Applications Moving Midi Settings

Why do certian Application change the default midi settings creating no sound output until you change it back. Is there anyway I or the developer can insure the output goes back to it's default. And which is the best setting to choose when I return it-It keeps changing and I forget which setting to place it on. I usually go with the highest which bring back the sound. It is usually thrown off by VLC player.
ImacG5 Mac OS X (10.4.8)

The normal setting is 44,100Hz, 16-bit. Any application that uses a different setting should change back when finished, but some don't.

Similar Messages

Keep getting "Application Moved" message when opening some programs

When I right click on a file type and chose the app to open it with, I will often get an "Application Moved" pop up box. I enter in my password to update the location but the next time I go and open that same app via a document, I get the same error message.

Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Change default MIDI settings in Logic.

Hi there,
Just bought Yamaha DTXplorer digitals drums. When I record the MIDI part in Logic Pro 8, it doesn’t play the right notes concerning BD, SN and so on. Is it possible to change the default MIDI settings in Logic so it fit to the Yamaha DTX – or other applications?
Thanks for your help – KGL.

There is not really any such thing as "default MIDI settings". Logic just gets the notes you play from your controller, and sends them to whatever other instruments you are using.
Does the DTX not use GM mapping? If not, I'd suggest you alter the notes it sends to be more suitable for your needs.
You can use Logic to remap notes in realtime (in a variety of ways, using environment transformers or mapped instruments) and this is the more flexible way of doing it, if you are comfortable with environment routing and so on.

AIR Application and Installer Settings

Hello,
I have installed the Adobe AIR extension for Dreamweeaver
CS3. However, whenever I click Save on the "AIR Application and
Installer Settings" screen I get the following error and the air
app is not built.
quote:
While executing onClick in AIRSettings.htm, a JavaScript
error occurred.
Any help would be greatly appreciated! I'd really like to get
started building AIR apps!

Having exactly the same problem on Dreamweaver CS4.
Can anyone help?

Application Moved - and it hasn't

when I export from LR5 to edit an image in Photoshop CC, I get a box announcing:
Application Moved
The application has been moved, and its path has
changed. To update the product configuration, click
update.
Do Not Update Update
I get this message EVERY TIME (although only once per session) I invoke Photoshop from Lightroom.
Of interest is this: when I launched Photoshop before launching Lightroom in the hope it would pass the image to the open program, Lightroom gave the error message anyway and opened another Photoshop session. I didn't think you could have two sessions running parallel and independantly.
I had CS6 installed when I installed LR5. Then I installed CC. Some time later, I used Adobe's uninstaller to remove CS6.
There's only a single version of Photoshop on my Mac - in Applications.
Somewhere in the system, Lightroom is reading a parameter set that's confusing it. That's the most likely cause to one who doesn't know the internals even though I looked through all of the user and system files that I could find that appeared to be related.
Is there a file I can tweak or is there another way of resolving this annoyance?

It went away in 5.5.
I never found out the original cause (and, since it now worked, hadn’t pursued it further).
Mark
Mark R Friedman
2 Decker Rd, Ossining, NY 10562
http://mark-friedman.com
[email protected]
(914) 762-7689

Resetting midi settings upon restart?

When I come back to the system the next day and re-open a project, I notice I have to reset all my volume fader and reverb settings in the Logic mixer ... relating to my outboard multi timbral synth keyboard.
I seem to remember there was a way I could resend\reset all data with a single click...
I just can't what exactly that click was.
Ben

Ben,
Unfortunately what Juhani suggested doesn't seem to work as it's supposed to. There is an option under "Logic / Preferences / MIDI / Reset Message - Send Used Instrument Settings on Reset" that doesn't seem to reset anything but the currently selected track. There's another setting in "Project Settings / MIDI / Chase - Send full MIDI reset before chasing" which is also not a complete solution.
I'm assuming you want to set them to the Fader Values and what not that you have modified within your sequence.
Here's what you do... there are 2 necessary steps:
1) In "Project Settings / MIDI / General - Miscellaneous" If you want Logic to be sure it recalls MIDI Track Volume, Pan and/or Program Change settings, check the "Used Instrument MIDI settings". You can also check the "All fader values" check box, but this setting as detailed in the Manual is specifically for Environment Fader values... and typically most people don't have MIDI Environment Faders.
2) Click on one of your MIDI tracks in the Arrange... under the Track Parameters sections on the left Channel Strip view (inspector needs to be on) you should see a Program, Volume and Pan parameter with a check box next to each. Check the boxes of the settings you want recalled on each session open. You'll have to check these for each individual MIDI track. This is a pain for any older sequences, but do this is any of your Templates so the session will be ready to go up front.
Keep in mind checking these boxes does NOT "lock" these parameters down, like Automation. If you check the Volume box and move the MIDI volume fader you'll see that the Volume parameter changes in response to the Fader movement. Also, MIDI automation will take precedence as well. Overall this is a good thing, and checking these boxes only tells Logic to send the current Volume, Pan and Program Change, but does not say add a Volume entry in the MIDI info of the track.
It's probably only necessary to send these when the Project opens, which is why it's set up that way. But I've noticed that if you want to send a single set of Track Parameters after the session has loaded, for whatever reason, up & down arrow over the track in question and it should send out the parameters. As does the "Options / Send to MIDI / Used instrument MIDI Settings".
Hope this helps...

No Sound, Tried the Midi Settings, checking volume, nothing works

Hi,
I have checked the forums, and have tried all of the fixes that work for everyone else. My computer was put out pre-garage band, so it is not on this machine. I am using a Digidesign 002 for my sound, and it works with pro-tools, and I-Tunes, but not with internet. I make sure everything is set right, and that the digidesign sound manager is connected, but still nothing. I made sure 44.1 was set in my midi settings. Oddly, it only gives me "built in audio" as the option for system output. I have the 002 set for the default output.
Thanks!

Check the DigiDesign Site for updates that match your OS and installed version of QuickTime.

When moving my settings icon I somehow lost it. How do I get it back?

IPhone 5 -
When moving my "settings" icon I somehow moved it to where I cannot see it. Can anyone tell meet how to get it back?

Swipe from the top of the home screen down so you get the Search field at the top...type Settings and the icon should appear.
Tap the Settings icon, General, Reset, Reset Home Screen Layout.

Audio Midi settings

I want to play hi Res (24 bit/192 Khz) music files from Linn on my iMac but the midi settings are restricted to 24/96 - how do I change these or upgrade these? Not sure what the maximum midi setting is but seems to change with each OSX release.
Regards,
Chris.

denon released a firmware upgrade to fix the midi issue on 10.5.7, and they say it "should work fine" with snow leopard... and this http://www.denondj.com/assets/misc/HC4500Audio_Midisetup.pdf is their setup instructions for setting up the controller on mac.
in the traktor pro audio setup i only see 'front left, front right, front center, low frequency effects' i can't send the audio to separate decks on my mixer, which i should be able to do easily, as that's what the whole purpose of the controller is.
i had read somewhere to try and set up the denon as an aggregate device in the midi utility in order to be able to send audio to my 2 decks and that worked perfectly on 10.5.8, once i made the upgrade the aggregate settings were all messed up. i think i'm going to try and downgrade to leopard, i need it to work.
oh and traktor's forums are equally useless.

Application moved error and question marks for dock app icons - related?

i am reposting this in the Mac Pro forum in addition to the Mountain Lion forum as i have been posting various issues on the mac pro here and i have gotten great help in solving them. also i am hoping to put a finishing touch on my computer setup after having done a FRESH INSTALL of the OS on both my computers with a manual migration of data (no Library items) so as to try and resolve old issues. i hope the experts on the list do not mind this posting and/or can offer advice on this specific issue.
i am getting the attached error this morning on my MacBookPro (Mountain Lion) and have gotten it before on my Mac Pro (Lion). i have had to do a fresh install of the OS and a manual migration of my data (no Library settings etc) due to slightly similar issues.
does anyone know what this errror is saying has happened?
i /did/ have an additional internal hard drive on the MAC PRO that Spotlight was indexing and which i had to take off of the Spotlight indexing functionality but this does not explain in any way (since there are no additional HD's on my macbookpro) why it just happened this morning on the macbookpro.
is this related to an issue where there may be QUESTION MARKS (instead of an app icon) in the dock in some of my other software?? i have one of these on my MBP and one on my MacPro even after the fresh install.
TIA

The Dock stores Aliases to the actual Applications. When you get a question Mark, it is caused by a Bad Link. The Application may have changed versions, moved, or been deleted. There is nothing especially magical about this. You can remove a Bad Link by dragging the link off the Dock, or add a proper link by dragging the Application Icon onto the correct area of the Dock.
OS X Mountain Lion: Customize the Dock
Apple-installed Applications need to remain in the Applications folder so that they remain protected and can be updated properly. The Installer will attempt to add links that point to the current Applications in the Applications folder, but if you have a pre-existing Bad Alias your bad Alias will not be Trashed. This may give you either the "moved..." message, or the Question Mark Icon in the Dock, or a grayed-out Icon with a "prohibited sign" if you have added things not appropriate for this version of Mac OS X.

Application Moved Error (ML and Lion)

i am getting the attached error on this morning on my MacBookPro (Mountain Lion) and have gotten it before on my Mac Pro (Lion). i have had to do a fresh install of the OS and a manual migration of my data (no Library settings etc) due to slightly similar issues.
does anyone know what this errror is saying has happened?
i /did/ have an additional internal hard drive on the MAC PRO that Spotlight was indexing and which i had to take off of the Spotlight indexing functionality but this does not explain in any way (since there are no additional HD's on my macbookpro) why it just happened this morning on the macbookpro.
is this related to an issue where there may be QUESTION MARKS (instead of an app icon) in the dock in some of my other software?? i have one of these on my MBP and one on my MacPro even after the fresh install.
TIA

The Dock stores Aliases to the actual Applications. When you get a question Mark, it is caused by a Bad Link. The Application may have changed versions, moved, or been deleted. There is nothing especially magical about this. You can remove a Bad Link by dragging the link off the Dock, or add a proper link by dragging the Application Icon onto the correct area of the Dock.
OS X Mountain Lion: Customize the Dock
Apple-installed Applications need to remain in the Applications folder so that they remain protected and can be updated properly. The Installer will attempt to add links that point to the current Applications in the Applications folder, but if you have a pre-existing Bad Alias your bad Alias will not be Trashed. This may give you either the "moved..." message, or the Question Mark Icon in the Dock, or a grayed-out Icon with a "prohibited sign" if you have added things not appropriate for this version of Mac OS X.

Issue w/ Spaces - Applications moving from screen to screen

Have been using that laptop for 2 months now - love it. Spaces is a very nifty feature (have it set it up on 4 screens). While I know how to navigate between spaces (using control+arrow for example), very often, my apps are moving from one space to the other.
While I went into System Preferences to assign specific apps to a specific space, I often have to drag back apps into their original space. That tends to happen quite often when I have several apps from Office open (I usually have entourage, excel and powerpoint open at the same time, each in its own space).
Am I doing something wrong. i really love Spaces but that issue is really counter-productive and right down annoying.
Thanks for your help!
Message was edited by: New Apple Lover!!

There is a known issue with MS Office 2008 not respecting Spaces.
It happens with some Adobe applications to.

InDesign CS4 application moving to front

Is it possible to stop InDesign CS4 application from moving to the front after saving or opening finishes. After I close a file while saving changes, I move to another application to begin work, such as typing, then InDesign snaps forward interupting my work. Not sure if there is a preference that eludes me or if there needs to be a script added/changed.
Any thoughts?
Thanks in advance for any help.
J

Thanks Stix! I guess I never noticed that it happens with other programs as well. I'm running on Max OS 10.5 and i'm now in search of a utility that would give me the ability to turn that feature off, or at least ignore requests from running programs.
Thanks again!

Correct Audio Midi Settings?

I am using an external microphone (an ATR USB mic) to broadcast over Internet radio. I am not sure all my settings are correct. Here is the Audio Device window within Audio Midi:
What is M under channel? Should the Thru box be checked on that line, and unchecked on the others? What does Thru mean?
Thanks.

klk145 wrote:
It does state in step 2:
"Connect your receiver
The audio connection must be a digital connection. In all cases that I know of, this means an optical cable from your mac to the receiver."
That is what led me to believe HDMI-only might not have been adequate.
He was basically trying to make it clear that a digital audio connection is necessary. He wrote the blog entry at a time when the only digital bitstream output from a mac was the optical connection.
Also, is all of this setup/installing Perian/messing with Terminal really necessary if I am NOT using Quicktime to play anything on the Mini? Or simply playing a real DVD?
I believe the DVD Player app uses the same parts of the operating system as quicktime. So, yes, it's still necessary.
Also make sure you go into the prefs for the DVD Player app and set the audio output to the digital output. Optionally, you can also disable the dynamic range compression in here (it's better to use the dynamic range controls in your receiver, if you do want DRC enabled).
Right now I am using Plex or VLC to play media files.
I don't know about Plex, but VLC does not rely on the quicktime infrastructure. However, you do have to go into the audio prefs of VLC and enable the SPDIF function.
What if I want to revert to default Terminal settings? How would I accomplish that?
The commands to disable are listed in the blog entry, immediately after the commands for enabling it.
Don't be afraid. There are no downsides that I'm aware of to doing the steps outlined on that page.

Home Library folder was moved, all settings are now gone

Hello all-
I'm having a serious dilemma, and could really use some help. My MacBook Pro has been having some issues lately: running slowly, constantly kicking me out of Safari for no reason & all together just acting "wrong". About a month ago after reading several posts on this and other forums I decided to download OnyX to keep my system in good order. Upon first running OnyX it told me that my start-up volume needed to be repaired before it would proceed. Scared to do this for fear of screwing something up worse, I stupidly ignored it and went about my life. Then last week my favourite freeware app, xPad, all of a sudden stopped working. This reminded me about the volume issue and I checked the volume with Disk Utility and yes, there were problems. I was told to fix it by using the install discs. I had planned on doing it later that night (though I wasn't sure how) but I thought it would be beneficial to have a copy of my "Home (Shortname) folder" before doing so, in case I screwed something else up. This is where my real problems began.
I made a burn folder of my "Home folder" but realized that the "Library" folder was somehow not in the burn folder. I can't be certain what happened from here. I know I freaked out. I put the burn folder in the trash and restarted my computer. Probably a stupid thing to do, but I admittedly have never known what to do with a burn folder if you don't want it any longer. Well, upon restart it was obvious that I had mucked something up because I was shown the blue apple screen instead of my regular desktop picture, my Dock had several question marks and everything was back to the original settings instead of my brushed metal settings. Though most of my icons were still there and the applications and documents folders seemed unharmed. I began Safari and it too was all amuck. I then took the burn folder out of the trash along with anything I found in "Recovered Files" folders, of which there where several and put them on my desktop. It seems that my Home Library Folder was indeed in the trash along with my Documents, Macintosh HD, Public and several others, plus the Burn Folder with all of the aliases to those folders minus the Library folder (if that makes any sense) & they are now all on my desktop. So now after that long rambling preface, for which I apologize, my questions are as follows:
1) If I move the Library Folder on my Desktop back to the Home(Shortname) folder will everything be all right again? i.e., applications will run correctly and find their data and life will go on as planned? Or is there something else I need to do instead?
2) After fixing this dilemma what do I do with all of the folders that are now on my desktop? Particularly my Macintosh HD, Documents, Public and Burn Folder? It seems that trashing them was where the real problems began.
3) Is it then safe to automatically try to do the reinstall via Disk Utility?
I suppose we should just start with getting this Library matter settled first. Any suggestions are welcomed and greatly appreciated. It seems I know just enough about my Mac to mess it up. So I will gladly take all the advice anyone can give. I thank you all in advance for your help.
-Angela

Thanks for the quick responses you guys, sorry it took me a while to get back. I did as you suggested bdkjones and all seems to be well. Unfortunately, xPad is still not working and I had hoped that the Startup Disk Repair would solve whatever issue that was, but alas it did not. I'll write the creator of that specific program to see if he has any suggestions, unless anyone else does in the meantime. But as for my prior predicament, though I haven't checked everything folder by folder yet, things seems fine so far. I truly appreciate the help. I pretty much knew what to do but just needed the encouragement of someone saying "Do this. You're on the right path. You won't ruin everything." And don't worry I'll be taking care of any future repairs as soon as I know about them from now on. It was really quite a scare for a while there.
Once again thanks and if you or anyone have any other morsels of info you feel like throwing my way about system maintenance or anything in the Mac realm you feel I should know please feel free. The last few days have made me realize I'm at that dangerous level in computer knowledge where I seem to know just enough to muck something up but not quite how to fix it.
-Angela

Applications Moving Midi Settings

Similar Messages

Maybe you are looking for