Applications won't work after 2.0.1 update

None of the new applications will work on my iPhone after the new update. When I try to open an application, it begins to open and then quits to the icon screen. I have one of the old iPhones. I tried to turn it off and back on but that didn't solve the problem. I deleted boxoffice and tried to search for it in the app store and it wasn't listed. Same with phone saber. Anybody else having problems with the update?

I'm having the same issues, as well as others. look around on this site for some help, but far as i know it is a problem that apple is going to have to fix via an update.

Similar Messages

  • Apache won't work after 10.5.2 update

    Apache won't work, after I installed the 10.5.2 update.
    When I type the following in the terminal: sudo apachectl -t
    I get a error:
    /usr/sbin/apachectl: line 81: 711 Segmentation fault $HTTPD $ARGV
    Does anyone know how I can solve this?
    thank you!

    I too had the same problem after the auto update 10.5.2 - specifically the 2008-002 update broke my machine in a number of areas.
    I downloaded the package and ran it, this seems to have mopped up the problems caused my the first run.
    The update is located at:
    http://www.apple.com/downloads/macosx/apple/security_updates/
    Look for 2008-002 (Leopard) it's about 50MB.
    Hope this works for you too.

  • Applications won't work after archive and reinstall

    My wife has an iBook G3. After automatic update she got the red circle with a slash in it. She rebooted to the install disk and chose to archive and reinstall. After doing this and restarting, several applications will not work. For sure itunes, safari, iphoto and perhaps other she has not tried. The message she gets is: "The application cannot be launched because the system is incompatible." Suggestions? Thank you. Steve
    iBook G4   Mac OS X (10.4.7)  

    To A Brody, thanks for the link to the backup info page..that was very helpful.
    I'm having a panic with two volumes with 10.3.9 and 10.4.3 getting corrupted and impossible to repair or reinstall...and getting errors that "may be bad blocks...bad media.." and am backing up all the photos and music to a usb ext HD.
    I'm only able to start up with os9 and am careful...perhaps not enough, I don't know, to not do anything to the osx files I can see from the other parition with os 9.
    So far I've just dragged the files I want to the ext HD. I think I will do it again with a disc image as well, on the same ext HD, and burn dvd's later.So far, testing the backup with another mac in osx, I'm able to see the pictures with Preview, and import the music and play it...but yikes, no backup is like running with scissors. Two different friends are also backup less and they both use their macs for business! I hope to get them fixed up as well.
    I'm going to post a new question about the phrase: "Mac OS X can't be installed on an ATA/IDE drive that is configured as a "slave", although it can see and work with such drives.": from one of the best books on OS X. Is this true?
    G3 233hz desktop   Mac OS X (10.4.3)   567mb ram, xpostfacto

  • Safari won't work after version 5.0 update

    Hi there!
    I've just updated Safari yesterday, just to find out it simply won't work… The program "opens up" as usual, but fails to load any page… I get the blue background on the menu bar (as if it was trying to load something) but no "turning wheel" (wich indicates the loading progress). It just stops there. I'm writing from my MacBook, on which I haven't performed the update yet, but I really need to make it work again on my main computer. Can anyone help me out?
    Thanks in advance!

    Found the solution to my problem in another thread...
    http://discussions.apple.com/thread.jspa?messageID=11633377#11633377
    Essentially, I tracked down my CosmoPod installation and moved it to the desktop. My CosmoPod was in HD>Library>Input Managers, though others have found it in a folder called SIMBL in Application Support.

  • Apps won't work after sync and software update

    Just syncd my ipod 4.  Now FB, games and other apps won't work.  The screen just goes blank.  Re did the sync and still nothing.  I really don't want to restore the settings because I have a lot of info on this pod.  What can I do?

    Try restarting your iPod by holding down the on/off and home buttons at the same time until you see the Apple logo, if that don't work try double clicking your home button to open your multi-task window hold you finger on the first app until it start to wiggle and the red minus sign shows up in the left corner tap the red minus sign to close all of your open programs.

  • Applications won't work after an unsuccessful update.

    On Saturday, I tried updating my apps via wi-fi, but after an hour of staring at the screen without any success, I simply left my house with my iPod while it was still updating. I decided to update them later since I was in a rush... and now, the application icons are "frozen" in their updates. What should I do? Would I have to uninstall and reinstall the apps? ):
    Here is what it looks like:
    http://i42.tinypic.com/2lblyk6.png
    http://i42.tinypic.com/2iu6bth.png
    Help!

    Hi,
    Is there an iTunes download running or paused on the iPhone? If there is resume or cancel it.
    If not, try restoring the iPhone as shown here: http://support.apple.com/kb/HT1414
    -Jason

  • Applications won't open after error in a update using a Apple G4

    Apple G4 wont open applications, it says application switcher error or error type 3, everthing used to work until when updating the mac a error accured it restarted, now it won't open an application without saying error type 3, or when it boots a bomb sign with the following message saying application switcher error please restart. does anyone know what i can do or whats happened? i have a boot disk which isn't the offical apple cd as i cannot find it or find a place where i could get one from if anyone knows where i could get one from that would be most helpful!!
    Thanks.

    haydn,
    It sounds like you are talking about Application Switcher from system 6, twenty five years ago.  If you are using system 9 and you happened to have other systems on your hard drive, the computer could get confused with what to do becausse it sees older software that the processor can not handle.
    I looked at a map of England and did not recognize any cities that would have a Mac user group.  If you google and find a user group near you, the best thing to do would be to find a Boot CD, put it in, restart while holding down the C key and see if you can clean up your drive.
    Otherwise, ebay has boot CDs listed from time to time.  This may look tempting:
    http://cgi.ebay.co.uk/iBook-G3-Install-cds-x7-10-2-Jaguar-OS-9-2-2-OS-8-/2207859 53727?pt=UK_Computing_Apple_Mac_Accessories&hash=item3367de4bbf
    But, here is the catch.  The disks look like they are grey and not the universal install CDs.  If one of the CDs is not for your exact model of computer, be sure and look for a CD that is white with an orange 9 on it.
    Jim

  • HT4623 Reminders won't work after iOS 6.1 update on iPhone 5?

    I updated to the new iOS 6.1 update last night. Went to make a reminder through siri and i get to the point were it asks to confim. When I press confirm Siri tells me that she can't do it. I try to set a reminder manually and the app does not give me the option to add a reminder manually. Everything worked fine before the update when my iPhone 5 had the 6.0 iOS?
    Any ideas on what the problem coulb be? Any help would be appreciated.
    Thanks in advance.
    GS47

    The problem is more than likely being cause by corruption that occured during the iOS install or in the backup that was used to restore the phone after the update.
    Standard troubleshooting is:
    Re-boot the phone
    Restore the phone from your backup
    Restore the phone as a new device.
    One of the 3 should fix the problem.

  • Help: http mail plugin won't work after 10.4.3 update

    Posted this at the OSX mail discussions, but have not been getting response so I'm posting it here:
    After installing the 10.4.3 update from software updater, i have found that my osx mail app can no longer be access my hotmail and yahoo accounts. It was working fine with the httpmail plugin i downloaded from version tracker a few months ago--- but since the update it has ceased to work.
    Anybody know why? Is there a new version of the plugin that works with 10.4.3?
    Any help will be greatly appreciated...thanks.

    Since Mac OS X doesn't have a "clean install", please clarify from this user tip which installation option did you choose?
    http://discussions.apple.com/thread.jspa?messageID=607614

  • Video Chat in iChat won't work after 10.4.8 update

    I use video chat all the time in iChat but after the 10.4.8 update everytime I try and start a chat or get invited to one a window pops up and says "There was a communication error. Do you want to send a report to apple?". Has this happened to anyone else? Does anyone know how to fix this?
    Thanks

    Have you repaired permissions since updating? I'd start there.

  • External keypad won't work after installing OS 7.

    External keypad won't work after installing OS 7. I have a "Zagg" keyboard that won't pair now to OS 7,...Why?

    They do work. I have one and mine is working. Have you tried to reset your iPad? HOlding down teh sleep and home keys until it reboots then try pairing again.
    A slightly more drastic thing is to go into the settings and reset all settings. THe downside, you will need to retweak your device but it can help fix keyboard glitches.

  • Quicktime won't work after lion upgrade

    quicktime won't work after installing Lion

    I am having the same problem. Anyone else have this problem and find a solution??

  • Printer won't work after installing mountain lion?

    printer won't work after installing mountain lion?

    Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
    System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

  • Java applications won't work

    On my iMac, Java applications won't work.  I tried opening minecraft, and several other Java applications.  All of them have a message that pops up saying, "Not compatible version of Java 1.5+ is available."  I tried updating it but their is no update for Java it says on my updater.  Running 10.6.8

    Dakota97 wrote:
    I tried openning it but it said it couldn't open because it requires java to run it.
    I don't understand that becuase 10.6.8 should already have Java installed.  It optional in 10.7.x.  It will be interesting to see if the java update even works under these conditions.

  • Mission Control won't work after sleeping.  Upon Start up it's fine, but after sleeping it won't work by track pad or keyboard.

    Since updating, Mission Control won't work after sleeping.  Upon Start up it's fine, but after sleeping it won't work by trackpad or keyboard. I'm sure I use Mission Control more than most, so it's really irritating for me.

    No, the versions of iPhoto on the iPad and on OS X are totally different.
    What Apple ID are you using for the Mac App Store? Who else has access to that Apple ID, or what possible other Apple IDs could be in use? It's possible you'll need to purchase iPhoto to get the upgrade, though I'd think Software Update should offer you the correct version.

Maybe you are looking for