Applications tab does not work in iTunes 9

I have upgraded to iTunes 9 and 3.1 firmware on my 3GS. When I connect the phone to the computer and access it in iTunes, I cannot use the applications tab.
I see all my applications in the list on the left, but some are unchecked. I can see all my screens load up on the right side of the screen, but I cannot do anything with them. Everything on this page seems "greyed-out", especially the right-hand side. Nothing on this page responds to the mouse except for the "Sync Applications" checkbox and the sync button on the bottom right hand of the screen.
All other tabs are functioning normally...
Any help would be appreciated.

Sounds like your problem is either entirely different, or the cure starts out differently, or at least I didn't explain myself well--sorry. My Restrictions for iTunes and Installing Apps were originally set to "OFF," so those two icons could not be used on my iPhone; I assume that was why my "Applications" tab in iTunes was grayed-out. It sounds backwards, but I had to set my iPhone's Restrictions to "ON" so that those to icons were enabled.
Whatever your iPhone's restrictions are set to, try changing them to the opposite and run thru the entire process Angelo gave me, and maybe a second time again so that you end up with those two Restrictions set to ON. Good Luck!

Similar Messages

  • Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

    Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy.  What should I do?
    I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM.  But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install.  It is like an infinite loop!
    Please, someone help!
    Thanks!

    HI gener7!
    I'm sorry but I am not on Creative Cloud.  I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application.  My AAM version is:  8.0.0160
    The link you provided was the update that I wanted to install but it does not work.  A window shows up during that install that says:
    We've encountered the following issues.
    Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem.
    and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
    Thanks!

  • When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

    When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

    The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • Why does right clinking on link and selecting open in new tab does not work?

    Why does right clinking on link and selecting open in new tab does not work?
    It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Front page opens works shortly freezes. only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally. The restart saved tabs does not work on that first page.

    front page opens works shortly freezes.
    only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally.
    The restart saved tabs does not work on that first page.

    Hi @prdstudio3 ,
    Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • Application Parameter does not work on migrating

    We have encountered this various times.
    When we add an application parameter to an existing application, it does not work on migrating.
    We have to make a new service (application) and then attach the parameter to it, then it works.
    What is the reason for this behavior?
    Eg: I added the parameter WDDISABLEUSERPERSONALIZATION and set it to X in development. Works fine there. On migrating to UAT, it does not work. What's amiss?
    Thanks in adv.

    Hi Aishi,
    maybe SAP Note [1332644|https://service.sap.com/sap/support/notes/1332644] "WDA Application Parameters are not changed in all clients" might be helpful in your case.
    Best regards,
      Andreas

  • The print tab does not work in mapquest

    The print tab does not work in mapquest

    You are on the right track to getting the printer installed regarding firewall but perhaps it has saved in a different port on your computer than can communicate correctly.  Search Devices and Printers on the Windows 8 PC so you can pull up the printers' folder. Do you see the Officejet 6500 in here (meaning have you installed it again)?  If you do not see it here, check your Print Server Properties and make sure the driver is not in here either, if so remove it.  Restart the Print Spooler. Make sure you uninstall it completely and shut down the PC (see video link on how to uninstall HP drivers and restart the print spooler in Windows 8 if needed).
    Remember to re-install the Full Feature Software and Drivers (for your OS and region) when the PC reboots.  Try the test print and if it does not print:
    1. Right-click on it and select Printer Properties.  
    2. Under the Ports tab make sure you see the printer's IP address here or a serial number.  Sometimes the HP network -rediscovery ports can be tricky.  
    3. When the printer is high-lighted in this window, click Add Port.  
    4. Select Standard TCP/IP and follow the rest of the prompts in the Wizard to enter in the printer's current IP address.
    5. Try to print.
    If this does not help you, you may have other computer problems.  
    Have you ever installed a printer on this PC before?  
    What is the name of the anti-virus software you use?
    Are you on a server, proxy, or other elaborate wireless setup?  
    Answer those questions for me please if the above information does not help you. I will do my best to assist. 
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • My iphone 5 has 7GB, went to apple store the guy said my backup that I was restoring from was corrupted so I have to restore it as a new phone wondering that if I do this and it does not work, will iTunes have my old backup saved?

    My iphone 5 has 7GB, went to apple store the guy said my backup that I was restoring from was corrupted so I have to restore it as a new phone wondering that if I do this and it does not work, will iTunes have my old backup saved?

    Yes, if you have been backing up on a regular basis.
    If this is your first time backing up, then no.
    you can check edit - preference - backup - see what is listed

  • New tab does not work

    "Open a new tab" does not work, nor does File/New Tab

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    Your system details show that toolbar in the user agent as AskTbWCL2/3.12.2.16749
    See:
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • New Applications model DOES NOT work with StandAlone OSD media

    If you are able to create StandAlone OSD media, the new Applications model DOES NOT work with it.
    - The creation of the media will be successful
    - The application installation itself will be successful
    Yet after the application is installed, it shows the correct process it needs to complete based on the return code in AppEnforce log, but does not process that information back to the the TS Manager so it appears to attempt to download a policy which fails
    causing the task sequence to error out..
    Thanks,
    Squirre1

    It is very similar to this description:
    http://madluka.wordpress.com/2012/05/15/error-0x8000405-when-installing-applications-to-a-workgroup-system-during-build-and-capture-task-sequence/
    It is using the application model, since it is not attached to the domain it is on a workgroup. But it is on standalone media and not during a build and capture sequence, it is during an OSD. But alot of the same puzzle pieces fit. Basically pointing to
    the new applications model not working during standalone OSD when the MP is not available. i would say that not enough information is getting encapsulated into the Application when exported onto the StandAlone media.

  • Video does not Work in iTunes Store please help! annoying problem!

    The video does not work in the itunes store. I get no picture, only sound when i want to preview a music video or a movie trailer. No video at all. However, i can watch my movies and music videos that i already own. Please, is there any smart guy who knows a solution?

    I'm having this same issue. I tried some things but still couldn't get it to work the way it used too.
    It will not play the video portion in iTunes only the audio if I click on the song. If I switch the settings from Music Video to TV show in the info tab, the file plays fine. If I open it in Quicktime, the file plays fine.
    I've tried changing the preferences so that the video will play in the iTunes window, in a separate window, etc. and all it plays is the audio and will show the artwork instead of playing the video.

  • Application Role does not work

    In EM, I add a new application role to an ADF web application.
    This application role named simple11_AR_superAdmin and it has a group member named simple11_G_superAdmin.
    This group is created in weblogic console and assign users.
    However, this setting does not work. This application can be login by all users (including weblogic).
    How to enable application roles? Does application role of EM equal to application role created in Jdeveloper?

    DO NOT UPDATE ON THE PHONE ITSELF! Never do this! You risk bricking your iPhone and seeing the Silver Apple Logo of Death due to incomplete downloads and/or crashing! This has happened to me on my old iPhone as well as thousands of others. Use iTunes and iTunes only to update Apps!

  • Info tab does not show in iTunes 11.1.2 in iPad sync window

    I have OS 10.9 on my iMac, iOS 7.0.3 on my iPad, and I'm using iTunes 11.1.2 . I had only one problem syncing my iPad with the iTunes--the info tab does not show in the sync window. Has the method of syncing calendars changed? How can I do this

    I found the following in another discussion thread:
    If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com. (http://support.apple.com/kb/PH12117)
    Since I do not use cloud computing for security reasons, I will not be syncing my contacts or calendars between devices. I hope the Apple developers rethink this strategy. Meanwhile I'll figure out a work-around as I have in the past when software has an unfortunate glitch.

  • The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

    Hi everyone.
    I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf ,  (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
    I follow the instructions of that document carefully:
    I go to: PeopleTools -> Web Profile -> Web Profile Configuration
        2. Then I choose the Web Profile: "Development".
        3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to  the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
        4. Stop the Web Domain and Clear cache.
        5. Start the Web Domain again.
    After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
    I tried many combinations with the ctx parameters URL but it does not work yet. 
    I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
    According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter,  Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
    Thanks for you help and feedback.

    2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
    The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
    Also, you can use multiple ctx parameters:
    E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
    This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

  • The BUY button does not work in iTunes

    iTunes will not allow me to buy music. The BUY button does not work. I can drag a song to my Purchased folder and then the BUY button comes up in my Library! And then I can buy the song. However I want to purchase whole albums, not single songs.

    It really makes it tough to troubleshoot when there is no error message. So what I'm saying is - I am sort of at a loss. Anyway, try this - close all apps on your iPad, reboot the iPad and then try again.
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for