Applications Quitting for No Reason

Since I installed OS 4.1 on my iPhone 3G, my applications quit for no reason. Specifically, Facebook and Safari. With FB, it quits on me when I'm trying to post a line of text. Safari quits when I'm trying to load a page.
Will there be a OS 4.2 to fix these problems?
Thanks

This is a user-to-user forum. No one here knows what will be released or when.
And Apple never tells.
Try restarting the phone (shut it down, but hold it for 10 or 15 seconds beyond the point where the "slide to power off" appears).
This often helps.
coop

Similar Messages

  • I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

    I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .

    Depends on what you had
    If you had iPhoto version 9.5.1 then you can reinstall from the app store under purchases
    If you had any version of iPhoto '11 then you can install for free from the App store
    If you had any earlier version of iPhoto (iPhoto '09 version 8.x.x) or older then you need to purchase iPhoto '11 version 9.x.x from the app store
    If you had iPhoto '08 (version 7.x.x) or older then you also need to download and run the iPhoto library upgraded prior to launching the new iPhoto
    LN

  • TS1702 iBooks keeps quitting for no reason

    iBooks keeps quitting for no reason. So tedious, so fed up with the app.

    You might have a corrupt PDF file in iBooks, a corrupted book download, the app itself might be corrupt.....have you tried deleting the app and reinstall it? You can download your books again from the purchased tab of the iBooks app. If you sync with iTunes, you can sync all of your books back to the iPad after you delete the app and reinstall it.
    In the meantime, you might want to just try quitting the app, reboot the iPad and then see how the app behaves.
    Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the iBooks app and then swipe "up" on the app preview thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • IMovie quits for no reasons and its options get reset

    Just a bit ago, i was using imovie and then it quit for no reason, and it has beend oing that reciently, but I can get up fine. This time, it quit and it reset its options and I didn't tell it to do that. What is going on an d how can I fix this?
    the project seems to be uneffected.

    Perhaps you answered your own question. Garbage
    Collection.
    You need to save a reference of your implementation
    class or it will be eaten by the GC. You can do this
    by having a private Object within your Class.
    You need to keep the Server alive. Once the RMI
    Runtime had a "keep alive" thread for this but in
    newer (SDK1.4+) versions it's now up to you.
    We use this in our main() method that starts the
    server:
    Object forever = new Object();
    ... in a sync block
    wait(forever);This sounds like it is right on the money, but could you please spell out in a little more detail what I need to do? As I mentioned, I start the server like this:
    java -classpath dermpathApplet.jar:mail.jar:activation.jar:mysql-connector-java-3.0.11-stable-bin.jar com.edermpath.dermpath_client.DPAppletServer &
    DPAppletServer is very simple, looks like this:
    public class DPAppletServer {
    public DPAppletServer() {    
    public static void main(String args[]) {
    try {
    new DPAppletServer();
    DataAccessImpl da=new DataAccessImpl();
    java.rmi.Naming.rebind("rmi://www.dp.mcw.edu/com.edermpath.dermpath_client.DataAccess",da);
    etc
    Do you mean that I need to modify DPAppletServer? Or DataAccessImpl? How would a private object prevent the server from being garbage collected? Where does the sync block go? Is it just for a separate thread that waits forever??
    Thank you very much for your help!
    dermite

  • Mail unexpectedly quitting for no reason

    Wonder is anyone can help, I have been running Mail under 10.5.1 for some time now with no problems.
    This morning I logged in, launched Mail and everything was fine until it tried to connect and download mail and then it unexpectedly quit. This is repeatable every time and I have no idea why it is doing it.
    Anyone got any suggestions as to how to tackle it?
    Thanks
    PS no new software or plug ins have been added in between the time it was working and not.

    Dear bneely
    I wonder if you can help me?
    I am having problems with Mail quitting for no reason almost as soon as I open it. It is clearly trying to bring mail in, but I have left it for hours and it either quits or just keeps trying ...
    I have Entourage which, in desperation, I have been using, but I would much prefer to get mac Mail operational again. Here is the information that you say will help you to see what might be happening:
    Thread 0 Crashed:
    0 com.apple.AppKit 0x964ba6b5 loadItemEntryLazyInfoIfNecessary + 37
    1 com.apple.AppKit 0x965b216f findAndLoadRowEntryForUnloadedLazyItem + 69
    2 com.apple.AppKit 0x965b20bb -[NSOutlineView rowForItem:] + 147
    3 com.apple.mail 0x0020291f 0x1000 + 2103583
    4 com.apple.mail 0x00018b97 0x1000 + 97175
    5 com.apple.mail 0x0005a754 0x1000 + 366420
    6 com.apple.AppKit 0x965a75c5 -[NSMenu _enableItem:] + 436
    7 com.apple.AppKit 0x965b2b41 -[NSMenu _enableItems] + 175
    8 com.apple.AppKit 0x96584d50 AppKitMenuEventHandler + 670
    9 com.apple.HIToolbox 0x93b9a863 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1181
    10 com.apple.HIToolbox 0x93b99c9d SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
    11 com.apple.HIToolbox 0x93bb608e SendEventToEventTarget + 52
    12 com.apple.HIToolbox 0x93bf3b77 SendMenuOpening(MenuSelectData*, MenuData*, double, unsigned long, __CFDictionary*, unsigned char, unsigned char*) + 797
    13 com.apple.HIToolbox 0x93bf3555 DrawTheMenu(MenuSelectData*, __CFArray**, unsigned char, unsigned char*) + 231
    14 com.apple.HIToolbox 0x93c62df4 OpenSubmenu(MenuSelectData*, MenuData*, unsigned char, unsigned char*) + 234
    15 com.apple.HIToolbox 0x93bf238f TrackMenuCommon(MenuSelectData&, unsigned char*) + 1915
    16 com.apple.HIToolbox 0x93beddc9 MenuSelectCore(MenuData*, Point, double, unsigned long, OpaqueMenuRef**, unsigned short*) + 279
    17 com.apple.HIToolbox 0x93bed91d _HandleMenuSelection2 + 383
    18 com.apple.HIToolbox 0x93bed791 _HandleMenuSelection + 53
    19 com.apple.AppKit 0x964c339b _NSHandleCarbonMenuEvent + 244
    20 com.apple.AppKit 0x9642a1f4 _DPSNextEvent + 1834
    21 com.apple.AppKit 0x964296a0 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
    22 com.apple.AppKit 0x964226d1 -[NSApplication run] + 795
    23 com.apple.AppKit 0x963ef9ba NSApplicationMain + 574
    24 com.apple.mail 0x000fa08e 0x1000 + 1020046
    Many thanks for looking at this for me, hoping you can help.

  • Mac Mail Unexpectedly Quits for no reason

    Hi - yesterday my mac mail started to play up and I am not sure why? I have not done anythin differently - but totally randomly, not when I am doing anything or if I am just browsing folders in Mac Mail the application quits. It has just done it again this morning which is the 4th time since yesterday afternoon.
    Any help would be greatly appreciated. I did a search on the forums for this and found people had this problem when starting up - I have no problem starting up. Another thing I have noticed recently is that when I do switch between folders it takes a while to load the preview (longer than it used to) so not sure if that has anything to do with it.
    Also - because of this any advice on how to back up my messages in mac mail quickly and easily would be great!
    Mac Mail Version 2.1 - MacBook Pro

    Hi Tarquin.
    Verify/repair your disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    When an application crashes (i.e. quits unexpectedly), the system writes information about the state of the application at the moment of the crash into a log file. That information is called a crash report and it makes troubleshooting much easier. In order to find and paste the relevant part of the crash report here, proceed as follows:
    1. Open ~/Library/Logs/CrashReporter/Mail.crash.log. The whole Mail crash log appears on a Console window (you can also open that file with any text editor). It may contain many crash reports. We only want the latest, which is located at the bottom of the file.
    2. Look for a line that begins with "Date/Time:" as close to the bottom as possible, and another that says "Thread N Crashed:", where N is a number. Select everything from the "Date/Time:" line to the lines immediately following "Thread N Crashed:". Copy that text and paste it here. Do not post the whole crash log, and do not include anything beyond the lines immediately following "Thread N Crashed:" either, just the relevant part.
    Take a look at the following thread for examples of what a crash report looks like:
    http://discussions.apple.com/thread.jspa?threadID=466701
    any advice on how to back up my messages
    Mail stores most preferences and all account settings in ~/Library/Preferences/com.apple.mail.plist. Everything else, including all your messages and mailboxes, is stored within the ~/Library/Mail/ folder.
    Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

  • Active screen corners suddenly quits for no reason

    Friends,
    Active screen corners sometimes suddenly quits on me for no reason. I'm breezing along, doing my thing and periodically moving the mouse to one corner to "show desktop" or another to show "all windows." Suddenly, moving the mouse to the corner does nothing. I can't predict when this will occur. Restarting solves the problem.
    Any ideas?
    Thanks!
    Steve

    Are you using an external monitor, but not all the time? I get the exact same behavior sometimes when I disconnect my MacBook Pro from my external monitor and then try to activate Expose using active screen corners. It simply doesn't work. However, if I restart, everything works just fine because Leopard recognizes my laptop screen as the primary display. Seems like a bug to me, but I'm not sure. I'd like to hear from others who may know more about the issue.
    Message was edited by: Joshua Kaufman

  • Upgrading/re-installing application quits for User

    When I re-instllaed Sorenson Squeeze it would not start "The application unexpectedly quit... etc" No amount of re-installing, optimizing, etc would fix this. The work-around was to create a new User and install it from there. No more problems.
    Then the same thing happened with an upgrade of Motion. "The application unexpectedly quit... etc". Installing it from the apternative User solved the problem, but Motion will only run from that User account.
    Today it happened to a colleague who was upgrading iShell from 4.0r9 to r10. He kept receiving a "Process Error (-600)" and nothing would open. I suggested the new User trick and it worked for him.
    A nice work-around, but there is obviously a problem here. This did not happen in 10.3. Any ideas about what's going on?

    Thanks macjack for a speedy and really helpful reply - it's filed. I've already tried the fonts and permissions, but I just went through your suggestions again with Motion. No joy I'm afraid. Here's the relevant bit of the crash report (I think - it's witchcraft to me)
    Thread 0 Crashed:
    0 com.apple.CoreFoundation 0x907c7af0 CFGetAllocator + 24
    1 com.apple.CoreFoundation 0x907c84ac CFURLCopyFileSystemPath + 28
    2 Ozone 0x011b6df4 +[OZFileSystemLibEntry buildTree] + 532
    3 Ozone 0x01356fb0 -[OZFileBrowserController buildTree] + 96
    4 Ozone 0x0135b920 -[OZLibraryControllerBase viewDidLoad] + 3888
    5 Ozone 0x013569b8 -[OZFileBrowserController viewDidLoad] + 104
    6 Ozone 0x0108d8a0 -[OZPBXModule _viewDidLoad] + 288
    7 Ozone 0x0108d2ec -[OZPBXModule view] + 124
    8 Ozone 0x0117a5f4 -[OZTabbedModule addTabViewItem:module:] + 68
    9 Ozone 0x01146710 -[OZLibraryInspectorController viewDidLoad] + 128
    10 Ozone 0x0108d8a0 -[OZPBXModule _viewDidLoad] + 288
    11 Ozone 0x0108d2ec -[OZPBXModule view] + 124
    12 Ozone 0x0108fda4 -[OZPBXWindowController _installModuleView] + 100
    13 Ozone 0x010905c4 -[OZPBXWindowController initWithModule:] + 68
    14 Ozone 0x0108f760 -[OZPBXModule setWantsModuleWindow:] + 192
    15 Ozone 0x011464c0 +[OZLibraryInspectorController instance] + 96
    16 Ozone 0x0114946c -[OZScreenLayoutManager loadInitialLayout] + 92
    17 Ozone 0x0114964c -[OZScreenLayoutManager loadInitialDocLayout:] + 60
    18 Ozone 0x0114e304 -[OZDocWindowController windowDidLoad] + 852
    19 com.apple.AppKit 0x937f2ca4 -[NSWindowController _windowDidLoad] + 332
    20 com.apple.AppKit 0x937ef678 -[NSWindowController window] + 128
    21 Ozone 0x01083260 -[OZObjCDocument showWindows] + 192
    22 com.apple.AppKit 0x9383bed4 -[NSDocumentController(NSDeprecated) openUntitledDocumentOfType:display:] + 132
    23 Ozone 0x013a9228 -[OZDocumentController openUntitledDocumentOfType:display:] + 232
    24 com.apple.AppKit 0x9379fff0 -[NSApplication sendAction:to:from:] + 108
    25 com.apple.prokit 0x962c5bdc NSProCenterRect + 32000
    26 com.apple.AppKit 0x9379ff24 -[NSControl sendAction:to:] + 96
    27 com.apple.AppKit 0x9379fe04 -[NSCell _sendActionFrom:] + 156
    28 com.apple.AppKit 0x937b9e1c -[NSCell trackMouse:inRect:ofView:untilMouseUp:] + 1020
    29 com.apple.AppKit 0x937b9a04 -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 564
    30 com.apple.prokit 0x962f6850 NSProApplicationLoad + 197300
    31 com.apple.AppKit 0x937b9428 -[NSControl mouseDown:] + 536
    32 com.apple.AppKit 0x9375ac30 -[NSWindow sendEvent:] + 4616
    33 com.apple.prokit 0x962e3858 NSProApplicationLoad + 119484
    34 com.apple.AppKit 0x93703c74 -[NSApplication sendEvent:] + 4172
    35 com.apple.motion 0x00010a58 0x1000 + 64088
    36 com.apple.AppKit 0x936fb0b0 -[NSApplication run] + 508
    37 com.apple.prokit 0x962c6514 NSProApplicationMain + 288
    38 com.apple.motion 0x0000ec24 0x1000 + 56356
    39 com.apple.motion 0x0000d7e8 0x1000 + 51176
    40 dyld 0x8fe01048 dyldstart + 60
    Dual 2.3 PPC G5   Mac OS X (10.4.6)  

  • Software keeps quitting for no reason

    Hi
    I wonder if anyone has any ideas about this, Adobe Illustrator (CS2 v) keeps quitting when I attempt to use certain tools. Occasionally Adbe Bridge just quits also.
    Is this a software issue or a Mac issue? It never seems to happen when I use photoshop. Should I just blank everything and install the software again?
    Many thanks
    Jim

    Hi Jim,
    before you delete everything and re-install the software, try to run repair permission; open application folder > utilities folder > disk utility > repair permission.
    And restart after that.
    Good Luck.

  • I have multiple application folders for some reason

    Hi,
         I have recently upgraded to lion, and i noticed i had duplicate applications.  When i looked on my search bar under the title 'applications' six different application folders were seen is this normal?

    I have the same problem - I've had it several times since I bought an iMac (27" solid state hard drive) in summer last year.I'm running Snow Leopard 10.6.8. At one point I had Application folders nested to four levels!
    These are NOT aliases - I only discovered the problem when my hard drive was running out of space!
    I have certainly not done anything to cause this to happen (I am a very experienced Mac user).
    Deleting the nested folders has had no ill effects (although I did have problems with emptying the Trash for a while).
    Not really a problem, except in that it might be symptomatic of something seriously wrong with the system.

  • Applications close for no reason...

    About 4 weeks ago I installed Leopard on my computer and ever since then programs randomly close all the time. Ichat, safari, iphoto, microsoft word, and my printer controls, basically all of the programs have randomly closed for some unknown reason. Does anyone else have this problem after installing leopard and how can it be fixed?

    Start with http://www.thexlab.com/faqs/multipleappsquit.html

  • Software quits for no reason

    Hi
    Sorry i have posted this already, but i didn't get much response and I'm a bit desparate. If anyone can offer any ideas I'd be v.grateful!
    Adobe Illustrator (CS2 v) keeps quitting when I attempt to use certain tools. Occasionally Adbe Bridge just quits also.
    Is this a software issue or a Mac issue? It never seems to happen when I use photoshop. Should I just blank everything and install the software again?
    Apple mentioned something about a 'bad configuration file' but were unable to offer me a solution to fixing this.
    Many thanks!
    Jim
    Message was edited by: jimfrostis

    I would un-install / re-install the CS2 suite. Trying to track down the problem may take longer than restoring the software.
    I use the CS2 apps daily and have not had any problems of the type you mention.
    -Douggo

  • Audiobooks suddenly quitting for no reason

    This has happened on my daughter-in-law's 30Gb iPod video, my 2nd Gen 30 GB iPod, and my 2 GB iPod Nano.
    While playing an audio book, the book suddenly stops and the screen displays the menu, when I try to go back to the audiobook, instead of picking up where I left off, it starts over from the beginning. This is HIGHLY frustrating if I'm halfway through an 8, 9, or 10 our long book!!
    Anyone else ever experience this problem?

    Grey Randall,
    Is it the same audio book on all 3, or different audio books?
    Does the audio book play through in iTunes?
    Thank you,
    Nathan C.

  • Appleworks Quitting for no reason

    running Appleworks 6 on OS 10.4.11
    I have a database document that keeps crashing upon an attempted save or navigation through the cells.
    Anyone else have these issues?
    thx

    (1)
    repair permissions with Disk Utility or better
    run a maintenance tool like the free Onyx to clean several hidden system files.
    (2) trash the preferences files:
    <startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.appleworks.pli st
    <startupVolume>:Users:<yourAccount>:Library:Preferences:AppleWorks:AppleWorks 6 Assistants Cache
    <startupVolume>:Users:<yourAccount>:Library:Preferences:AppleWorks:AppleWorks 6 Preferences
    <startupVolume>:Users:<yourAccount>:Library:Preferences:AppleWorks:AppleWorks 6 Translators Cache
    (3) check the installed fonts. One of them may be corrupted.
    (4) try to work from an other user account which will allow you to know if the problem is linked to items of your account or if it is linked to items of the global components.
    Yvan KOENIG (VALLAURIS, France) jeudi 10 septembre 2009 12:32:19

  • External drive turns off and on for no reason

    Hello,
    While I work on my computer I have been hearing lately my Lacie drive shut off and start up again and shut off... like it is trying to stay on... and if I select it on the desktop, the beach ball appears and will continue to twirl until I shut my computer and startup again. I was also having problems with QuarkXPress (desktop publisher program) quiting for no reason and thought that it was the external hardrive causing this problem. So, I have been starting the computer in the AM without plugging in the Lacie to see if Quark doesn't quit, but it does quit for no reason. I have also trashed the preferences for it with no luck. I am starting to think that maybe it is my computer itself having problems. I had the permissions repaired, used TechTool Pro to repair any problems. All had been fixed by these two approaches and I am still having the Lacie trying to quit and restart... and still having Quark quit...
    Please help. Today I performed a PRAM to see if that will work. I'm not sure what it is for, but in the past it has helped other problems.
    Any idea as to what is going on?
    martazoila

    martazoila:
    Welcome to Apple Discussions.
    Take a look at these FAQs by Dr. Smoke and see if any of his recommendations help:
    Resolving Disk, Permission, and Cache Corruption
    Multiple applications quit unexpectedly or fail to launch
    The Spinning Beachball of Death
    Please post back and let me know if anything worked for you, or with further questions or comments.
    Good luck.
    cornelius

Maybe you are looking for

  • Using remote control distorts aero for windows 7

    everytime I remote to a machine using the remote control feature in zcm in alters the desktop display of the computer, sometimes changing the fonts, wallpaper, etc.. Will remote control be compatible with aero?

  • TS1702 problems with iphone 5

    hello can anyone help.... I have a number of issues this is my first iphone! -It's charging when the phone wants to some times it will charge then other times I get a message saying that its not supported. -Apps close by them selfs when i'm on them.

  • Mac OS slow performance after bootcamp installation

    So, I've been searching around here and on other forums, but I haven't found a solution yet to this problem and wanted to see if others knew of it. The problem is that the performance on Mac OS seems to have degraded when I have bootcamp (with WIndow

  • Can Timers be stopped and started?

    Can Timer() objects be stopped and then restarted? Timer AttitudeIndicatorTimer = new Timer(); AttitudeIndicator AttitudeIndicatorControl = new AttitudeIndicator(); AttitudeIndicatorTimer.schedule(AttitudeIndicatorTask, 0, 500); I would like to be ab

  • Dual Processor G5 - only 1 processor recognised.

    When I was running a Logic session, I saw a sudden drop in performance, and noticed that the system performance meter in Logic that should show a bar for each processor was now only showing a single bar. I quit Logic and checked in the system profile