Applications not closing

I don't know if this has started happening since my 10.5.3 update but when some of my apps (Logic, system preferences, finder, mail, etc) will not quit when I quit them. even a force quit won't close, I have to restart. I"ve repaired permissions and still same problem. anyone have any idea of what might be happening or have been experiencing the same problem?

Hi czarthp;
No. Reinstall of OS X is only done as the last resort when all else fails. Generally with OS X it is possible to fix things without have to do a reinstall.
How large is your hard drive? I am trying to get an idea as to the percentage of the drive that is still free. You are getting close to have it full and I am trying to figure out how full exactly how full it is. The more you full a disk under OS X the greater the chances of file corruption.
If you open Disk Utility, you can verify your the disk. To do this highlight your boot disk in the left hand column. Then click the button label Verify Disk over on the right. Please let me know the results of this.
Allan

Similar Messages

I keep getting a message that Firefox is open and not responding. That I have to close the Firefox application or restart my computer. A real pain. Why is the firefox application not closing in English

I keep getting a message that Firefox is open and not responding. That I have to close the Firefox application or restart my computer. A real pain. Why is the firefox application not closing.

Sounds like Firefox is "hanging at exit". That problem is frequently caused by an Extension or a Plugin. Read all of the following articles. 
NOTE: Establish a habit of exiting/closing Firefox with Firefox button > Exit or File > Exit to allow an orderly shutdown of Firefox and closing of all of the files that Firefox has open.
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
#Why Firefox may hang:
#*[http://support.mozilla.org/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.org/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably an Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

MBP not closing applications upon shutdown

I was very happy with Lion, until I noticed that my applications are not closed on shutdown. When my computer restarts every application that I do not force quit prior to shutdown opens.
Any help would be appreciated.

This is not a bug, it is a feature ! From Apple's description of Lion:
Now apps you close will reopen right where you left off, so you never have to start from scratch again. And when you install software updates, you no longer need to save your work, close your apps, and spend valuable time setting everything up again. With Resume, you can restart your Mac and return to what you were doing — with all your apps in the places where you left them.
In the System Preferences --> General pane, there is an option you can unclick that says "Restore windows when quitting and re-opening apps". That may help.

I can not install any flash player version in mozilla browser. In version 10.3 it say : THE INSTALLER WILL AUTOMATICALLY CONTINUE WHEN THESE CONFLICTING APPLICATION ARE CLOSED : MOZILLA FIREFOX

-ITS A NEW COMPUTER
-FIRST TIME INSTALLATION
-FLASH ALREADY INSTALLED ON MS EXPLORER V 9
-WEB PAGES REQUEST TO INSTALL FLASH WHEN SURFING WITH MOZILLA
THE INSTALLER WILL AUTOMATICALLY CONTINUE WHEN THESE CONFLICTING APPLICATION ARE CLOSED : MOZILLA FIREFOX

Save the Flash installer to the desktop and close Firefox via File > Exit Firefox. 
Start the Flash installer via a double-click on the Flash installer icon on the desktop.
If that still gives problems then see:
* http://kb.mozillazine.org/Kill_application

Cursors are not closed when using Ref Cursor Query in a report ORA-01000

Dear Experts
Oracel database 11g,
developer suite 10.1.2.0.2,
application server 10.1.2.0.2,
Windows xp platform
For a long time, I'm hitting ORA-01000
I have a 2 group report (master and detail) using Ref Cusor query, when this report is run, I found that it opens several cursors (should be only one cursor) for the detail query although it should not, I found that the number of these cursors is equal to the number of master records.
Moreover, after the report is finished, these cursors are not closed, and they are increasing cumulatively each time I run the report, and finally the maximum number of open cursors is exceeded, and thus I get ORA-01000.
I increased the open cursors parameter for the database to an unbeleivable value 30000, but of course it will be exceeded during the session because the cursors are increasing cumulatively.
I Found that this problem is solved when using only one master Ref Cursor Query and create a breake group, the problem is solved also if we use SQL Query instead of Ref Query for the master and detail queries, but for some considerations, I should not use neither breake group nor SQL Query, I have to use REF Cursor queries.
Is this an oracle bug , and how can I overcome ?
Thanks
Edited by: Mostafa Abolaynain on May 6, 2012 9:58 AM

Thank you Inol for your answer, However
Ref Cursor give me felxibility to control the query, for example see the following query :
function QR_1RefCurDS return DEF_CURSORS.JOURHEAD_REFCUR is
temp_JOURHEAD DEF_CURSORS.JOURHEAD_refcur;
 v_from_date DATE;
 v_to_date DATE;
 V_SERIAL_TYPE number;
begin
SELECT SERIAL_TYPE INTO V_SERIAL_TYPE
FROM ACC_VOUCHER_TYPES
where voucher_type='J'
and IDENT_NO=:IDENT
AND COMP_NO=TO_NUMBER(:COMPANY_NO);
 IF :no_date=1 then
 IF V_SERIAL_TYPE =1 THEN
 open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
 FROM JOURHEAD
 WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
 AND IDENT=:IDENT
 AND ((TO_NUMBER(VOCH_NO)=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
 OR (TO_NUMBER(VOCH_NO) BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
 OR (TO_NUMBER(VOCH_NO)<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
 OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
 ORDER BY TO_NUMBER(VOCH_NO);
 ELSE
 open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
 FROM JOURHEAD
 WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
 AND IDENT=:IDENT
 AND ((VOCH_NO=:FROM_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NULL)
 OR (VOCH_NO BETWEEN :FROM_NO AND :TO_NO and :FROM_NO IS NOT NULL AND :TO_NO IS NOT NULL )
 OR (VOCH_NO<=:TO_NO and :FROM_NO IS NULL AND :TO_NO IS NOT NULL )
 OR (:FROM_NO IS NULL AND :TO_NO IS NULL ))
 ORDER BY VOCH_NO;
 END IF;
 ELSE
 v_from_date:=to_DATE(:from_date);
 v_to_date:=to_DATE(:to_date);
 IF V_SERIAL_TYPE =1 THEN
 open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
 FROM JOURHEAD
 WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
 AND IDENT=:IDENT
 AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
 OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
 OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
 OR (:from_date is null and :to_date is null ))
 ORDER BY VOCH_DATE,TO_NUMBER(VOCH_NO);
 ELSE
 open temp_JOURHEAD for select VOCH_NO, VOCH_DATE
 FROM JOURHEAD
 WHERE COMP_NO=TO_NUMBER(:COMPANY_NO)
 AND IDENT=:IDENT
 AND ((voch_date between v_from_date and v_to_date and :from_date is not null and :to_date is not null)
 OR (voch_date <= v_to_date and :from_date is null and :to_date is not null)
 OR (voch_date = v_from_date and :from_date is not null and :to_date is null)
 OR (:from_date is null and :to_date is null ))
 ORDER BY VOCH_DATE,VOCH_NO;
 END IF;
 END IF;
 return temp_JOURHEAD;
end;

Help - "Acrobat is being used by another application and cannot open PDF files until the other application is closed."

Hello,
I searched this site and google for this error terminology and come up dry. I support a user who has been for years using Acrobat 5 (yes, I know...) to read files in a client DB program, as well as other PDF files on their PC. In the last week or so, they have started gatting this error "Acrobat is being used by another application and cannot open PDF files until the other application is closed." any time they attempt to open a PDF file attached to an email (via Outlook).
It is my understanding that they cannot upgrade to a newer version of Acrobat because of limitations of their client software, but had not previously had any issues viewing PDF notes from the DB, and PDF attachments in their email.
I have tried uninstalling and re-installing, as well as tried using Adobe Reader 7 & 9 in conjunction with Acrobat to try to get around this issue, but have not been successful.
Any ideas?
Thanks,
Jesse

I don't have an answer to your technical problem. The product I assume is Acrobat that you are talking about (based on the post title), Adobe is the company name. This is a good place to ask questions on Acrobat if folks can figure out what you are talking about. They will ask for the product version number (like AA9.3.3), operating system, and other applications if appropriate. Also, just what you are doing that generates the message.
As for Adobe, you are not likely to get an answer from them here in the user forum. You will be lucky if you can get an answer if you can contact them and not be on hold for more than an hour (sorry, this is why a lot of folks end up in the forum).
So, to help others try to answer your question, what are the products and versions involved? What OS? What are you doing when the message comes up.

In App Store I'm blocked on the window of a certain application, not possible to get out of it

In App Store I'm blocked on the window of a certain application, not possible to get out of it

Try closing the App Store app via the iPad's multitasking bar and see if it works ok when you re-open it :
iOS 7 : double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with the App Store 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Can't Open 3rd party Apps with my User (Icon Bouncing then Application Not Responding)

Hi
Problem:
I can't Open 3rd Part Apps with my user (FireFox, Chrome, Dropbox, GoogleDrive, Mega, Final Cut Pro X, etc) they just star bouncing and after a while they stop bouncing then i righ click on them and it says "Application Not Responding", but i can open native apps like Safari, iTunes, iMovie, Finder, Settings
Other Events:
-Just Before this happend i was editting a video on FCPX, y export it and tried to upload to Google Drive (in Chrome), when it was uploading I closed FCPX and the uploading stop it at 91%, y tried to reupload but then I realized that this video was in a temp folder and it wasnt there anymore, so I open FCPX to export it again and i couldnt, it was just bouncing and then "App not responding".
-After Installing Yosemite i feelt it slow even after it finished the encriptation File Vault, specially in chrome.
I have tried:
1-Repair Disk Permisions
2-Reset SMC
3-Reinstall FCPX
4-Decrypted the Disk and create another user and i was able to run Chrome, FireFox and FCPX, When I opened FCPX it started but when it was trying to open the project that i was working , it restarted the app and i couldnt open FCPX again, just bouncing and App Not Responding
Any suggestions to keep my User working?
Macbook Pro Mid 2012
-OSX Yosemite,
-16GB Ram1600MHz DDR3
-750GB 5400RPM
-2.9GHz dual-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 4MB L3 cache

Yes, as long as you let TM do a full disc backup (that is, you do not exclude anything in the TM backup settings) you will have a backup that allows a full system restore - puts everything back just as it was.
You can also clone your system using the shareware app SuperDuper or the donation-ware app CarbonCopyCloner
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.bombich.com/
Both of these apps will make a true clone (literally, a bit-by-bit copy) of your hard drive onto an external drive. This clone will actually be bootable itself (you plug in the drive and hold the option key during startup then select the clone to boot from). You would boot from the clone, then reverse-clone it back onto your internal hard drive.
If you are really serious about being highly confident of not loosing files, you could use both - I keep a TM backup on one drive, and 2 clones on separate bus-powered hard drives.
P.S. even if you had not had any issues, you really, REALLY should be keeping regular, up to date backups anyway - things go flooey without warning sometimes and you risk loosing everything on your machine if you DON'T keep regular backup copies available.

AS Java sessions are not closed until they time out

Hello Experts,
we have a SAP PI system to integrate SAP R/3 with external applications and recently we are facing a problem with inactive sessions. There's a new application we are setting up that consumes a webservice published by this SAP PI system. The scenario is SOAP --> PI --> PROXY. What we have noticed is that when the application sends loads of requests sometimes the system fails. This is because we are reaching the maximum number of open sessions in AS Java (1000). Investigating a bit more we found out that the sessions are not "closed" once the communication between the application and SAP PI has finished. Those sessions are open until they are automatically timed-out by the system after 1800 sec.
We have found the notes below in SAPNet:
Note 1363751 - ICM: Java Web sessions are not terminated
Note 1307940 - New HTTP session opened for every web service call
However, none of them are applicable to our system because it is more updated:
SAP PI 7.1 EHP1 SP002
Kernel Patch Level: 87
We have tried to close connections from the application that consumes the webservice but with no success. The sessions remain in the server until they are timed-out. Could you please tell us if this is the normal behavior of an AS Java system? Is this the way it should work? If so, can you tell us how to decrease this timeout so the inactive sessions are cleaned faster? We tried to find it but we didn't manage. Is there any way to close the session once the communication has finished?
Thank you in advance.
Roger Allué i Vall

Hi Roger,
You can do the following things to help solving your issue:
1. Decrease session timeout default value of the web container: Use the NetWeaver Administrator
Open Application Modules plugin within NWA
Configuration Management -> Infrastructure -> Application Modules
Set the desired timeout web module you are using, in minutes.
The default value 0 in the NWA means that the value is not modified
and the default value of 30 minutes timeout will be used.
2. Increase the max. no. of Sessions in Configtool
The max. number of Sessions can be set in Configtool in the Expert
mode. There is no limitation for the parameter.
Thanks,
Anderson

Why the photo app is not closing after i finish, when i take a picture accessing directly from home screen. the location is draining my battery if I'm not closing the app by double click home button. in iOS 6 was not like this

When im taking a picture directly from home screen after im finished the application remain open. This app is ussing the location and if im not closing like other applications by doble click the home button the batery will finished fast. On the other IOS 5 and 6 was not neccesary to unblock the phone and bouble click the home bottom.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Outlook 2013 are not opening and showing pst files are not closed properly

Hi
Outlook 2007 has stopped working and showing close the program. Again,we re-started then outlook 2007 and it has opened and taken the backup of pst files in a separate hard drive.
The pst file was repaired in scanpst.exe and again i have tried to put the pst file back in outlook 2007.It was hanging and suddenly i have uninstalled 2007 and started installing outlook 2013.
2013 applications like word,excel,power point are opening and outlook 2013 are not able to open and showing pst files were not closed properly.
Again i have un-installed and re-installed the outlook 2013.still we are not able to open the outlook.
Need your support at the earliest to fix the issue.
Thanks

Hi,
What's the .pst file used for? Archive? Or you set up a POP3 account and want to import the emails from the .pst file?
Another question, you mentioned you installed Outlook 2013 and it didn't open either. Was this from the beginning right after you installed Outlook 2013, or after you did something such as create a new Profile, set up a new account and tried to import the
.pst file?
Kindly answer my questions so I can understand the situation better.
I've seen some of this issue caused by the anti-malware software, check your anti-malware software to see if it's trying to interfere with Outlook - things like real time email checking can sometimes cause these kinds of problems. To troubleshoot, we can
simply disable the anti-malware software temporarily to see the result.
Regards,
Melon Chen
TechNet Community Support

Connection not closed in the database server end

Hi,
Our database server (sql server 2000) and java application are running in two different boxes. Because the java application sent to the db server quite a few queries that can not be completed (applications hangs there) due to huge amount of data (18 million records in one table and 1 million records in another table and there are joins among the three tables), we stopped the java program. However, in the db server end, the connections associated with these problem queries were not closed although the java app end already closed these connections by calling connection.close(). When this happened, we have to manually close the connection from sql server enterprise manager.
Here are the questions.
1)what could be the reason why db server does not close the connection?
2)Is there any solution in the java end that could close the connection in the db server end when this situation happens? I say this situation happens, I mean in most cases when java application closes connection, db server closes connections in its end too.
Thanks
Mark

mark.lin wrote:
Thanks for your answers and questions.
Here are the answers to your questions
1)The jdbc driver is jturboJTurbo? Never heard of it. You mean this?
http://www.newatlanta.com/products/jturbo/index.jsp
Why pay for something when you have two options available that are free? One of them is from Microsoft itself. Whose idea was this?
2)It's a desk top application.
It seems to me that it should not be driver issue. I was this happened the Microsoft's own jdbc driver. By jdbc specification, although you don't close the connection explicitly in the program, the connection will be automatically closed in the java app end during garbage collection. Very bad - never depend on this. Always close your ResultSet, Statement, and Connection in reverse order of opening in a finally block, each one wrapped in individual try/catch blocks.
One should never, ever depend on the GC to take care of resources like database connections or resource handles. Those should be cleaned up by your code.
I tested this by intentionally not closing a connection. When I stops the application, the connection in the sql server end was also closed.
But if you don't close the application and fail to close connections, you can see where eventually you'll exhaust the pool.
It seems to me this is a sql server issue rather than a jdbc driver issue. I need way to prove this.
Like I suggested, it's easy to swap in the jTDS driver and try it again. What do you have to lose?
Or call Microsoft support and ask them. Or maybe JTurbo. You're paying for it - might as well use the support.
%

AIR application not installed

Hi all,
My AIR application not installed.
AIR application installer shows window with 'Getting ready to install..." and window closed and nothing happens. What I'm doing wrong and where I can see an 'installation log' to obtain the root reason of AIR installation problems?
My env: Fedora 12 x64, AIR and AIR SDK just downloaded and installed from site. All AIR SDK applications (adl and adt) works well.
Sergey

Thank you for your reply!
airappinstaller throws SIGSEGV signal.
I trace it in gdb and see that libxml2::xmlHasProp throws this signal because it receive an invalid node pointer from libadobecertstore.so.
So I can't find or obtain debug symbols for adobeair-1.5.3-9130.i386 and I don't know what I should do to fix a problem...

OC4J AQ/JMS - Logging DriverManagerConnectionPoolConnection not closed

Hi,
Since I do not directly utilise JDBC resource, I cannot work out how I might investigate this supposed leak.
Every now and then (and it does appear to happen sporadically - I cannot identify a pattern), I get the
messages.
DriverManagerConnectionPoolConnection not closed, check your code!
I turned the logging on (using -Djdbc.connection.debug=true), and the following exceptions is thrown:
Created at:
java.lang.Throwable: DriverManagerConnectionPoolConnection created
at com.evermind.sql.DriverManagerConnectionPoolConnection.<init>(DriverManagerConnectionPoolConnection.java:27)
at com.evermind.sql.DriverManagerPooledConnection.getNewLogicalConnection(DriverManagerPooledConnection.java:341)
at com.evermind.sql.DriverManagerPooledConnection.getConnection(DriverManagerPooledConnection.java:117)
at com.evermind.sql.OrionPooledDataSource.getConnection(OrionPooledDataSource.java:235)
at com.evermind.sql.DriverManagerXADataSource.getNonAutoCommitConnection(DriverManagerXADataSource.java:285)
at com.evermind.sql.DriverManagerXAConnection.start(DriverManagerXAConnection.java:101)
at com.evermind.server.TransactionEnlistment.<init>(TransactionEnlistment.java:45)
at com.evermind.server.ApplicationServerTransaction.enlistResource(ApplicationServerTransaction.java:247)
at com.evermind.sql.OrionCMTConnection.tryToDelistEnlist(OrionCMTConnection.java:308)
at com.evermind.sql.OrionCMTConnection.intercept(OrionCMTConnection.java:112)
at com.evermind.sql.FilterConnection.getTypeMap(FilterConnection.java:135)
at com.evermind.sql.FilterConnection.getTypeMap(FilterConnection.java:136)
at oracle.jms.AQjmsConsumer.dequeue(AQjmsConsumer.java:1240)
at oracle.jms.AQjmsConsumer.receiveFromAQ(AQjmsConsumer.java:981)
at oracle.jms.AQjmsConsumer.receiveFromAQ(AQjmsConsumer.java:918)
at oracle.jms.AQjmsConsumer.receive(AQjmsConsumer.java:834)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:905)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797)
at java.lang.Thread.run(Thread.java:479)
Here is the ejb.jar sections of interest:
<transaction-type>Container</transaction-type>
<acknowledge-mode>Auto-acknowledge</acknowledge-mode>
<message-driven-destination>
<destination-type>javax.jms.Queue</destination-type>
</message-driven-destination>
<resource-ref>
<res-ref-name>jms/MessageQueueConnectionFactory</res-ref-name>
<res-type>javax.jms.QueueConnectionFactory</res-type>
<res-auth>Application</res-auth>
<res-sharing-scope>Shareable</res-sharing-scope>
</resource-ref>
<resource-env-ref>
<resource-env-ref-name>jms/MessageSendQueue</resource-env-ref-name>
<resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
</resource-env-ref>
<resource-env-ref>
<resource-env-ref-name>jms/MessageStatusQueue</resource-env-ref-name>
<resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
</resource-env-ref>
Here is the orion-ejb.jar <enterprise-beans> definition:
<enterprise-beans>
 <message-driven-deployment name="MessagingServer" destination-location="java:comp/resource/CallistaMessagingJMSContext/Queues/CORQ_MSG_SEND_QUEUE" connection-factory-location="java:comp/resource/CallistaMessagingJMSContext/QueueConnectionFactories/jmsFactory" max-instances="100">
 <resource-ref-mapping name="jms/MessageQueueConnectionFactory" location="java:comp/resource/CallistaMessagingJMSContext/QueueConnectionFactories/jmsFactory" />
 <resource-env-ref-mapping name="jms/MessageSendQueue" location="java:comp/resource/CallistaMessagingJMSContext/Queues/CORQ_MSG_SEND_QUEUE" />
 <resource-env-ref-mapping name="jms/MessageStatusQueue" location="java:comp/resource/CallistaMessagingJMSContext/Queues/CORQ_MSG_STATUS_QUEUE" />
 </message-driven-deployment>
</enterprise-beans>
The orion-application.xml has the following resource provider mapping for the OJMS Context:
<resource-provider class="oracle.jms.OjmsContext" name="CallistaMessagingJMSContext">
<description> OJMS/AQ </description>
<property name="datasource" value="jdbc/ejb/CallistaMessageOwnerDS" />
</resource-provider>
Here is the matching 'jdbc/ejb/CallistaMessageOwnerDS' datasource definition for the JMS:
<data-source
 class="com.evermind.sql.DriverManagerDataSource"
 name="CallistaMessageOwnerJDBCDatasource"
 location="jdbc/CallistaMessageOwnerCoreDS"
 xa-location="jdbc/xa/CallistaMessageOwnerXADS"
 ejb-location="jdbc/ejb/CallistaMessageOwnerDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
 username="*********"
 password="****"
 url="jdbc:oracle:thin:@myhost.com.au:1529:ORCL"
 inactivity-timeout="30"
/>
I would appreciate any input into any mistakes I may have made (perhaps I need to use a different datasource, or define it in a different way)
Any help - including an indication that this is an error I can safely ignore :-) would be appreciated.
Thanks
Jason

I'm have the same issue. I'm currently trying to seen if the Oracle 9.2.0.5.0 patch corrects the issue (waiting for the file down load). There is a known issue in Oracle and cleaning up Inactive connections. I assuming the two are related ... I hope it works.

While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms

Hi,
Please advise on the below issue.
While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms.
May i know what is to be done?

MoNo wrote:
Hi Friends...
I'm using windows7 32 bit.
<snip>First, please be aware that oracle products are NOT certified to run on ANY 'home' edition of ANY version of Windows.
Second, did you read the instructions on the page where you downloaded the software -- specifically the part about unzipping TWO downloaded zip files into the SAME directory?
Third, did you read and heed the installation guide, or did you just go straight to 'setup.exe'?

Applications not closing

Similar Messages

Maybe you are looking for