Applications that are being downloaded are not visible in the home

Hello,help me,when I want to download an application, the application was not seen at home, but should be visible,when finished downloading the new look, does it bother me

Hi,
If properties not already defined there you can add -> in design console -> lookup definition -> search for "Lookup.FormField.Custom.Properties" and add required properties.
Thanks,
pallavi

Similar Messages

  • I just updated my iPod touch to IOS 5.0.1...but after that my iPod touch cannot synchronise with Itunes. the iTunes do detect the iPod and synchronize it but for examples a new song or aplication that i just download does not appear on my iPod...

    i just updated my iPod touch 4G to IOS 5.0.1. after that my ipod cannot synchronise with itunes. during connecting to itunes my ipod seem to be synchronised with itunes but the song or application that i just downloaded did not appear in my ipod.

    - First try a rset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next try restoring from backup

  • Could someone please advise on my current problem? Apparantly I can no longer download tones to my phone or account to be used as such since the tones are being downloaded as songs that cannot be transferred or placed in the tones area for the phone...

    Could someone please advise on my current problem? Apparantly I can no longer download tones to my phone or account to be used as such since the tones are being downloaded as songs that cannot be transferred or placed in the tones area for the phone or in iTunes. Prior to the last update, this was always an option. I have also noticed that the Ringtones and Alert Tones are not showing up in my recent purchases as well to allow for me to place them back on my phone and there for require for them to be purchased again... Any help would be greatly appreciated!

    I've discovered that all tones purchased will be downloaded as ringtones, BUT they can be utilized as tones and assigned as alert tones on the iPhone...

  • When copying songs to my itunes some of the songs don't show up in the library. I can see that they are being downloaded/copied to my itunes, but I cannot locate them in my library.

    When copying songs to my itunes some of the songs don't show up in the library. I can see that they are being downloaded/copied to my itunes, but I cannot locate them in my library?

    Do you have a Recently Added playlist?  Can you see them there?

  • TS1292 There are two numbers that are not visible in the middle of the code What can I do?

    There are two digits that are not visible in the middle of the itune code. How can I still access this card?

    Click here and request assistance, supplying as much of the code as you can.
    (74408)

  • HT4623 I recently upgraded my i-phone 4s phone with the new iOS7. Since that all the applications that I have opened will not close. How do I close applications that are running in the background?

    I recently upgraded my i-phone 4s phone with the new iOS7. Since that all the applications that I have opened will not close. How do I close applications that are running in the background?

    Double click your Menu button and swipe up the open Apps to close them.......

  • JNLP and jar files are being download from server again.

    I have a swing application deployed with Java Web Start on a server.
    On my client I install the application using JWS JRE 1.6.
    The issue is that without any change in the jars or JNLP the jars are being downloaded from the server again and again
    This is not consistant - it happens only sometimes.
    One important thing to mention: The server is inside a load-balancer cluster (AKAMAI), so the IP address of the actual server may change between different accesses.
    in the log, I can see the error:
    "Cache entry not found"
    and then the jar is being downloaded again.
    sometimes only one or two jars were downloaded again, sometimes the whole package with the JNLP file were dowloaded again.
    Can you suggest what can be the reason for this behavior?
    Thank you,
    Ran

    That does seem slow, but there are many factors that could be involved. More information would be helpful:
    - Are the source and destination filesystems ZFS or UFS? (or some other FS)
    - What does iostat show you?
    - What does vmstat show you?
    - What type of HBAs connect you to the SAN? ('fcinfo hba-port')
    - Anything in /var/adm/messages?

  • Images are not visible in the iPhone.

    When I open iTunes there are number of images found in the iPhone, but the images are not visible in the iPhone actually.

    I using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
    This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
    <?xml version="1.0" encoding="UTF-8"?>
    <deployment>
    <device>
    <repository>
    <mcd name="IrviaDemoApp" namespace="" version="1">
    <action type="install"/>
    <location type="local">
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
    <component name="hpcds.es~irvia_demo_app">
    <applications>
    <application deploy="true" name="IrviaDemoApp"/>
    </applications>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
    </component>
    </location>
    </mcd>
    </repository>
    </device>
    </deployment>
    There is a <source> entry for the mimes directory, where "Component images" are located.
    PD: Sorry about my poor english. I hope you to understand me.

  • MRS - Resources and demands are not visible in the Planning Board

    Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
    But when I am accessing Manageru2019s Planning Board -  /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
    "Resource 00000000010000000000000000000000 not yet created in the WFM Core"
    The details of the Error message
    "Resource 00000000010000000000000000000000 not yet created in the WFM Core
    Message no. /MRSS/SGE034
    Diagnosis
    Resource 00000000010000000000000000000000 has not yet been created in MRS.
    System Response
    No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
    Procedure
    Contact technical support.
    Procedure for System Administration
    Create the resource in question in MRS."
    I have run the Report
    /MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
    But even after that I am not getting the resources in the planning board.
    Also I am not able to view the Demands from PM/CS orders.
    I have created PM Orders and
    Assigned Work centres to the operations and
    assigned the Resources to the Operations.
    The HR assignment to the work center is also done.
    I have tried T Code   /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
    to pull the order demand. But it is not working
    Its giving following message
    1004280 is not a valid demand
    Message no. /MRSS/SGU139
    Diagnosis
    The order does not exist in MRS.
    This may be because:
    The order number has an invalid format.
    The order does not exist.
    The order is not relevant for planning and has therefore not been transferred to MRS.
    The order has been deleted from MRS.
    Pls help me on this.
    Thanks in advance and warm regards
    Purnendu

    Hi Anil/Saurabh - Thanks a lot for your replies.
    I have checked the MRS configuration as per your suggestion.
    It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
    But the Demands are not visible on the Planning Board.
    I have checked in the debugging mode what is causing the problem - It looks like
    "The Database Table: /mrss/d_dem_h  needs entry"
    But there are no entries in this table.
    I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
    I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
    How do I maintain entries in this table?
    How do I transfer Demand from ECC to MRS?
    Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
    We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
    To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
    So I am not sure whether it is executing the program properly.
    Pls help me resolve these issues.
    Thanks and warm regards
    Purnendu

  • Goods are not visible on the Web Shop main page (RUMP UP)

    Hi colleagues.
    Help please anybody :)
    There was the problem with the goods in Web Shop.
    Goods are not visible on the page Web Shop.
    Below you can see actions performed by us and Prerequisites:
    1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
    2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
    3. Manually created root node in Product Catalogs table in MDM
    4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
    5. Fill another necessary fields in Product Catalog module in WCEM.
    6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
    7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
    More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
    Best regardn,
    Andrey

    Hi Denis
    Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
    Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
    But on the WebChannel web shop page this products are not visible.
    I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
    According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
    But this role does not exist in the system (SAP MDM, SAP NW).
    Please give me advice about this.

  • Sales area data view is not visible

    Hi All,
    the salea area data view  is not visible for  all BP roles in BP master data
    please help me how can i need to put in a visible

    hi
    sales area data tab is not visible for each and every BP role,
    it is visible for sold to party,ship to party roles,
    there is aview associated with this role that is CRM 000
    if you want to have sales area data tab visible in the role like BP general you have to assign this view to your role
    but i should make you one thing very clear that sales area data tab is meant for the customer who has purchased the order and final order has been given and within this tab you have each and every info regarding the sales office,sales group etc that where the order is to be delieverd or purchased from,
    once a final order is given it can be sold to party role,ship to party role or bill payable role ,u urself tell in the role of customer how can u see the sales info if the customer hasnt purchased the order ,
    likewise the consumer role also has sales data info so sales area data tab is visible in this role too
    hope it clears all your doubt,
    in case of any doubt do revert back
    best regards
    ashish

  • I,m using macbook pro retina, I have changed the language to Arabic but still I find that password and downloading are coming in arabia

    I,m using macbook pro retina, I have changed the language from arabic to Endlish through system preference, but still I find that password and downloading are coming in arabia, when I start my computer it show password request in Arabic.

    http://support.apple.com/kb/ht4102

  • Can you view which apps are being downloaded to iphone

    Can you view which Apps are being downloaded to an iphone?  Like a history?

    Tap App Store > Updates (bottom icons on right)

  • When links are clicked, they do not fully display the NEW page until the mouse is moved.I know it is a current bug, and appears in no other browsers that I know of.

    It was pointed out that my links do not function correctly on Firefox on a Windows platform. When links are clicked, they do not fully display the NEW page until the mouse is moved! I have now observed it for myself on my fathers PC running Windows XP on Firefox.My PC is on Windows7
    It is the 5 version of Firefox, so I know it is a current bug, and appears in no other browsers that I know of.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4+ you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • TS1436 certain cds are being recognized but not burnt propley?

    Certain cds are being recognized but not burnt properly?

    So I guess theres no one whos encountered this? I can't possibly be the only one. I created the original post before registering.

Maybe you are looking for