Applications Start Page profile option cannot be set at responsibility leve

Note 729375.1 describes the use of the 'Applications Start Page ' profile option. It mentions an enhancement request to make this profile option updatable at responsibility level but we cannot find this enhancement request

Log a SR and ask Oracle Support about it (and its status) as this Enhancement Request is not mentioned in the same doc.
Thanks,
Hussein

Similar Messages

Applications Start Page Profile Option Causing Issues

Hello Oracle Gurus,
I'm having an issue in a 12.1.3 instance that I think may be related to the "Applications Start Page" profile option.
For testing purposes, we set the profile to a specific Self-Service page at the Site level. We eventually removed the Site level profile and added it at the user level just for specific users, but since the Site-level profile was set, every time we click the Home link in the upper right-hand navigation, we get an "unexpected error." If we attempt to log in as a user that does not have the Applications Start Page profile defined, we also get an unexpected error.
After getting the error using either of the methods listed above, if we then try to navigate back to the login page, the instance throws a 500 Internal Error.
If we close the browser and navigate to the instance again, we're able to log in without any issues with user accounts that have an Applications Start Page profile defined.
Our "Self Service Personal Framework Mode" is set to "Framework Only" at the site level.
Bouncing Apache seems to resolve the issue temporarily, but then it comes back again a few hours later...
We've opened a Service Request, but has anyone else run into this before / have any ideas on how to fix it?
Here are some related Metalink notes from 11.5.10:
729375.1 (About the Applications Start Page profile option)
331814.1 (Error on Personal Home Page when returning to 'Home' link)
Thanks!
Anne

The issue is not specific to a responsibility or application.
Here is the error:
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for Linux: Version 11.1.0.7.0 - Production
     Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.1.0.7.0 - Production
     Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
     TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 27-JAN-2011 09:46:02
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=172.30.31.107)(PORT=1502))
Thu Jan 27 09:53:30 2011
Incremental checkpoint up to RBA [0x42.e3635.0], current log tail at RBA [0x42.e37e1.0]
Thu Jan 27 10:13:31 2011
Incremental checkpoint up to RBA [0x42.e602b.0], current log tail at RBA [0x42.e6146.0]
Thu Jan 27 10:33:33 2011
Incremental checkpoint up to RBA [0x42.e7bc9.0], current log tail at RBA [0x42.e7d51.0]
Thu Jan 27 10:53:35 2011
Incremental checkpoint up to RBA [0x42.e995f.0], current log tail at RBA [0x42.e9ac9.0]
Thu Jan 27 11:13:37 2011
Incremental checkpoint up to RBA [0x42.ec163.0], current log tail at RBA [0x42.ec3f7.0]
Thu Jan 27 11:23:48 2011
Starting background process CJQ0
Thu Jan 27 11:23:48 2011
CJQ0 started with pid=8, OS id=17239
Thu Jan 27 11:33:39 2011
Incremental checkpoint up to RBA [0x42.ee08f.0], current log tail at RBA [0x42.ee216.0]
Thu Jan 27 11:53:41 2011
Incremental checkpoint up to RBA [0x42.efd07.0], current log tail at RBA [0x42.eff13.0]
Thu Jan 27 11:54:02 2011
Stopping background process CJQ0
Thu Jan 27 12:13:43 2011
Incremental checkpoint up to RBA [0x42.f25c0.0], current log tail at RBA [0x42.f2e4b.0]
Thu Jan 27 12:33:45 2011
Incremental checkpoint up to RBA [0x42.f4cae.0], current log tail at RBA [0x42.f4e4b.0]
Thu Jan 27 12:53:47 2011
Incremental checkpoint up to RBA [0x42.f6e8a.0], current log tail at RBA [0x42.f6fb7.0]
Thu Jan 27 13:13:50 2011
Incremental checkpoint up to RBA [0x42.fa3d0.0], current log tail at RBA [0x42.fa845.0]
Thu Jan 27 13:33:52 2011
Incremental checkpoint up to RBA [0x42.fc7d9.0], current log tail at RBA [0x42.fc989.0]
Thu Jan 27 13:53:55 2011
Incremental checkpoint up to RBA [0x42.fed4e.0], current log tail at RBA [0x42.ff12e.0]

Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKA

You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

Business Role, Technical Profile, Application, Start Page in UI for service

Hi CRM 2007 gurus,
I have made all the settings in accordance with C04 to use the UI for the services role (copy of business role SERVICEPRO). Created the relevant PFCG role and a position in the org model; with a user and the business role assigned to the position. But I am getting an empty page on login.
Then I changed the technical profile from DEFAULT to DEFAULT_IC; then it started giving an error "Permission denied".
I then changed the start application to CRM_UI_FRAME and the start page to DEFAULT.HTM; then Internet Explorer started exiting on its own after the login.
Can someone pls tell me what is amiss. Do I need to include some specific application and page as the "Startup Application" and "Start Page" in the technical profile (these are currently blank for the technical profile DEFAULT attached to the concerned business role).
Points to be won; kindly help asap.
Regards,
DP

Hi Deepak,
few cents that might help:
- Your problem is definitely not related to authorization issues. (easily derived by the nature of the error message and the point where it occurs (CL_BSP_WD_STREAM_LOADER))
- The error message you received is being raised when CRM UI runtime tries to load a runtime repository. In case a runtime repository of a component has dynamic parts (e.g. the shell part itself), the repository is being loaded by the system via HTTP or HTTPS, depending on system settings. This results in the system sending a HTTP(S) request to itself.
Now, there are two likely reasons for this going wrong:
a) the system cannot "see" itself on the network (hosts problem, reverse proxy sceanrios, etc.)
b) the runtime repository doesn't exist at all (ressource doesn't exist). This sometimes happens if component enhancements are active in a client (customizing settings) but the respective enhancement component (development objects) haven't made it into the system.
c) In your case we can rule out this one: the SICF service for the UI component is not active - in that case the response would likely have been something like "Access forbidden" and you confirmed already all SICF services being active
To get more clarity, you might want to proceed as follows:
- Set a breakpoint in the line mentioned in the error message. You can access the source code of the releavant method using SE38 even though the include name looks pretty scary in the message (CL_BSP_WD_STREAM_LOADER=======CM02 or so).
- In the debugger, check the name of the URL that had been tried to access (The variable should be available some lines above the breakpoint where the request gets sent).
- try to access the same URL directly from your browser.
Now, if you still don't get a valid response, b) might be the case. If you get an XML file back, a) might be the case.
Good luck!
Peter

Profile option to be set to view About this page link

Hi All,
I am working in OAF 5.7h.Kan anyone tell me da name of the profile option that needs to be set for being able to view the About this page link in the footer of all pages.
thanks in advance

Probably the page you are looking at is a JSP page and not a OAF page which explains why you are not getting the link. Could you please provide the URL you see when you are on the page.
--Shiv

Since one of the Firefox updates this past week my homepage defaults to the Firefox Start Page when I reboot. Setting homepage in Options is retained thoughout session but appears to disappear on restart. Anyone else have this problem?

Starting Firefox after system startup brings up the Firefox Start Page. When I go to Options under the General tab the Homepage box is blank. I can add it again and everything is fine until next system restart. I am using Firefox 3.6.12

See:
* http://kb.mozillazine.org/Preferences_not_saved
* [[Preferences are not saved]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols

Firefox start page has been replaced with foxstart, how do I get my firefox start page back, I cannot get rid of foxstart

This appeared after a re-install due to a virus. On installing Firefox 6 it immediately went to foxstart as a home page, I cannot get rid of this or get back to the firefox start page, I have uninstalled Firefox and re installed but still get the same problem. The web indicates that this is now a problem for many of your users so it looks as if a fix needs to be generated to provent this happening. Hope you can resolve this problem. Many thanks. dave

Hey Revert back changes (if you don't like) via settings on right top side . Also send a related image so we gave you exact info about the settings. You can Shut automatic updates (but it may leads some issues) via
'''option'''-> '''advance''' ->'''update''' now choose any one of the following :
* Automatically Install Updats
* Let me choose
* never check for

When I start firefox my options (settings) get set back to the defaults and I am re-directed to the firefox start page instead of my home page. version 3.6.8

This problem started after upgrading to 3.6.8. It first looked as if Firefox is looking to update some plug-ins, despite setting it not to look for updates. I have the same plug-ins for a long time (MS drm, ad-block +, Java and script .
I wonder if locking the prefs would help, or make it read only.
Thank you for any help - I am a firebox addict.

Possibly a locked or corrupt preferences file. For details on this see the [[preferences are not saved]] article.

Application and start page for service professional (copy of SERVICEPRO)

Hi,
Can u pls advice me as to what should be the values for the following parameters for the business role SERVICEPRO:
1. Role Configuration key
2. Technical profile
for the selected technical profile:
- Startup application
- Start Page
I would want this profile to allow all the service related transactions. Kindly advice an approach.
Regards,
DP.

No response hence closing thread!

Setting 'MO: Security Profile or MO: Operating Unit profile option' - Urgen

All,
Version: 12.0.4
Module: Purchasing
I'm trying to invoke the PO_CHANGE_API1_S.record_acceptance to send the Advance shipment Notice doc to Oracle R12. On invocation I'm getting the following error
ORA-20001: APP-FND-02902: Multi-Org profile option is required+
set either MO: Security Profile or MO: Operating Unit profile option+
1. How do I set this profile option?
2. Is it required to set both security and OU profile option?
3. At what level(site,appln,resp,user,ou,...) should I set the profile?
Please help me.
Thanks,
Sen

Hi,
You can set those profile options from System Administrator responsibility > Profile > System.
Please see these docs for details.
Note: 602141.1 - R12 - Error ORA-20001, APP-FND-02902 Accessing Profile Classes Form With Multi-Org Access Control (MOAC) Enabled
Note: 338332.1 - App-Fnd:02902: Multi-Org Profile Option Is Required. Ora-20001
Note: 393560.1 - How To Prevent the Profile Option MO: Operating Unit being set to NULL at Site Level?
Regards,
Hussein

System Profile Option: Applications Global Idle Time

Hi to All,
I have been searching for more information about System Profile Option: "Applications Global Idle Time" in ML and Web but havent come across any documentation on this.
Does anyone have incite on this profile and the default parameter.
Thanks

Srini Chavali wrote:
Pl check the ROW WHO information in FND_PROFILE_OPTIONS table for this profile - most likely this is a custom profile created at your site.
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_PROFILE_OPTIONS&c_owner=APPLSYS&c_type=TABLE
HTH
SriniThis profile option exists in 11i and R12, it is a seeded one and not a custom one as you mentioned above.
It is even mentioned in (R12.0.6+ : Oracle Application Object Library Profile Options Data Collection Test [ID 471675.1]).
Thanks,
Hussen

How do I get back the functionality for the alphabetical drop down from my previous searches in the center Google search box of the Mozilla Firefox Start Page?

In the afternoon of August 24 I lost a feature on my Mozilla Firefox Start Page and I cannot figure out how to get it back. It concerns the Google Search area in the MIDDLE of the page. Previously, when I would want to do a search, for example Amazon, I would type the letter 'A' and, because I had typed 'Amazon' in that Search box before, an alphabetical drop-down menu would come up with 'Amazon' in it. I could then click on that word without having to type the rest of it. That option is no longer working.
I had done an Adobe Reader update that Friday morning, so I thought that might be why this happened,. I did a System Restore and took the system back to Tuesday, August 21. That did not help.
I ran CCleaner and cleaned the Registry also. Interestingly enough, I found that right after I do that and then open a Mozilla Firefox Start Page, the alphabetical drop down function is back in the center Search bar for one time, one search. After that it is gone again. I go in and do just CCleaner (no Registry cleaning required) and the same thing happens...the functionality is there for one search only.
I went in and made sure all my Add-ons/Plug-ins are up to date. I also ran a full system scan but no issues came up.
I am computer illiterate, so please bear with me. I have no idea if any of the things I tried would have helped or not.
I have Windows 7 and Firefox 15.0.1
I appreciate any help you can provide.

See also:
*Tools > Options > Privacy > History: "Remember search and form history"
*https://support.mozilla.org/kb/Form+autocomplete
The "Use custom settings for history" setting allows to see the current history and cookie settings, but selecting that setting doesn't make any changes to history and cookie settings.<br />
Firefox shows the "Use custom settings for history" setting as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".<br />

Query Profile Option - Strange Query Result

Hello,
I'm having a strange situation working with the profile option.
I have the responsibility MY_RESP associated to the profile option "MY_PROFILE" that is set to the value "Company Business Group Europe".
Now If I check using the OA which is profile option value associated to the profile option MY_PROFILE I get the right value "Company Business Group Europe".
If I run a query to check the same thing insted to get the value "Company Business Group Europe" I get a strange number.
Now I'm having this problem with several profile option values and that's not good 'cause I absolutly need to copy some hundreds of responsibilties with profile options, from an environment to another one and if I cannot get this values using the query it seems enough crazy to get them one by one using the application.
Do you have an idea about how to resolve this problem?
The query I was running to see the profile option values set for each profile option of each responsibilty was the following:
SELECT distinct
d.responsibility_name user_or_responsibility_name,
g.user_profile_option_name,
b.profile_option_value,
a.start_date_active,
a.end_date_active,
a.profile_option_name
FROM
applsys.fnd_profile_option_values b,
applsys.fnd_profile_options a,
applsys.fnd_responsibility_tl d,
FND_PROFILE_OPTIONS_VL g
WHERE
b.profile_option_id = a.profile_option_id
and g.profile_option_id = a.profile_option_id
and b.level_id = 10003
and b.level_value = d.responsibility_id
and d.responsibility_name like '%_ES'
ORDER BY
d.responsibility_name;
morover if I run the query
select PROFILE_OPTION_VALUE
from fnd_profile_option_values
where PROFILE_OPTION_VALUE = 'Company Business Group Europe'
the result is empty...
Thank you for the tips.
BR
DV

can any one please help me that i have a requirement based on the profile option name get all the available values which are present for each level i tried the so many queries but for each profile option name it getting the id not the value please provide me a query for this issueThere are many docs available, and if you search the forum you could simply find it -- profile option pointing to old sid
Thanks,
Hussein

MO Operating Unit Profile Option Needed for Mass Allocation in R12

Mass Allocation does not work in R12 unless you set MO Operating Unit profile option at GL Responsibility level. Is that an official requirement from Oracle or is that a bug? A client should be able to implement and use GL without setting operating units as they are needed for subledgers.

Hi
I have found the below mentioned information on MO: operating Unit Profile option from the Oracle E-Business Suite Multiple Organizations & Oracle General Ledger Reference Guide which directly or indirectly requires the setting of the profile option at the appropriate level (responsibility, site etc)
Profile Options not Owned by General Ledger:
The following profile option affects the operation of General Ledger, but is not "owned" by General Ledger:
• MO: Operating Unit - This profile option controls which operating unit a particular responsibility is assigned to.
Note: General Ledger's Account Inquiry window ignores the setting of this profile option. This allows you to drill down to your subledgers independent from their multiple organization setup. As a result, when you drill down to subledger details, General Ledger will show you all of the transactions that comprise an account balance, regardless of which organization originated the transaction.
To use multiple organizations, you must define an accounting setup with at least one legal entity, a primary ledger that will record the accounting for the legal entity, and an operating unit that is assigned to the primary ledger and a default legal context (legal entity).
You must set either the MO: Operating Unit or MO: Security Profile profile option for each application responsibility to use Multiple Organizations context sensitive applications. When you connect to the Oracle Applications, you sign on by entering your user name and password. Then, you choose a responsibility that is available to your user. After you choose your responsibility, there is an initialization routine that reads the values for all profile options assigned to that responsibility. Oracle Applications allows you to see only the information for those operating units that are assigned to your responsibility.
Hope this helps.
Thanks and Regards
Manish Jain

Probleme whith "MO: Operating Unit profile option" please help.

i have this message when i call this API:
HZ_CUST_ACCOUNT_V2PUB.CREATE_CUST_ACCOUNT,
the message is :
1. Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
2. Column account_number must have a value.
please can some one help me !
thinks a lot.

Hi
I have found the below mentioned information on MO: operating Unit Profile option from the Oracle E-Business Suite Multiple Organizations & Oracle General Ledger Reference Guide which directly or indirectly requires the setting of the profile option at the appropriate level (responsibility, site etc)
Profile Options not Owned by General Ledger:
The following profile option affects the operation of General Ledger, but is not "owned" by General Ledger:
• MO: Operating Unit - This profile option controls which operating unit a particular responsibility is assigned to.
Note: General Ledger's Account Inquiry window ignores the setting of this profile option. This allows you to drill down to your subledgers independent from their multiple organization setup. As a result, when you drill down to subledger details, General Ledger will show you all of the transactions that comprise an account balance, regardless of which organization originated the transaction.
To use multiple organizations, you must define an accounting setup with at least one legal entity, a primary ledger that will record the accounting for the legal entity, and an operating unit that is assigned to the primary ledger and a default legal context (legal entity).
You must set either the MO: Operating Unit or MO: Security Profile profile option for each application responsibility to use Multiple Organizations context sensitive applications. When you connect to the Oracle Applications, you sign on by entering your user name and password. Then, you choose a responsibility that is available to your user. After you choose your responsibility, there is an initialization routine that reads the values for all profile options assigned to that responsibility. Oracle Applications allows you to see only the information for those operating units that are assigned to your responsibility.
Hope this helps.
Thanks and Regards
Manish Jain

Applications Start Page profile option cannot be set at responsibility leve

Similar Messages

Maybe you are looking for