Applications opening off the desktop.

Hello,
Applications keep opening in a position where I cannot use them. In the image I have opened Filezilla and its opened to the right of the desktop but its unusable. 
Any help would be greatly appreciated!
Chris

Open the AppleScript Editor in the /Applications/Utilities/ folder and run:
tell application "Filezilla"
set bounds of window 1 to {0, 22, 1681, 848}
end tell
(83000)

Similar Messages

  • Why can't I have two applications open on the desktop at the same time ?

    I can, it seems, with two Mac applications (eg Numbers and Pages) but cannot with non-Mac software. For example I would like to have Firefox (web broswer) open at the same time as running Songbird (music player). But when I click on one the other minimises to the dock. I've tried varios combinations of holding companion keys down when I click (CMD, Shift etc) to no avail.

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Internet icon
    Click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Share a public IP address
    Click Update to save settings
    Wait a full minute for the Time Capsule to restart, then check the network again.

  • Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window.  Can't make it fill the screen. Just switched from windows.  Thank you.

    Put my macbook pro to sleep. When I opened it, the desktop window is small and I can't resize it. All applications now run in the smaller size window.  Can't make it fill the screen. Just switched from windows.  Thank you.

    Check to see if the resolution has been changed in System Preferences.
    Allan

  • I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!

    I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!

    Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.

  • How do i get things off the desktop once it has been put in the trash? it shows that its in the trash, but it wont get off my desktop!!!!!It wont open from the desktop either!!!!

    How do i get things off the desktop once i put it in the trash? it shows in the trash but it wont get off my desktop..... it wont open from the desktop either????

    There are several ways. The two easiest are to click the Junk icon to turn it off or right click the message and select Mart As-Not Junk.

  • Safari. wont open off the doc

    Hi need help running 10.3.9 panther i cant get safari to open off the doc. up next to the blu apple on the header bar it says safari so something is happening but the program wont open all hte way. If i try to open directly by opening the hard drive icon then finding safari in the applications folder and double clicking i get the same results. thanks djcappy1

    Welcome to Apple Discussions
    Sounds like there is file corruption.
    Here are a few suggestions: (each one requires moving a file or folder to the desktop and restarting Safari. If no resolution, move the item back to its original location and try the next suggestion.)
    These items are found in your User Library:
    Preferences folder - .com.apple.safari.plist - this is the Safari preferences file. If Safari becomes functional, then you'll need to reset any customized settings once the program opens.
    Safari Folder - holds your bookmarks, download, history and icons (favicons). Move the entire folder to the desktop. If the program opens, then one of these files is corrupt. On the restart, Safari automatically creates a new folder. So, if Safari works, then move one at a time (restart Safari each time) the various items in this folder into the newly created Safari folder. If Safari crashes you've found your corrupted file.
    If none of the above works, then try Safari from another User Account (you may have to create one in System Preferences). If Safari doesn't work there then your problem is system-wide.
    Post back with results.

  • Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac.

    Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac. I have background switching unchecked in my preferences, and I have never selected it as an option. Also, when I go to my preferences, it will show the icon of the picture I changed it to, even though the desktop itself has switched back.

    I would start with some basic troubleshooting.
    REPAIRING DISK PERMISSIONS -
    NOTE: refer to article "About Disk Utility's Repair Disk Permissions feature" found here http://support.apple.com/kb/ht1452 - for the actual apple article on these step. ----
    - click finder in the bottom dock, and in the window that opens, select applications in the left column - scroll through until you see the 'Utilities' folder and double click to open it.  Then double click on 'Disk Utility'
    - When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
    - ensure the the "first aid" tab is highlighted blue in the middle of the screen
    - click the button at the bottom that says 'Repair Disk Permissions'
    - this process will take a few minutes to run.  It will indicate it's done, by scrolling to the bottom of the "details area" displaying 'Permissions repair complete'
    Dan Frankes has written an excellent article for Macworld on "Permissions" and the need to repair them - see - http://www.macworld.com/article/52220/2006/08/repairpermissions.html.    Another good web site is - http://www.thexlab.com/faqs/durepairfns.html.
    REPAIRING DISK - About OS X Recovery - http://support.apple.com/kb/HT4718.
    - restart your computer hold down command + R keys on the keyboard to boot you into Lion / Mountain Lion Recovery mode
    - select english as your main language then the continue arrow
    - select "Disk Utility" on the resulting screen then 'Disk Utility' ---
    - When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
    - ensure the the "first aid" tab is highlighted blue in the middle of the screen
    - click the button at the bottom that says 'REPAIR DISK' .......NOT "Repair disk permissions"
    - this process will take a few minutes to run.  It will indicate it's done, by scrolling to the bottom of the "details area" displaying "The Macintosh HD appears OK"
    If you get any other message OTHER than "The Macintosh HD appears OK", like "the Macintosh HD was repaired successfully" run the "Disk Repair" again, until it displays  "The Macintosh HD appears OK".
    Once done, restart the computer as normal

  • Trying to get to app "off" the desktop, clamshell to internal display probl

    I'm only seeing this problem with one application but it's a problem.
    For a while now I've been running in clamshell mode with my external display at a fairly high resolution. I had an application window in the far right hand corner of my screen where I could use it as needed. I shut down and am now working from the internal display which has a lot lower resolution.
    When I invoke almost all the applications, they are smart enough to realize the reduced desktop resolution and open somewhere on the desktop. However there is on application that is trying to position in the same absolute position which means I don't get any access to that application. I know the app is there because if I scroll from one panel to another in Spaces, I see the application window go by.
    Is there any way to "scroll off" the desktop to that position and drag the app window back to the current desktop? The only solution I found was to remember to move the application to some other place on the desktop before I stop using clamshell mode.
    Thanks

    Just hold the app down until the all start to 'wiggle', then drag the app or apps you don't want from your home page to a new page.
    You can't delete it, or any of the standard iPhone apps, but this gets them out of your way.

  • Off the desktop?

    While reading an email, I decided to save an attachment by dragging it onto my desktop. The problem is, the email window was open which left only a sliver of my desktop visible. I dragged the icon of the attachment onto the part of the desktop that was there, but now I can't find the file. Is it possible that the file was saved off the desktop in an area that I can't see?
    Mahalo for your help!

    If you are using the Mail application to access your email, you can avoid this in the future by using the "save" feature next to the attachment in your email--then you can choose where you want to save it without needing to try to drag to the tiny little space around the email window.
    Maxit

  • How do I stop my MacBook clearing the icons off the desktop when I switch off

    How do I stop my MacBook clearing the icons off the desktop when I switch off the machine?

    Hi Matt
    After I create say a word document, file it on my desktop and then shut down my machine. The next time I open up the MacBook the file icon has been removed from the desktop. I can still retrieve the file in a folder labeled with the month I created it. But why has the OS removed it from the desktop and how can I stop it happening?
    It happens to alias icons as well!
    Regards

  • TS3276 Mail shows in the doc, but when clicked or doubled clicked does not open on the desktop, HELP !

    Mail shows in the doc, but when clicked or doubled clicked does not open on the desktop, HELP !

    Try restarting your Mac.
    Open Termimal (Applications/Utilities/Terminal)Try entering this command: killall Dock, and then hit enter
    Try dragging the Mail icon out of the dock, then let it disappear in a puff of smoke. Then from Applications/Mail try dragging the Mail icon back into the dock, and see if it works.
    Does Mail open otherwise? Like if you try opening it from your Applications folder?if it doesn't:
    Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
    if that doesn't work: reinstall Mavericks over your current installation.
    Message was edited by: arthur

  • How do i get the mail if i deleted it off the desktop you know the stamp?

    i deleted the stamp and mail off the desktop how do i get it back joe

    Go into applications and drag it or copy to your doc, u might need to go into utilities folder.

  • I moved my applications folder to the desktop, but modified the applications in my dock, and now i have too many copies of the applications folder and cant get rid of them without being unable to use the applications :(

    I moved my applications folder to the desktop when i first got my imac. now i want to get rid of it, but when i put it in the trash, it wont let me use the applications, even though they are in more than one folder. I am at a loss of what to do now cause i have two copies of everything. please help me figure this out.

    Marisalynne wrote:
    I have the applications folder in my harddrive and then the one that I moved to my desktop when I first got my computer.
    Where was the one that you moved to your desktop before you moved it to the desktop?
    I really don't understand what you're trying to say. If I have a folder in A, and I move it to B, then the folder will be in B. There is no duplication. I still have only one folder, only the location is different.
    Furthermore, your desktop is on your hard drive. Everything is on your hard drive.

  • Why won't new version 4.0 open on my desktop while version3.6.17 works fine. When I check the processes running on the computer the firefox is running but it won't open on the desktop(monitor)

    When I updated firefox from version 3.6.16 to 4.0 the program would not open on the desktop after I double-clicked the short cut on the desk top. I checked the processes running on the computer and it showed firefox running. I followed the short cut to its file and clicked on the executable file with the same result(it won't open). I went back to the previous version and it works fine. What could be the problem?

    Hey djclark24,
    Have you tried starting Firefox in Safe Mode? Hold down "shift" while Firefox is starting up. If the crash doesn't happen in Safe Mode, you should read [[Troubleshooting extensions and themes]].
    There is also a lot of useful stuff in the [[Firefox crashes]] Knowledge Base article.
    You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
    Hopefully this helps!

  • Since installing Lion, no Finder window will open on the desktop.  I can see them through "Quick Look" and "View all Windows" in the contextual menu for Finder in the

    Since installing Lion, no Finder window will open on the desktop.  I can see them through "Quick Look" and "View all Windows" in the contextual menu for Finder in the dock.

    Help please!

Maybe you are looking for

  • Background task problem with alv grid display

    Hello ! I have a problem when executing my program in background. In foreground I have no problem, my ALV appears. In the background I have a dump. The current ABAP program "SAPLKKBL" had to be terminated because one of the statements could not be ex

  • Problem setting up crontab for cyrusimap

    Greetings all. I've just finished setting up OS X Server 10.4.10 on an intel mac, and was trying to setup a crontab for cyrusimap to make sure that all mail for JUNKMAIL and NOTJUNKMAIL users is deleted automatically using ipurge. I created the follo

  • Replication of enhanced Sales Order to R3

    Hi, We have extended sales order on CRM using EEW. This has extended corresponding BDocs. Now when we create the order the additional fields are being replicated to mobile however we want to map them to 'Z' fields in R/3 as well. The R/3 sales order

  • Copying data for custom includes in FB50

    I have added new fields to FB50 by using the screen painter in SAPLFSKB screen 100. I created new fields in CI_COBL called ZZNAME1 and ZZPARVW. These now appear on FB50. The problem is, data that is entered into those fields disappears when trying to

  • Tab delimited text file

    Hi,     Can someone provide me a sample code on how to read data from a tab delimited text file into an internal table?. Thanks, Sandeep