Applications keep losing their serial numbers

From time to time I get that applications at start-up ask for their serial numbers. These are being filled in again and after some time the message appears again.
I have encountered this with Adobe Suite apllications and SketchUp.
Have done the permissions correction.
This is on a MacPro with MacOs 10.6.8
Hope someone can have a suggestion.

You should contact Adobe Support and/or post in the Adobe Forums since it's their product and Sketch Up developer if its not part of Adobe.

Similar Messages

  • The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't work.  All software is updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

  • Keeps asking for serial numbers after I joined Creative Cloud for students

    I changed the language in creative cloud to English but nothing has changed.
    I'm still using trials and whenever I log in, it keeps asking me to type in serial numbers.
    What's the problem?

    Cloud forum http://forums.adobe.com/community/creative_cloud/?view=discussions
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    -has a link about why you are prompted to enter a serial number

  • Cisco Prime - extract list of hostnames and their serial numbers.

    Hi all,
    is there a way of extracting a list of hostnames ( for devices in EMEA ) and their associated serial numbers from Cisco Prime and into say a csv file?
    Many thanks,
    Paul

    Hi Paul,
    if you have Prime Infrastructure then  run the below report :
    Report > Report Launch Pad > Device > Detailed Hardware > Detailed Hardware Report Details
    If Prime LMS then :
    Reports > Inventory > Detailed Device
    Hope it will help
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ***

  • Newest MBPs and their serial numbers

    Hello,
    I was wondering what the serial numbers for the newest MBP are right now. I just got a MBP, and before I open the box, I'd like to know if it is one of the newer units.
    thanks much

    The serial number is printed on the outside of the Apple packaging. I recieved a W8617 (week 17) at the end of April.

  • Podcast application keeps "losing" my podcast's

    The only reason I didnt buy an Android phone was the seamless integration of my music and podcast's.  Now that the fabulous podcast app keeps "losing" all my podcasts I am really upset and do not plan to replace my iPhone 5 with another iPhone.  Anyone else having problems?

    It continues to happen.  The podcast app is randomly unsubscribing me from podcast's.  Wierd, Rogen hasn't put out a new podcast in like a week.  Must be the holidays.  Nope.  Apple Podcast just decided were not subscribed anymore.  And to six other podcasts.  And when I resubscribe, it downloads the last 5 podcasts from each provider. When I leave for a long commute today almost all newer podcasts give me the error "This podcast is currently unavailable from X podcasters website" even though it was downloaded earlier in the day and I listened to a portion of it.

  • How come my new group CC 2014 subscription opens up the old Application Manager and wants serial numbers?

    I'm signed up for a group CC account (just switched from a month-by-month) but when I try to launch a program it opens up the old Adobe Application Manager and asks for a serial number or start trial. Does anyone know what I need to do to get the access I'm supposed to be? Thanks

    The email ID here in forum has one CC registered to it which has expired, there is no other CC, of you trying to launch the CC with this Email ID then it will ask for serial number.
    Since you have CC for Team to this same Email ID, you need to log out & log back in of the Cc desktop app to activate the CC for Team though the activation server shows that the CC for Teams have been activated once on September 25th 2014.
    http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    Regards
    Rajshree

  • Image Capture application keeps "losing" my device

    Image Capture was telling me that there wasn't a scanner or camera connected. I use an HP Photosmart C4680. The printer aspect has been fine since upgrading to SL. I inserted my SL disk. Opened Optional Installs. Went through the prompts etc. and selected to install the Printer Support. Ejected the disk. Restarted computer. Opened Image Capture and device was listed on left side margin and test worked perfectly.
    The problem now is that every 12-24 hours the device disappears again from Image Capture.
    Anyone else have this problem or have any ideas how to permanently correct it?

    Similar problem with Lexmark X4550.
    Printing fine whether or not Image capture recognises the scanner.
    Open image capture no scanner listed (ipod and phone are listed).
    Unplug USB and pug in - scanner appears and works (there is a bug where the rotation correction is not supported and the scan fails)
    Quit image capture and re-launch image Image capture scanner is "lost" (ipod and phone appear as before). Unplug and plug in USB cable and scanner re-appears.
    Anyone have any suggestions as how I can make Image capture "remember" I have a scanner attached.
    I'm using the bundled Lexmark driver with SL.
    Cheers
    Ben

  • I keep losing my bank numbers as well my passwords they seem to be deleting when I close firefox?

    I dont what I am doing wrong perhaps by deleting the history . could this be causing it to hasppen

    Make sue that you do not use [[Clear Recent History]] to close passwords and cookies.

  • Check serial numbers of ohter applications

    Anybody know if I can use ARD to check the serial numbers of installed applications.
    For example, I'd like to get a list of installed FileMaker Pro serial numbers by machine.
    Thanks,
    b.

    Sorry, but probably not. Most applications deliberately do not write their serial numbers in an easily accessible or readable place (it would make it easier to pirate the software), and this includes FileMaker which, I believe, encrypts the SN so that it's not viewable outside of the application.

  • How to Query serial numbers on VXI smip modules.

    I'm trying to write a program in C# that will query the VXI SMIP Switch Modules for their serial numbers.  Right now I am able to view all the serial numbers through the soft front panel provided with the drivers but I need to automate this process and extract the serial numbers for further processing so I need to access the modules directly and read the data.
    My current  Setup:
    [Computer with PCI-MXI-2 Board] ------> [ Racal Chassis  with  "SM1000E double wide Carrier" that can hold 6 VXI SMIP switch module plugin cards]
    I'm able to see all resources in NI MAX.
    The VXI resource is shown in NI MAX as : VXI0::26::INSTR
    The VXI SM1000E Carrier that holds the 6 plugin module has logical address 26
    and there are 6 modules in there carrier that is 0 based, module 1 is 0, module 2, is 1, module 3, is 2 and so on...
    To my understanding, Visual Studio can automatically create wrapper code using the "Driver Wrapper Wizard" included with the T&M ToolKit.  And by doing this I was able to access some of the functions of the drivers associated with this module.
    I'm trying to use the vtvmSmip_QuerySmip function, which will return the NonVol data for up to six plug-in cards at once according to the documentation in the driver header file.  The definition of the SMiP NonVol structure can be found in the vtvmSmip.h file. But I'm still unsure how to use it.
    Using Visual Studio 2003, the function is available but it requires some arguments.
    Below is the wrapper code generated.
    [code]
    private void button1_Click(object sender, System.EventArgs e)
     // This code creates and initializes an instance of the VXIplug&play wrapper class
     // TODO:  Insert your appropriate values for address, idQuery etc.
     Agilent.TMFramework.InstrumentDriverInterop.Vxipn​pWrappers.VtvmSmip myVtvmSmip;
     myVtvmSmip = new Agilent.TMFramework.InstrumentDriverInterop.Vxipnp​Wrappers.VtvmSmip("GPIB0::7::INSTR", true, true);
     // TODO:  Add your code here.  For example:
     // myVtvmSmip.Reset();
    [code end]
    I was wondering if, I want to use myvtvmSmip.QuerySmip();  What should I pass in as the arguments?  This fuction suppose to return all 6 modules information. not sure how...
    Its definition is as follows:
    void VtvmSmip.QuerySmip(int smipStruct)
    "smipStruct points to the locaton where the data is to be sotred.  The Structure is of type vtvmSmip_SMIP_TYPE.  Look in vtSmipDefs.h for the definition of vtvmSmip_SMIP_TYPE.  Note:  The Plug&Play spec prohibits exporting data structures, so the structure is not exported."
    s
    I get and exception when I use this as:
    myVtvmSmip.QuerySmip(1);
    didnt work gave me exception..
    Another fuction I coulduse was this one.
    myVtvmSmip.ReadNonvol();
    I guess this returns 1 module at a time.
    Definition:
    voidVtvmSmip.ReadNonvol(short smodNmbr, System.Text.StringBuilder nvData)
    I suppose smodnmbr responds to each module, 0, 1, 2, 3, 4, and 5.
    I hope this isnt too much information.. I just want to be able to read the serial numbers of of these switch modules so I can process them.  If anyone can help, that would be great.  Thanks.
    Chan

    Hi Matt,
    Thanks for your replay. Right now im trying to query the VXI Tech SMP1200 double slot carrier that holds 6 SMP5004 modules.  But I have other SMP switches as well after I figure this one out, I belive if I can do this one, they should be the same for the other switches.
    SMP1200 Product Link:
    http://www.vxitech.com/ProductDescription.aspx?PID​=218
    SMP5004 Product Link:
    http://www.vxitech.com/ProductDescription.aspx?PID​=242
    I belive I have the drivers from the manufacturer.  When I try to implement the code below, I get an exception error.
    The logical address of the SMP1200 Carrier is 26. And it has a resource name of "VXI0::26::INSTR" as should in NIMAX.
    The SMP1200 holds 6 switch modules and I think its zero based ( Module 1 is 0, Module 2 is 1, Module 3 is 2 etc..up to 5)
    reading through the vtSmipDefs.h file included with the drivers, It says QuerySmip() returns information about 6 modules at once.
    ReadNonvol() reads one module at a time I belive.  Not sure how this works because using these functions, they dont return a value.  I don't know If I have to somehow read it back.
    [CODE]
    private void button1_Click(object sender, System.EventArgs e)
     // This code creates and initializes an instance of the VXIplug&play wrapper class
     // TODO:  Insert your appropriate values for address, idQuery etc.
     Agilent.TMFramework.InstrumentDriverInterop.Vxipn​pWrappers.VtvmSmip myVtvmSmip;
     myVtvmSmip = new Agilent.TMFramework.InstrumentDriverInterop.Vxipnp​Wrappers.VtvmSmip("VXI0::26::INSTR", true, true);
     // TODO:  Add your code here.  For example:
     // myVtvmSmip.Reset();
    myVtvmSmip.QuerySmip(1);
    [CODE}
    The code above is automatically generated using the built in Agilent T&M Toolkit driver wrapper wizard in the menu in Visual Studio 2003.  using this code, the intellisense menu does appear to show all the class members functions from the driver.
    When I run the program, I get an exception error.
    Ill post the exact data as soon as im back at work.
    I can also send you a link to the drivers and the help files that have some information about it. 
    Im kinda a newbie here with programming in C# and also VXI/MXI.  This is just part of my whole application im writing.  So far I've been able to query all the instruments(meters, scopes, etc) through the GPIB using IDN query so far.  Just the VXI left and its killing me.  Appreciate you help.  Look forward to your reply.
    Thanks Chan

  • CS3 Serial Numbers no longer in splashcreen... where have they gone?

    Once upon a time adobe products displayed their serial numbers in the "About" splashscreen... but it seems no longer!
    I need to reinstall my InDesign (since I installed an update. Arghhh) and want to make sure I'm entering the correct serial number for this copy, as we have 2 in the office, one of which has not had it's "spare" or "laptop" serial used yet. So I don't want to use that one on the reinstall, incase we get another laptop.
    My receipts from purchase don't have the serial listed on them.
    Should I assume the lower serial number is the older?
    Or is there some new secret place within the applications that show the serial?
    Jane

    You can't find the serial number in the application or on the computer. If you've lost the original box with the numbers, you have two options:
    - If you've registered the products you can log on to adobe.com and retrieve the s/n. Or, you can call Adobe and ask them to give them to you (you will need to prove that you are the one who registered them).
    - If you still have the original receipt, you can contact Adobe Customer Service and ask them to provide you with the s/n for the product.

  • Goods movement with serial numbers

    Hi,
    1. Is there any report or table where I can see goods movement of material with their serial numbers?
    2. Also in MMBE i can see 'On order stock'. I know this is PO open PO quantity.
    Now this open PO qty will not be there against any storage location. I got some stock on this status in some storage location.
    How I can move to 'unrestricted stock' status?
    Please advice.

    Hi
    Check these tables,
    SER00 General Header Table for Serial Number Management
    SER01 Document Header for Serial Numbers for Delivery
    SER02 Document Header for Serial Nos for Maint.Contract (SD Order)
    SER03 Document Header for Serial Numbers for Goods Movements
    SER04 Document Header for Serial Numbers for Inspection Lot
    SER05 Document Header for Serial Numbers for PP Order
    SER06 Document Header for Serial Numbers for Handling Unit-Content
    SER07 Document Header for Serial Numbers in Physical Inventory
    And in order to move On Order stock to Unrestricted you need to close those POs by doing GR.
    Hope it helps
    Rgds
    ramesh

  • Goods movements of material with serial numbers

    Hi,
    1. Is there any report or table where I can see goods movement of material with their serial numbers?
    2. Also in MMBE i can see 'On order stock'. I know this is PO open PO quantity.
    Now this open PO qty will not be there against any storage location. I got some stock on this status in some storage location.
    How I can move to 'unrestricted stock' status?
    Please advice.

    Hi,
    Is Serial number is the one obtained thro stadard batch management or is it a Zfield.
    On Order stock cannot be converted to unrestircted stock unless a GR is made.
    With regards,
    Jeeva

  • "My Adobe" site is permanently redirected to "Adobe ID" site. There is no way to retrieve serial numbers for CS 5.5 products and below.

    How can I get my serial number for CS 5.5 Master Collection and CS 5.5 Captivate? This was retrievable only a few days ago using the "My Adobe" site at (adobe.com/account.html)
    The My Adobe URL (adobe.com/account.html) has a permanent redirect to the new Adobe ID URL (accounts.adobe.com/) Just a few days ago, Adobe "My Products and Services" contained my collection of serials.Users now cannot access this URL at adobe.com/account/my-products-services.html with the redirect in place.
    The new Adobe ID site "My Products" at (accounts.adobe.com/products) reports "You have no registered products." We need the "My Adobe" classic site back to access our registered serials.
    Adobe should update their help documentation that references the old link (adobe.com/account.html) as well. Here are a couple of examples:
    Where is My Adobe account info | How to sign in/out « Caveat Lector
    Serial number, Redemption, and Product codes | Student & Teacher Editions

    https://accounts.adobe.com/products shows all my products with their serial numbers back to 2005 when I first registered PSE2.0 that came bundled with my camera, and the two example pages with old links properly redirect to the Plans page and all I have to do is click View all products and again I will see my list back to 2005.
    So things are working just fine for me.  If it says you have no products, maybe there are changes still percolating through the server network that aren’t in place from where you’re surfing from, or maybe you have multiple AdobeIDs and are signed into the one that doesn’t have products registered to it.
    In other words, things appear to be working just fine with my AdobeID using either the old links or the new links and so I’d reword the request to be that you want the new site to work properly.   The old site did have another layout that required clicking into each product to see the serial number whereas the new site list everything on one page without clicking into anything.  I prefer the new way.

Maybe you are looking for