Applications re-installed on phone mem - E71

Since I have found out that installing third party applications on the mem card causes many problems, I am gradually installing the same applications that I have on the phone memory whenever I find updates to those applications without first uninstalling the old ones on the mem card.
The new application installer finds the old one and asks whether I would like to reinstall it all the same. I say yes and it installs.
I would like to know what happens to the old apps on the mem card. Are there remainders that need to be cleaned up. Or do these application mobve entirely to the phone mem and nothing needs to be done. There are no problems with the functioning of the apps.
mgoksoy

How about checking resource folder of your memory card using some x,y,z, browser. IMO and based on my experience with S60 I think it is highly unlickly that it will remove them from memory card.
I have never faced any problem with two of my s60 phones when I installed the app on memory card. I installed apps on phone memory when they recommned it. Otherwise I prefer having phone memory free.
Thanks
Aditya

Similar Messages

  • Detecting if native iPhone application is installed on phone from a web app

    Hi...
    How can I detect if one particular iPhone native application is installed or not on th device from my web application...
    So if installed then user can launch it or the link will take him to th store to download it...

    Unfortunately, the only alternatives are to put all resources required by JAAS in jre/jre/lib/ext OR on the system classpath when the JVM is started.
    This is apparently due to a bug in JAAS. The implementers of JAAS have the LoginContext written so that it loads resources only from the system classpath. Unless this was, for some reason intentional. I don't know what the plans are for JAAS going forward with respect to this.
    Has it been fixed in J2SE 1.4?
    I'll have you know this wreaks havoc with attempting to have your LoginModule use an EJBs to authenticate a user and add Principals to the Subject.

  • That application could not be lanched for debugging. ensure that the target device screen is unblock and that the application in installed

    what is the problems?

    Hi windows phone app can not debugging,
    >>that application could not be lanched for debugging. ensure that the target device screen is unblock and that the application in installed.
    Based on the error information, it seems that you are trying to deploy the application on the Windows Phone Device. Then what Windows Phone OS are you using? Can you run
    the application by using the Windows Phone Emulator?
    For deploying the application on the Windows Phone Device, first please try to make sure you have registered your phone for Windows Phone development. For more information, please refer to:
    https://msdn.microsoft.com/en-us/library/windows/apps/ff769508(v=vs.105).aspx . 
    After that please try to make sure that phone screen is unlocked and the project you want to run is set as the default Startup project.
    Besides, please try to refer to the following article about how to deploy and run apps on a Windows Phone device:
    https://msdn.microsoft.com/library/windows/apps/ff402565(v=vs.105).aspx#BKMK_device .
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Application not installed because it is not signed

    None of my music or videos would show up on my iPhone 4, so I am trying to restore it but now no applications will install back on the phone. It gives the error "Application not installed because it is not signed" for 69 out of the 72 apps I am trying to re-install after a restore from iTunes. Any suggestions please.

    I acquired my Verizon iPhone less than two weeks ago and had the same problems reported here - many, many "...Application not installed because it is not signed" errors. On following the Apple Troubleshooting advice, iTunes deleted everything I had downloaded on the iPhone.
    After reading this thread, I turned off my network card and then turned off Zone Alarm. This time, everything sync'd on the first try.
    Yes, it ***** to have to do that, but you don't have to REMOVE your ZoneAlarm; just disable it temporarily to get the sync done. It is a pain, yes, to not be able to use the computer to connect to the Internet for that 15 minutes or so, but if you do it right you won't be at risk and you'll be able to back up your phone/load music and etc.
    Until ZoneAlarm fixes itself, this is our best option.

  • How to access INTRANET mobile applications from a cell phone

    Hi,
    I have installed 9iAS rel 2 on two HPUX boxes (2 tiers installation) and I have followed the quickstart section of the 9iAS wireless - Get Started and System Guide, to test the wireless functionality. Most of the functions are working fine except the SMS and we are still working on the (out of the box) SMS function and try to fix it. Anyway, the next step is to access the out-of-the-box functionality in reality. The 9iAS installation is sitting in our intranet and would like to know what steps we need to do in order to access our intranet wireless application? I know we need a dial up line to access our intranet and a WAP gateway. Our unix admin is in the process of installing the WAP gateway. Once he finish setting up the gateway, what is the next step to access the intranet wireless application using the cell phone?
    Your comments are highly appreciated.
    Thanks,
    Derek

    The way I did it was install the WAPLite gateway and then set up my mobile phone to use PPP access to get behind my firewall. I had to set the IP of my WAP gateway in the mobile phone settings too.
    Hope that helps.
    Tom

  • Can i execute a j2me application in a BREW phone

    Hai friends,
    Can i execute a j2me application in a BREW phone , if it is how? or should i need to go for any special certifications or convertions to make executable in BREW.B'caz i was not able to find the BREW emulator for j2ME?
    Thanks in Advance,

    Hi
    Yes you can run J2ME applications from a BREW device. But before doing that, you need to install the BREW extention to support J2ME. Which is nothing but the JVM.
    This can either be done over the air or manually.
    Check out this page: http://brew.qualcomm.com/brew/en/about/java/white_paper_03.html for more details.
    esmertec is one of the companies that has developed this BREW extention for J2ME. You can check esmertec.com for more details.
    Regards
    vilyams
    http://www.m-indya.com

  • Can anyone suggest an app to download for SMS messaging for iphone 3G as the message application factory installed is pretty useless and doesnt keep your sent messages in a sent folder

    Can anyone suggest an app to download for SMS messaging for iphone 3G as the message application factory installed is pretty useless and doesnt keep your sent messages in a sent folde and has no folders unlike most messaging features on other phones.
    Many thanks
    Mark

    Why do you need a Sent folder?  iOS's Messaging interface lays each conversation out like a chat or IM.  Personally, I find that much more convenient.

  • I can't install "windows phone power tool" in window 8 for windows phone 8 app development.

    Dear Sir/Mam,
    I can't install "windows phone power tool" in window 8 for windows phone 8 app development.
    I am download the Windows phone power tool  for install in windows 8 for wp8 app development then it show the dialogbox for install that software. if i am click on install button it shows a another dialogbox that 
    i am using this link for install wp power tool.
    "https://wptools.codeplex.com/releases/view/97029"
    System Update Required,
    Unable to install or run the application. The application requires that assembly
    Microsoft.SmartDevice.Connectivity Version 12.0.0.0 be installed in the Global Assembly Cache(GAC) first .
    More information on this system update can be found by visiting the site here()
    How can i solve this problem. Please help me for install wp8 power tool.
    Thanks & Regards,
    SrinivaaS.

    Hi SrinivaaS Birlangi,
    >>Microsoft.SmartDevice.Connectivity Version 12.0.0.0 be installed in the Global Assembly Cache(GAC) first
    When we meet the above exception, first please try to make sure that we have installed the WP8.0 SDK very well.
    Then please try to check the following article which may give you some idea:
    https://wptools.codeplex.com/workitem/41 .
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Official N-Gage always installed on Phone Memory

    Hi,
    I downloaded N-Gage from www.n-gage.com for N96, the downloaded file is named as n-gage_v1.20_1459.sisx,
    then, transfer this file to Mass Memory via PC Suit and install it,
    But, this application always install N-Gage to Phone Memory(C), and no option for chooseing install to Mass Memory(E).
    Why????????
    P.S.: I have used 3 keys way formatted my N96, after formatting, N-Gage application is gone, so I downloaded one from n-gage.com and found above issue.
    Please help.
    Thanks

    hi, for some reason before, i downloaded n gage to my 2g memory card. now i try to download games, it wont. But now i think i found the solution. when i took out my memory card and put it back in, n gage is gone. so i figure i downloaded n gage in my mmc. so i try to download n gage in my fone but it needs 10.3 mb and i only have 10 left. it may sound dumb becuase i should just delete some other stuff but is there anyway i can download n gage in my fone through using my mmc ? if not how can i download it to my fone using phone memory ?

  • HT5624 when ever i log any application on my 4s phone i get notification ie connect to iTunes to use push notification

    when ever i log any application on my 4s phone i get notification ie connect to iTunes to use push notification

    Hello there, ajinkyab.
    The following Knowledge Base article provides some great. practical steps for troubleshooting the issue you're describing:
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/TS3305
    To use certain services, iTunes must download and install an authentication token on the device. Because iPad and iPod touch do not require an active Internet connection to activate, these tokens may not be downloaded and installed during initial setup.
    You can resolve this issue by verifying that iTunes has an active Internet connection. Use the following steps:
    Open iTunes on your Mac or PC.
    Verify that your Mac or PC has an active Internet connection by accessing the iTunes Store in iTunes.
    Connect your iPad or iPod touch to your Mac or PC.
    After the sync completes, verify you can access YouTube.
    This article also provides a great resource for troubleshooting apps installed on your iOS device:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/TS1702
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I want to have application Siri in my phone. Help me. Thanks you

    Hello. I want to have an application Siri in my phone please. Help me please ! Thanks you so much

    There is no Siri application, and Siri is not supported with an iPhone 4. You need a 4S or later.

  • I installed Itunes on my Vista, but error reads that there was no Apple Application Support installed and Itunes needs this in order to run

    I need to back up my iphone 5s on my old PC running Windows Vista SP2. After installing the proper iTunes that would run on Vista, I get an error as follows;
    "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes and install iTunes again. Error 2 (Windows error 2)"
    I will appreciate any help. Thanks

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I got this iphone from a guy and everytime i tried to update the applications stored in this phone it keeps asking me the password that the guy used to use, even thou i created a new apple ID of my own and updated the account of icloud and everything in t

    I got this iphone from a guy and everytime i tried to update the applications stored in this phone it keeps asking me the password that the guy used to use, even thou i created a new apple ID of my own and updated the account of icloud and everything in this iphone with the new apple ID, it still asks me the password of the account that the guy used to use whenever i tried to update the applications, and i cant find the guy who gave me this iphone...wt should i do???

    Apps are permanently tied to the AppleID that downloaded them and cannot be transferred to another.  Best thing to do is delete the apps and download those you want or need under your AppleID.

  • How to install windows phone 8.1 in other mobile phones(Android mobile phones or other)?

    Can i install windows phone 8.1 in other mobile phones(Android mobile phones or other)?

    Csound1 wrote:
    Either you will do this correctly or you will not.
    You can not have a storage partition in addition to Mac OS and Boot Camp.
    I can't help at all if you want to go your own way.
    Good luck, backup before you lose data.
    Ok, thanks
    I want to check this tutorial http://www.intowindows.com/how-to-install-windows-8-1-on-mac-without-boot-camp/ It´s about install Windows 8 without bootcamp.
    I tell us

  • I backed up a firefox profile and then deleted all data. I need to restore this profile to my new install after phone restore. How can I do this please?

    Long story short - had to reformat my laptop and lost all my bookmarks and preferences. Could not get Sync to restore from the phone's bookmarks. Backed up phone's firefox profile (Android ICS) to an external SD card. Formatted both phone and computer. New CLEAN firefox install on phone but I havent figured out how to restore the profile backup from external SD back to the phone's Firefox before moving to Sync with desktop. Feeling very dumb and hoping for some help....thanks!

    Thanks for responding but the link seems to be relevant to Windows. Is there a similar method for Android phones?

Maybe you are looking for

  • Possible have the an inner class named the same as an outer class?

    Is there some workaround for this issue? I have some code generated by JAXB that won't compile because of a situation like this. public class Class1 {     public Class1() { }     public static class Quantity {         public Quantity() { }         pu

  • Launch iCal at boot-up or login

    I would like iCal to launch immediately on login or boot-up. I seem to remember that this was possible in earlier OS versions. Is it possible with Leopard? I am running Leopard on a Mac Mini.

  • WinDVD 10 SD suddenly shuts down after inserting a dvd!

    Hi there, During the last days I configured the w530 of my gilrfriend (OS is Windows 7). After installing the newest updates (Both, from Lenovo and Microsoft) everything seems to be fine, except that WinDVD doesn't work anymore! When I insert a DVD t

  • Language still wrong in iTunes

    Again I installed iTunes 5.0.1 English on Windows XP, and again it's showing menus in Finnish. Can't Apple please fix this? I have no intention of changing my regional settings (Finnish) which must be correct for other programs to work appropriately.

  • Replacing Intel iMac Superdrive

    Hi All, So, my iMac's "Superdrive" isn't all that super. Over the past couple of months, it started acting up. It began with some scraping noises when I put a DVD into it. A few weeks later, it started to randomly spit out discs. I would put one in,