Applications not available

I am searching for several apps via my phone app world but the search result does not display them.Yet when i search via a PC on App world (not via the phone) the apps are there?
I then send the link to my phone to try and install the apps but get the message "application not available on your device or for your carrier". The phone is less than 1week old. surely the app search should bring up all apps on App world and where the app states available for for all devices and all carriers it should work?
my carrier says it's not the phone and it's because its new - can someone clarify this as correct or should i just request a new phone?
early replies appreciated
Thanks
Steve.

Well here are a few options.
Torch has 360 x 480, 9700 has 480 x 360 pixels, 8900 has 480 x 360 pixels, 9000 has 480 x 320 pixels.
I wouldnt recommend an iPhone (I deal with them all day) unless you jailbreak it.
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

Similar Messages

"Application not available" page

We have a need to display an "application not available" page when a person navigates to the site outside the normal hours of operations.
One way to do this is to have the index.html route to a JSF page which checks the time, then either redirects to the application, or if outside of operating hours displays the "not available" message.
Is there a way that this can be solved with the faces-config.xml file? I would like to move this logic out of the page.
thanks
d1

Two options came up:
- servlet filter
- a rule in the apache web server

User defined Applications not available

Dear gurus,
I'm new to BPC for MS, and my problem is that I have created new applications (copy of existing ones and some modifications) within a new set of applications.
When I try to select one of this new applications on BPC for Excel, they are not available for me, after I select my set of applications.
Do I need to do something after create this applications? I just followed SAP configuration guide "Business Planning and Consolidation - Administration", and the result was applications not available.
Could you help me?
Best regards,
Vitor Ramalho

Hi,
Go to Member access profile under security.Here you will see your newly created Application.Selection this application and assign
it to users and groups.Now go to connection wizard.In drop down box for Application you will be able to see your application.Login using this application.
Hope it will work.
Regards,
Prakash

"Application not available" for every application ...

I'm hoping this is an easy one...
I have a Lumia 710 with the latest software. I reinstalled the OS on my laptop, and reinstalled Zune. I connected my Lumia and change the sync partnership type from Guest and everything looked OK.
Since then, when I connect to the App Marketplace and irrespective of what application I select, I get the message "Application not available. This might be because your phone software needs to be updated..." message.
Any ideas on how to fix this?
Thanks a lot for your help,
Iain

If you go to Microsoft store on your PC and you sign in with your Microsoft account you should be able to select apps and install them to the phone without the need of Zune. If this works and you can also install apps directly on your phone I'd contact Microsoft Store Support for further assistance.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Error importing new version of our app "Application not available for edit"

Hi,
We are trying to import an app and get the error: Application not available for edit
thats it on a clean white background - Application not available for edit shows up at the top left corner of the screen.
Any clues?
We tried a new id, tried a custom id.
Then we tried deleting the existing app so we could insert the new app.
We can't delete either.
Help!

I'm going to hijack this thread and ask a follow up question to Scott (or whoever reads this).
When we export our application out of DEV it gets exported as Run + Build. When I have the DBA import into test or production on the Import screen I have them set it to Run Only and Reuse the Application ID. After installing it just forwards you to the same white screen with the "Application not available for edit" message on it. Now I understand the actual message since its Run Only, but its not clear that the import actually worked correctly or not.
So although it does seem to import correctly, they always get nervous when they see this that it didnt import correctly. So is it better to have them import as Run + Build and then go change the build status through the admin front end rather than the way I'm doing it now?

Why are certains applications not available in South African App Store?

Why are certain applications such as Google Earth, Google Mobile App, and most games not available in the South African App Store.
We speak English so localisation should not be a problem.
I'm sure there are no legal reasons why these applications are not available here, as we have desktop equivalents for most of them.
Why does South Africa have to have a diminished iPhone experience?

No idea.
You would have to ask Apple and/or the company that makes the app and/or - most likely - the Government of your country.
I'm sure Apple and the app developer would love to sell more apps.
Since this is a user forum, made up of iphone users, like you - there is nothing we can do about it.
Sorry.
You may leave feedback for Apple at:
http://www.apple.com/feedback/iphone.html

I'm an iPad user from South Africa why are 99 present of applications not available here if u want to download something it's not available why do apple sell their product in SA if we can't use anything there is no game on FB I can play I'm very upset

Please if u have any answer let me know I'm very disappointed in apple they sell their product world wide but applications are not available
thank u
<Email Edited By Host>

This is a user-to-user technical support forum. You're not addressing Apple here. Nor is anyone but spammers likely to respond to you by email.
Yes, you can use your iPad in South Africa. All of the built in apps should work just fine.
If you want to submit feedback directly to Apple, used the Feedback page:
http://www.apple.com/feedback
Best of luck.

Applications not available to sync

Hello Everyone !!
I have about 50 applications which I bought in the AppStore - some using iTunes and some using the iPhone's AppStore. I see all of them in my Library under the applications link. But when I connect my iphone, it shows up in iTunes but in the applications TAB only 15 or so are available to sync up. Why are all the applications not showing up in the application tab of the iphone ?
Any ideas ??
Thanks.

Hello Everyone !!
I have about 50 applications which I bought in the AppStore - some using iTunes and some using the iPhone's AppStore. I see all of them in my Library under the applications link. But when I connect my iphone, it shows up in iTunes but in the applications TAB only 15 or so are available to sync up. Why are all the applications not showing up in the application tab of the iphone ?
Any ideas ??
Thanks.

Source application not available - Acrobat 7.0 Pro after reader 9 update

I updated reader to 9.0 and now my Pro 7.0 is showing "installaion source for this product is not available" . It shows this when I try to open the program, uninstall, reinstall with cd. Help.

With Acrobat 7.x you ought to be able to have Adobe Reader 7.x.
I have been able to have the same version Adobe Reader/Acrobat Pro on local machines.
Each occurance has been/ is faithfully maintained updated.
Acrobat 4.x & Acrobat Reader 4.x
Acrobat 5.x "Full" & Acrobat Reader 5.x
Acrobat 6.x Pro & Adobe Reader 6.x
Acrobat 7.x Pro & Adobe Reader 7.x
Acrobat 8.x Pro & Adobe Reader 8.x
Acrobat 8 3D & Adobe Reader 8.x
Acrobat 9 Pro Extended & Adobe Reader 9.x
There is likely something in the inner swirl of dancing "1's" & "0's" that will cause a stumble.
Either it's happened and I've not noticed or I've not yet encountered it. A and a knock on the wood between my ears .
At one time, for a specific task, I had Acrobat 5.x "Full" and Acrobat 7.x Pro on a laptop.
While I was able to accomplish the specific tasks needed, I noted that integration with the installed Office suite took a hit.
You may want to obtain the Windows cleanup uninstaller.
It has been referenced here in other posts.
You may need to use it.
Be well...

Created application not available...

Hi to all,
I've installed SAP BPC,..I've followed to the post installation steps, and the only things weird is that I don't see the newly application that I've created in the list of the available applications when accessing through Microsoft Office (I see Finance, Legal, ecc...but not mine).
Any idea why?
Thanks
Daniele

Hi,
This happens when the member access profile is not maintained for an application. You can go to Admin and open your member access profile. You will find tabs for each of the application. You can refer to the existing applications and do the same for the newly created application. Then go to excel, click on connection wizard and login.
Hope this helps.

New application not available to other users

My iMac is set up with a separate user account for each family member. My wife has admin priveleges, my daughter's is a general account and my son's is restricted (i.e. kid friendly).
I just installed Rosetta Stone v3 from within my account. I confirmed that it runs properly; the installation was successful. My next step was to check that my family could use the program. Within my wife's account I got the following message: Fatal Application Error 5118. Naturally, my first thought was Permissions. I went back to my account and set the group Everyone to have read/write permissions and set the third menu (Others? Guests? I forget what it's called...) to read/write too. Back to my wife's account; Error 5118. I looked in the Get Info window to confirm the changes took place and they had. I restarted the machine, checked Get Info again (still read/write for everyone) and once again got Error 5118.
I've called Rosetta Stone. Of course they're not Mac-saavy, but they indicate Error 5118 is a permissions conflict.
My question(s): is there any way to ensure that applications I install are available to all users? Do I have to log in as Root (something I HATE doing) to install new applications?
Thanks in advance...
Dave

Problem Solved! Although I had set the privileges for the application, the problem was in HD>Library>Application Support>Rosetta Stone. By setting that folder and its enclosed folders to read/write for everyone, the fix was in.
It's too bad that I had to do any of this. The installer should have adopted the permissions from the folders it installed into. Grrrr.
BTW, the error message was a Rosetta Stone message, not a Mac OSX message; I didn't make that clear before.

Web dynpro application not available when running iview wizard

When I run the iview wizard to create a web dynpro iview I find the folder local/<MyProjectName.
But when opening myProjectName folder the Application is missing, so I cannot create the iview.
When running the web dynpro Content Administrator I find the application in the ProjectName folder, but when I try to run it I get the exception:
com.sap.tc.webdynpro.repository.utils.RepositoryException: Did not find application 'MyTestApplication' in repository.
What could be the issue?
B.r
Olof

Hi Siva,
I tried this but it still doesn't work for me:
I get this error
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Cannot open repository for application 'MyApplication'.
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.isAuthenticationRequired(ClientUserFactory.java:316)
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.checkAuthentication(ClientUserFactory.java:244)
     at com.sap.tc.webdynpro.services.sal.um.api.WDClientUser.checkAuthentication(WDClientUser.java:217)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.checkAuthentication(RequestManager.java:626)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:144)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.repository.utils.RepositoryException: Did not find application 'MyApplication' in repository.
     at com.sap.tc.webdynpro.serverimpl.core.repository.AbstractServerRepository.getApplicationInternal(AbstractServerRepository.java:167)
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.isAuthenticationRequired(ClientUserFactory.java:307)
     ... 22 more
Edited by: Olof Trönnberg on Aug 20, 2009 12:42 PM

Problems with User profile Application not available

Hi
Have a 2 tier SP 2010, with SQL server and a single SharePoint2010 server. We have a problem with the User profile Application service.
The main problem is that we cannot go to "Edit" under Manage User Profiles. If we want to edit a user, we just get an error:
"Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: No User Profile Application available to service the request. Contact your farm administrator."
When rebooting the server, we get the following in event viewer: Warning: ASP.NET 2.0.50727.0
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 2/5/2015 12:25:25 PM
Event time (UTC): 2/5/2015 11:25:25 AM
Event ID: 84d104331476453b88c60a37d7a0b8fe
Event sequence: 9
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1212406818/ROOT-1-130676090755160256
Trust level: WSS_Minimal
Application Virtual Path: /
Application Path: C:\inetpub\wwwroot\wss\VirtualDirectories\14877\
Machine name: SPMACHINE
Process information:
Process ID: 4668
Process name: w3wp.exe
Account name: domain\spfarm
Exception information:
Exception type: UserProfileApplicationNotAvailableException
Exception message: No User Profile Application available to service the request. Contact your farm administrator.
Request information:
Request URL: http://sp2010:2010/_layouts/ProfMngr.aspx?ID=51982fe8-4886-4ebd-ad68-f5934656e54d&IsDlg=1
Request path: /_layouts/ProfMngr.aspx
User host address: ::1
User: domain\spfarm
Is authenticated: True
Authentication Type: NTLM
Thread account name: domain\spfarm
Thread information:
Thread ID: 15
Thread account name: domain\spfarm
Is impersonating: False
Stack trace: at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.WebControls.ProfileQueryUsers._FillSubtypeCollection()
at Microsoft.SharePoint.Portal.WebControls.ProfileQueryUsers..ctor()
at ASP._layouts_profmngr_aspx.__BuildControlProfileQuery()
at ASP._layouts_profmngr_aspx.__BuildControl__control6(Control __ctrl)
at ASP._admin_admin_master.__BuildControlPlaceHolderMain()
at ASP._admin_admin_master.__BuildControl__control21()
at ASP._admin_admin_master.__BuildControl__control2()
at ASP._admin_admin_master.__BuildControlTree(_admin_admin_master __ctrl)
at System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
at System.Web.UI.Page.get_Master()
at System.Web.UI.Page.ApplyMasterPage()
at System.Web.UI.Page.PerformPreInit()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Hi Thomas,
Based on the error message, I recommend to verify the things below:
Please make sure that User Profile Service is started in Central Administration.
Please make sure Forefront Identity Manager Service and Forefront Identity Manager Synchronization Service are started in services.msc.
Change the schedule for the "Timer Service Recycle" job to run during off peak hours, when a small amount of timer jobs are running.
Check ULS log for more detailed error message. For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Profitability and Cost management application not available in workspace

Hi All,
I hope somebody in this forum can help me with this.
i have built a profitability and cost management application in workspace . I have validated and deployed it sucessuflly. But when i try to open the application , i am not able to see the profitability section in the open Menu or Navigate menu of workspace.
Can somebody tell what could be the cause for this?
Some Information:
I deployed one application with "Default application group" one with "Profitabilty and Cost Management"
I created the Profitabiilty and Cost Management application Group seperately in Shared Services.
Regards,
Subramaniam Ganesan

Hi Abishek,
The issue got solved after accepting the workspace server settings. Intially it didnt show me the Profitability module on the Edit mode, but when i clicked ok ( i mean accepting) it came though. Not sure how it has happened.
But it is working now.
Thanks for your help.
Regards,
Subramaniam Ganesan

Creative Applications not available on the website? Not fair

I was recently re-installing windows on my pc, which i built my self, so i don't have any tech support...but i had come to the realisation that i no longer had the drivers or software pack with Surround Mixer and useful applications such as that. Now after moving that i didn't have the disk because of moving to the east coast, i was no longer able to use my $400 5. surround sound system to its full extent on my Sound Blaster Audigy LS... It frustrates me to find that all i can get on the internet after searching for weeks, is updates to the software and not the core install file. Why would Creative not include these applications on their website? They seem to be worth no more than drivers and they are needed to completly control you sound system so im sure that risk of pirating isnt it...i just don't get it. Anyone who can help me in anyway i would be most thankful.
-A Frustrated Creative Customer

I don't know so much about the soundcards, but normally although they are called updates they are actually just updated full installs. Try them and see. Failing that I'm sure Creative will send you a new install CD, albeit for a minimal cost.

Applications not available

Similar Messages

Maybe you are looking for