Apply globals after provisioning

Hi All,
I have this workflow where provisioning is done before approval. Within this approval process a manager has a form where he can apply extra information. How do you push this new information (within the same workflow) into that userView? After the OOTB provisioning action, is the userview still available or do you have to check it out again before the approval steps are done? How is this kind of workflow realized.
Any help is appreciated!!
Elger

If the question is not clear to you guys or you need additional information, please say so.
Cheers,
Elger

Similar Messages

Template Changes Do Not Apply Globally

I am having issues with Templates.
I have setup editable regions and saved my pages as
templates, etc but nothing seems to work.
How do I make changes to editable regions and have those
changes apply globally throughout my pages which all have the same
editable regions?
Also, when I open a new page from the templates I saved, it
only allows changes to the editable regions??? What gives? Isn't
the whole point of opneing up "new from template"
to create a new pages which shares the same editable
regions?

> Maybe we should start here then...
> Usually, (the way I am used to building sites), is I
create a page I like,
> then
> whenever I I want to create a new page, based on that
design I open that
> page
> and do Save As a different file name.
This is the wrong way to use templates.
To use templates, you must spawn a child from the template
using FILE | New
from Template...
This will create a page that no longer contains "Template"
markup, but
instead contains "Instance" markup so that DW can tell what
to do with
editable/non-editable regions.
> The alternative to the Save As method, is that I choose
create
> new from template, but then I typically have to change
more stuff.
That's wrong. It's not an alternative - it's the right way to
do it. And
what "more stuff" do you have to change?
> I have tried making
> changes to that page and uploading - I mean putting, but
it changes
> nothing
Of course, because you still have not understood how
templates work. They
have NO function on the server. They only work INSIDE of DW
to change your
local files. It's the changed local files that must be PUT to
the server,
NOT the template.
For what it's worth, I cannot stand what the nasty webforum
does to your
post....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"DJ Website Designer" <[email protected]>
wrote in message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User you've missed
> the
> purpose and process entirely.-- Alan Adobe Community
Expert, dreamweaver
>
http://www.adobe.com/communities/experts/
Maybe we should start here
> then...
> Usually, (the way I am used to building sites), is I
create a page I like,
> then
> whenever I I want to create a new page, based on that
design I open that
> page
> and do Save As a different file name. Then, since the
template regions,
> i.e.;
> the navigation or footer, or anything that might have to
be altered later
> and
> global changes applied are already on that copied page,
I can change one
> or the
> other and all the changes are applied to all pages which
share the
> navigation
> or footer, etc. The alternative to the Save As method,
is that I choose
> create
> new from template, but then I typically have to change
more stuff. So,
> for
> example the site in question here:
http://towtruckswreckerscarriers.com
I
> have
> several pages which may be duplicated time and time
again, with only
> certain
> portions of them being changed to suit the new page.
Pages like this would
> be
>
http://towtruckswreckerscarriers.com/wrecker-new-tow-truck-2007-red-ford-f550-su
> percab-xlt-7EA86941.html Obviously if I am creating gobs
of these pages,
> if I
> make any changes to the main navigation or any other
elements which are
> global,
> I would like these changes to appply to all these pages
as well. SO...
> Not
> having ESP to DW's designer's philisophy (and Help Pages
certainly don't
> convey
> it), that's what I thought the purpose of using DW
templates was. To
> eliminate
> the need of opening each and every page and updating
site features over
> and
> over, then re-uploading (putting), pages on my host
server. I do have a
> folder
> in my directory named templates, with a file index.dwt
(I have tried
> making
> changes to that page and uploading - I mean putting, but
it changes
> nothing).
> So, in my case how would I save a page to be used over
an over again,
> which I
> could make multiple copies of and yet still change stuff
on those pages
> (like
> images, text, Title, metas) PLUS have the ability to
make a change to site
> navigation, etc and see it populate all the pages I have
already created?
>
>

Approver step after provisioning

Hello all,
Is it possible to make in CUP additional approver step after provisioning new user (via CUA)?
The goal is to have a manual step in SAP HR to assign structural authorization based on request comments after new user is created in HR system with approved roles. HR employee should do this step and close a CUP request only after that.
Thanks,
Anton.

Hi,
As Alpesh mentioned it is not possible in CUP/AE.
Once the CUP workflow completed all the stages approvals, the userid is created in target systems and an email will be sent out to the corresponding user (if auto-user provisioning enabled in CUP configuration)(notifications to other people too depending on the CUP configuration).
You could try forwarding the successful userid creation email notification to HRgroup email id, HR will assign structural profile and then forward the email to the corresponding user. ( I never tried this scenario - just a thought).
Thanks
Himadama

FF753 - Apply an Expense Provision with Input Tax NVV

Good afternoon all,
My problem is that my client has firstly posted an expense provision: Expense (40) <===> (39 CME) Vendor
After that, the user wants to apply this provision and consider tax code N4 (Input Tax NVV: Non-deduct.Input Tax - 8%). Due to that, this tax code will not have posting position (Table T030K empty). The future posting should be something like this: (29 CME) Vendor <==> (31) Vendor
Both accounts have been customized with Tax category no blank.
We get the error FF753.
We have try to set this message like warning and we get the posting but if we run the Spanish VAT report S_ALR_87009895 (Advance Return for Tax on Sales/Purchases) we do not get any VAT information related. We have only this problem with Input Tax NVV.
Any idea?
Please let me know.
Thank you a lot. Regards,
Daniel

Issue is resolved ... I misunderstood the logic. Tax Code is linked to a GL account. And when I run PRRW, I see the relevant Tax amount in against the trip

Project Server 2010 - Applying CUs after SP2?

I am taking over support of a development environment for Project Server 2010 and would like to update it to a more recent level of CU. We have one DB server, and all other components are on one additional server.
Current levels from the Control Panel: MS Proj Server 2010 14.0.7015.1000, MS Sharepoint Server 2010 14.0.7015.1000, Service Pack 2 KB2687452 applied.
Farm Info: Config DB version: 14.0.6134.5001.
1. Can I apply the April CU and it will include all the previous CUs since SP2? Do I need to install the CUs one at a time?
2. For each CU, do I install the Sharepoint component first, then Project?
3. I keep reading information about problems with SP1 but I don't see it in my Control Panel as installed (just SP2.) Can I install Feb or April 2014 CU and avoid whatever issues were happening with July 2013 CU and SP1?
4. Any advice on next steps is greatly appreciated.

Hi LD2009,
here are the answers to your questions:
Q1: The CU April 2014 has included all fixes since SP2. So you don't need to install older CUs.
Q2: You don't need seperate packages for SharePoint and Project Server. There is a Rollup-Package which updates both SharePoint
and Project Server together. You can find it
here.
Q3: You must enshure that SP2 was installed and deployed correctly. In the Central Administration check if all databases were upgradet to the latest Level. If not, run psconfig.
If you have the BCS Service configured then you have to run the following PS script (otherwise the BCS database would remain in the compatibility mode):
(Get-SPDatabase | ?{$_.type -eq “Microsoft.SharePoint.BusinessData.SharedService.BdcServiceDatabase”}).Provision()
For all other issues we need more details.
For more informations read the blog posts from
Brian Smith and
Stefan Goßner.
I hope this helps.
Regards
Bernhard Fischer
Bernhard Fischer [MVP] | www.wodey.de

Dreamweaver cannot find, and thus apply, templates after uploading the website to server

Hi,
I am using Dreamweaver 8, and my problem is like this:
When the site was first built using Dreamweaver, I created a template, after which I was able to apply it to other existing/new pages by [Modify/Templates/Applying Templates to Page].
However, after uploading all te files to the server, and then downloading them back to my computer, when I tried to apply a template to an existing/new page by [Modify/Templates/Applying templates to Page], Dreamweaver showed that there is "no template" in the entire site - despite the fact that the folder containing the .dwt file was successfully downloaded from the server.
Also worth mentioning is that, for the pages that are already attached to the template before I sent the files to the server, they are working just fine even after I have uploaded them.
I saved the files in the following manner:
>ROOT FOLDER
>>>TEMPLATE FOLDER
>>>>>>template.dwt
>>>indext.html
>>>OTHER PAGES FOLDER
>>>>>>page1.html
>>>>>>page2.html
I also tried to save the template.dwt directly under "ROOT FOLDER", but that didn't work neither.
Is somebody else facing the same problem? Or does anyone know how to solve this issue? It would be much appreciated.
Thanks!

Your Files panel (F8) should look like this:
site - YourSiteName (C:\YourSiteName)
     index.html
     -OtherPages
          page1.html
          page2.html
     -Templates
          template.dwt
If your .dwt file is located in any location other than the Templates folder, it won't work.
Templates are not a server-side technology. Templates only work on local files in Dreamweaver.
I suggest you open your template and examine the code to ensure it is valid and that the Editable Regions are properly defined.
http://validator.w3.org/
Then open a child page made from that template to ensure it is pointing to the correct Template.dwt file in your Templates folder.
Nancy O.

OM: Apply Hold after new a order line on line level..

Hi All,
There is an issue that we have to apply hold on line level when order is changed.(include update line or new line)
And we try to use trigger(with PRAGMA AUTONOMOUS_TRANSACTION) to call Apply Hold API.
It work when existed order lines are changed.
But it not work when new a order line, at the after-insert moment, it CAN NOT apply Hold on this immature order line.
How can we fulfill this requirement?
Or the requirement is nonsense...
Any suggestion will be appreciated.
Best regards,
Zhxiangl

R U going to use any bapi to split the line items???

When I pressed Apply button after autoupdate, i get window reading as connecting to server and it goes on for hours together and no end and no further message.

I proceeded to update automatically and the I got the window to apply. I clicked the "Apply" button. The browser closed and reopened immediately, and my antivirus asked me whether to allow the software. I clicked allowed. Then I got the window reading as "Connecting to server etc.". I was waiting for further development. But this window keeps on showing same message without any progress even after I kept the same opened for nearly1 hour.

If you have problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Logical stopped applying logs after install STATSPACK

Pl. help urgent
Oracle 10.2.0.1.0
After installing statspack @spcreate installed sucessfully
@spauto create job sucessfully
But the Logical stdby stopped applying the logs with the following error message
alert.log
================
LOGSTDBY stmt: grant execute on dbms_shared_pool to execute_catalog_role
LOGSTDBY status: ORA-04042: procedure, function, package, or package body does not exist
LOGSTDBY id: XID 0x000d.01b.00009d72, hSCN 0x0000.20c7cf14, lSCN 0x0000.20c7cf14, Thread 1, RBA
0x6642.0000433b.138, txnCscn 0x0000.20c7cf17, PID 5544, ORACLE.EXE
(P006)
LOGSTDBY Apply process P006 pid=45 OS id=5544 stopped
Wed Dec 19 16:13:10 2007
================
Please help if anyone has any idea on this forum, how do i start the logs applying the to logical standby.
Thanks

Hi,
Will the below steps clear the above error:
Sql > alter database stop logical standby apply;
Sql> EXECUTE DBMS_LOGSTDBY.PURGE_SESSION;
Sql> alter database guard all;
Sql> EXECUTE DBMS_LOGSTDBY.APPLY_SET('MAX_SGA', 3000);
Sql> Exec dbms_logstdby.apply_set('MAX_SERVERS',25);
Sql> EXECUTE DBMS_LOGSTDBY.APPLY_SET('APPLY_SERVERS',12);
Sql > alter database start logical standby apply;
Please advice

Bridge applies rating after modifying metadata

Working in Bridge CS3, adding or modifying metadata with File > File Info, after I click okay on the metadata template the thumbnail shows a Label color that wasn't there before. If the file did already have a Label, the color is changed. How can I stop the Lable from being applied when I don't want one?
- Greg

Thanks, Omke. I just reset Bridge preferences (for the second time since this started happening), but a label is still applied as soon as the changed metadata (Description, Keywords, Copyright Status) shows in the Bridge panel.
What's also strange is that at first the label was yellow, but after I changed the name of the yellow label, what gets automatically applied is a white label. I don't remember, but there's a good chance that this behavior started when I applied the yellow label to a file immediately before or after changing the metadata (and perhaps Bridge wasn't done processing whichever of those actions came first?).
MacBookPro, 2.4 GHz Intel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAM, OS-X 10.4.11, Bridge 2.1.1.9, Photoshop CS3 10.0.1. I also have InDesign CS3 running at the same time.
I have a similar problem several on my PC (Intel Pentium 4, WinXP Pro SP3, Bridge 2.1.1.9, PSCS3), except that instead of a label, a 2-star rating is applied to the images. I asked about this several months ago on the Bridge Windows forum but nobody was able to solve the problem. I also tried trashing the Bridge prefs on this system, with no effect.
Thanks for any suggestions.
- Greg

Bridge applies rating after entering metadata

If I enter metadata (description, keywords, title, etc.) to files using Bridge (v2.1.1.9 with PSCS3 on WinXP Pro), a 2 star rating is automatically applied to the photo. I'm entering the metadata by going to File > File Info and either typing in the data, selecting from drop downs for previously entered data, or pasting from another application. This did not happen in previous versions of Bridge that I've used. Is this a bug or do I need to toggle some setting (I don't see anything obvious in Preferences).
- Greg

The files are Nikon D2X NEF raw files and TIFs processed from same with ACR.
It happens whether I am modifying existing metadata or adding metadata to a new NEF file.
If the files already have a rating, it is superceded by the 2-star rating after adding/modifying metadata.
This is with Bridge v2.1.1.9, Camera Raw v 4.3.1 and Photoshop v 10.0.1 on an Intel P4 PC running Windows XP Pro.
I don't remember when this started happening but it is within the past few months. I'm wondering if it is something in the most recent Bridge update.
- Greg

"Variable applied"display after query execution through WAD incorrect

Hi ,
In my queries i provide varible entries for 0FISCPER, 0FISCVARNT along with other variables.In the query i dispplay the values for the variables applied.When i run these queries through 2004s WAD if i were to select 0FISCPER = 01/08/2007 and 0FISCVARNT = AK after query execution the variable applied displays -
<b>0FISCPER = AK/01/08/2007
0FISCVARNT = #</b>.
It works fine on 3.5 templates.We are on SP9.We have a sandbox also and i tested it out in sandbox and have no problem there.
Is anyone facing the same issue?
Regards,
Shiva

Not much experience in WAD but I think there should be a query in BEx Query Designer.
There you can choose that characteristics which takes time. Select "Advanced" tab from right hand side.
Under "Filter Value Selection During Query Execution" you will get 4 options.
BTW if you have a query on DSO then creating index ( secondary) on the affected characteristics would also resolve your problem
Regards
Anindya

Applying Effects After Using a Color Key to Remove Greenscreen

I want to apply an infrared effect to a character on some greenscreen footage after using keylight to remove the greenscreen. When I apply the effect, it of course effects the color key, making all the removed greenscreen come back. I'm sure there must be a way to keep the screen matte data, before the effect is added, but I haven't been able to figure out how to do this.

Some effects will overwrite the Alpha channel. In that case the procedures you choose are correct, if you want to keep the layer count low. Still, you may wish to check the layer's internal blendmode controls just to make sure. For effects like Colorama, you can also explicitly disable Alpha processing, so the source transparency remains intact. You could of course also use the Alpha Matte or Stencil Alpha modes to do the cutout using duplicates of the source layer.
Mylenium

Cannot ping SPA 8800 after provisioning with BE3000

If you are unable to ping the IP address of the SPA 8800 (when connected to a Cisco SMB switch) after it had already been provisioned with the BE3000, it is likely that you are hitting a known issue with the SPA 8800/BE3000. To resolve the issue enable CDP by doing the following
- Connect your PC directly to the Aux port on the SPA 8800. It will provide you an IP address.
- Look up the default gateway of your PC. Plug the IP into a browser and access the SPA 8800. Click on Admin User and Advanced ( Top right had corner of screen)
- Disable the TFTP provisoning for SPA 8800 (Voice-> Provisioning) and enable CDP (Network-> WAN Status-> Enable CDP).
After you save and exit, you should now be able to ping the SPA 8800. This bug is likely to be resolved in the next version of the BE3K (8.6.5).

Hi,
For Internet issue first question, is it working from directly from router?
For Internet issue couple of suggestions
1)NAT configuration is not looking fine. Please add below.
interface GigabitEthernet0/1
ip nat outside
interface GigabitEthernet0/0.20
ip nat inside
2) I hope your default route should be pointing to ISP router..So ip route 0.0.0.0 0.0.0.0 192.168.2.0 is correct? Try changing this as below
ip route 0.0.0.0 0.0.0.0 Gi0/1
Hope that helps.
Regards
Najaf
Please rate when applicable or helpful !!!

Veryfying if E-mail Noti.sent to user after provisioning a req. in CUP

Hi,
Is there any way from where i can see the e-mail log of a particlar CUP request which has got provisioned in the system.
I checked that e-mail address of requestor and user is properly mentioned in the request form,stage is also configued as required,e-mail reminder is also ok, but some users are still saying that they didn't recieved any e-mail notification of username and password.They say nothing is in junk folder too.I just want to check excatly what is happening.
Thanks,
Mukesh

Thanks Satish for telling me the table..
the points you mentioned, i have already check..
Users & Requests following to other workflows are getting provisioned and getting the Password Provisioningmails.
In troubled workflow also others mails for e.g. submission,waiting approval,approved are going but only Password Provisioning are not getting recieved.
I also checked from the above table, and found except Password Provisioning mail all other notifications entry are present.
Any idea.i am working on SP12
Rgds,
Mukesh

Apply globals after provisioning

Similar Messages

Maybe you are looking for