Applications take a lonnnnng time to open after startup

I'm not sure if this is a problem or just the way the Mac works. Either way I'd love an explanation if someone knows.
After I start up or restart my Mac, it boots just fine, not too slow or anything. Once it looks like I should be ready to open up applications and get going (i.e. external HD is booted, dock is all good to go), though, it seems to take a VERY long time for them to open. If I open up Firefox, it takes at least a minute to open and load my home page, whereas once this initial slow period is over, it takes only seconds.
I didn't notice this as much with my PPC iMac but it's very obvious with the Intel one. As I said, after the initial slow period is over, everything works fine. Is this working the way it's supposed to? Thanks.

Does this happen to you with all applications?
Yes. It happens with any application I open during the "slow minutes" after I boot up. Entourage, despite working under Rosetta, normally opens almost as quickly as, for example, iTunes. But even iTunes takes forever during this period.
Also, how much RAM does your iMac have?
2GB.
In my MacBook, applications open almost instantly.
Again, this is just in the couple of minutes after startup. Ordinarily my applications open almost instantly as well. I'm just trying to figure out what's slowing my computer down so badly just after it boots up. Thanks for your reply!

Similar Messages

Messages take a long time to open after EHP1 upgrade

hi,
We have recently upgraded our PI 7.0 to EHP1 and we find that it takes unusually long time in sxmb_moni to open up(view) messages, has anyone seen this before .
Thank you
Jonu Joy

I'd suggest tracing system activity when this long runtime issue occurs, so you could know where this time is spent (db access ? etc) ... a plain SM50 call in parallel could do the trick if runtime is long enough !
Chris

Videos take a long time to open after the last quicktime update

Hey guys
Since I've downloaded the latest quicktime update videos are taking a very long time to open. They used to open instantly and now they take about 40 seconds (negligable difference if quicktime is already open or not).
This is with a Powermac G4 1.25Ghz with 2GB RAM running 10.4.10 and all latest updates.
Any suggestions on how to fix this?

I'd suggest tracing system activity when this long runtime issue occurs, so you could know where this time is spent (db access ? etc) ... a plain SM50 call in parallel could do the trick if runtime is long enough !
Chris

Applications take 1-2 minutes to open at startup.

Hello,
I've had a problem for a while with my iMac taking 1-2 minutes to open applications after startup.
I then cleared up a lot of hard drive space & installed Leopard--and that seemed to do the trick.
But the problem has come back. Any application takes at least one minute to open properly after the computer is started up (Mail, Safari, iTunes etc)
I am running Leopard 10.5.8 with 2GHz INtel Core Duo & 2 GB 667 MHz Memory.
With 45 GBs of free hard drive space.
Any help would be much appreciated!
Thanks,
Marc

Read the user manual that came with your computer. There is a chapter with recommendations on when to shut off and sleep your model computer.
Onyx is a maintenance utility - http://www.macupdate.com/info.php/id/11582/onyx

.excel file takes lot of time to open after running Custom Program

DB:11.2.0.2.0
Oracle Apps:12.1.3
O/S:AIX 6.1
Hi All,
Issue Description:
When the report is submitted, the data gets populated into the table in less than 30secs and xml gets generated within a minute.
But the program takes some time in displaying the output around 5 mins but when we tried with html, it opens up quickly.
The template has a complex matrix, layout wherein, we are using nested FOR loops to display the data in the required format.
Yesterday, we ran the report “Custom GL STAT Trial Balance Report” in DEV Instance and for around 500+ records, it took around 5 mins.
The excel file is only 1 MB and xml generated is 245 KB
Moreover, recently we had increased the OPP jvm to 3GB to avoid java.lang.memory error what was occurring earlier.
select DEVELOPER_PARAMETERS
from FND_CP_SERVICES
where SERVICE_ID = (select MANAGER_TYPE from FND_CONCURRENT_QUEUES where
CONCURRENT_QUEUE_NAME = 'FNDCPOPP');
2 3 4
DEVELOPER_PARAMETERS
J:oracle.apps.fnd.cp.gsf.GSMServiceController:-mx3072m
Could this issue be due to JVM increase issue or something else?
How, could we monitor the jvm while the report is running to troubleshoot the issue?
Thanks for your time and help on this if anyone is willing to share such an experience faced before?
Regards,

DB:11.2.0.2.0
Oracle Apps:12.1.3
O/S:AIX 6.1
Hi All,
Issue Description:
When the report is submitted, the data gets populated into the table in less than 30secs and xml gets generated within a minute.
But the program takes some time in displaying the output around 5 mins but when we tried with html, it opens up quickly.
The template has a complex matrix, layout wherein, we are using nested FOR loops to display the data in the required format.
Yesterday, we ran the report “Custom GL STAT Trial Balance Report” in DEV Instance and for around 500+ records, it took around 5 mins.
The excel file is only 1 MB and xml generated is 245 KB
Moreover, recently we had increased the OPP jvm to 3GB to avoid java.lang.memory error what was occurring earlier.
select DEVELOPER_PARAMETERS
from FND_CP_SERVICES
where SERVICE_ID = (select MANAGER_TYPE from FND_CONCURRENT_QUEUES where
CONCURRENT_QUEUE_NAME = 'FNDCPOPP');
2 3 4
DEVELOPER_PARAMETERS
J:oracle.apps.fnd.cp.gsf.GSMServiceController:-mx3072m
Could this issue be due to JVM increase issue or something else?
How, could we monitor the jvm while the report is running to troubleshoot the issue?
Thanks for your time and help on this if anyone is willing to share such an experience faced before?
Regards,

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 250
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320,07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Stickies    Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    npsf_cef: Version: sf 3.3.1.1 [Click for support]
    Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
    DivX HiQ
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 999.86 GB
        Total number of backups: 60
        Oldest backup: 2012-07-15 01:16:54 +0000
        Last backup: 2015-03-29 19:28:06 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        97%    rapportd
         3%    WindowServer
         1%    mds
         0%    fseventsd
         0%    distnoted
Top Processes by Memory: ℹ️
    155 MB    Safari
    120 MB    Finder
    86 MB    rapportd
    86 MB    WindowServer
    69 MB    mds_stores
Virtual Memory Information: ℹ️
    12.56 GB    Free RAM
    2.53 GB    Active RAM
    428 MB    Inactive RAM
    1.66 GB    Wired RAM
    1.04 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 06:00:15 PM    Self test - passed
    Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
    Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
    Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
    Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
    Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
    Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
    Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
    Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Firefox takes very long time to open and often crashes for some websites

i have used firefox 3.6 with windows xp, vista and now windows 7. there is same problem i am facing at all after well usage of week. firefox takes very long time to open approx. 1 minute at first click. after refreshing computer when i click again, it becomes ready to use but meanwhile you re working firefox opens in another window perhaps for the first click. what is this please? i have reinstalled firefox but it is not fixing problem
== Troubleshooting information ==
how can firefox be ready for use at first click?

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

My mac takes a long time to open an internet page

My mac takes a long time to open on internet page and it's not the connection as all our other apple products in the house are working fine. Any suggestions?

Here are some troubleshooting steps.
Does this behavior persist if you: (1) Try it from a different user account, e.g., Guest? (2) Try it after starting up in Safe Mode ? (3) Try it after turning off all Safari Extensions? (4) Turn off all virus scanners, system cleaners, and third party optimizers? (5) Delete all malware, (6) Temporarily disable all internet plug-ins? (7) Make a burnt offering to Zeus?

Downloaded 4.0 and having problems.webpages take a long time to open & when opened, I get a "firefox is not responding" message.yahoo email is not loading.Is there a problem with firefox 4? is the problem going to be fixed?

firefox problems after installing version 4.0

Hi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time!

Lenovo Services/Program takes a long time to start after bootup

It seems like Lenovo services take a long time to start after boot up is completely done.
My Bootup time is less than a minute (0:51s), but my lenovo services (Power Manager Gauage, Lenovo Services in the Sidebar, have th ThinkVanatage Button work, and most annoying of all is having access to my network card to change networks) takes about 2 minutes.
Is there a reason why this is taking so long?
I've uninstalled and installed the lastest Lenovo Interface Driver, and a lot of ThinkVantage/Lenovo software and drivers.
Any ideas?

No response?
Anyone else on T400 notice this?

Itunes takes too much time to open and don´t recogneize my iphone

itunes takes too much time to open and don´t recogneize my iphone
I´ve alredy unistall and re install and didn´t work

5-10 minutes is normal for me when opening iTunes. But then my library is stored on network drive which slows everything down.
There has been many posts about problems with RAID and iTunes. Don't know if any of those relate.

ITunes takes a long time to open, or doesn't open at all.

I recently had problems with iTunes where it just wouldn't open. I did a factory reset on my computer, however it takes a long time to open and works really slow. When I try to sync, it takes around in hour.

.

It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

There are file hidden all around in your system.
Go to Phil Stokes' info page, for a gerat uninstall primer.

AP Trial Balance - File is massive and takes a long time to open up

Hello,
We are upgrading from 11.5.10 to 12.1.3 and are running into some serioud problems with the Accounts Payables Trial Balance report in Detail Mode.
1. The Report takes upwards of 10 minutes to open up - and in many cases does not.
2. On further research we see that the report output file is > 500MB whereas comparable 11i Trial Balance files are only 19MB.
3. We tried running in various formats Text, PDF, HTML with no luck.
4. In fact HTML and Text formats gave “Authentication failed” errors when we tried to open the report.
My questions are:
1. Why is there a such a large increase in file size? Is this expected going to R12?
2. Is there a way to speed up the opening of the large files or create smaller files? - (summary mode, and smaller date ranges are not options as per business needs). Even a 2 month date range give the same problems.
3. We noticed that the XLA_TRIAL_BALANCES table has 36,521,125 records...LARGE.
4. We compared the ap_liability_balance records between 11i and R12. We have 29,171,382 in 11i and 37,769,034 in R12. But this is expected as we purge regularly in 11i production and I don't think this difference (about 30%) in the size of the tables should cause such a large difference in the size of the report files (nearly 2000%!!!).
5. Why are we getting Authentication failed errors? Just for these reports?
Of course we opened an SR, but you know how SRs go :-) and this is a time critical project with our deadlines nearing.
Any help or pointers from the experts here is greatly appreciated.
Thanks
Edited by: user11992646 on Jan 27, 2012 2:12 AM

Hi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time!

BO Report in 4.0 takes lot of time to open

Hi We are having BO 4.0 environment.
The underline database is SAP BW and BO reports are built on top of Bex queries.
We found that it takes HELL a lot of time sometimes to open in BI launch pad/Infoview.
Just for opening it takes lot of time we cound found that actually it is not running anything in BW or else .
Could you tell us better integartion or alternate solution even for integartion of BI/BO or may be there would be some problem with interface betwwe BO and BW .
eg Tomcat server slow etc ..
Thanks
Gaurav.

Hi Denis,
Extremely Sorry for not providing enough information.
Business Objects is of BO 4.0 FP3 SP12.
BI is 7.10 Support Package 10 and Revision 627.
The point is While Opening Report In BO 4.0,it takes lot of time to open.
This generally happens whenever we have to open report for the first time in laptop/Desktop machine.
This always happens whenever we open the report for first time. (Generally when we have demo team metting to show our reports to management level and we face it takes lot of time )
Could you let us know for the same if someone else has also received this.
Please let me know if any other details is required.
Regards
Gaurav.

Applications take a lonnnnng time to open after startup

Similar Messages

Maybe you are looking for