing during OSD Deployment

    I'm pushing out Windows 7 with applications installing at the end of the TS. I was getting the first error below. I fixed that by putting a line between the client install and the application install, rebooting the system and starting the system to the default
    operating system. The first time I did this the deployment worked, OS Deployed as well as applications. After that it's failed multiple times with the second error in the smsts.log file. I then looked at the datatransferservice.log (number 3) and it looks
    like it's failing to download the application. It's referring to DAV, I'm assuming this is not WebDAV because I know that's not needed in 2012. When I log into the system, join it to the domain, client communicates with the MP it installs the application fine.
    Help appreciated, thanks!
    1.
    !bInWinPE, HRESULT=80070032 (e:\nts_sccm_release\sms\client\tasksequence\executionengine\instruction.cxx,518)
    TSManager 8/6/2014 7:16:06 PM
    1812 (0x0714)
    The step (Install Applications) must be running in full OS
    TSManager 8/6/2014 7:16:06 PM
    1812 (0x0714)
    TSManager 8/6/2014 7:16:06 PM
    1812 (0x0714)
    Failed to run the action: Install Applications. 
    The request is not supported. (Error: 80070032; Source: Windows)
    TSManager 8/6/2014 7:16:06 PM
    1812 (0x0714)
    2. 
    Execution status received: 24 (Application download failed )
    InstallApplication 8/6/2014 5:54:49 PM
    2360 (0x0938)
    App install failed. InstallApplication
    8/6/2014 5:54:49 PM 2360 (0x0938)
    Setting TSEnv variable '_TSAppInstallStatus'='Error'
    InstallApplication 8/6/2014 5:54:49 PM
    2360 (0x0938)
    Setting TSEnv variable 'SMSTSInstallApplicationJobID__ScopeId_36B9AB1E-FE2C-43BB-9772-8CE858478A81/Application_869b44cd-6306-4618-bda7-0368c7fb40da'=''
    InstallApplication 8/6/2014 5:54:49 PM
    2360 (0x0938)
    Completed installation job. InstallApplication
    8/6/2014 5:54:49 PM 2360 (0x0938)
    Step 3 out of 3 complete InstallApplication
    8/6/2014 5:54:49 PM 2360 (0x0938)
    Install application action failed: 'Java 45'. Error Code 0x80004005
    InstallApplication 8/6/2014 5:54:49 PM
    2360 (0x0938)
    3.
    Successfully sent location services HTTP failure message.
    DataTransferService 8/6/2014 8:46:54 PM
    1944 (0x0798)
    Error sending DAV request. HTTP code 401, status 'Unauthorized'
    DataTransferService 8/6/2014 8:46:54 PM
    1944 (0x0798)
    GetDirectoryList_HTTP('http://1SCCM.domain1.org:80/SMS_DP_SMSPKG$/c1ec269a-4976-4b46-a04c-2d4a180e6175') failed with code 0x80070005.
    DataTransferService 8/6/2014 8:46:54 PM
    1944 (0x0798)
    DTSJob {CF7CC231-DCEB-43D6-8AF5-2C0E7E55D573} in state 'Cancelled'.
    DataTransferService 8/6/2014 8:46:54 PM
    2820 (0x0B04)
    DTSJob {CF7CC231-DCEB-43D6-8AF5-2C0E7E55D573} cancelled by client.
    DataTransferService 8/6/2014 8:46:54 PM
    2820 (0x0B04)
    [CCMHTTP] ERROR: URL=http://1SCCM.domain1.org:80/SMS_DP_SMSPKG$/f870f8b5-9764-48c6-a588-878ffc88c5b3, Port=80, Options=192, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE
    DataTransferService 8/6/2014 8:46:54 PM
    2984 (0x0BA8)
    Raising event:
    instance of CCM_CcmHttp_Status
    ClientID = "GUID:5EEDD317-44F5-4C4A-B142-99E1281B50CD";
    DateTime = "20140807004654.766000+000";
    HostName = "1SCCM.domain1.org";
    HRESULT = "0x87d0027e";
    ProcessID = 280;
    StatusCode = 401;
    ThreadID = 2984;
    DataTransferService
    8/6/2014 8:46:54 PM 2984 (0x0BA8)
    Successfully sent location services HTTP failure message.
    DataTransferService 8/6/2014 8:46:54 PM
    2984 (0x0BA8)
    Error sending DAV request. HTTP code 401, status 'Unauthorized'
    DataTransferService 8/6/2014 8:46:54 PM
    2984 (0x0BA8)
    GetDirectoryList_HTTP('http://1SCCM.domain1.org:80/SMS_DP_SMSPKG$/f870f8b5-9764-48c6-a588-878ffc88c5b3') failed with code 0x80070005.
    DataTransferService 8/6/2014 8:46:54 PM
    2984 (0x0BA8)
    DTSJob {A98670C8-4D5E-4C2E-8857-B0F669EF0343} in state 'Cancelled'.
    DataTransferService 8/6/2014 8:46:54 PM
    2984 (0x0BA8)
    DTSJob {A98670C8-4D5E-4C2E-8857-B0F669EF0343} cancelled by client.
    DataTransferService 8/6/2014 8:46:54 PM
    2984 (0x0BA8)

    First note that WebDAV is absolutely used in 2012, just not the Windows Server provided WebDAV component.
    I've had this happen before in my lab but don't think I ever fixed it explicitly. Have you tried following the guidance in this post:
    http://blogs.technet.com/b/configurationmgr/archive/2010/06/03/solution-you-may-experience-slow-performance-when-using-bits-and-kerberos-authentication-on-configmgr-2007-distribution-points.aspx ? I know it's not the symptoms you described, but the behavior
    is related.
    Jason | http://blog.configmgrftw.com

  • "Application failed to evaluate" during OSD after SP1 Upgrade

    Hi,
    Today i upgraded out configuration manager from 2012 rtm to 2012 sp1. The update process completet without any errors but now i'm unable to install application during osd. The first application crashed with the message:
    Installation job completed with exit code 0x00000000
    Execution status received: 16 (Application failed to evaluate )
    in smsts.log
    I know that there are some gotcha's regarding application installation during osd after sp1 upgrade. I already did the following steps:
    - Update the deployment type of the application in my osd task sequence
    - Re-Add the Network Access Account
    - Removed the first application in the task sequence to see if the problem is application related
    - Checked the option "Allow this application to be installed.." in the application properties
    - Reboot my site servers
    I can install application via Software Center without any problems, also the software updates are working normally.
    Thanks in advance

    Hi,
    How are things going? Please let us know if there is any progress.
    Regards.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Failed Application Installs During TS error 0x87d00269

    The task sequence execution engine failed executing the action (Install Applications) in the group (Build the Reference Machine) with the error code 2278556265
    Action output: ... tallapplication\installapplication.cpp,1065)
    Step 2 out of 2 complete
    Sending error status message
       Setting URL = http://xy.axy.com, Ports = 80,443, CRL = false
       Setting Server Certificates.
       Setting Authenticator.
    Set authenticator in transport
       Setting Media Certificate.
    Install application action failed: 'Mozilla Firefox (en-US)'. Error Code 0x87d00269
    Sending StatusMessage
    Setting message signatures.
    Setting the authenticator.
    CLibSMSMessageWinHttpTransport::Send: URL: xy.axy.com:80  CCM_POST /ccm_system/request
    Request was successful.
    hrInstallation, HRESULT=87d00269 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\installapplication.cpp,899)
    pInstall->InstallApplications(saAppNames, sContinueOnError), HRESULT=87d00269 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\main.cpp,277)
    Install application action cannot continue. ContinueOnErrorFlag is set to false.
    Install Static Applications failed, hr=0x87d00269.

    http://social.technet.microsoft.com/Forums/en-US/5577606c-109a-4c78-8339-89da4ae4789b/failed-application-installs-during-ts-error-0x87d00269?forum=configmanagerosd
    Check this forum please. Hope this will help!
    BTW, are you able to deploy the failed application out of OSD TS?
    Cheers | Navdeep Sidhu

  • Need for SYS passwords during application installs

    I have been seeing more of this lately.
    Developers running application installs, SIEBEL, Oracle clinical etc, need to have the install run as the user SYS.
    Apparently the new application user being created needs certain read privileges on SYS owned tables.
    What I have been doing is one of two things
    1) When the developers run the install, I walk over and enter the SYS password myself on the pertinent application install screen. This way I don't have to share the password with them.
    2) reset the SYS password and provide the temporary password to the developers during installation.
    I am curious how other DBA's are handling this?
    Thanks

    Hi,This application has to run only the user sys? Otherwise, you can created a user and to do grant of DBA for it, Now, your explanation is very well. I don't know others solutions.
    Kind regards, Bruno Reis.
    www.brunors.com

  • Workgroup client application issues during OSD/ No site assigned, unknown location

    Testing SCCM 2012 operating system deployment with MDT 2013 integration.
    I have a build and capture sequence setup and all is good apart from Application installs, they fail.
    I've read through the other similar threads but nothing applied works in my scenario.
    The same apps deploy to existing CM clients successfully.
    Packages can be deployed successfully during the task sequence.
    I've tried using the subnet the client uses as a boundary. I've tried an IP range, no luck.
    I've added DNSSUFFIX SMSMP FSP in the setup windows and configmgr step
    I've set the DP to allow anonymous access.
    The MP dns srv record is present in DNS.
    In the logs it always says the workgroup client is in an unknown location and therefore doesn't get a Site code.
    The logs say that the MP info is missing even though I've tried /mp and SMSMP.
    If I join the domain all is good. I don't want to join the domain during the build and capture sequence but if I have to then I will.
    Any ideas would be very welcome.
    Cheers

    These are extract from the logs:
    from clientlocation.log
    <![LOG[[CCMHTTP] ERROR: URL=http://HNL-SCCM02.HNL.LOCAL, Port=80, Options=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG
    <![LOG[Error sending HEAD request. HTTP code 401, status 'Unauthorized']LOG]
    <![LOG[Workgroup client is in Unknown location]LOG]
    from locationservices.log
    <![LOG[Error sending HEAD request. HTTP code 401, status 'Unauthorized']
    <![LOG[Workgroup client is in Unknown location]LOG]!><time="13:52:35.114+420" date="12-05-2014" component="LocationServices"
    <![LOG[[CCMHTTP] ERROR: URL=http://HNL-SCCM02.HNL.LOCAL, Port=80, Options=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!>
    From smsts:
    <![LOG[MP server http://SCCM02.domain.local. Ports 80,443. CRL=false.]LOG]!><time="13:24:20.520+420" date="12-05-2014" component="TSManager" context="" type="1"
    thread="2828" file="utils.cpp:5881">
    <![LOG[Successfully completed the action (Use Toolkit Package) with the exit win32 code 0]LOG]!><time="13:24:48.645+420" date="12-05-2014" component="TSManager" context="" type="1" thread="2828"
    file="instruction.cxx:830">
    <![LOG[MP server http://SCCM02.domain.local. Ports 80,443. CRL=false.]LOG]!><time="13:24:48.645+420" date="12-05-2014" component="TSManager" context="" type="1"
    thread="2828" file="utils.cpp:5881">
    <![LOG[Install application action failed: 'Java 7 x64'. Error Code 0x87d00269]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="3" thread="4088"
    file="installapplication.cpp:879">
    <![LOG[Sending error status message]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="installapplication.cpp:883">
    <![LOG[   Setting URL = http:/SCCM02.domain.local, Ports = 80,443, CRL = false]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context=""
    type="0" thread="4088" file="utils.cpp:6143">
    <![LOG[   Setting Server Certificates.]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="utils.cpp:6171">
    <![LOG[   Setting Authenticator.]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="utils.cpp:6178">
    <![LOG[Set authenticator in transport]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:7734">
    <![LOG[   Setting Media Certificate.]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="utils.cpp:6195">
    <![LOG[Sending StatusMessage]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="libsmsmessaging.cpp:4023">
    <![LOG[Setting message signatures.]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:1295">
    <![LOG[Setting the authenticator.]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:1325">
    <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: HNL-SCCM02.hnl.local:80  CCM_POST /ccm_system/request]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="1"
    thread="4088" file="libsmsmessaging.cpp:8604">
    <![LOG[Request was successful.]LOG]!><time="13:28:44.739+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:8939">
    <![LOG[Policy Evaluation failed, hr=0x87d00269]LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication" context="" type="3" thread="4088" file="installapplication.cpp:1259">
    <![LOG[Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_1BBC49FC-F46A-4773-8CEE-00AFF6383ECE/Application_a1a8c511-ded8-451c-b79d-b5ebb8d122eb'='']LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication"
    context="" type="1" thread="4088" file="installapplication.cpp:66">
    <![LOG[EvaluationJob complete]LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="installapplication.cpp:1278">
    <![LOG[MP list missing in WMI, sending message to location service to retrieve MP list and retrying.]LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication" context="" type="2"
    thread="4088" file="installapplication.cpp:1051">
    <![LOG[m_hResult, HRESULT=87d00269 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\installapplication.cpp,1065)]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context=""
    type="0" thread="4088" file="installapplication.cpp:1065">
    <![LOG[Step 2 out of 2 complete]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="daprogress.cpp:226">
    <![LOG[Install application action failed: 'Java 7 x64'. Error Code 0x87d00269]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="3" thread="4088"
    file="installapplication.cpp:879">
    <![LOG[Sending error status message]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="installapplication.cpp:883">
    <![LOG[   Setting URL = http://SCCM02.domain.local, Ports = 80,443, CRL = false]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context=""
    type="0" thread="4088" file="utils.cpp:6143">

  • Initiate Application Installation from App Catalog via Command Line / PowerShell

    Hey Guys - 
    We have a single, fairly extensive OSD task sequence which covers systems for all departments.  Due to it being a single TS for all, PC Lab techs must manually install some apps after it finishes via the Application Catalog.  In past environments,
    I've used MDT's UDI Wizard to create a frontend where techs could select additional software they wanted installed during the TS and it worked great!  I'm trying to get something like that approved now, but in the meantime told the techs I'd come up with
    a temporary solution to make their job easier.
    Enter WPI (Windows Post Installer.)  Back in the days before I used SCCM OSD and relied in Acronis images (yuck), I used a the WPI tool which only ran once - at the first login - even before the desktop
    loaded.  It's highly customizable and basically shows a single window which lists any applications or scripts (in groups) which you have configured.  You place a checkmark beside each one you want to install, click the "Install" button,
    then watch it's installer frontend install each of the selected apps.  Once done, it either restarts the PC or exists to the desktop.  For each application I can add, I'm provided with a few options to
    install it.  Obviously, an installation command line string field, but also a few more like installation order, requirements, and dependencies. 
    My Question
    Each of the applications I've listed are in our Application Catalog and are advertised to All Users.  Even though I could simply point the installer string to the app's source path and use the same string that the SCCM Application uses, I've been asked
    to do something different.  Instead, I'm trying to find a command line string which when run would perform the same action as if a user had selected to install an Application from the Application Catalog.
    My thoughts are that if this is possible, it would probably be in the form of a PowerShell string - not just a basic command line one.  Since WPI has a frontend which shows the progress of each app's installation progress as well as overall progress,
    it's designed for the installation strings to install the app silently.  Therefore, I would much prefer my solution run silently as well if possible.
    So... does anyone have any idea for how I can make this happen? Thanks!
    In case it makes a difference or answers any questions, below are two screenshots showing most of the fields and options which may be used to configure how an application installs in WPI.  I couldn't include the Dependencies one since I could only
    attach two images to my post.  Also, the manual for WPI is embedded in the application's
    download (ZIP) and not a page on their site.  For the examples below, I used Google Chrome, but didn't configure anything besides the application's name:
    Application Detail Options
    Application Command Options
    Ben K.

    From what I'm reading, you are working towards MDT but it's not approved yet, so the goal is to:
    Deploy a "bundle" of applications as painlessly as possible without using UDI to make customizations quick.
    Lets talk options then.
    Option 1:  If machines types are in a unique OU or security group, create a collection for that and set these applications to mandatory install.  After initial deployment, the provisioner can drop the computer in the proper OU or group and you're
    good to go.  Downside:  collections refresh plus client check-in makes this less than instant.
    Option 2:  Orchestrator.  You can write a runbook that will approve and push apps.  You can then use the Orch console front end or a more friendly sharepoint/SM portal to push things out like a Manager would approve apps.  Downside:  if
    not already deployed, there's no way they would approve that infrastructure if they are hesitant about MDT/UDI :)
    Option 3:  PowerShell and WMI.  This should be doable ... but I've never tried it.  It looks like you're headed down the right path ... but i guess my question is:  if you can't have UDI when do get to pick the app?  Are you planning
    to write a full multi-box for them to check their apps after the fact?  In that case ... just have the appcontroller URL pop up on first login ... might be easier than reinventing the wheel.

  • Client install fails during OSD

    Hi,
    OS Deployment usually works without any issues for us. Sometimes (like 1 out of 15 deployments) the SCCM client will not install correctly and the system will boot up without any applications. That's okay, we just restart it and it works on the second attempt.
    Lately however, I discovered an issue with a certain model (Lenovo R500): The SCCM client configuration now fails every time (tried four times in a row!). It wasn't that bad before...
    Here are some answers to questions some of you might probably consider asking. :)
    - We are using diskpart /clean at the start of every task sequence
    - The system is domain joined before the SCCM client install step
    - Jason Sandys ConfigMgrStartup Script (client health GPO) is active
    - Client push install is active
    - The BIOS is up to date
    - These are our setup parameters during OSD: SMSMP=*FQDN* CCMEVALHOUR=12 PATCH="\\*FQDN*\hotfixes\configmgr2012ac-r2-kb3026739-x64.msp"
    - I tried installing newer network card drivers during the OSD in case the old drivers suddenly can't handle it any more but that also didn't improve the situation
    I thought maybe the GPO or the client push are interfering with the setup while running the OSD, but that also happens if the GPO is disabled. Also, the client push install never interfered with the OSD before and I don't think that it suddenly would.
    I zipped and uploaded the ccmsetup.log and client.msi.log to OneDrive, I would really appreciate it if someone could take a look at the logfiles and identify any potential issue that I'm not seeing.
    Logfiles: http://1drv.ms/18FTcAH
    Thank you!

    I just found a solution thanks to another fellow forum member that suggested I make sure that "Client Push" was not enabled.  I too was experiencing intermittent failures in OSD at the "Setup Windows and ConfigMgr" step that did
    not make any sense.
    After a review of the ccmsetup logs on the OSD machine and ccm.log on the server I was able to see that "Client Push" was beating the TS to installing the client by 4 seconds causing the TS to fail.
    Torsten indicated that Client Push and OSD can be problematic.  
    OSD Client Patch fails intermittently 
    After reviewing your ccmsetup.log I see the same evidence at time stamp 11:40:50 that I saw in my logs indicating that ccmsetup was already running when the TS went to install the client.
    An instance of ccmsetup is running as a service. The current instance will be terminated. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
    Installation will be cancelled due to shutdown. Windows Installer will return error code 1602. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
    MSI: Aktion 11:40:50: Rollback. Aktion wird rückgängig gemacht: ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
    An instance of ccmsetup is running as a service. The current instance will be terminated. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
    Installation will be cancelled due to shutdown. Windows Installer will return error code 1602. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
    File C:\WINDOWS\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi installation was cancelled (1602) ccmsetup 2/26/2015 11:41:00 AM 1920 (0x0780)
    Hi pfitchie,
    I unmarked my reply as answer, it happened again and after reading your thread and this reply it all makes sense. I now disabled the Clientpush and will see what happens. Is there a possibility this is only happening if you apply CU4 during the OSD? It never
    happened before.

  • Microsoft Office Customiziatoin Installer : Error during installation, file:///c:/Program Files (x86)/Microsoft Visual Studio Excel 2013, Windows 7 64 bit

    How do I get ride of the Microsoft Office Customization Installer  Error during installation, Name:  file:///c:/Program Files (x86)/Microsoft Visual Studio     From:  10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
    Downloading file: :///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed
    Details: 
    Name: 
    From: file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto
    ************** Exception Text **************
    System.Deployment.Application.DeploymentDownloadException: Downloading file:///c:/Program Files (x86)/Microsoft Visual Studio 10.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto did not succeed. ---> System.Net.WebException:
    Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.Net.WebException: Could not find file 'c:\Program Files (x86)\Microsoft Visual
    Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'. ---> System.IO.FileNotFoundException: Could not find file 'c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies\Microsoft.VisualStudio.QualityTools.LoadTestExcelAddIn.vsto'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
    Boolean checkHost)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync)
       at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       --- End of inner exception stack trace ---
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       at System.Net.FileWebRequest.GetResponseCallback(Object state)
       --- End of inner exception stack trace ---
       at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.FileWebRequest.GetResponse()
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
       --- End of inner exception stack trace ---
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()

    I discovered the cause of this problem. I had pointed my "My Documents" folder to a NAS drive that I had rather than my C drive. Apparently Photoshop was dependant on it being on the C dirve. When I  repointed this back to my C drive CS5 installed properly.

  • Oracle Application installation 10.1.3.x

    I'm having issue during Oracle Application installation 10.1.3.x.
    installation in debug mode shows followings:
    unzip: cannot find ../stage/Components/oracle.swd.oui/10.1.0.4.0/1/DataFiles/*.jar, ../stage/Components/oracle.swd.oui/10.1.0.4.0/1/DataFiles/*.jar.zip or ../stage/Components/oracle.swd.oui/10.1.0.4.0/1/DataFiles/*.jar.ZIP.
    No zipfiles found.
    Error in writing to directory /tmp/OraInstall2010-08-25_12-44-56PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success
    unzip is in path.

    I checked the path ../stage/Components/oracle.swd.oui/ and found folder 10.1.0.5.0 instead of 10.1.0.4.0
    I renamed the folder from 10.1.0.5.0 to 10.1.0.4.0 and it worked.

  • Application Installer end with exit code 7

    Hi guys, Iam installer a application the third party designer Is EMC backup sizer, and when I proceded to install exit code error #0
    How I will can resolve this? thanks
    [2013-01-23:10:22:34] Application Installer begin with version 3.5.0.1060 on Windows 7 x86
    [2013-01-23:10:22:34] Commandline is: "C:\Users\Cesar\Desktop\Avamar 6.0\ebss_install_V5.6.0.air"
    [2013-01-23:10:22:34] Installed runtime (3.5.0.1060) located at c:\Program Files (x86)\Common Files\Adobe AIR
    [2013-01-23:10:22:34] Unpackaging file:///C:/Users/Cesar/Desktop/Avamar%206.0/ebss_install_V5.6.0.air to C:\Users\Cesar\AppData\Local\Temp\fla9E9F.tmp
    [2013-01-23:10:22:37] Application signature verified
    [2013-01-23:10:22:37] Unpackaging/validation complete
    [2013-01-23:10:22:37] No app located for appID 'com.emc.Sizer' and pubID ''
    [2013-01-23:10:23:20] Converting unpackaged application to a native installation package in C:\Users\Cesar\AppData\Local\Temp\fla5090.tmp
    [2013-01-23:10:23:22] Native installation package creation succeeded
    [2013-01-23:10:23:22] Starting app installation to D:\EMC. Installing app com.emc.Sizer version v5.6.0 using the source file at file:///C:/Users/Cesar/Desktop/Avamar%206.0/ebss_install_V5.6.0.air
    [2013-01-23:10:23:22] Installing msi at C:\Users\Cesar\AppData\Local\Temp\fla5090.tmp\setup.msi with guid {7DE25154-1962-05E6-0AAD-A408D8F62A84}
    [2013-01-23:10:23:25] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-01-23:10:23:25] Rolling back install of C:\Users\Cesar\AppData\Local\Temp\fla5090.tmp\setup.msi
    [2013-01-23:10:23:25] Rollback complete
    [2013-01-23:10:23:25] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-01-23:10:23:25] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location D:\EMC -desktopShortcut -programMenu file:///C:/Users/Cesar/Desktop/Avamar%206.0/ebss_install_V5.6.0.air
    [2013-01-23:10:23:25] Relaunching with elevation
    [2013-01-23:10:23:30] Application Installer begin with version 3.5.0.1060 on Windows 7 x86
    [2013-01-23:10:23:30] Commandline is: -stdio \\.\pipe\AIR_2688_0 -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location D:\EMC -desktopShortcut -programMenu file:///C:/Users/Cesar/Desktop/Avamar%206.0/ebss_install_V5.6.0.air
    [2013-01-23:10:23:30] Installed runtime (3.5.0.1060) located at c:\Program Files (x86)\Common Files\Adobe AIR
    [2013-01-23:10:23:31] Unpackaging file:///C:/Users/Cesar/Desktop/Avamar%206.0/ebss_install_V5.6.0.air to C:\Users\Cesar\AppData\Local\Temp\fla7A5D.tmp
    [2013-01-23:10:23:32] Application signature verified
    [2013-01-23:10:23:32] Unpackaging/validation complete
    [2013-01-23:10:23:32] No app located for appID 'com.emc.Sizer' and pubID ''
    [2013-01-23:10:23:32] Converting unpackaged application to a native installation package in C:\Users\Cesar\AppData\Local\Temp\fla8160.tmp
    [2013-01-23:10:23:34] Native installation package creation succeeded
    [2013-01-23:10:23:34] Starting silent app installation to D:\EMC. Installing app com.emc.Sizer version v5.6.0 using the source file at file:///C:/Users/Cesar/Desktop/Avamar%206.0/ebss_install_V5.6.0.air
    [2013-01-23:10:23:34] Installing msi at C:\Users\Cesar\AppData\Local\Temp\fla8160.tmp\setup.msi with guid {7DE25154-1962-05E6-0AAD-A408D8F62A84}
    [2013-01-23:10:23:34] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-01-23:10:23:34] Rolling back install of C:\Users\Cesar\AppData\Local\Temp\fla8160.tmp\setup.msi
    [2013-01-23:10:23:34] Rollback complete
    [2013-01-23:10:23:34] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-01-23:10:23:34] Elevated install failed: error 0 1603
    [2013-01-23:10:23:35] Application Installer end with exit code 7
    [2013-01-23:10:23:37] Application Installer end with exit code 7

    I'm not certain that Mageia 2 Linux is supported.  This Release Notes page and this Install Help page don't mention Mageia, just
    Fedora Core 12, Ubuntu 9.10, OpenSUSE 11.2.
    Roy

  • Client not installing during OSD - error code 80041002

    Hi All,
    I have an issue using SCCM 2012r2 with CU1 where the agent is not installing as part of the OSD step 'Setup Windows and ConfigMgr'. The error being returned is 1603 and with a bit more digging this appears to be this error
    Product: Configuration Manager Client -- Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint
    The error code is 80041002
    followed by
    Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint
    The error code is 80041002
    Having looked at some of the forums this appears to be a known issue which has a hotfix available if you are installing the client on a server hosting a ConfigMgr Management Point. However the issue I have is on a client PC during OSD.
    Originally I was installing the CU1 update using the PATCH= property in the installation properties and as part of my troubleshooting I have removed this leaving only the SMSCACHESIZE, SMSMP and FSP properties in the OSD step. This was working last week
    and I can see no reason why there would be any issues with this.
    Any help would be greatly appreciated as this is driving me crazy!

    @Nash The Setup Windows and ConfigMgr step contains the following:
    SMSCACHESIZE=20480 SMSMP=mpsiteserver.domain.local FSP=fspsiteserver.domain.local
    @Jason The errors are in clienmt.msi.log the end of the log looks like this:
    MSI (s) (F0:2C) [13:33:12:918]: Note: 1: 1729
    MSI (s) (F0:2C) [13:33:12:918]: Product: Configuration Manager Client -- Configuration failed.
    MSI (s) (F0:2C) [13:33:12:918]: Windows Installer reconfigured the product. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 1603.
    MSI (s) (F0:2C) [13:33:12:918]: Deferring clean up of packages/files, if any exist
    MSI (s) (F0:2C) [13:33:12:918]: MainEngineThread is returning 1603
    MSI (s) (F0:FC) [13:33:12:918]: RESTART MANAGER: Session closed.
    MSI (s) (F0:FC) [13:33:12:918]: No System Restore sequence number for this installation.
    === Logging stopped: 26/08/2014  13:33:12 ===
    While the section that contains the error 25150 looks like this:
    [13:33:12] Registering Hosting Configuration.
    MSI (s) (F0!A4) [13:33:12:638]: Closing MSIHANDLE (18847) of type 790531 for thread 2980
    [13:33:12] @@ERR:25150
    MSI (s) (F0!A4) [13:33:12:638]: Product: Configuration Manager Client -- Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint
    The error code is 80041002
    MSI (s) (F0!A4) [13:33:12:638]: Closing MSIHANDLE (18845) of type 790531 for thread 2980
    Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint
    The error code is 80041002
    MSI (s) (F0:C8) [13:33:12:638]: Closing MSIHANDLE (18843) of type 790536 for thread 1836
    CustomAction CcmRegisterHostingConfiguration returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (F0:2C) [13:33:12:638]: User policy value 'DisableRollback' is 0
    MSI (s) (F0:2C) [13:33:12:638]: Machine policy value 'DisableRollback' is 0
    Action ended 13:33:12: InstallFinalize. Return value 3.

  • Pre-provision bitlocker during OSD with a Windows 7 Enterprise image fails at Enable Bitlocker - SCCM 2012 SP1 beta

    I'm trying the SP1 feature to pre-provision bitlocker during OSD, using an MDT integrated task sequence.  It seems like the pre-provision part is working, but when the task sequence tries to enable bitlocker after installing the
    OS, it fails.  ZTIBDE.log contains the following:
    Property UDI is now = ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    Microsoft Deployment Toolkit version: 6.1.2373.0 ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    The task sequencer log is located at C:\WINDOWS\CCM\Logs\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    System drive is: C: ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    The deployment method is using ConfigMgr. ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    Property BdeInstallSuppress is now = NO ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    This script is not currently running in Windows PE ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    We are running a OS that supports BitLocker ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    OSDBitLockerTargetDrive= , OSDBdeTargetDriveLetter= , sOSDBitLockerTargetDrive= C: ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    This is a Refresh Build where BDE protectors were disabled. ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    OS Version is Windows 7 or higher. ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    Encryptable Volume Count:1 ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    Attempting to bind to: C: ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    Success setting oBdeVol ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    BDE Instance Bind Complete ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    Attempting to enable BDE Protectors ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    FAILURE ( 6767 ): -2144272377 0x80310007: Enable BDE Protectors ZTIBde 11/14/2012 5:04:42 PM 0 (0x0000)
    This laptop is in an OU with bitlocker related settings applied via GPO, including allowing enhanced PINs, requiring backup of the recovery passwords and key packages to AD, and to require TPM+PIN for the startup authentication.  
    Bitlocker provisioning is working on my production server using only MDT (No SCCM), with a task sequence deploying Windows 7.  I copied some of the variables from the customsettings.ini over to a collection variable in SCCM for
    the collection I'm testing deployment to. Putting those same variables in collection variables should work the same as if they were in the custom settings, but only for members of that collection, right?
    The variables set in the collection variables area are
    BDEInstall - TPMPIN
    BDEInstallSuppress - NO
    BDEPin - SET
    BDERecoveryKey - AD
    BDERecoveryPassword - TRUE
    TPMOwnerPassword - SET
    OSDBitlockerMode - TPMPin (This one wasn't copied from the other MDT share, but added just for sccm. 
    I didn't copy the BDEWaitforEncryption variable, it didn't seem like that one would be necessary with the pre-provisioning.   What am I doing wrong here?

    If not you could add a set variable action to your task sequence after the UDI wizard to set OSDBitLockerPIN to %BDEPin%. You could add a condition to the action to only run if BDEPin exists.
    I don´t quite fallow, how I can switch these variables between. I admit I some time have difficulties to understand the variables. Could you mark discribe me the settings of set variable step I have to enter. Thanks!
    With Confmgr step Enable Bitlocker I have another issue - it does not allow to to enter pin code with letters.
    No problem :-). There is a task sequence action called "set task sequence variable". Just add one of these actions to the task sequence after the UDI wizard. There are only two things you have to configure in the action, the variable you want to set
    and the value you want to set that variable to. The UDI wizard will create the variable BDEPin with a value equal to the PIN you enter in the UDI wizard page. So in your "set task sequence variable" action enter the variable name as OSDBitlockerPIN
    and the value as %BDEPin%. This action will then create the OSDBitlockerPIN variable with the value that was stored in BDEPin by the UDI wizard. The built in SCCM action will then use this as the PIN rather than whatever value is configured in the task sequence
    editor.
    However the best solution would probably be to get the UDI wizard to set OSDBitlockerPIN rather than BDEPin in the first place. I think you can do this in the UDI wizard editor or directly in the XML. I don't use the editor these days so can't recall offhand.
    I will take a look at this next week.
    Most of the task sequence actions support variables and it enables you to configure the action dynamically at runtime. For example the same sequence can be used to deploy systems into different domains, languages, applications etc. all by setting variables.
    It's the basis of how the UDI wizard works, it just sets variables which are then consumed by either MDT scripts or task sequence actions. The variables can be configured by UDI, collections, MDT customsettings.ini, MDT database or scripts. Dynamic deployment
    is definitely the way to go :-).
    I think you are correct about the built-in action not supporting enhanced PIN. I think it only supports standard numeric PIN. Whether setting the PIN via the variable works around a restriction in the task sequence editor I am not sure, I suspect not.
    Mark.

  • Troubleshoot PowerShell Script during OSD

    I am very new to SCCM OSD. I've been doing MDT OSD for some time, and I can generally figure MDT issues out.
    We're in the middle of setting up the SCCM 2012 SP1 environment. MDT has not been integrated. The contractors that are assisting have already built and tested several task sequences. I'm trying to troubleshoot a script but I'm having a hard time getting
    anywhere.
    I have 2 questions:
    Is there any way to show the Windows shell during OSD?
    Is the tsenv: already created, or do I need to use "New-Object -COMObject Microsoft.SMS.TSEnvironment"

    #1: which one? Programs/applications that are run during the TS are not allowed to interact with the desktop, but you can press F8 to bring up a cmd
    #2: This object has to be created.
    Torsten Meringer | http://www.mssccmfaq.de

Maybe you are looking for

  • Error occurred while accessing application id Excel services application unattended service account from secure store service

    Hi,   I follow up the book "Professional SharePoint 2013 Administration" to build the SharePoint 2013 BI include Excel Services. and created the Secure Store services to save the user SP_Install for member. For Now, I can upload the worksheet and ope

  • Load Balancing, Server and / or Client ?

    Hi I am experiencing a problem with the connection pooling in odp.net. I have a simple test app that creates a connection, executes a query, populates an object then closes the connection. I have found that when I have client side load balancing on v

  • How to overwrite a log and bad file in external table in oracle 10g

    Hi, I have used external table in oracle 10g.whenever use select query in external table orace internally create one log file in specified directory, but this log file is growing.How can i overwrite the log file(old to replace with new).I need overwr

  • SAP Certified Logo

    Does any one know if the SAP Certification team in Germany have released a "SAP Certified Professional" Logo yet?... I've been told that they are working on one to release as a result of requests coming through from certified consultants. The certifi

  • Installing and running mySQL on Mac OS 10.4

    I'm hoping someone here might be able to point me in the right direction. I've installed mySQL, and in Terminal got so far as getting the response "Starting MySQL database server", but then it just goes to a "/usr/local/mysql Bob$" prompt, and nothin