Applications Never Start and Screen Refreshes

My iPhone is not working consistently - once you start the application, the welcome screen starts for a second but then the screen flashes and you wind back on the main iPhone screen (with all the applications).
This only happens with DOWNLOADED APPS Only - the original applications that come with the iPhone (stocks, weather, etc) still work.
I have restored my iPhone 3 Times (). After each successful restore, the iPhone will work for about 1 day, then this will happen again - i.e. the downloaded applications will never run, not any of them (I've downloaded ~24 or so applications - none run after this starts).
I have already restored 3 times and this hasn't fixed it.
Please help - this in incredibly frustrating!!

It's not the individual apps my friend...it's either in the firmware or the most recent release of iTunes...or some combination of the two.
This is Apple's problem alone, not the developers trying to make this platform better.
Only Apple can fix this problem and they have yet to acknowledge it even exists (at least publicly). I've emailed Steve himself on two occasions about this problem over the last week or so and the response is simply that they are aware and should have a fix out in September to resolve these issues.
I for one am hopeful that tomorrow we see these updates!
Extremely frustrating for all and I really feel for the developers getting raked over the coals for Apple's problem. Apple owes us all a detailed explanation and apology.
I'm sure though we'll just see a firmware update with a simple explanation of "bug fixes".
Nathan

Similar Messages

I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

I try to make update for my iphone and start showing itunes need to be connected and never start and i connect my phone on itunes but it say need to be format for phone .please help me .

Hello Huss87bash,
This screen indicates that the device is in recovery mode, and must be restored in iTunes before it can be used again.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Once the device has been restored, you should be able to restore your device from a backup to replace all of your content and settings.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Cheers,
Allen

Application Server Starting and then Stopping

For some reason my NSP server is starting with MMC, but then after about a minute it stops again. Please see the log files below. It seems to be a database problem but I don't know how to fix it...
dev_w0
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
B
B Fri Jun 20 23:50:24 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.19)
B New connection 0 created
M sysno      00
M sid        NSP
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    23
M intno      20050900
M make:      multithreaded, ASCII
M pid        4928
M
M kernel runs with dp version 202(ext=109) (@(#) DPLIB-INT-VERSION-202)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4928) [dpxxdisp.c   1288]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          5280     (880)
M DpShMCreate: sizeof(tm_adm)          3351072     (16672)
M DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
M DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm)          528048     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1076)
M DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 04C80040, size: 3950264)
M DpShMCreate: allocated sys_adm at 04C80040
M DpShMCreate: allocated wp_adm at 04C81978
M DpShMCreate: allocated tm_adm_list at 04C82E18
M DpShMCreate: allocated tm_adm at 04C82E48
M DpShMCreate: allocated wp_ca_adm at 04FB5068
M DpShMCreate: allocated appc_ca_adm at 04FB5518
M DpShMCreate: allocated comm_adm at 04FB59C8
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05036878
M DpShMCreate: allocated gw_adm at 050368B8
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 050368E8
M DpShMCreate: allocated wall_adm at 050368F0
Y *** ERROR => ztta/diag_area is 64000. [sapinit.c    325]
Y *** ERROR => ztta/diag_area adjusted to 128000 (minimum value). [sapinit.c    327]
Y *** ERROR => ztta/cua_area is 90000. [sapinit.c    963]
Y *** ERROR => ztta/cua_area adjusted to 250000. [sapinit.c    967]
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Jun 20 23:50:25 2008
M ThInit: running on host PackardBell
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.019 (Make PL 0.23)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.019) UPDSTAT optimized (note 870327)
C    (0.010) MaxDB DBSL patch collection 1 2005 (note 850830)
C    (0.009) New stream compression available with LVC 7.6.0 b12 (note 835809)
C    (0.008) Support of SDBUPDEXCL (note 847616)
C    (0.005) Switch stream compression on/off (note 835809)
C    (0.005) ITAB stream handling optimized (note 835809)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.0    BUILD 018-123-113-357
C SQLDBC client runtime is MaxDB 7.6.0.018 CL 113357
C INFO : SQLOPT= -I 0 -t 0
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
[dbsdbsql.cpp 98]
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 118]
B ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#1 @ 1195] [dbsh    1195 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1391]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9995]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server PackardBell_NSP_00 on host PackardBell (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Fri Jun 20 23:50:25 2008
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10180
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4928) [dpnttool.c   327]

Ok I eventually figured it out... The SAP Application Server starts the database using the XUSER authentication - For some reason my system lost all settings for this.
In order to recreate, I had to use the command prompt and use the XUSER command.
Firstly "XUSER LIST" lists all user keys - I had none.
I then needed to set the default XUSER:
XUSER -d NSP -u SAPNSP,<password>
<password> is the password for the user specified
Then I created the "c" key:
XUSER -d NSP -U c -u SAPNSP,<password>
The reason I set up the "c" XUSER is because I noticed that in "\usr\sap\NSP\DVEBMGS00\exe\" there is a batch file used to start the DB - "strdbs.cmd". Inside this file it uses "c" as the user key in order to set the state of the DB.
After all of that it worked again...

MacBook Pro, randomly Windows 7 doesn't start and screen goes blank

Hi, I installed Windows 7 (Ultimate 64-bit) using the BootCamp on my MacBook Pro (MBP) i7, mid 2010. Installation was successful without any issues. This is my first Mac and, for now, I primarily use Windows on my MBP. The problem: After selecting Windows OS, randomly, Windows doesn't start and the screen goes blank. When this happens, most of the time I have to press the power button twice and press the Option key again to restart in Windows. Sometimes I have to hold down power button for several seconds to turn off MBP, then power it back on to start over. Windows 7 seems to restart on second try every time.
I can tell when the screen will go blank and Windows will not start, when the blinking cursor does not appear on upper left corner of the screen. Also, I enabled Windows OS Boot Log and nothing displays when this happens.
I took in my MBP, twice, to local Apple store Genius Bar and I was told that it was a Windows problem and I must purchase AppleCare Protection Plan to get help resolving the blank screen. It was explained to me that AppleCare had Windows experts who can help with resolving the issue. Therefore I purchased the AppleCare Protection Plan and spoke to AppleCare directly and still no resolution.
Any help you can provide would be greatly appreciated. Thanks in advance.

There is a forum specifically for Boot Camp, this is a general MBP forum and most of us don't use Boot Camp or Windows. The link to that forum is:
http://discussions.apple.com/category.jspa?categoryID=237
Apple does support Boot Camp however if your problem is with Windows Apple does not support a Microsoft product. You would need to contact Microsoft for help.
Roger

Can't stop applications automatically starting in user account

I created accounts for each kid.
Parental control is active, but no restrictions on which applications they can use; just website restrictions and time limits.
Allowed them to modify the dock.
Each time they log in various applications automatically start and removing them from the startup list does not seem to solve the problem, and one is not even on the list.
The "re-open windows" check box is NOT selected when they log out and I watched them quit the applications before logging out.
Example: for one account iTunes Helper always shows up on the startup list... I try to remove it in their account and it just pops back up... this appears to cause iTunes to autostart each time the log in... annoying.
Example: same account, the System Preferences always start up... fortunately it is locked so the kid can modify anything. But again, annoying.
I propagated read/write permissions through their account folders (thinking maybe some settings are not being recorded)... but no luck...
I may just try to re-create their accounts but was hoping to find the answer to this most perplexing issue.
Thanks,
mk

Aha! Even though they had permission to read/write their files, apparently the ownership was not theirs on all of the files, this must have restricted the mods to their account.
Thanks for the "jog".
Background:
This permission state stemmed from a full re-build/re-store I did about a year ago when the hard drive crashed (with encrypted files in the my account, no less)... The backups were out of date (long story) and it took about a week to recover and re-assemble the sparsebundle bands from the broken drive (I only lost 12 pictures!... Disk Warrior really helped with that one!)... anyway I managed to install a new drive and re-stored all of the accounts, but apparently some of the library states had me as the owner... If I think long enough I probably remember how that happened.
Again, thanks for "remembering" for me ;-)
mk

Measurement mark for start and stop interval

I have added measurement mark as Start interval and Stop Interval and saving that in the Time interval measure as indicator for BAM in my BPM Process.
This is to calculate the time it takes to finish some task. e.g.
A. process is started
B. Start Interval measurement mark is added and saved in measure BAM indicator
C. some task takes places.
D. Stop Interval measurement mark is added and saved in measure BAM indicator
But, when I create the report, the measure indicator doesn't have any value.
I think I am doing something wrong, but don't know what.
Has any one done this or come across this situation.
Thanks

Dear sir,
My application development steps are as follows:
1. My application consists of three control buttons are Start, Stop & Exit
2. Initially input parameters validation (Limits are assigned)
3. If any value entered out of limit, it will show the error message and the start button will gray and disabled. The user should not start the application until entered values are valied.
4. Internally some conversions and logics are implimented.
5. Coming to Front panel (GUI) start button is green color and stop button is red color.
6. The user entered the correct parameters and he started the appilication. After sometime he should know already application was started and he should not start again until he stops the appilcation.
For this i need logic for start and stop buttons to implement in my application. Thats why i choosen the traffic light concept changing the colors vice versa (which button shows green he should press that perticular button).
Please suggest me or provide any better option for start and stop buttons.
Regards,
S Nagaraju

NavTrack Applications never work

Anyone thinks to buy any application from NavTrack, please think again, all the applications never work and they have very bad support, so it is usually useless to talk to them.

hi, thanks for the warning.
but I did not find any of their app in the AppWorld, can you give us a link to one of their app please?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Safari slow or never starts forcing a hard shut down

Safari is slow to start initially and sometimes (quite often) never starts and the rainbow spinning cursor just keeps on spinning until I am forced to hold the off button down and force a shutdown. Safari usually starts (though slowly) thereafter.
I am running OS X Yosemite on a Macbook Mid 15" 2010.
I have looked at my DNS servers which are the same as for my Firefox browser and in the same order. Firefox has no problem.
Thanks

I have no extensions - The extensions are all set to 'off' in the preferences tab. I've turned off my iCloud links and tried several fixes including Java and Flash cleanouts and updates (wasted time) however Safari is really really very slow and often becomes unresponsive.
Several posts suggest the simple fix is to dump Safari and use Chrome or Firefox. I've found Chrome really quick. I'd like Safari to work
Any suggestions advice on reinstalling Safari welcomed
Thanks
Wysoc1

When downloading application updates, which are over a GB, my MacBook Air keeps logging me out and I have to start the download over. I have the power settings set to never turn off, and the display set to never go to screen saver.

When downloading application updates, which are over a GB, my MacBook Air keeps logging me out and I have to start the download over. I have the power settings set to never turn off, and the display set to never go to screen saver. Any suggestions?

I have the exact same problem/situation since a few days
I have not intalled a program lately.
Any progress Voratima??
Software Mac OS X Lion 10.7.5 (11G63)

Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another

Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another cannot operate the ipad at all, tried switching off and back on again, also restored the ipad but of no use

try restart
http://support.apple.com/kb/HT1430

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

I can't open personal accounts on the internet. After entering ID and Password then the enter key, it's as if the screen refreshes itself and wants me to start over. Help Please.

I can't open personal accounts on the internet. After entering ID and Password then the enter key, it's as if the screen refreshes itself and wants me to start over. Help Please.

Click here and follow the instructions.
(72059)

Why, after installing application and tapping on it, it never start ?

why, after installing application and tapping on it, it never start ?
it quit to the main screen

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy... See Here...
Troubleshooting applications purchased from the App Store

Windows seven stuck at starting windows screen and never works

hi, so my pc was running just fine until one day when i tried to turn my pc on it was just stuck on the starting windows screen, i even left it on overnight and all day to see if it would work and it didnt. so i have no idea how to fix it. its windows
7 home premium, and is hp pavilion g laptop with intel i3 processer. i have searched through forums and nothing has helped to make it work it just never runs its stuck there forever and i cant access anything on that pc

Hi,
First, you can try to repair your Windows 7 systems to login:
Restart Computer and continue to click F8, you would enter into WIN RE, choose the
repair computer option--->System Recovery Optionsà Select the
Startup Repair option. Then Startup Repair will now scan your computer to attempt to find and fix any startup problems.
After repair computer, I would suggest you to put the computer in Clean Boot and check which non Microsoft program is causing the issue. To help troubleshoot error messages and other issues,
you can start Windows 7 by using a minimal set of drivers and startup programs. This kind of startup is known as a "clean boot." A clean boot helps eliminate software conflicts.
Finally, after you fix it up, you can make
Steps for Normal startup:
1. Click
Start, and then click Run.
2. Type
msconfig, and then click OK. The System Configuration Utility dialog box is displayed.
3. Click the
General tab, click Normal Startup - load all device drivers and services, and then click
OK.
4. When you are prompted, click
Restart to restart the computer.
You may also install the latest display drivers and device drivers compatible for Windows 7.
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Applications Never Start and Screen Refreshes

Similar Messages

Maybe you are looking for