Applicatoopn root / dynamic dataProvider for itemEditor

How to reach the main application instance from a custom
datagrid itemEditor component? I need to use data in the
application for dataProvider of that ComboBox itemEditor.

I think you should always be able to do
Application.application.

Similar Messages

Problem in setting dataprovider for a dynamically generated datagrid

Hi everybody
I have a issue in flex, I am generating datagrids dynamically
by using repeaters but i am unable to set a seperate dataprovider
for each grid
Grid1 might come with some set of data and grid 2 with some
and so on so i want to set dataproviders at runtime for each grid
how can i do that
i have pasted my code for generating datagrid dynamically plz
go thru that and find me some solution
<mx:Repeater id="ProjectNames"
dataProvider="{GetTimeSheetDetails.lastResult.NewDataSet.Table1}"
>
<mx:Canvas label="{ProjectNames.currentItem.ProjectName}"
width="100%" height="251" id="CanvasTimeSheet"
creationComplete="disablecanvas();">
<mx:DataGrid x="10" y="10" width="864" height="206"
editable="true"
dataProvider="{GetTimeSheetDetails.lastResult.NewDataSet.Table}"
id="dgTimeSheet">
<mx:columns>
<mx:DataGridColumn headerText="Task" dataField="TaskName"
width="60" >
</mx:DataGridColumn>
<mx:DataGridColumn headerText="Task Description"
dataField="TaskDescription" width="150" editable="true"/>
<mx:DataGridColumn headerText="M" dataField="Monday"
width="15" editable="true"/>
<mx:DataGridColumn headerText="T" dataField="Tuesday"
width="15" editable="true"/>
<mx:DataGridColumn
</mx:columns>
</mx:DataGrid>
<mx:Label x="564" y="222" text="0" width="35"
textAlign="right" id="lblMonday" />
<mx:Label x="602" y="222" text="0" width="33"
textAlign="right" id="lblTuesday"/>
</mx:Canvas>
</mx:Repeater>
</mx:TabNavigator>

try this and say me if it works fine!!!
<html>
<head>
<script>
function fileds() {
     var myParent = document.getElementById('myDiv');
     var text = document.createElement('input');
     text.setAttribute('id', 'myText');
     myParent.appendChild(text);
     document.all.myText.focus();
</script>
</head>
<body>
<input type="button" onClick="javascript:fileds()" value="Create And Give Focus">
<br>
<div id="myDiv"></div>
</body>
</html>
bye

Dynamic URL for Recv HTTP (Adapter spec attribute enabled)

Hi,
I need to have a dynamic URL for one of my cases been worked. the URL is
httlp://:<host>/perform/XTA?serv=*&action=start
the event "action" can accept either start/stop or restart. i wanna to control this dynamically and went for recv http enabled with adapter specific message attributes. here i had enabled the check box "URL" and in parameter 1 i had given the name as "action".
in my message payload the "action" will be start/stop or restart which is handled by UDF for which the code is below:l
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey trig = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/HTTP", "UrlParamOne");
conf.put(trig,action);
return "";
this udf is mapped to the root node of the target...but when execute the case i get the following error
"Dynamic Header - Missing Message Attributes: URL/HTTP Destination"
when i execute the url
httlp://:<host>/perform/XTA?serv=*&action=start
in browser it works fine and also with fully qualified name in http recv works fine but not with dynamic settings.
any help on it pls?

Hi Prabhu,
Enable Adapter-Specific Message Attributes(ASMA) in receiver HTTP channel.
Dont enable checkboxes for "URL or HTTP Destination".
Enable checkbox "Apply URL Parameters"
for parameter1 textbox give value action
Regards,
Praveen Gujjeti

Dynamic Playlist for streaming video

This is my first attempt at building a dynamic playlist for
streaming flash video and I'm following the tutorial at
"macromedia.com/devnet/flash/articles/video_player.html". I've
changed the paths to my FMS and loaded the video files to the
applications directory of the FMS (flash_applications/videosource).
The thumbnails load and the player skin loads but the videos do not
load when I click on the thumbnails.
I've read the earlier post about this same issue. I followed
the advice from that post and reloaded the 'main.asc' file from my
Flash 8 program files but the video still does not play.
Here is a link to the site so you can see the problem:
http://media.us.elsevierhealth.com/videosource/VideoSource1.swf
My FMS is 'media.us.elsevierhealth.com'
I believe my code is correct and I believe the paths I've
created are correct. If someone could review my code and check the
path info I would appreciate it. Here is the code from
'VideoSource1.as'
import mx.video.*;
//Set up the list box, call function VideoThumb to create the
actual thumbnails
list.rowHeight = 70;
list.cellRenderer = "VideoThumb";
list.selectable = true;
//create new empty listener object
listListener = {};
nc = new NetConnection(); //create a connection
nc.connect("rtmp://media.us.elsevierhealth.com/videosource");
//connect to FCS (nav.attributes.url)
ns = new NetStream(nc); //create a stream
ns.connect(); //connect the stream
nc.connect("rtmp://media.us.elsevierhealth.com/videosource");
var stream_ns:NetStream = new NetStream(nc);
stream_ns.play("video2.flv");
// Create function to trace all the status info.
function traceStatus(info) {
Message.text+="Level: " + info.level + " Code: " +
info.code+"\n";
} // Assign this function to onStatus handlers when you
create objects.
//Function to handle what happens when an item in the list is
selected
listListener.change = function( evtobj ) {
var nav = list.dataProvider[list.selectedIndex];
var reset = true;
for ( var i = 0; i < nav.childNodes.length; i++ ) {
var stream = nav.childNodes
if ( stream.nodeName == "stream" ) {
attachMovie("FLVPlayback", "my_FLVPlybk", 10, {width:320,
height:240, x:90, y:100});
//center the FLVPlayback component when FLV is ready to play
var listenerObject
bject = new Object();
listenerObject.resize = function(eventObject
bject):Void {
//center video in playback area
newx = (460 - my_FLVPlybk.preferredWidth)/2;
newy = (470 - my_FLVPlybk.preferredHeight)/2;
my_FLVPlybk._x = newx;
my_FLVPlybk._y = newy;
my_FLVPlybk.addEventListener("resize", listenerObject);
listenerObject.ready = function(eventObject
bject):Void {
my_FLVPlybk.setSize(250, 350);
my_FLVPlybk.skin = "ClearExternalAll.swf";
my_FLVPlybk.clear();
my_FLVPlybk.contentPath =
"rtmp://media.us.elsevierhealth.com/videosource/stream/_definst_/"
+ stream.attributes.name+".flv";
my_FLVPlybk.autoSize = true;
trace(my_FLVPlybk.contentPath);
reset = false;
//Add an event listener on the list, when it triggers, run
the listListener function to repopulate the list
list.addEventListener("change", listListener);
//Function that loads the XML file, parses it, and builds the
list of available video clips
var xmllist = new XML(); //setup a variable to hold the XML
xmllist.ignoreWhite = true;
xmllist.load( "playlist-demo-1.xml" ); //load the XML file
//The following gets called when the XML has been loaded
xmllist.onLoad = function( status ) {
if ( !status )
trace( status );
var entries = this.childNodes[0];
var playlists = {};
var nav = [];
for ( var i = 0; i < entries.childNodes.length; i++ ) {
var entry = entries.childNodes;
if ( entry.nodeName == "listitem" )
//builds array of video clip names
playlists[entry.attributes.name] = entry;
else if ( entry.nodeName == "menu" ) {
//builds array of available videos
for ( var j = 0; j < entry.childNodes.length; j++ )
nav[j] = playlists[entry.childNodes[j].attributes.name];
} //end else if
} //end if
//sends the array of videos to the listbox UI
list.dataProvider = nav;
} //end xmllist.onload
Any advice or troubleshooting will be appreciated. Thanks in
advance.

I just used the server on Windows (as opposed to linux) and
it worked great. So the issue, at least for me and my issue (could
see the thumbnails, couldn't play the video) was windows vs. Linux.
I guess the linux version doesn't work with this exact script. Now
to put together something of my own to test to see if the linux
version works right.

DataProvider for each DataGridColumn

Hi, all
How can I give a dataProvider for each DataGridColumn?
Because I have an arrayCollection with arrays and each array will
be assigned to one dataGridColumn. But the problem is the value of
dataField are the same for all columns, so at the end I only got
the values from the last array for the whole dataGrid. By the way
the number of columns depends on the length of the arrayCollection
and it is dynamic.
How can I write a custom DataGridColumn for it?
Anybody got any ideas?
Thank you very much.

I'm pasting the code I used. That's the best I can do for
you.
First is the main application:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
private function mouseIn( event:MouseEvent ) : void
trace("In: target="+event.target+";
current="+event.currentTarget+"; related="+event.relatedObject);
if( event.relatedObject == box.parent ) {
b1.visible = true;
b2.visible = true;
private function mouseOut( event:MouseEvent ) : void
trace("out: target="+event.target+";
current="+event.currentTarget+"; related="+event.relatedObject);
if( event.relatedObject == box.parent ) {
b1.visible = false;
b2.visible = false;
[Bindable] private var dp:ArrayCollection = new
ArrayCollection(
[ [1,2,3,4], [10,20,30,40], [100,200,300,400] ]);
]]>
</mx:Script>
<mx:VBox id="box" x="43" y="45" width="300" height="185"
horizontalAlign="center"
mouseOver="mouseIn(event)"
mouseOut="mouseOut(event)"
backgroundColor="#804040" verticalAlign="middle">
<mx:Button width="127" height="97" />
<mx:Button label="Button 1" id="b1" visible="false"/>
<mx:Button label="Button 2" id="b2" visible="false"/>
</mx:VBox>
<mx:DateChooser
selectableRange="{{rangeStart : new Date(2000,0,1),rangeEnd
: new Date()}}"
id="dateChoose" showToday="false"/>
<mx:DataGrid x="163" y="292" height="179" width="326"
dataProvider="{dp}">
<mx:columns>
<mx:DataGridColumn headerText="Column 1" dataField="col1"
itemRenderer="components.forums.ArrayItemRenderer"/>
<mx:DataGridColumn headerText="Column 2" dataField="col2"
itemRenderer="components.forums.ArrayItemRenderer"/>
<mx:DataGridColumn headerText="Column 3" dataField="col3"
itemRenderer="components.forums.ArrayItemRenderer"/>
</mx:columns>
</mx:DataGrid>
</mx:Application>
This is the item renderer code:
package components.forums
import mx.controls.Text;
import mx.collections.ArrayCollection;
import mx.controls.DataGrid;
public class ArrayItemRenderer extends Text
public function ArrayItemRenderer()
super();
override protected function
updateDisplayList(unscaledWidth:Number, unscaledHeight:Number):void
super.updateDisplayList(unscaledWidth, unscaledHeight);
if( data )
var dp:ArrayCollection = (listData.owner as
DataGrid).dataProvider as ArrayCollection;
var colIndex:int = listData.columnIndex;
var rowIndex:int = listData.rowIndex;
var colArray:Array = dp.getItemAt(colIndex) as Array;
text = String(colArray[rowIndex-1]);
else text = "";
----------------------------

How to set up Dynamic Variants for job which is based on Pay Period

Hi,
We need to set up dynamic variant for payroll interface. This interface is based on Pay periods and that is why we need to use different variant for each month. Letus know how to set up dynamic variant which will take care of Pay Periods

Hi, Thnx for reply.
We are not changing the control records, current period will be some old period in system.
payroll is not processed in SAP,

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

ASA 5505 -Can I use outside dynamic IP for webserver DMZ?

SETUP
ASA 5505
ASA Version 9.1(2)
ASDM Version 7.1(3)
I have basic license, using only three vlans (outside, inside, DMZ).
QUESTION:
I want to find a way (if possible) to use the single DYNAMIC IP (dhcp'd from ISP) on the "outside" interface, as a means to setup a web-server on the DMZ? I just want to allow my WHS-2011 (server) to talk to microsoft's free DDNS service where my domain name is hosted (ports 80,443,4125).
So far, every setup option I have tried does not make it past the implicit deny acl's (on the outside interface) to the web-server (DMZ).
I understand that the VLAN1 (inside) had to be disabled. I understand that objects now replace some of the older NAT'd components.
CONFIG:
object network webserver-external-ip
host <X.X.X.X>
! I had set this to match my ISP DHCP address
object network webserver
host 172.16.0.2
nat (DMZ,outside) static webserver-external-ip service tcp www www
nat (DMZ,outside) static webserver-external-ip service tcp 443 443
nat (DMZ,outside) static webserver-external-ip service tcp 4125 4125
access-list outside_acl extended permit tcp any object webserver eq www
access-list outside_acl_https extended permit tcp any object webserver eq 443
access-list outside_acl_rww extended permit tcp any object webserver eq 4125
access-group outside_acl in interface outside
access-group outside_acl_https in interface outside
access-group outside_acl_rww in interface outside
! added the dns statements below because the cisco doc (below) says it's required or dmz traffic can't get out despite default rule allowing it to do so.
! (ctrl-F) ... "all traffic would be blocked from the dmz to hosts on the internet"
! http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080bf150c.shtml
object network dns-server
host 8.8.8.8
exit
access-list dmz_acl extended permit udp any object dns-server eq domain
access-list dmz_acl extended permit ip any any
access-group dmz_acl in interface DMZ
SUMMARY:
I just want to allow my WHS-2011 (server) to talk to microsoft's free DDNS service where my domain name is hosted (ports 80,443,4125).
I want to find a way (if possible) to use the single DYNAMIC IP (dhcp'd from ISP) on the "outside" interface, as a means to setup a web-server on the DMZ?
Other:
As an interim alternative, I have been able to setup & connect to the ASA using clientless vpn (web-ssl), and from there getting over to my WHS2011 server...-but the problem is, I have no way of knowing, or updating my DDNS once that IP changes since the ASA keeps blocking the return traffic to theh outside interface. My only assumption is that becasue I am using a single dynamic IP (outside interface) that it has nothing to re-direct the traffic to....???
Thank You for any help you can provide!!
k/r

Hi,
I cant really help with the DDNS portion but I would imagine you already have that sorted out.
The ASA configurations however seem a bit off to me.
Here is what you should configure
STATIC PAT TO HOST SERVICES
There are some changes that need to be done to both ACL and NAT configurations. First of the NAT configurations for each port require their own "object network" to be configured.
Also since you are using a DHCP address from the ISP to act as the NAT address then you can use the keyword/parameter "interface" in the actual "nat" command. This basically tells the ASA that it should use whatever IP address is currently on the "outside" interface of the ASA. So you wont have to configure any separate "object network" for the public IP address every time it changes.
Also, with regards to the ACL configurations. You should only configure one ACL per interface in the "in" direction. So all the rules you need to configure for traffic inbound from the Internet need to be in the same ACL that you then attach to the "outside" interface with the command "access-group"
object network WEBSERVER-TCP80
host 172.16.0.2
nat (DMZ,outside) static interface service tcp www www
object network WEBSERVER-TCP443
host 172.16.0.2
nat (DMZ,outside) static interface service tcp 443 443
object network WEBSERVER-TCP4125
host 172.16.0.2
nat (DMZ,outside) static interface service tcp 4125 4125
access-list outside_acl extended permit tcp any object WEBSERVER-TCP80 eq www
access-list outside_acl extended permit tcp any object WEBSERVER-TCP443 eq https
access-list outside_acl extended permit tcp any object WEBSERVER-TCP4125 eq 4125
access-group outside_acl in interface outside
DYNAMIC PAT FOR LANs and DMZs
The above NAT configurations only handles the NAT for situations where the remote hosts on the Internet contact your DMZ server.
If you want to configure Dynamic PAT for all your LAN and DMZ users which basically enable them to use the "outside" interface public IP address for Internet traffic, then you could configure this single "nat" configuration
nat (any,outside) after-auto source dynamic any interface
This would enable Dynamic PAT for all users behind the ASA
I am not sure if you will run into problems since you are using a single public IP address and trying to forward TCP/443. This port is both used for SSL VPN and ASDM management of the ASA.
If you want to change the default port of the ASDM management you can use this command
http server enable
If you want to change the default port of SSL VPN you can use these commands
webvpn
port
Naturally before doing either of the above changes, make sure that you are not relying to them for management purposes if something was to go wrong. If you have SSH management access to the ASA then it should naturally be ok.
I am not sure if all of the above are enough to get your setup working but it should be the basics. Naturally if there is still problems after the above suggestions it might be helpfull to see the current ASA configurations. For example NAT might not work if the ordering of NAT rules is wrong even though the actual configurations are otherwise valid.
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed
- Jouni

Can we create a dynamic action for Training and Event Management???

Hi All
i need to configure automatic email generation for an employee when he gets booked for a training program in the training and event management module. can we use a dynamic action for it? and how to configure it?? I also guess that i have to use the Feature MAILS for it. but i am not sure abt it and also not sure how to configure it. I will really appreciate if someone can provide me with a step to step configuration for the same. Its urgently sought.
Thanks and Regards

Notifications in T&E are done through Workflow.Dynamic Actions are only for PA Infotypes.
~Suresh

How to extend dynamic selection for Logical Database PNPCE

Hi All,
I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
Thanks
Ranjith

Hi All,
I need to extend dynamic selection for Logical Database PNPCE. Can someone able to help with steps?
Thanks
Ranjith

Dynamic Configuration for determining filename

Hi ,
I am using dynamic configuration for determining the filename sent by the sender
I am using the following code::
int i = 0;
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
if (ourSourceFileName.equals("data.txt"))
for (i = 0 ; i < 1 ; i++)
result.addValue(ourSourceFileName);
i have also 'checked' filename in set Adapter specific message propertiesas in sender communication channel.
But Still it is not working.
Please provide some help on it.
Thanks & Regards
Nilima

Hi,
Michal
In SXMB-MONIthe response part contains DYNAMIC CONFIGURATION node
and it displays::
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName"><b>try1.txt</b></SAP:Record>
</SAP:DynamicConfiguration>
please sir provide some help on it.
Thanks once again.

Dynamic Configuration for two file adapters communication channels

Hello Experts!!!!!!
     In one of the interface in my landscape, I am using two file adapters for creating two files with different names and at two different destination on F.T.P.
However the receiver service for both the communication channel are same.
In message mapping I am using multi mapping to create two files out a single message.
Now i have a requirement of changing file path and file name using dynamic configuration for both the comm channel.
When i doing dynamic coniguration for both the comm. channel. My interface is creating two files but with same name and on same destination which is set for second communication channel through dynamic configuration.
Here, I guess the second dynamic configuration is over writing the first dynamic configuration and hence creating two files with same name and at same destination.
Please suggest, if separate dynamic configuration for separate communication channel of same receiver service can be done?
Thanks & Regards,
Amol

Thanks for your prompt responses!!!!!
    Is there any way, By which in dynamic configuration I can find out the communication channel name and then change its parameter.
I mean if iam using say comm. channel A and B.
Then in dynamic configuration for A, I will first take communication channel A by calling it and then change its path/file name.
and then do samething for comm. channel B in its dynamic conf.
Regards,
Amol

Dynamic Header for a website. DOUBLE POINTS FOR ANSWER!!

I don't even know where to start with this one, let me try explain this:
I am looking for ideas on how to create some sort of dynamic header for an affiliate website, we have launched a new affiliate program for http://www.africancures.com/ the affiliate program is done through 1shoppingcart.com and each affiliate is given an ID like:
http://www.1shoppingcart.com/app/?af=812264
Once the affiliate signs up they choose their own website URL like: mikeshealth.com, then we point the affiliate URL mikeshealth.com to http://www.1shoppingcart.com/app/?af=812264 which in turn comes to our main website: http://www.africancures.com/ now here is where the problem comes in, how do I make the website display Mikes Health instead of African Cures .
I hope I was able to explain this well enough as it seems to be a bit confusing to me when I write it down. I really hope there is someone out there who has worked on something like this before or if there is someone who thinks they know how to do this.
Thank you
So here is something else I was thinking of, but I am not much of a programmer anymore:
Have a list of all the affiliate ids and their corresponding website names, eg:
Affiliate ID=812264 Website name= Mikes Health, then when someone comes to the site the jave works out which affiliate id sent them to the site, eg
Get(AffiliateID)from Refering.URL then Display.Header(AffiliateID) on main page, do you think you could help me now Sabre150?

I'm still trying to see what this has to do with Java. Each host name such as mikeshealth.com will need to be registered with name servers with the IP address of www.1shoppingcart.com. Your web server will then need to be configured to perform perform any mapping.
Again, what has this to do with Java?

Dynamic select for all entries?

Hi!
Is it possible to do a dynamic SELECT FOR ALL ENTRIES IN... command?
sg. like:
DATA:
    select_text TYPE string,
    from_text TYPE string,
    where_text TYPE string.
SELECT FOR ALL ENTRIES IN <gt_table1> (select_text)
into corresponding fields of table <gt_table2>
FROM (from_text)
WHERE (where_text).
Thanks and Best Regards,
Tamas

Hi,
you can use the Dynamic Selects for FOR ALL ENTRIES, but i think you may need to use the correct Internal table to match the tabel structure
Regards
Sudheer

Error editing task sequence: Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" From XML into WMI

I've started getting an intermittent error editing my Windows 7 OSD task sequence. Sometimes I can open the TS to edit, but when I try to apply changes I get the error. Other times I get the error when trying to open the TS. If I try again
right away, I still get the error, but if I wait a few minutes and try again sometimes it will open the TS.
The error reads:
ConfigMgr Error Object:instance of SMS_Extended Status{Description = "Failed to load dynamic properties for class \"SMS_TaskSequence_ApplyWindowsSettingsAction\" from XML into WMI";Error Code = 2147943746;File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\ssptspackage.cpp";Line = 3454;Operation = "ExecMethod";ParameterInfo = "SMS_TaskSequencePackage";ProviderName = "WinMgmt";StatusCode = 2147749889;}
Coinciding with this error, I show the following entries in the TaskSequenceProvider.log file:
[PID: 7608] Invoking method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Failed to protect memory buffer, hr=0x80070542
TaskSequenceProvider
Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load node Apply Windows Settings from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "PostInstall" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "Execute Task Sequence" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load XML for the task sequence into WMI 0x80070542 (2147943746)
TaskSequenceProvider
[PID: 7608] Done with method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Setting status complete: status code = 0x80070542; Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI
TaskSequenceProvider
I exported the task sequence and checked in "object.xml" for the "ApplyWindowsSettingsAction", to see if there was something odd in the xml, but I don't find anything that jumps out as being wrong. Here's the section of XML for
that step. I've removed identifying info, and replaced it with a generic term in bold.
<step type="SMS_TaskSequence_ApplyWindowsSettingsAction" name="Apply Windows Settings" description="" runIn="WinPE" successCodeList="0" runFromNet="false"><action>osdwinsettings.exe /config</action><defaultVarList><variable name="OSDLocalAdminPassword" property="AdminPassword"></variable><variable name="OSDComputerName" property="ComputerName">%_SMSTSMachineName%</variable><variable name="OSDProductKey" property="ProductKey"></variable><variable name="OSDRandomAdminPassword" property="RandomAdminPassword">false</variable><variable name="OSDRegisteredOrgName" property="RegisteredOrgName">COMPANY NAME</variable><variable name="OSDRegisteredUserName" property="RegisteredUserName">COMPANY NAME</variable><variable name="OSDServerLicenseConnectionLimit" property="ServerLicenseConnectionLimit">5</variable><variable name="OSDTimeZone" property="TimeZone">Central Standard Time</variable></defaultVarList></step><step type="SMS_TaskSequence_ApplyNetworkSettingsAction" name="Apply Network Settings" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>osdnetsettings.exe configure</action><defaultVarList><variable name="OSDDomainName" property="DomainName">DOMAIN.COM</variable><variable name="OSDJoinPassword" property="DomainPassword"></variable><variable name="OSDJoinAccount" property="DomainUsername">DOMAIN ACCOUNT</variable><variable name="OSDEnableTCPIPFiltering" property="EnableTCPIPFiltering" hidden="true">false</variable><variable name="OSDNetworkJoinType" property="NetworkJoinType">0</variable><variable name="OSDAdapterCount" property="NumAdapters" hidden="true">0</variable></defaultVarList></step>
Is there any other log I should check for a clue on this issue? What could be causing this error?

Thanks for sharing that! I tend to save contacting MS support until after I've exhausted other options. I'm always afraid that I'll spend the $500 to open a case and then it turns out to be something simple that I would have found if I had just
kept working on it myself a little longer.
It looks like that link is for an update released in February as KB3023562. I downloaded and installed it. I'll try opening/editing/saving the task sequence a few times today to see if the issue is resolved.
After I had already installed it, I thought to look up that update in configmgr. The update is listed as superseded by 2 other updates. The newest of those is KB3046049, which just installed last night with the other March patches, so it's possible
that I didn't need to install KB3023562 after all.

Applicatoopn root / dynamic dataProvider for itemEditor

Similar Messages

Maybe you are looking for