Apply different firewall controls on different adapters

Hi Mac Folks
As Mac Pro got three network adapters (2 x Gigabit Ethernet + 1 x Wi-Fi), and I prefer using the wireless connection to access the Internet and leaving the two wired connections for private file sharing and VM communciation.
Therefore, for the wireless connection, the firewall policy should be to disable all incoming traffic and allowing all outgoing access, while the wired connections should be firewall free or allowing specifc application protocols. But it seems the Firewall options under System Preferences have no such a detailed control.
Is it possible to apply different firewall controls on different adapters?
Any comments are welcome.
Thanks,
B

Bad news on ipfw -- DEPRECATED:
IPFW(8) BSD System Manager's Manual IPFW(8) NAME ipfw -- IP firewall and traffic shaper control program (DEPRECATED) SYNOPSIS
ipfw [-cq] add rule ipfw [-acdefnNStT] {list | show} [rule | first-last ...] ipfw [-f | -q] flush ipfw [-q] {delete | zero | resetlog} [set] [number ...] ipfw enable {firewall | one_pass | debug | verbose | dyn_keepalive} ipfw disable {firewall | one_pass | debug | verbose | dyn_keepalive} ipfw set [disable number ...] [enable number ...] ipfw set move [rule] number to number ipfw set swap number number ipfw set show ipfw {pipe | queue} number config config-options ipfw [-s [field]] {pipe | queue} {delete | list | show} [number ...] ipfw [-cnNqS] [-p preproc [preproc-flags]] pathname
DESCRIPTION Note that use of this utility is DEPRECATED. Please use pfctl(8) instead.

Similar Messages

My ipad 3 stopped charging, not the adapter and reboot doesn't do anything. I've tried all the tricks and different adapters and now my nearest Apple store is saying it just doesn't work and it'll be $300 to replace. Only had it 1 yr and half.

My ipad 3 suddenly stopped charging last week. I've tried different adapters, to no avail. I didn't drop it or spill anything on it. I don't have tons of apps, so plenty of memory. My husband took it to the Apple store for me and they tried charging it too even though I knew that wasn't the problem and then said it wasn't working (no kidding) and then told him it would be $300 to replace. Seeing as I've only had it for a year and a half and it cost more than twice that to begin with, I'm a little ticked that it stops charging, a problem I know is very common according the all the message boards and they want to charge me $300. I've always heard that Apple was so good to it's customers, but my iphone has been a nightmare, and now my ipad won't charge. Also, I've tried the reset options I've read about and none worked. Sorry, just really upset. I thought I was paying all this money for better quality and now I feel foolish for having done so. Anybody with any ideas I, or the genius at Apple haven't thought of? Help is appreciated. Thanks.

May be some help on one of these links.
Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Apply different styles to text within a Text field?

I am working on an application that consumes a user-generated
HTML file and displays it on part of a Flex screen. The main
problem is HTML can look something like this (for example):
Hello <span class="greeting">Mr. Smith</span>,
how are you doing <span class="title>today</span>.
Unfortunately, the Flex Text control only accepts a single
style that is applied to all text within the control and the
htmlText property only allows for very basic HTML markup and does
not include support for applying styles to a part of the text.
I've thought about creating a series of Text controls (each
with its own style as needed) and putting them together in an HBox.
However, this messes up word wrapping if the text exceeds the width
of its container.
Anyone have any ideas how to solve this problem?
Thanks!
Dustin

Could you please elaborate your requirement since you can have different instances of synchronized text have different formatting.
So your original menu can consist of various text blocks (marked with different content tags) and then duplicate them and apply different formatting to the copied text. The text is still linked and an update to one will get synced to the other.
If you are looking at applying different styling to chunks of text within one textframe (marked using a content tag), THAT is not possible, since the tagged content is supposed to maintain integrity of text and not the associated styling (which you should be able to apply independently).
Hope that makes sense.
Cheers,
Vikas

Applying different b/w point operations to same plate

I have several shots in a project that have composited TV feeds burned into television screens.
these are log 10bit Prores files.
The burn in element and the BG element have different black and white points.
To color correct these shots properly i need to apply different black and white point operations to the portion of the plate that is the screen and the surrounding BG environment.
I am a first time Color user and this does not seem like something that Color is able to do.
Am I missing something?
At first glance it seems that the secondaries room would be able to accomplish this, but the geometry I can use in the secondaries room only seems to mask off operations I do with the high mids and lows color wheels---not the luma, sat and hue curves.
If i want to isolate a luma operation in the secondaries room I can only isolate it via a color key--which just will not work for these shots.
Any ideas?

No, I concur that Curve corrections behave quite differently. I don't use them at all. They seem to be mostly suited to a Photoshop approach, and are a boon to the stylus/mouse interface. But otherwise, not my first choice for a couple of reasons. The entire scale is being re-mapped with control points, which can accelerate banding. They used to be incredibly noisy and are still not keyframe-able -- so if you ever need to do something like that, you'll be locked out of the game.
I believe the difficulty you're encountering is that the 'mids' adjustment doesn't, and can't achieve the same gamma coefficient as the custom characteristic that you're feeding in by using the luma curves. Its something we could do in Power Windows with daVinci, but the implementation in FinalTouch/COLOR doesn't allow for a customized gamma transfer characteristic within secondaries. There is a custom curve available in the COLORFX room.... but the catch there is that there is no access to the user shape vignette. You might have to back up a step and correct the plates separately and re-composite them. Why wouldn't you keep the SHAKE work, or is there a contextual reason for trying to re-invent this particular wheel in COLOR?
jPo

How to apply different keyboard shortcuts to an actions with the same name but in different menus within one application?

Hi,
Hopefully someone can help. I have the application "djay" and in two different menus there is the action "Eject". I was wondering if it's possible to apply different keyboard shortcuts to those actions with the same name? I can't see how to do it as it seems you can only write the action but as there are two it doesn't seem to work for me.
For example:
djay>Table-1>Eject - ⌘⇧1
djay>Table-2>Eject - ⌘⇧0
Thanks in advance for any help!!

A NodeList doesn't only contain 1 element. In your example it contains ALL <Data> elements inside the document.
NodeList nodes = document.getElementsByTagName("Data");
System.out.println(nodes.getLength() + " \"Data\"-elements found");
for(int i=0; i<nodes.getLength(); i++) {
Node node = nodes.item(i);
}

How to apply different styles to multiple spry accordian panels?

Hi all,
I have a website that I'm building that has multiple spry accordian features on it.
I am trying to apply different styles to each accordian. A problem arises when I try to place an accordian within another accordian.
I have styled two different background images for two of the accordians for the styles (AccordionPanelTab, AccordionPanelTabHover and AccordionPanelOpen AccordionPanelTabHover) which work fine.
When I try and place an accordian within another accordian the background image for this accordian for the styles (AccordionPanelTab and AccordionPanelOpen AccordionPanelTabHover) has the different style applyed that I stated in the accordion.css file, however the style (AccordionPanelTabHover) has the same style as the accordian it is within even though in the accordion.css file I stated a different background image.
I hope all this makes sence below is my source and CSS Code.
I appriciate any help that can be given to help resolve this issue I am running in too.
Source Code
<div id="content">
<p><span class="first_header_word_packages">Welcome</span> <span class="header_word_packages">to our packages page</span></p>
<p class="content_txt">Here you can build the website package that matches your business needs as well as being able to work out the cost of your site without having to worry about scary hidden costs at a later date.</p>
<p class="content_txt"> We have two packages available for our customers;</p>
<div id="Accordion1" class="Accordion" tabindex="0">
<div class="AccordionPanel">
    <div class="AccordionPanelTab"></div>
    <div class="AccordionPanelContent">
   <p>Text Goes Here</p>
    <div id="Accordion2" class="Accordion" tabindex="0">
      <div class="AccordionPanel">
    <div class="AccordionPanelTab"></div>
    <div class="AccordionPanelContent">
    <p>Text Goes Here</p>
    </div>
</div>
</div>
    </div>
</div>
</div>
<div id="Accordion3" class="Accordion" tabindex="0">
<div class="AccordionPanel">
    <div class="AccordionPanelTab"></div>
    <div class="AccordionPanelContent">
         <p>Text Goes Here</p>
      <div id="Accordion4" class="Accordion" tabindex="0">
        <div class="AccordionPanel">
    <div class="AccordionPanelTab"></div>
    <div class="AccordionPanelContent">
     <p>Text Goes Here</p>
    </div>
</div>
</div>
    </div>
</div>
</div>
</div>
CSS
@charset "UTF-8";
/* SpryAccordion.css - version 0.5 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
/* This is the selector for the main Accordion container. For our default style,
* we draw borders on the left, right, and bottom. The top border of the Accordion
* will be rendered by the first AccordionPanelTab which never moves.
* If you want to constrain the width of the Accordion widget, set a width on
* the Accordion container. By default, our accordion expands horizontally to fill
* up available space.
* The name of the class ("Accordion") used in this selector is not necessary
* to make the widget function. You can use any class name you want to style the
* Accordion container.
.Accordion {
          border-left: solid 1px gray;
          border-right: solid 1px black;
          border-bottom: solid 1px gray;
          overflow: hidden;
/* This is the selector for the AccordionPanel container which houses the
* panel tab and a panel content area. It doesn't render visually, but we
* make sure that it has zero margin and padding.
* The name of the class ("AccordionPanel") used in this selector is not necessary
* to make the widget function. You can use any class name you want to style an
* accordion panel container.
.AccordionPanel {
          margin: 0px;
          padding: 0px;
/* This is the selector for the AccordionPanelTab. This container houses
* the title for the panel. This is also the container that the user clicks
* on to open a specific panel.
* The name of the class ("AccordionPanelTab") used in this selector is not necessary
* to make the widget function. You can use any class name you want to style an
* accordion panel tab container.
* NOTE:
* This rule uses -moz-user-select and -khtml-user-select properties to prevent the
* user from selecting the text in the AccordionPanelTab. These are proprietary browser
* properties that only work in Mozilla based browsers (like FireFox) and KHTML based
* browsers (like Safari), so they will not pass W3C validation. If you want your documents to
* validate, and don't care if the user can select the text within an AccordionPanelTab,
* you can safely remove those properties without affecting the functionality of the widget.
.AccordionPanelTab {
          background-color: #CCCCCC;
          border-top: solid 1px black;
          border-bottom: solid 1px gray;
          margin: 0px;
          padding: 2px;
          cursor: pointer;
          -moz-user-select: none;
          -khtml-user-select: none;
/* This is the selector for a Panel's Content area. It's important to note that
* you should never put any padding on the panel's content area if you plan to
* use the Accordions panel animations. Placing a non-zero padding on the content
* area can cause the accordion to abruptly grow in height while the panels animate.
* Anyone who styles an Accordion *MUST* specify a height on the Accordion Panel
* Content container.
* The name of the class ("AccordionPanelContent") used in this selector is not necessary
* to make the widget function. You can use any class name you want to style an
* accordion panel content container.
.AccordionPanelContent {
          overflow: auto;
          margin: 0px;
          padding: 0px;
/* This is an example of how to change the appearance of the panel tab that is
* currently open. The class "AccordionPanelOpen" is programatically added and removed
* from panels as the user clicks on the tabs within the Accordion.
.AccordionPanelOpen .AccordionPanelTab {
          background-color: #EEEEEE;
/* This is an example of how to change the appearance of the panel tab as the
* mouse hovers over it. The class "AccordionPanelTabHover" is programatically added
* and removed from panel tab containers as the mouse enters and exits the tab container.
.AccordionPanelTabHover {
          color: #555555;
.AccordionPanelOpen .AccordionPanelTabHover {
          color: #555555;
/* This is an example of how to change the appearance of all the panel tabs when the
* Accordion has focus. The "AccordionFocused" class is programatically added and removed
* whenever the Accordion gains or loses keyboard focus.
.AccordionFocused .AccordionPanelTab {
          background-color: #3399FF;
/* This is an example of how to change the appearance of the panel tab that is
* currently open when the Accordion has focus.
.AccordionFocused .AccordionPanelOpen .AccordionPanelTab {
          background-color: #33CCFF;
/* Rules for Printing */
@media print {
.Accordion {
overflow: visible !important;
.AccordionPanelContent {
display: block !important;
overflow: visible !important;
height: auto !important;
#Accordion1 .AccordionPanelTab {
height:75px;
width:285px;
background:url(../images/package_spry_tab_bg1.png);}
#Accordion1 .AccordionPanelTabHover,
#Accordion1 .AccordionPanelOpen .AccordionPanelTabHover {
background:url(../images/package_spry_tab_bg1_RO.png);}
#Accordion2 .AccordionPanelTab {
height:44px;
width:469px;
background:url(../images/packages_spry1.png);}
#Accordion2 .AccordionPanelTabHover,
#Accordion2 .AccordionPanelOpen .AccordionPanelTabHover {
background:url(../images/packages_spry1_ro.png);}
#Accordion3 .AccordionPanelTab {
height:75px;
width:285px;
background:url(../images/package_spry_tab_bg2.png);}
#Accordion3 .AccordionPanelTabHover,
#Accordion3 .AccordionPanelOpen .AccordionPanelTabHover {
background:url(../images/package_spry_tab_bg2_RO.png);}
#Accordion4 .AccordionPanelTab {
height:44px;
width:469px;
background:url(../images/packages_spry2.png);}
#Accordion4 .AccordionPanelTabHover,
#Accordion4 .AccordionPanelOpen .AccordionPanelTabHover {
background:url(../images/packages_spry2_ro.png);}

Okay guys,
I figured it out, if anyone was having the same problem as me and looking on this thread for the answer, here it is.
Firstly if you're wanting to seperatly style two or more Spry Accordions that are not within each other e.g.
<div id="Accordion1" class="Accordion" tabindex="0">
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 1</div>
    <div class="AccordionPanelContent">
   <p>Content Goes Here </p>
</div>
</div>
</div>
<div id="Accordion2" class="Accordion" tabindex="0">
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 1</div>
    <div class="AccordionPanelContent">
   <p>Content Goes Here </p>
</div>
</div>
</div>
You don't have to do this, as long as you have seperate ID's for the divs (which dreamweaver automatically does anyway) you'll be fine.
However if for some reason you want to put one accordion inside another like I did e.g.
<div id="Accordion1" class="Accordion" tabindex="0">
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 1</div>
    <div class="AccordionPanelContent">
   <p>Content Goes Here </p>
<div id="Accordion2" class="Accordion" tabindex="0">
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 1</div>
    <div class="AccordionPanelContent">
   <p>Content Goes Here </p>
</div>
</div>
</div>
</div>
</div>
</div>
Too style Accordian 1 & 2 so their tabs both have different backgrounds and Hover background when the content panel is open and closed you have to style it in the CSS they following way;
CSS
#Accordion1 .AccordionPanelTab {
height:75px;
width:285px;
background:url(../images/package_spry_tab_bg.png);}
#Accordion1 .AccordionPanelTabHover,
#Accordion1 .AccordionPanelOpen .AccordionPanelTabHover {
height:75px;
width:285px;
background:url(../images/package_spry_tab_bg_RO.png);}
#Accordion2 .AccordionPanelTab {
height:44px;
width:469px;
background:url(../images/packages_spry.png);}
#Accordion2 .AccordionPanelClosed .AccordionPanelTabHover,
#Accordion2 .AccordionPanelOpen .AccordionPanelTabHover {
height:44px;
width:469px;
background:url(../images/packages_spry_ro.png);}
Normally when styling two seperate spry accordions you can just use the following code
#Accordion1 .AccordionPanelTab {
height:75px;
width:285px;
background:url(../images/package_spry_tab_bg.png);}
#Accordion1 .AccordionPanelTabHover,
#Accordion1 .AccordionPanelOpen .AccordionPanelTabHover {
height:75px;
width:285px;
background:url(../images/package_spry_tab_bg_RO.png);}
The only difference with styling a Spry accordion within another to ensure they have different hover backgrounds when the content panel is open and closed is ".AccordionPanelClosed".
Hope this helped anyone who was having the same issue I was.

How to apply different Logical operations to N.of Signals

Hello all,
Please help me if anyone have idea about this.
I have “N” number of signals. I want to apply different Logical operations for this.
For Example:
(((SigA >= 30 && SigB <=55) || (SigC = 42)) && (SigD > 45))
((((SigD >= 89.25 && SigF <=55.568) ||(SigG = 156.89)) && (SigA >= 45)) || ((SigF – Sig A) >25))
Here Conditions will change every time. User can input different conditions (like Excel calculations). I need to check signals as per these type of conditions. Is there is any tool kits available in LabVIEW / we need to develop?
Currently I’m thinking about string manipulations to extract the each condition . Once first condition is finished then check this results with next conditions (so on..)
Munna

Hi GerdW,
After long time again I stated doing this task. Could you please help me in this.
As per my snippet, at 1st making array based on given String. From that string I need to check where open & closed brackets are coming to do logical operations.
For Example: (2 OR ((1 AND 2) OR 3))
Index
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
String
2
O
R
1
A
N
D
2
O
R
3
Please give me any idea/sample VI for the same.
Here, 1,2 & 3 are Indices of Boolean 2D Array.
Munna

How do I apply different margins to different section in the same document?

In Pages 5, how do I apply different margins to different section in the same document? there are is no layout break like in Pages 4.

Use the Text Format Pane, Layout Tab, Indents.
You could do the same thing by dragging the margin stops on the Ruler.
Jerry

Apply different font styles in single text frame

hi all
how can i apply different font styles in a single text frame using indesign script ?
for example :
"dasdnasndasndlasndnasdlasdasdas"
may i know is it possible to do that and how to do that ?
thanks

You can set (as well as read) every single property of any text range with scripts. This is javascript; it assumes you text cursor is inside a frame with some text.
* Setting some specific characters to a color:
app.selection[0].parentStory.characters.itemByRange(5,10).fillColor = "Red";
* Change the font of words:
app.selection[0].parentStory.words[3].appliedFont = "Arial\tBold";
* .. or just the style:
app.selection[0].parentStory.lines[2].fontStyle = "Italic";
* .. or any other attribute (this one requires you to have at least 5 characters selected):
app.selection[0].characters[5].underline = true;
Of course these operations are not limited to something you select; they work the same with any text frames you can refer to.
app.activeDocument.textFrames[1].paragraphs[2].appliedCharacterStyle = "charstyle";

How to apply different CSS styles to different table cells?

I have an h:dataTable table and I would like to apply different CSS styles to different table cells depending on their content. If I were doing JSP I would probably have a <c:if> test on the cells, and give them a style name depending on contents, and then define the styles in a separate style sheet. Is there a way in JSF to do the equivalent? Thanks.

mitchgart wrote:
BalusC wrote:
How to achieve a cell-specific style is already answered in my 1st reply of this topic.That tells how to apply a style to the text (or other content) inside a cell but not how to apply a style to the <td> as a whole. It would work for something like text font or text color but not cell border.
I'm thinking I can mark the content somehow and then have javascript traverse the DOM, find marked content, and traverse outward to the enclosing <td>. Is there a better way?BalusC already spoke about rowClasses and columnClass attributes, I assume those are insufficient.
The Tomahawk dataTable component has the rowStyleClass and rowStyle attributes for assigning CSS to the HTML tr tag. One is allowed to reference the row data variable when assigning values to these. However, see https://issues.apache.org/jira/browse/TOMAHAWK-523 for workarounds to bugs in some implementations.
The Tomahawk column component has the styleClass and style attributes for assigning CSS to the HTML td tag. These also may reference the row data variable.

How to apply different styles to Portlets on the same Portal page?

How do you apply different styles to Portlets on the same Portal page?
I'm new to this kind of thing, but understand that something called "cascading style sheets" can help here?
What are these, how do you use them, and can you make different Portlets (all types - PL/SQL, Java, Applications, etc) on the same Portal page have different styles assigned?
Thanks!

Jeff,
Apply Oracle Portal styles at the region level. Your portlets within each region will inherit the style defined for the region.
You may want to check out Report #40050 at portalcenter.oracle.com, "Design an Attractive and Compelling Portal Interface" for a good overview of the various design features of Oracle Portal.
Here is the link:
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/OWSF_2003_PAPERS/40050_STOVER.PDF
Regards,
Jay

How to apply different styles to multiple spry collapsible panels?

Hello every.
I would really appreciate some help with this problem I am coming up against.
I am creating a website which has multiple Spry collapsible panels in it. I applied the styles I wanted for the first Spry collapsible panel I did in the styles panel with no problems what so ever.
However when I go to apply the styles I want for my second and every other Spry collapsible panel, when I applied the style I wanted it changed the first panel I did. I’ve tried giving all my collapsible panels different Div ID’s but no luck. I just can’t seem to apply different styles to each of my collapsible panels.
Can someone please advise me how to do this?
Thank you in advance for your help.
Kind regards
Elliot

I've figured the most of it out.
By giving the Spry Collapsible Panel that you want to style differently a separate ID and class and then duplicating the original Spry Collapsible Panel style in the CSS style panel on the right and renaming them the same name as the panel you want to style differently it will allow you to style it differently to all the other panels apart from the Hover.
I've tried everything! Below is the code I'm using for the two Collapsible Panels I want to style Differently.
I only want to have different Tab backgrounds and Hover backgrounds
1st Spry CollapsiblePanel
Code:
<div id="CollapsiblePanel1" class="CollapsiblePanel">
<div class="CollapsiblePanelTab" tabindex="0">Tab</div>
<div class="CollapsiblePanelContent">Content</div>
CSS Style
.CollapsiblePanelTab
.CollapsiblePanelTabHover, .CollapsiblePanelOpen .CollapsiblePanelTabHover
2nd Spry CollapsiblePanel
Code:
<div id="CollapsiblePanel2" class="CollapsiblePanel2">
<div class="CollapsiblePanel2Tab" tabindex="0">Tab</div>
<div class="CollapsiblePanel2Content">Content</div>
</div>
.CollapsiblePanel2Tab
.CollapsiblePanel2TabHover, .CollapsiblePanelOpen .CollapsiblePanel2TabHover
As I said the Tab works both I have two seperate background images for the Tabs but I can only seem to have one background for the hover.
Has anyone any ideas on how to get around this?
Kind regards
Elliot

How can i apply different color for each cell in jlist component?

hi guys i need your help and sorry if my english is very bad..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..
Edited by: ryrene on Mar 21, 2010 12:13 AM

ryrene wrote:
hi guys i need your help and sorry if my english is very bad.
..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..I'll see your tnx, and raise you dve bmbrs & nplm.

How to apply different colors to specific rows in JTable

hi,
Anybody could tell me the way of colorising the rows in jtable.. I want to apply different colors to diff rows..
If i get a piece of code that could help me a lot..
thanks in advance,
Sapna

you'll find the answer at http://www2.gol.com/users/tame/swing/examples/SwingExamples.html

Applying Different Product Classifications To Different Groups

Sorry if I'm missing the obvious here, but I see no way of applying different product classification updates to different groups of PCs either through WSUS or through GPOs.
Originally in my environment we had one WSUS policy which my predecessor had rolled into the Default Domain Policy. In an effort to get away from this, and also to manage which types of updates get applied to which systems (critical and security updates
for some, and all updates to others) I created two new GPOs: WSUS > All Updates and WSUS > Selective Updates.
However, in configuring the GPOs I realized there is no way to designate the types of updates that are/aren't approved. So I went back to WSUS, and under the Options screen I opened 'Products and Classifications' and then switched to the 'Classifications'
tab. So here I can select/de-select individual update types, but there's no way for me to turn them on/off granularly. In other words, this seems to be a global setting.
So my question is this: How do I set up WSUS to automatically approve and install *only* security and critical updates for one group of systems, and automatically approve and install *all* updates for another group of systems? Do I need to use GPOs
in tandem with WSUS, or can WSUS do it on its own? Where would I go to configure something like this.
Sorry for the detail, but I'm really not seeing anything obvious anywhere and I can't believe I'd have to build a secondary WSUS server just to set up multiple classification groups.
Thanks,
Bob

Sorry if I'm missing the obvious here, but I see no way of applying different product classification updates to different groups of PCs either through WSUS or through GPOs.
That's because you don't. The WSUS server has one repository of updates, defined by Product Category, Update Classification, and Language. Updates are then targeted to computers by placing computers in a target group and approving an update for
that target group. All computers in the target group will evaluate each approved update, and if the update is installable, the computer will download and install the update.
Originally in my environment we had one WSUS policy which my predecessor had rolled into the Default Domain Policy. In an effort to get away from this, and also to manage which types of updates get applied to which systems (critical and security updates
for some, and all updates to others) I created two new GPOs: WSUS > All Updates and WSUS > Selective Updates.
So, all you really did here was declare two different WSUS Target Group(s). How you actually apply those GPOs to your client systems will determine which of either, or both, groups that a client system is a member of.
How do I set up WSUS to automatically approve and install *only* security and critical updates for one group of systems
You create an Automatic Approval rule to approve Security Updates and Critical Updates for THAT GROUP. (e.g. the "Selective Updates" group).
and automatically approve and install *all* updates for another group of systems?
You create an Automatic Approval rule to approve ALL update classifications for the "All Computers" group (note that you don't even need your "All Updates" group, you only need the "Selective Updates" group).
I will also take the moment here to severely warn you that approving ALL UPDATES for ALL COMPUTERS is a very dangerous thing to do, and frankly you don't even need a WSUS server to do that. Just enable Automatic Updates on the system and let 'em get their
updates from Microsoft directly and you'll have exactly the same behaviors with a lot less administrative overhead.
Additionally, based on the nature of the questions in this post, I would encourage you to thoroughly review these two resources in TechNet:
Understanding Patch and Update Management: Microsoft's Software Update Strategy
Manage Windows Server Update Services 3.0 SP2 in the WSUS Operations Guide
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Apply different firewall controls on different adapters

Similar Messages

Maybe you are looking for