Apply default transitions not working when applied next to AE Compositions

I'm kinda pulling my hair out with this. My default transition is Dip to Black, duration of 2 seconds, and centered at cut. When I select a bunch of clips in the timeline with After Effects compositions mixed in and apply the default transition, the transition around the AE Compositions is ALWAYS changed to 1 second, centered at start/end. And I have to manually go in there and change it to 2 seconds, centered at cut.
Here's a video describing it:
http://www.youtube.com/watch?v=FDsyXhE7Ohk
Why does it do this, and how do I get it to stop?

Your AE comps don't have handles.  There's no extra video there for the transition.

Similar Messages

  • Exchange Impersonation not working when applied to group or OU

    I am trying to set up Exchange Impersonation so a specific account can impersonate a group of users. I have successfully set it up and tested to impersonate a single user but it will not work when I apply it to either a distribution group or OU, even though
    Exchange accepts my commands. The commands I'm using are;
    New-ManagementScope -Name ScopeName -RecipientRestrictionFilter { Displayname -eq "All Group Staff"} 
    New-ManagementRoleAssignment -ScopeName  AssignmentName -Role ApplicationImpersonation -User [email protected] -CustomRecipientWriteScope "ScopeName"
    When I try the above for a single user instead of group it works fine. I am using EWSEditor to test. The error I get on the group is;
    The account does not have permission to impersonate the requested user.
    Type: Microsoft.Exchange.WebServices.Data.ServiceResponseException
    Source: Microsoft.Exchange.WebServices
    ErrorCode: ErrorImpersonateUserDenied
    ErrorMessage: The account does not have permission to impersonate the requested user.
    Should I be using a different filter or parameter to get this working for a group of users? Please note I don't want to apply this to all users in the organization.

    Hi,
    Thanks for your response. It's great to hear the good news. What's more, if you have issue with Exchange impersonation, welcome to our Exchange Server Development forum, forum which is staffed by more experts specializing in this kind of problems. Your understanding
    will be appreciated.
    For your convenience:
    https://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrdevelopment
    Hope this can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

  • Setting of "opening web pages from last session"not works when open next time

    In Options, setting to "open windows & tab pages from last time" does not work. I have tries several time but nothing happens. have written to you earlier also , please help

    ''setting to "open windows & tab pages from last time" does not work.''
    That would be very surprising but a change was made to Firefox 4 to always have the choice of going to History ("Alt+S") and choose "Restore previous session".
    With Firefox 5 coming out in a few days (June 21-22) you might try again then, if the solution the developers built in does not work for you. Do you know about pinning tabs ('''app-tabs''') they persist across sessions as a convenience -- if I really want to keep something permanently then I would bookmark such things as a group. Because they can be closed easily.

  • Video filters not working when applied to sequence clips

    I have looked through the forums and haven't found the solution to my problem. I am having problems with video filters on clips in the timeline. I have footage that needs color correction. In the viewer I created a 3 way filter for one clip, saved it, and applied to all clips in the browser. They all open corrected in the viewer. (I did this because i was reviewing the clips with my client).
    When I put the clip in the timeline it does not indicate it needs a render, the filter does not appear on the clip, but when I double click and open the sequence clip in the viewer the color correction tab is there. I've removed attributes and tried again several times, both using the menu with the clip selected, and by doulbleclicking the clip into the viewer and apply the filter there. The tab is always there but the filter does not appear on the clip. It only appears when the process is done to clips from the browser inthe viewer. I've checked the RT for unlimted, I've done a render all video, I've checked settings under the render tab and filters is checked. I've gone into another project and have the same problem in a different project with different clips. I had a recent project where I used a blur effect and it worked fine. My video is DV and my sequence settings are DV NTSC.
    I've run out of my ideas and comments from ither threads. What is my next troubleshoot? Should I delete preferecnes? I haven't done that with FCP, can I do it myself or use Rescue? Could that create other problems for me? Any other ideas?
    I work in Afghanistan and have no resources here for any Mac support besides books and forums. 
    Thanks

    Hey Catrina
    Not sure what the issue is with your application of the 3-Way Color Corrector in the Browser. My guess, is that perhaps you only thought you applied the "saved" instance of the 3-way corrector but instead applied a default neutral instance of the corrector.  How did you save the correction you applied to the other instances?  A good method is, having applied and tweaked it as needed to a sample clip instance, you can drag a copy of it out of the clip's Filter tab and drop it directly into your Browser window.  To check, then double click that Browser instance of the corrector to open it in the Viewer window and see if has the corrections settings as expected and no the default ones. If so, go ahead and drag it to another clip instance in the Browser and then drag that clip to your sequence ... has the correction "stuck" bow? But while we figure it out, for now, why not just apply the saved correction directly to the clips in the sequence?  Regarding trashing your preferences ... download Preference Manager from Digital Rebellion.  Very straightforward to use.
    Cheers
    Andy

  • Mocha tracking not working when applied to AE clip

    Thank you in advance for reading this.
    I'm a complete newbie to AE and, frankly, video editing in general. I'm trying to replace faces in a video with png pictures. I'm really not trying to go for the professional look and my skills wouldn't allow it if I was .
    I rendered my clip as sequenced jpgs in AE then added splines in mocha and inserted my pngs there to see how it looks. I am very happy with the results in Mocha. However, the tracking doesn't line up when exporting the data to my Clip in AE. If needed, I can upload my project somewhere to further illustrate my situation.
    I'm really enjoying this experiment with video editing (even though frustration has more then set in) and would like to improve my skills in time. Please help with my first few baby steps towards that goal!
    Thanks Again!

    Check this Martin Brennand's list to identify and solve your issue.
    Report back if you need some more help (please, give detailed explanation of what you are doing and what exactly is going wrong).

  • Default profile not working when home directory on Windows server.

    Hi,
    Using 10.6.4.
    I have created a default profile (stored in /System/Library/User Template/English.lproj) and this works fine for new local users.
    If I bind to AD (Using UNC path from Active Directory to derive network home location) and login as an AD user for the first time the default profile is not applied.
    Has anyone experienced this problem?
    Thanks,
    Dom.

    I'm experiencing the same thing, and am wondering if you had any success?

  • Default Transition Not Always Working

    I use CMD+D quite a lot to save time dragging the Cross Dissolve to clips.   But, it sometimes just doesn't work.  I can sit hitting CMD+D as much as I want (with the CTI on the cut) and nothing happens.  If there was nothing to cross dissolve with I'd understand, but if I drag the Cross Dissolve manually and drop it in place the dissolve is perfectly OK.
    So, in what circumstances will CMD+D not do anything yet dragging the Cross Dissolve works fine?   It's frustrating not knowing when it will and won't work.

    So, in what circumstances will CMD+D not do anything yet dragging the Cross Dissolve works fine?
    Ctrl/Cmd+D will not drop a video transition (or Ctrl/Cmd+Shift+D for audio) if you don't have the desired track(s) targeted. Those are the selectors at the left end of the Timeline panel; those labeled Video 1, Video 2, Audio 1, Audio 2, etc. are those that control where transitions are applied. The track selectors also dictate which tracks are subject to the Previous Edit (PgUp)/Next Edit (PgDn) commands; tie those together and you can fly through adding transitions...
    ...or, if you have a pile of video transitions to add, hold down Alt (maybe Opt on Mac? can't recall...) and select the video clips or video portions of clips you want to transition between. You don't even need to have the track targeted; just go to Sequence > Apply Default Transitions to Selection, and video transitions will be applied. If you don't "solo" the video portions, this command will also simultaneously add audio transitions, so you can be as selective as you need to be.
    You can also copy and paste transitions, so if you've customized one, e.g. direction of a wipe, you can quickly apply it using the first method (Previous/Next Edit and Paste).

  • Can't apply default transitions or copy attributes

    I have no means of getting Premiere to apply default transitions.
    I select clips, try via Sequence menu, nada
    I place the cursor on the timeline Ctrl-D, nothing happens
    I copy a clip and paste attributes - NOTHING. No change at all.
    Could there be any setting I didn't set? Default transitions are set, and I can copy/paste audio attributes/clip effects, but nothing happens in Video.

    Select clip and then go to select Sequence / Apply Default Transition To Selection (you can make this into a Keyboard Shortcut) this will make a transition at beginning and end of the clip at the same time. If you only want just one side, select the side with the Roll Edit or Ripple Trim tool and hit Apply Default Transition To Selection.
    If you want to put a cross dissolve between a whole bunch of clips. Select clip and hit Apply Default Transition to Selection.

  • Links not working when I export to HTML or PDF

    I am a longtime Mac fanatic, but new to using Keynote. I am creating lectures for a class I teach where the computer in the classroom is Windows, so I have to export my Keynotes to another format.
    First I tried exporting to Powerpoint. That was a disaster. Since, I've tried exporting to HTML, exporting to PDF, and print -> Save as PDF (to get a PDF that prints nicely).
    My problem? Hyperlinks within my Keynote work fine when I play the presentation in Keynote. They also work when I export to PDF. However, they do not work when I generate the printable PDF OR when I export to HTML.
    I guess I understand them not working in the printable PDF, but not the HTML. Am I doing something wrong?
    Ideally I would like to export one PDF that I could use up on the projecter (with links working) and that students could view and/or print from their computers.
    Should I really have to have 2 PDF's - one for students who want to view it on screen with working links and one for people that want to print it out?!?!
    TIA for any help/advice!

    Do you have any filters applied to your clips?
    This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
    I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
    Anywho, export again, this time with "self contained" movie selected.
    Then try to import to Compressor.

  • Dynamic drill link is not working when i substitute some parameters in Plus

    Hi Gurus,
    Dynamic drill link is not working when i substitute some parameters in Discoverer plus(Tools--->Manage Links--->Edit links--->Parameters options), when i substitute some parameters it working when i click on drill value the link is popping up to go another worksheet.For some parameters link is not popping up. Could you please give any ideas.
    Thanks & Regards
    Vikram

    Hi Vikram
    Oh gosh, me and my big mouth!
    Patch 5381032 has two references to issues with links. You might want to discuss your scenario with Oracle and ask them if this patch would resolve your issue.
    Another solution would be to upgrade to 10.1.2.2 (available as a patch on MetaLink) which has most of the fixes from all of the patches applied. Again I would advise you speak with Oracle Support as they are the only one who can actually confirm whether this particular issue was fixed in this release.
    Are you by any chance seeing zero numbers display as 00 and are you seeing any graying out of icons? If so, then patch 5345595 (sometimes referred to as 5345528) fixes this and is a good patch to apply if you haven't already done so.
    All of these patches require a password which can only be obtained from Oracle by raising a service request to Support and stating the issues that you have.
    Hope this helps
    Regards
    Michael

  • The touch screen is not working when I am in the Music app of my iPod Touch.  How do I get it to begin working?  It just stopped today.

    The touch screen is not working when I am in the Music app of my iPod Touch.  How do I get it to begin working?  It just stopped today.
    Does anyone know what I can do?  I am unable to switch screens, and I can not see the track that is playing.  The only was I can switch between songs is to use the controls on my headphones.

    Try the stamdard fixes to rule out a software problem:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • Authorization Object is not working when report is modified.

    Hi BW Guru's
    We have Company Code as Authorization Object .and we have 3 company Codes (xxxx,yyyy,zzzz).where the users under Company code xxxx are not supposed to view company code yyyy,zzzz data etc.
    I modified an existing Report and transported to production.But the Authorization Object is not working for that report.The Report is defaultly displaying all the company codes data(xxxx,yyyy) for all the users.But for the other reports its(company code ) is working fine.
    What could be the problem?Is theproblem in transporting the objects.But i transported all the objects inluding auhorization object.
    Please send me the solution as it is very much urgent.
    The solution will be def. awarded with full points.
    Regards
    Sanjay

    hi Sanjay,
    please don't post the same question again, check and response back from your previous thread
    Re: Authorization Object is not working when report is Modified.
    hope this helps.
    would be nice if you reward for helpful answers to all of your previous postings, e.g
    docs related to RRI

  • Why Dynamic Parameter is not working, when i create report using stored procedure ?

    Post Author: Shashi Kant
    CA Forum: General
    Hi all
    Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
    Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
    is not shown to me when i referesh the report for viewing the results.
    I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
    ============================================================================================
    1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
    Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
    Dynamic Parameters in Action
    My question is that whether dynamic parameter is working with storedprocedure or not.
    When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
    One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
    Please reply soon , it's urgent
    Regards
    shashi kant

    Hi Kishore,
    I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
    expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
    =lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
    As to the second issue, please try to use the following expression:
    =Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
    Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl  file with all the size properties to us by the following E-mail address?  It is benefit for us to do further analysis.
    E-mail: [email protected]
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Reply to all using ItemReply does not work when specifying messageid

    Hello everyone,
    I am trying to use the ItemReply token to perform a "Reply to All"
    action on a mail item with a known message identifier and include the
    original message text in the response. According to the documentation,
    the call should be:
    ItemReply(7;1;"message-id")
    Still, when I execute this token, apparently only a normal reply action
    is performed because only the original sender is listed as recipient.
    (The message text is properly included)
    However, when I manually select the message in the GroupWise client
    first and then execute the same call without specifying the message id,
    all recipients of the original mail are listed in "To:" as expected:
    ItemReply(7;1)
    Could it be that the "ReplyTo" parameter is ignored or does not work
    when a message id is specified as parameter? (Setting "IncludeText" to 0
    does not change anything)
    Thanks in advance and best regards,
    Peter Hofer

    Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
    According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

  • I baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for