Apply Lens profile in Premiere Pro?

Hi,
I'm new to Prmiere Pro and video shooting, when I use DLSR to shoot videos, notice some of lights fall off and lens distortion on the wide angle lens I use.
is there anyway to apply the lens profile in Premiere Pro, like what we usually do in photoshop, lightroom and camera raw?
Thank you very much.

Lens profiles should be added to Premiere Pro. They should be ported from Photoshop to Premiere Pro and updated simultaneously.
Please submit a feature request: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
It was only in the last few years that people started using a DSLR to shoot video. It was only fairly recently that the video was worth using for any professional purpose. I was hoping that this last release would have it. But no such luck.
Now, if I could just get my Panasonic lenses added to the profiles. Lots of GH2, GH3 and GH4 users out there would benefit.

Similar Messages

  • Lens Profiles in Premiere Pro

    Ist es möglich "Lens Profiles" wie in Photoshop auch in PP zu verwenden? Sind die Files allenfalls sogar kompatibel?
    Kind Regards
    MichaelSan

    Lens Profiles ahben was mit Camera Raw zu tun. Demzufolge würden sie in Premiere nur auftauchen, wenn du ein ehntsprechendes Format öffnest...
    Mylenium

  • How come I need to render EVERY TIME I apply an effect in Premiere Pro CC?

    I am using Premiere Pro CC version 7.2.2 (33) on a 2.9 GHz Intel Core i5 iMac with 24GB of memory and an NVIDIA GeForce GTX 660M 512 MB graphics card. The footage I am importing is ProRes 422 1920x1080 square pixel 24 frames progressive footage.
    When I place clips onto the timeline, they play without any issue. In fact, they play beautifully! However, whenever I apply an effect, the clips needs to be rendered. Here's the biggest problem though, every effect needs to be rendered and I don't even need to change the settings of the effect. Just placing the effect on the clip causes a red line to appear above my clip.
    Help!?

    Kevin,
    They do play back. They don't become labored or jerky until I begin taxing the GPU with stacked or complex effects. John T Smith was right on about the hardware deficiency and your insight into my FCP past and red render lines completed the answer for me.
    It looks like I'm now in the market for a hardware upgrade.
    Thank you, both.
    Ephraim

  • Auto-will this apply lens profiles to all images in ACR when a profile exists

    I would like to know if I hit "Auto" under  the Lens Correction Tool in Adobe Camera Raw, will that then set up Adobe Camera Raw to apply a
    lens correction profile to each image that I process, when such a lens profile is available in the database?  I have read one or two threads on this topic and I am still not sure that "auto" does what I want, versus default; the situation becomes even trickier I think if you edit the settings below this tab, and want those choices to become a default. I am very confused by all the various "if you do this, then this will happen, but not if you set these to other choices, and so on".
    Perhaps "Default" does what I want to have done? In any event, I would like to know which setting will do as above and apply a lens correction profile every time that one is available.
    Thanks, Debra

    Yes, if a profile can be found that matches, it will be applied, at 100% for all three sliders.
    Conversely, if you for instance don't want your fisheye to be defished, you open an image taken with that lens, move the distortion slider to 0%, and save that as a new default. Now, "Auto" would put the distortion slider at 100% while Default will leave it at 0%.
    If you don't make any changes to the standard settings and don't save any new defaults, they are both identical.
    Hope this makes sense.

  • Apply timecode effect to Premiere Pro project

    Hello,
    I've been trying to apply a timecode effect to my Premiere Pro (5.5) project, but despite all my attempts, I can't see the timecode on the monitor when I apply it.
    Apparently, I am doing everything correctly: creating a black video or a transparent video file and applying the 'timecode' effect over it, so I don't understand why it is not visible... Has anybody ever had a similar problem?
    I am attaching a photo of the problem...
    Thanks in advance!

    Wrong forum. This is the hardware forum for hardware related topics.

  • Apply lens profile correction on import?

    Am I alone in wanting the option
    to apply automatic lens profile correction upon import?

    You can either use Develop preset on import, or create a custom camera default. I do the latter. For example, all my imported 5D images have lens corrections enabled by default.

  • How to apply lens correction profile to multiple images at once?

    I have a quick newbie question and I couldn't find an answer in a brief search that I did. Is it possible to apply lens correction profile automatically to multiple images at once? For my RAW images, LR automatically detects the lens and applies the correction profile for an image if I manually click on "Enable lens correction" option under Develop module (in the right pane where adjustments are made). However, I would like to do this to multiple images all at once.
    Thanks,
    Osho

    Be careful using develop setting synchronization for lens profile across mutiple images! This allows applying an incorrect profile (i.e. Canon 17-40mm profile with synchronization to images shot with multiple lenses) First use the 'filter' tool to make sure you select images shot with only one (1) lens type. Then follow one of the procedures here:
    http://help.adobe.com/en_US/Lightroom/3.0/Using/WS0E6E6886-E223-4050-B6E0-A97B5B62EF7D.htm l
    You can also change the "default" develop settings with 'Lens Profile' option checked and then save as the "new default" setting. LR will then "automatically" apply lens profile correction on import of new images.

  • Does Camera Raw apply tangential corrections computed by Adobe Lens Profile Creator?

    Dear Adobe,
    I have noticed that even if ALPC calculates tangential distortion parameters, camera raw does not apply any tangential correction to the images. This can be easily proved by manually changing the values of the two tangential distortion parameters in the *.lcp file. Nothing changes to the images even exagerating the values. Varying the other parameters such as radial distortion parameters and principal point location (image center) results in evident changes in the images. I am interested in using camera raw to correct the images from ditortions for scientific purposes. It would be very helpful for me if you could help me.
    Thank you in advance,
    Fabio

    PSE does not have the user-interface to turn on lens-corrections, nor does the ACR 6.1 update for PSE contain the lens-profile database installer, so if PSE is the only member of the PS-family that you have installed then effectively you cannot apply lens profiles.
    If a computer has the lens-profile database installed and lens-distortion-correction has been enabled in the XMP sidecar for a particular image, both requiring PS-CS5's ACR 6.1-updater or LR3 to be installed and one of those used to enable lens-corrections for the image, then PSE can use ACR 6.1 to apply a lens profile, because the version of the ACR 6.1 plug-in for PS and PSE is the same plug-in.
    BTW, removing fish-eye distortion completely, which is what enabling lens-corrections does by default, will leave a rather poor looking image that has been completely rectilinearized but has severe stretching of the pixels at the edges, so only the center is useable.  With my 8mm Sigma fisheye, I reduce the Distortion part of the correction down to 44 so the black corners are gone, but there is still some bulging of the image.
    If you want to experiment with lens-corrections, you could install the 30-day trial of LR3.

  • Photoshop Camera Raw to Premiere Pro

    I've gotten used to processing still images in Photoshop's Camera Raw converter.  Is there any way to export/copy the settings from the Photoshop raw converter to apply to footage in Premiere Pro (or through Speed Grade and then to Premiere Pro)?
    If not, is there at least any way to set a camera profile to footage in Premiere Pro?
    Thanks,
    JB

    Geez! Make me work for it.
    I found it on the second try so you are forgiven.
    http://tv.adobe.com/watch/learn-speedgrade-cc/using-snapshot-browser-to-compare-shots/
    I said it was a good idea. Obviously Adobe thought so to. Nice.
    Works for me!

  • Does the Lens Profile Creator work with Photoshop Elements 8.0..?

    Hello,
    I am very new to the world of Photoshop, so please forgive if this is an obvious/stupid question...
    I am using Photoshop Elements 8.0 and I have a couple of pictures that I need to remove the 'fish eye' lens distortion from around the edges...
    The blurb for the Lens Profile Creator says that it is for use in the "Adobe Photoshop® family of products"...
    Does this include Photoshop Elements 8.0 or do they really mean it is just for Photoshop CS5, Camera Raw and Photoshop Lightroom...
    Any help will be appreciated...
    Many Thanks
    mc1903uk

    PSE does not have the user-interface to turn on lens-corrections, nor does the ACR 6.1 update for PSE contain the lens-profile database installer, so if PSE is the only member of the PS-family that you have installed then effectively you cannot apply lens profiles.
    If a computer has the lens-profile database installed and lens-distortion-correction has been enabled in the XMP sidecar for a particular image, both requiring PS-CS5's ACR 6.1-updater or LR3 to be installed and one of those used to enable lens-corrections for the image, then PSE can use ACR 6.1 to apply a lens profile, because the version of the ACR 6.1 plug-in for PS and PSE is the same plug-in.
    BTW, removing fish-eye distortion completely, which is what enabling lens-corrections does by default, will leave a rather poor looking image that has been completely rectilinearized but has severe stretching of the pixels at the edges, so only the center is useable.  With my 8mm Sigma fisheye, I reduce the Distortion part of the correction down to 44 so the black corners are gone, but there is still some bulging of the image.
    If you want to experiment with lens-corrections, you could install the 30-day trial of LR3.

  • Looking for D7000 and Tokina 11-16mm Lens Profile

    I would think by now someone would have posted this lens profile but I can't find it for the life of me, sorry. I am sure this has been discussed to death but I have downloaded the lens profile creator (haven't figured out how to use it yet) and the Adobe Lens Profile Downloader (doesn't seem to have any third party lens data for the D7000). Any help would be great.
    On a side note I am also looking for a lens profile for the Pro-Optic 8mm f/3.5 fisheye, which I knew would be even harder to find, but if anyone has either of those I would greatly appreciate a link to download the profile. Thanks, Scott

    There are only Nikon brand lenses in the dB, nothing from Tokina, and nothing for the 11-16mm.
    ~~~~~~~~~~~~~~~
    Scott Fillmer | Sent via iPhone
    http://www.scottfillmer.com
    cell / text 334-787-9317

  • GoPro Camera Raw Lens Profile settings not working for image sequence in Photoshop/AE/Premiere CS6

    Hey Everyone,
    I'm in need of assistance in either Photoshop CS6, After Effects CS6, or Premiere Pro CS6.  I just installed the trials after seeing Russell Brown demo the GoPro Lens Profile correction feature in Camera Raw.  Basically what I'm looking to do is make adjustments (in Adobe Camera Raw) to a series of still images (shot with the time-lapse mode on the GoPro) and then either export those stills through Photoshop or Bridge to a temporary movie file that will be imported into a timeline (with other video clips), or import the JPG files (with Camera Raw settings) directly into After Effects or Premiere as an image sequence.  The latter would be preferable as it'd avoid the extra step of having to render the intermediate/temporary movie file.
    Right now, my current workflow for GoPro time-lapses is:
              - use Bridge CS4 to do basic color correction on the still images
              - save those as TIF files
              - run the TIF files through a custom script to have Hugin 2012.0.0 (open source pano stitcher) remove the fisheye distortion
              - open the new TIF image sequence into QuickTime Player 7 (Pro)
              - export the image sequence as a QuickTime movie file
              - import the movie file into Premiere Elements 10 to place on a timeline with other video clips (as Premiere Elements can't handle the sequence(s) of thousands of still images without crashing)
    If I can go directly from Bridge to a timeline, it'd save a lot of processing time (and it'd be much nicer to preview the images in Bridge without the fisheye distortion)!
    I can prepare the GoPro JPG files through Adobe Camera Raw in Bridge CS6, though when I go to import the JPEG image sequence into Premiere Pro CS6 or After Effects CS6, none of the Camera Raw settings are applied.  If I export the Camera Raw files in Bridge CS6 as DNG files (a step I'd really prefer to avoid) and then import the DNG image sequence into After Effects CS6, the Camera Raw settings are applied except for the Lens Profile settings -- I can pick other cameras but not the GoPro lens profiles when the DNG image sequence loads in After Effects.  It also appears that once I open the DNG files in After Effects CS6, I can no longer access the GoPro Lens Profile in Adobe Bridge CS6 -- the list changes to the same list I get in After Effects.  Premiere Pro CS6 doesn't let me import the DNG files at all.  I've also tried to import the JPG files (as well as the converted DNG files) into an image sequence in Photoshop CS6, though it doesn't allow me to do so (the Image Sequence checkbox is grayed out after I apply the Camera Raw settings in Bridge).
    There could be an issue going on with different Camera Raw versions.  I didn't have Premiere Pro CS6 installed during my initial testing, though now do notice that the Camera Raw dialog in Bridge CS6 only lets me choose compatibility up to "Camera Raw 7.1 and later" when I choose to export the files as DNG.  I thought Camera Raw 8.2 was an option there a couple days ago when I only had installed Photoshop CS6 and After Effects CS6 (though am not 100% certain).
    Please let me know if there is some workaround to get the GoPro lens profile Camera Raw corrections applied in an image sequence in one of the Adobe CS6 products (without having to export the files as temporary TIF or JPG files out of Camera Raw).  I'd greatly prefer to shorten my current workflow for these files.  (I just updated the CS6 trials and have tested all three programs again though I still get the same results described above.)
    Does Lightroom 5 have any option to export Camera Raw image sequences as movie files (or any other feature that might help in simplifying my current workflow)?  I can't install the trial right now as it's not compatible with OS X 10.6.8.  I'd consider upgrading OS X if I knew Lightroom 5 would do what I need, though am waiting for any potential color profile issues to be resolved in OS X 10.9.
    I can open the image sequence in Photoshop CS6 if no Camera Raw settings are applied and then use the Lens Correction Filter to apply the GoPro Lens Profile settings, though I really prefer the Camera Raw interface in Bridge for tweaking image settings.  As soon as I apply Camera Raw settings to the first image, Photoshop CS6 grays out the image sequence checkbox.
    If there isn't a way to take Camera Raw files straight from Adobe Bridge to a timeline, I may stick with my current workflow using CS4 and see what I can do to better automate some of the steps as the TIF export in Bridge, fisheye distortion removal in Hugin, and render in QuickTime Player all take quite a while.  I won't mind waiting for all the processing if I can set it and check back on it in later the next day when it's fully complete.  Is there a way to have Adobe ExtendScript execute an external shell command (i.e.: a command I could type into the bash shell in Terminal in OS X)?  If not, is there a way to call/run an ExtendScript script from the command line and pass a parameter to it that my custom script could use?
    Thanks in advance,
    Mark

    Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

  • Adobe Premiere Pro CC for mac - Lens Distortion

    I do not have lens distortion option in video effects. Apparently this is not included in mac version of Premiere Pro CC. Where can I get this plugin? Or is there another way of doing this? Any help would be hugely appreciated. Thanks.

    Take your Time Machine and rewind your system to before you installed CC. Problem solved. Specifically, rewind your HD/Library/Application Support/Adobe and user/Library/Application Support/Adobe folders and see if that fixes it.  It fixed a wonky AE CS6 I had earlier this week (completely unrelated to CC)
    Keep with CS6 until the first updates to CC roll out.
    (And don't ever upgrade a critical app mid-project. I know you know that's a huge professional no-no. You had a system that worked just fine.)

  • When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

    When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

    First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
    A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
    Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
    Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
    Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

  • Create Smart Collection for Photos Without Lens Profile Applied?

    The subject pretty much says it all. Is there any way to create a smart collection of photos that have not had lens profile corrections applied?

    Sadly, it's not possible using the options avilable within Lr's Smart Collection dialog. However, some third party plugins might be able to do it, although I'm not aware of any.

Maybe you are looking for