Apply my own formula when user presses sum button in a report

Hi all,
I have this requirement that when user presses SUM button for a particular field in a report instead of Summing it up and displaying I can apply my own formula and display its value. 
For Ex :  When we press sum button for field efficiency :
EFFICIENCY
10
11
05
26 - It would sum it up and display 26 , where as i don't want it to display 26 i want to apply a separate formula and display that value

Suggest to add another custom button to the ALV toolbar and write the desired logic you want.
Also to avoid confusion, disable the standard summation button. (you can add the same icon for the custom button if you wish)
Thanks,

Similar Messages

  • At selection-screen when user presses back button

    Experts,
    I have two radio buttons and two relative checkboxes ( one checkbox related to other ).
    Now when user selects one radio button and executes teh program, there is a summary page. When user presses back button from there, I return to the selection screen, however the selections are still there.
    Ideally I want a blank screen, as in nothing selected( similar screen when program is executed first ). Is it possible ?
    Kindly advise,
    Gols

    Hi,
    Try clearing radio buttons and check boxes at PBO of selection screen using AT SELECTION-SCREEN OUTPUT statement.
    PARAMETERS:
      p_rad1 TYPE c RADIOBUTTON GROUP rd1,
      p_rad2 TYPE c RADIOBUTTON GROUP rd1.
    PARAMETERS:
      p_chk1 TYPE c AS CHECKBOX,
      p_chk2 TYPE c AS CHECKBOX.
    AT SELECTION-SCREEN OUTPUT.
      CLEAR: p_rad1, p_rad2, p_chk1, p_chk2.
    Hope this helps.
    Regards,
    txhughes

  • How to show old value in webui when user press NO button on popup button.

    Hi Experts,
    As per requirement I have created custom field with dropbox and with popup box to cofirm user decision if value from field changes.
    Now on Popup when user press Yes then its Ok as no need to change the current value in the field.
    but when user press the NO button I want to display the old value on Web UI so now I am able to catch the old value and pass it into the field at backend but I am not able to make the change on the web page.
    Please reply if anyone have solution for it.
    BR
    Gaurav    

    Hi Gaurav,
    First of all when all this is happening in UI why you need to pass the selected value to backend. I didnt get this.
    I believe, this is only ui related and the old value which you got can be set in the IMPL class global variable and  trigger method set_on_close_event, say here 'CONFIRM_POPUP_CLOSED' as shown below:
      gr_popup->set_on_close_event( iv_event_name = 'CONFIRM_POPUP_CLOSED'
                                        iv_view = me ).
    Retrive the answer as per selection from popup in method 'CONFIRM_POPUP_CLOSED'
    by using:
      lv_answer = gr_popup->get_fired_outbound_plug( ).
    if lv_answer is NO, then put back the globally stored old value back to dropdown attribute, using:
    set_property_by_value method(   iv_attr_name = 'dropdown attr' iv_value = 'old value' )
    Thats it. No need to do anything.
    Regards,
    Bhushan

  • Triggering POPUP to SAVE when user Presses BACK  Button

    h4.
    Hi Friends,
    h4.
    When the User Presses BACK Button in the PF Status, it should trigger POPUP_TO_CONFIRM  whether to SAVE or not.
    h4.
    Suppose if the user doesn't change any thing in the Screen, it should not ask the User.
    h4.
    How can i know whether the user changes something in the Screen.
    h4.
    Screen mean Table Control..
    h4.
    How can i track this.
    h4.
    Regards:.
    h4.
    Sridhar.J

    Hi Sridhar,
    Within the table control loop, create a chain of all the fields in the structure of line type. call a PAI module with addition ON CHAIN-REQUEST. This is a conditional module call which will be triggered ONLY when user changes something on the screen. In this module you can set a global variable DATA_CHANGED to say 'X'. When user chooses BACK function, check this global variable to decide on the confirmation popup.
    One small caution. If you have the ROW SELECTION field also included in the line type of your internal table associated with the table control, you need to exclude that from the CHAIN of fields above; otherwise even when user selects a line or de-selects, this module will be triggered.
    Read ON CHAIN-REQUEST and ON REQUEST online ABAP help for more clarity.
    Regards
    Suresh
    Edited by: Suresh Radhakrishnan on Sep 28, 2009 4:29 PM

  • Preventing app exiting when user presses cross button

    Hello,
    I can't seem to prevent the whole application closing down when the user presses the cross button at the top of any of the forms. For example I have a menu form which I want to keep running whilst the user closes other forms which are shown from it.
    Any suggestions?
    Thankyou,
    Karsten

    I could be wrong, but I thought that the default
    behavior of a JDialog is to not close the whole app
    when it closes. Is that not correct?You are correct, sir. The only way an application closes is by explicitly telling it to do so by EXIT_ON_CLOSE.

  • Flatten or Lock a fillable pdf when user presses submit button

    Hi.  I've been searching all over the net trying to figure this out.  I have a form that I created in LiveCycle and in the form I inserted a "REGULAR" button, with the following script:
    //Create a variable to hold the document object
    var 
    oDoc = event.target;oDoc.mailDoc({
    bUI
    : true,
    cTo
    : "[email protected]",
    cSubject
    : "New Procedure - Operator "+TextField1.rawValue+" - ID "+TextField2.rawValue,
    cMsg
    : "Attached is the New Procedure form for Operator "+TextField1.rawValue+" - ID "+TextField2.rawValue+".",
    This script is emailing to "[email protected]" and populating the subject line and body of the message with some text and some items from fields in the PDF.
    I want to have the PDF locked or flattened when the user hits the submit button, to ensure that the information put in the PDF isn't altered after they submit it.  I cannot find any way of doing this easily.  I found a script that will flatten the message (below), but I don't know how to add it to the email script I have noted above.  I don't want to add a second button to the form as I want to keep it as simple as possible for the user.
    Any suggestions someone might have would be greatly appreciated.  Thank you.
    Ryan

    The link at the bottom of the blog post takes you to Acrobat.com where you can download the file.
    Just tested it, the lin k is working fine for me.

  • When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

    When the user press the button Calculate Tax  and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
    All setup looks fine.
    Please let me know what can be done on this?
    Regards,
    Peu

    HarryAustralia wrote:
    I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
    The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
    That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
    You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
    Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

  • Want to close  JInternalFrame when user press OR release "Esc" key.

    i want to close JInternalFrame when user press OR release "Esc" key.
    i am trying that
    but nothing print on console
    public class IFTest extends javax.swing.JInternalFrame {
        public IFTest() {
            initComponents();
        private void initComponents() {
            setClosable(true);
            addKeyListener(new java.awt.event.KeyAdapter() {
                public void keyPressed(java.awt.event.KeyEvent evt) {
                    formKeyPressed(evt);
                public void keyReleased(java.awt.event.KeyEvent evt) {
                    formKeyReleased(evt);
                public void keyTyped(java.awt.event.KeyEvent evt) {
                    formKeyTyped(evt);
            javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());
            getContentPane().setLayout(layout);
            layout.setHorizontalGroup(
                layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGap(0, 394, Short.MAX_VALUE)
            layout.setVerticalGroup(
                layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGap(0, 278, Short.MAX_VALUE)
            pack();
        private void formKeyPressed(java.awt.event.KeyEvent evt) {
            System.out.println("formKeyPressed");
        private void formKeyReleased(java.awt.event.KeyEvent evt) {
           System.out.println("formKeyReleased");
        private void formKeyTyped(java.awt.event.KeyEvent evt) {
           System.out.println("formKeyTyped");
    }

    i don ti thanks
    public class IFTest extends javax.swing.JInternalFrame {
        public IFTest() {
            initComponents();
             this.getActionMap().put("test", new AbstractAction(){
                public void actionPerformed(ActionEvent e) {
                    System.out.println("Escape Pressed");
            InputMap map = this.getInputMap(WHEN_ANCESTOR_OF_FOCUSED_COMPONENT);
            KeyStroke stroke = KeyStroke.getKeyStroke(KeyEvent.VK_ESCAPE, 0);
            map.put(stroke,"test");
        private void initComponents() {
            setClosable(true);
            addKeyListener(new java.awt.event.KeyAdapter() {
                public void keyPressed(java.awt.event.KeyEvent evt) {
                    formKeyPressed(evt);
                public void keyReleased(java.awt.event.KeyEvent evt) {
                    formKeyReleased(evt);
                public void keyTyped(java.awt.event.KeyEvent evt) {
                    formKeyTyped(evt);
            javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());
            getContentPane().setLayout(layout);
            layout.setHorizontalGroup(
                layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGap(0, 394, Short.MAX_VALUE)
            layout.setVerticalGroup(
                layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGap(0, 278, Short.MAX_VALUE)
            pack();
        private void formKeyPressed(java.awt.event.KeyEvent evt) {
            System.out.println("formKeyPressed");
        private void formKeyReleased(java.awt.event.KeyEvent evt) {
           System.out.println("formKeyReleased");
        private void formKeyTyped(java.awt.event.KeyEvent evt) {
           System.out.println("formKeyTyped");
    }

  • I dont want to commit master-detail form untill user press save button

    We have department-employee kind of master detail form.
    1) We click on any record on department block.
    2) Then we change / insert /delete record in employee block.
    3) then we move to anothe department.
    4) now it ask for saving the changes. THIS WE DO NOT WANT.
    5) WE WANT TO SAVE CHANGES WHEN USER CLICK ON SAVE BUTTON.
    6) If user make changes to various employees of various department,
    we want user to cancel changes when ever user wants.
    IN SHORT WHAT WE WANT IS
    No record should be saved untill user press save button below.
    and If user press cancel all changes made must be undo.
    PLEASE DO NOT SUGGEST DO_COMMIT in clear block details,
    We know that and we dont want that option.
    Regards
    Upendra

    Hi URTRIVEDI
    but it gives "could not reserve record (x tries), keep trying?" error.The problem is not within the code given by Francois but in sessions u opened.
    pls make sure u r not running more than one instance of ur form with in one session.
    e.g. FireFox is opening more than one tab at a time every modification u made > compile > Generate , Save & Run only one Form instance
    Hope this helps...
    Regards,
    Amatu Allah

  • Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up allright, but the programs don't start when I press any buttons. How do I fix this problem?

    Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up alright, but the programs don't start when I press any buttons. How do I fix this problem?

    If Layers is greyed out it possibly means that you are in Quick Mode. Select 'Expert' and all the options should become available.
    Try permanently associating psd files with C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe and see if that fixes the issue. Instructions here - http://windows.microsoft.com/en-gb/windows-8/choose-programs-windows-uses-default.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Invalidate session when user clicks back button

    I want to invalidate the session when user clicks back button, so that user cannot refresh and reload a page.
    Any suggestions will be highly appreciated.
    Message was edited by:
    sam_amc

    * SessionInvalidator.java
    * Created on October 27, 2006, 9:18 AM
    package web;
    import java.io.*;
    import java.net.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    * @author javious
    * @version
    public class SessionInvalidator extends HttpServlet {
        /** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
         * @param request servlet request
         * @param response servlet response
        protected void processRequest(HttpServletRequest request, HttpServletResponse response)
        throws ServletException, IOException {
            response.setContentType("text/html;charset=UTF-8");
            PrintWriter out = response.getWriter();
            String reposted = request.getParameter("reposted");
            if("true".equals(reposted))
                HttpSession session = request.getSession(false);
                if(session == null)
                    // This is step 4 and beyond
                    out.println("<html>");
                    out.println("<head>");
                    out.println("<title>Servlet SessionInvalidator</title>");
                    out.println("</head>");
                    out.println("<body>");
                    out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
                    out.println("I said, your session is now invalid! Now where are those Duke Dollars at?");
                    out.println("</body>");
                    out.println("</html>");
                else
                    Integer hitCount = (Integer)session.getAttribute("hitCount");
                    if(hitCount == null)
                        // This is step 2 (the "good" - "stay" page.)
                        out.println("<html>");
                        out.println("<head>");
                        out.println("<title>Servlet SessionInvalidator</title>");
                        out.println("</head>");
                        out.println("<body>");
                        out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
                        out.println("Your session is good.<br>");
                        out.println("If you click the browser's back button, you will invalidate your session.");
                        out.println("</body>");
                        out.println("</html>");
                        hitCount = 1;
                        session.setAttribute("hitCount", hitCount);
                    else
                        //We've used up our good visit
                        session.invalidate();
                        // This is step 3
                        out.println("<html>");
                        out.println("<head>");
                        out.println("<title>Servlet SessionInvalidator</title>");
                        out.println("</head>");
                        out.println("<body>");
                        out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
                        out.println("Your session is now invalid");
                        out.println("</body>");
                        out.println("</html>");
            else
                // because the javascript in the following output will never allow a user
                // to continue clicking back any further than this, we can safely create the session.
                // (or perhaps the session can already be created here and this may not be necessary).
                // A problem lies where if the user chooses to "select" a page back in history they thereby
                // potentially skip back "over" this functionality, thus defeating the purpose of it.
                request.getSession(true);
                // This is step 1 (indirection)
                out.println("<html>");
                out.println("<head>");
                out.println("<title>Servlet SessionInvalidator</title>");
                out.println("</head>");
                out.println("<body onload=\"document.getElementById('invalidatorForm').submit()\">");
                out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
                out.println("<form id=\"invalidatorForm\" action=\"SessionInvalidator\" method=\"POST\">");
                out.println("<input type=\"hidden\" name=\"reposted\" value=\"true\">");
                out.println("</form>");
                out.println("</body>");
                out.println("</html>");
            out.close();
        // <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on the + sign on the left to edit the code.">
        /** Handles the HTTP <code>GET</code> method.
         * @param request servlet request
         * @param response servlet response
        protected void doGet(HttpServletRequest request, HttpServletResponse response)
        throws ServletException, IOException {
            processRequest(request, response);
        /** Handles the HTTP <code>POST</code> method.
         * @param request servlet request
         * @param response servlet response
        protected void doPost(HttpServletRequest request, HttpServletResponse response)
        throws ServletException, IOException {
            processRequest(request, response);
        /** Returns a short description of the servlet.
        public String getServletInfo() {
            return "Short description";
        // </editor-fold>
    }The problem with even attempting to do this is that with today's browser capabilities, users can optionally choose to jump to a particular page in the browser history and this may not necessarily be the most recent page. In this case, you would also want to invalidate the user's session after already having been there (whatever page that may be). Then you have situations when the user may wish to jump back in history to external pages they were visiting before they reached your own site's pages. Then what happens when they start clicking forward, forward, etc... from there? This is why I prefer writing Swing Clients as alternatives to browser applications. There are soo many possible ways break web applications made for standard web browsers both maliciously and simply by accident or irregular user patterns. Regardless, this servlet would work based on the assumption that all the user(s) would "ever" do aside from moving logically forward is clicking on the browser's "back" button.
    cheers!
    Message was edited by:
    javious

  • I want to create a vb form in which when i pressed a button then a specific song must be played.

    i want to create a vb form in which when i pressed a button then a
    specific song must be played. will u plx help me to do this..what i mean is that when i pressed that button a audio msut be played. will anyone help

    i want to create a vb form in which when i pressed a button then a specific
    song must be played. will u plx help me to do this..what i mean is that when i pressed that button a audio msut be played. will anyone help
    My.Computer.Audio.Play("C:\Users\John\Desktop\Something.Wav",
    AudioPlayMode.Background) or My.Computer.Audio.Play(My.Resources.SomeWavFileinyourresources,
    AudioPlayMode.Background) will play .Wav files only. And it will play them directly from resources without having to write them to disk to play them first.
    The
    Windows Media Player Control (can be created dynamically and not displayed) or the
    Media Player Class or a third party control that you can download called
    VLC Media Player can all play audio files based on the Codecs they use or have installed. Which would be .Wav, .MP3 and some others as well as you can download third party Codecs that can be provided to your system possibly for the Media Player class to
    use but as plugins I believe for Windows Media Player and VLC Media Player I believe for playing other types of audio and video file formats that they do not directly support with their installed codecs. Although all of these require that a file is available
    from disk or thumbdrive or CD Rom to play and can not directly play resources therefore resources must be written to disk in order to work.
    Microsoft Visual Basic language forum search results for "WindowsMediaPlayer"
    Microsoft Visual Basic language forum search results for "MediaPlayer"
    La vida loca

  • I have all my songs in my iTunes library on the computer, but when I press the button to sync it, it doesn't put the songs on my iPhone. I have songs from my iPod on here too.  How do I get it to put the songs on my iPhone?

    I have all my songs in my iTunes library on the computer, but when I press the button to sync it, it doesn't put the songs on my iPhone. I have songs from my iPod on here too. How do I get it to put the songs on my iPhone?

    Have you selected the music to sync?

  • How to open new window when i press submit button/submit button.

    Hi,
    When i press a button, I need to capture an item value in current from and I need to pass that value to another form. The child form should open in the new form.
    For that Iam using the java script, But when i use the java script my page is not able to re-size, scroll bars address bar and menu bars are missing. if any one did this kind of requirment please share with me how to solve this issue.
    Thanks

    Re: How to show Popup window in OAF on click of a button
    Thanks
    --Anil
    http://oracleanil.blogspot.com/

  • Something has happen my ipad air 2 it wont let me download or update any apps, when I press the button do update or download it looks like it is but it doesn't so if anyone knows what's going wind please help me

    Something has happen my ipad air 2 it wont let me download or update any apps, when I press the button do update or download it looks like it is but it doesn't so if anyone knows what's going wind please help me

    Do you have any restrictions for purchasing apps on the phone? Settings > General > Restrictions. If you have a Mac computer or another Apple device can you purchase things in the App Store using the same Apple ID on something else?

Maybe you are looking for

  • Family sharing - how to create a separate account?

    My son (4) has his own ipad, but I've always used my Apple ID to purchase apps for him. I'm trying to set up family sharing. Recently I read on Apple's website: Kids under 13 can have an account too. Now kids under 13 can have their own Apple IDs. As

  • Adobe Creative Cloud glitched won't allow me to download photoshop 2015

    So I had to sign up for Adobe, I did. Than I downloaded the program it told me to do, I did, it was Adobe Creative Cloud. So than I went to the page to download a free trial for photoshop. I clicked on free trial and it brought me to another page, it

  • Migrate user of group  and OU in Active Directory

    I associate my new users through the access policy in "Active diretory", so if the user belongs to the IT department, it is inserted in OU and group departmental IT. I'm having problems when I need to migrate, for example, the same user is tranferido

  • How to convert chinese letlers received from a device to understandable information?

    Hello, I would like to read from a sound level meter, I'm using VISA functions, but when I run the VI at first the information received is in chinese and I didn't find how to convert it so as to be able to read an understandable data. What can I do t

  • T500 ATI Catalyst Control Center cannot be started

    I have some troubles in opening the ATI Catalyst Control Center.There was a window poped out saying that ATI Catalyst Control Center cannot be started because the currently active GPU is not supported. I have already reinstall this drive and the grap