Apply Oracle Receivables Patch after Upgrade 5753621

Hi,
After upgrading the Oracle Apps 11.5.10.2 database to 10.2.0.3.....
do we required to apply this patch..Oracle Receivables patch...5753621..

From Patch 5753621 README file:
Abstract: ONE-OFF REQUEST ON TOP OF 11.5.9 CU2 FOR BUG 5525015
Description: Enabled Histogram for complete_flag in ra_customer_trx_all table
Patch Size: 4.8K
I have applied this patch last time I did an upgrade to 10.2.0.3 with no issues at all. The patch would create a histogram on ra_customer_trx_all.complete_flag and gather the table stats then, nothing more.

Similar Messages

How can apply Oracle BPEL patch to Oracle BPEL Process manager??

Hi, Gurus:
I am new to Oracle BPEL Process manager, I successfully install Oracle BPEL Process manager, but I need to install Oracle BPEL patch and the examples within it.
so I download bpelpatches.zip, it has over 106 MB.
It contains:
1. p4369818_101200_GENERIC.zip
2. p4343748_101200_GENERIC.zip
3. p4406640_101200_GENERIC_Patch01.zip
4. p4469111_101200_GENERIC_Patch02.zip
I am using window XP, how Can I apply these patches to my system??
How can apply Oracle BPEL patch to Oracle BPEL Process manager??
Thanks a lot!!
Charlie

don't see any invoke in your client against the intiate operation.. - which creates the correlation
only 2 of them
<invoke name="Invoke_1" partnerLink="PartnerLink_1" portType="ns1:CorrelatedBPELProcess" operation="receive1" inputVariable="Invoke_1_receive1_InputVariable"/>
<invoke name="Invoke_2" partnerLink="PartnerLink_1" portType="ns1:CorrelatedBPELProcess" operation="receive2" inputVariable="Invoke_2_receive2_InputVariable"/>
compared to this def of the process
<portType name="CorrelatedBPELProcess">
<operation name="initiate">
<input message="client:CorrelatedBPELProcessRequestMessage"/>
</operation>
<operation name="receive1">
<input message="client:CorrelatedBPELProcessRequestMessage"/>
</operation>
<operation name="receive2">
<input message="client:CorrelatedBPELProcessRequestMessage"/>
</operation>
</portType>

Applying Oracle 11g patches on Windows 2008

I'm not able to apply patches and below is the messages. Please help me. Thanks,
C:\oracle\SLM\112\OPatch> %ORACLE_HOME%\OPatch\opatch apply Z:\Oracle_Patches\12714463
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Invoking OPatch 11.2.0.1.5
Oracle Interim Patch Installer version 11.2.0.1.5
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Oracle Home       : C:\oracle\SLM\112
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.2.0.1.5
OUI version       : 11.2.0.1.0
OUI location      : C:\oracle\SLM\112\oui
Log file location : C:\oracle\SLM\112\cfgtoollogs\opatch\opatch2011-11-01_
05PM.log
Patch history file: C:\oracle\SLM\112\cfgtoollogs\opatch\opatch_history.tx
ApplySession applying interim patch '12714463' to OH 'C:\oracle\SLM\112'
Running prerequisite checks...
Patch 12714463: Optional component(s) missing : [ oracle.rdbms, 11.2.0.2.0
oracle.rdbms.dbscripts, 11.2.0.2.0 ] , [ oracle.rdbms.plsql, 11.2.0.2.0 ]
racle.ntoledb.odp_net_2, 11.2.0.2.0 ] , [ oracle.ctx, 11.2.0.2.0 ] , [ ora
bms.rsf.ic, 11.2.0.2.0 ] , [ oracle.rdbms.oci, 11.2.0.2.0 ] , [ oracle.rdb
11.2.0.2.0 ] , [ oracle.has.rsf, 11.2.0.2.0 ] , [ oracle.has.crs, 11.2.0.
, [ oracle.sysman.console.db, 11.2.0.2.0 ] , [ oracle.sysman.oms.core, 10.
3 ] , [ oracle.rdbms.dv, 11.2.0.2.0 ] , [ oracle.network.rsf, 11.2.0.2.0 ]
racle.ldap.rsf.ic, 11.2.0.2.0 ] , [ oracle.ldap.rsf, 11.2.0.2.0 ] , [ orac
olap, 11.2.0.2.0 ] , [ oracle.precomp.rsf, 11.2.0.2.0 ] , [ oracle.precomp
n, 11.2.0.2.0 ] , [ oracle.precomp.lang, 11.2.0.2.0 ] , [ oracle.rdbms.rma
2.0.2.0 ] , [ oracle.rdbms.util, 11.2.0.2.0 ] , [ oracle.odbc.ic, 11.2.0.2
[ oracle.ntoledb, 11.2.0.2.0 ] , [ oracle.nlsrtl.rsf, 11.2.0.2.0 ] , [ or
lsrtl.rsf.ic, 11.2.0.2.0 ] , [ oracle.xdk.rsf, 11.2.0.2.0 ] , [ oracle.ora
bscripts, 11.2.0.2.0 ] , [ oracle.usm.deconfig, 11.2.0.2.0 ] , [ oracle.ha
on, 11.2.0.2.0 ] , [ oracle.sdo.locator, 11.2.0.2.0 ] , [ oracle.usm, 11.2
] , [ oracle.rdbms.deconfig, 11.2.0.2.0 ] , [ oracle.has.db, 11.2.0.2.0 ]
racle.ntoramts, 11.2.0.2.0 ] , [ oracle.has.deconfig, 11.2.0.2.0 ] , [ ora
s.common.cvu, 11.2.0.2.0 ] , [ oracle.has.cvu, 11.2.0.2.0 ] , [ oracle.sys
ugin.db.main.repository, 11.2.0.2.0 ]
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 12714463: Required component(s) missing : [ oracle.rdbms.rsf, 11.2.0
ApplySession failed during prerequisite checks: Prerequisite check "CheckA
ble" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 74
Edited by: Hemanta Basuray on Nov 2, 2011 7:51 AM

Hi,
What is your exact DB release? This patch belongs to Oracle 11.2.0.2
Best regards,
Orkun Gedik

Can't install cc-patches after upgrading to windows 8.1

Hi Adobe-Team,
after upgrading to windows 8.1. I can't install updates and patches of the creative cload programms. I'm able to uninstall programms. I'm able to install programms, but i cant't patche them. Got this message: "Installation erfolgreiche, aber Fehler beim Patch (U44M1I210). I've no idea what to try further more.
Thanks for your help
Andreas

Hi Andreas,
Error Code: U44M1I210 means failed to extract the downloaded ZIP file of update.
Please follow the instructions specified on following kb doc and see if it helps -
http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
Let us know if it does not solve your problem.
Regards,

IPhone 5s not receiving iMessages after upgrading to iOS 8

After upgrading to iOS 8 my iPhone 5s is not receiving iMessages from the rest of the family. My phone shows up green instead of blue on the other phones. I have tried all kinds of resets, turning off/on iMessages, etc. Nothing has worked so far. Any suggestions will be appreciated.

Hi there eyab2010,
I have an article for you that outlines some troubleshooting steps related to this issue with Messages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Can not receive email after upgrading to 5.0.1

iPhone does not fetch the email from server automatically after upgrading to 5.0.1 . I need to use mail APP in order to get my emails. what are the possible fixes for this issue ?

Got it to work after going around in the loop for a couple of clicks

Applying NLS patches after upgrade to 12.1.3

Hi Experts,
Recently i install 12.1.1 and then upgrade it to 12.1.3.
Now i need to apply NLS patches(Canadian French and Spanish language).
On metalink i find pre-requisite of both patches and post patch are same.
The prerequisite patch for both is p8576725_12.1.0_R12_GENERIC.zip
and post patch is p6746000_R12_f.zip.
Can i apply it one by one or After applying french , i applied spanish patch ?
Can you please giude me.
Thanks
Mohammad

Hi;
Please see:
How to Add arabic language to exisitng 12.1.3
Re: How to Add arabic language to exisitng 12.1.3
Regard
Helios

IMac Facetime won't receive calls after upgrade to Mavericks

Hi all,
I am experiencing a strange issue with Facetime on my 2012 iMac running Mavericks.
Here's the deal:
Upgraded my iMac and MacBook Air to Mavericks
I am able to PLACE calls from all machines (so my account seems to be working fine)
When being called my iMac won't respond...no message, no sound, no nothing...plays dead man
My MacBook Air behaves normally (also Mavericks)
I have tried all of the following:
disabled and re-enabled Facetime (to maybe override some config issue inherited from before the upgrade)
tried to receive calls with and without Facetime running
rebooted...several times
all the latest updates are installed
I have not (knowingly) changed anything after the upgrade. "Don't disturb" is off and Facetime calls are allowed for everyone.
Any ideas?
Best regards,
Beschi

Hi all, Problem not solved yet.
Maybe you can give your 2 cents to my working hypothesis:
Could it be that some background process/service is used to continuously monitor incoming requests/calls? Could it be that this process fires up Facetime and forwards incoming calls (Facetime calls are received without Facetime running, right? So something must capture them...)? Could it be that in my case this process is either not running or configured incorrectly (account, password)?
Maybe you can put me on the right track?!
Best regards,
Frustrated Beschi

Can not login to Oracle Application Express after upgrade to 3.2

I installed oracle database express and then I upgrade APEX to 3.2 on it. I got the login page but I can not login by using any account, like SYS, SYSTEM. From the document, internal ADMIN account should exist but I did not see it from dba_users table.
Thanks,
Julie

HI Don,
I did run apxchpwd.sql to change the Application Express ADMIN user password. Then I invoked http://mymachine:8080/apex and got the Application Express login page. I put ADMIN in workspace and ADMIN in Username and the new password. But I still cannot login. I also tried http://mymachine:8080/apex/apex_admin page login. I typed ADMIN as username and the new password. Then I clicked on Login button. Nothing happened. No error message.
Any idea?
By the way, what does apxxepwd.sql do?
Thanks,
Julie

Cannot receive faxes after upgrading to 10.5.8

Since upgrading, I cannot receive faxes on either powerbook. Sending works fine.

I too am having this problem under 10.5.8
Apple would appear to not know about it because they will only provide help under a warranty, Applecare or on an incident subscription basis.
Forget the Apple help documentaion. It just suggests that you reinstall the System software. That doe not help. Been there, done that. Further documentation suggests contacting Smith Micro, the purveyors of Fax Stf. They had me look in the Applications folder to see if FaxStf was lurking there. It is not. SM say the last time that they supplied Fax software was as part of Jaguar.
You can purchase Stf from Smith Micro for $49.00 $20.00 if you have a registered earlier version. That would have the benefit of tech support and full fax controlling options. smithmicro.com

My iphone 6 stopped receiving calls after upgrading to ios 8.2

I have a new iPhone 6, 64 GB. I tried upgrading it 2 days ago to iOS 8.2.
The first time it froze for a long time and when it started, everything seemed
to be ok until I opened my messages, the screen froze then my messages opened a
blank page, then went opened a new message window, and I couldn't do anything
after, except close the messages. then I found out that my phone does not ring
when someone is trying to call me, so I tried calling my phone from a land line
and it shows it is ringing, but my iPhone 6 is not and does not show any
activity. it like its ringing somewhere else. I tried restoring it, and again
it did the same thing, the minute I open my messages. its like it triggers a
malfunction that crashes the hand set.
Has anyone experienced this, and is there a solution other than waiting for
the next update that will hopefully fix this problem?

Hello RayGas,
It may help to force close all apps and reset your iPhone.
Force an app to close in iOS
http://support.apple.com/en-us/HT5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/en-us/HT1430
If you're still not seeing any indication of incoming calls and Messages isnot functioning as expected, the next step would be to reinstall iOS on your device by placing it in Recovery Mode, then choosing Update in iTunes.
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
https://support.apple.com/en-us/HT201412
Cheers,
Allen

TB 24.2; Mac 10.6.8; send & receive problem after upgrade - must click either TWICE or doesen't work. WHY? How to fix?

I used TB 2 for years with no problems. Got stupid one day and upgraded to 24.2 on Mac OS 10.6.8.
Now when I click send I get an error message. After dismissing the error clicking send a second time sends the email normally.
The other half of the problem is Get Mail. Click it once and nothing happens except the little line on the bottom comes up connecting to .. . but it doesn't connect. Click Get Mail a second time and it works normally.
I have a new Mac (Maverick) and TB 24.2 doesn't have this problem on the new machine.

Anti virus?
And what is the error message? Mind reading I leave for the television people.

Mail does not receive messages after upgrade to Yosemite

Just upgraded to Yosemite. Mail will send but will not receive messages.
Anybody else have this issue?

Mail troubleshooting - Yosemite
Troubleshooting Apple Mail
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

Oracle Security Patch Error while applying --The filename, directory name,

Hello,
I am running into strange error while applying Oracle Security Patch 68 by using Opatch.
Supposedly, All the environment variables are set properly.
ACTIVE_STATE_PERL=true
DBMS_TYPE=ORA
dbs_ora_tnsname=YBQ
JAVA_HOME=C:\jdk1.3.1_10
OPATCH_DEBUG=TRUE
ORACLE_HOME=E:\oracle\ora92
ORACLE_SID=YBQ
Path=E:\oracle\OPatch;C:\jdk1.3.1_10\bin;E:\oracle\Perl\bin;E:\oracle\ora92\jre\1.4.2\bin\client;E:\oracle\ora92\jre\1.4.2\bin;E:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\Common Files\VERITAS Shared;\NetBackup\bin;C:\Program Files\Windows Resource Kits\Tools\;C:\Program Files\Support Tools\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;E:\usr\sap\YBQ\SYS\exe\run
Installed Active Perl. latest version
downloaded Opatch 1.0.0.50
and the patch number 3738339
I went to that directory and run the command :
perl opatch.pl apply
It started of well.
OPatch version is: 1.0.0.0.50
Using ORACLE_HOME/oui to look up oui libs...
Oracle Home = E:\oracle\ora92
Location of Oracle Inventory = E:\oracle\ora92\inventory
Oracle Universal Installer shared library = E:\oracle\ora92\oui\lib\win32\oraInstaller.dll
Path to Java = "E:\oracle\ora92\jre\1.4.2\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = E:\oracle\ora92\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
find under OH/oui/jlib
found OraInstaller.jar
Checking if this is a RAC system...
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
System Command: ""E:\oracle\ora92\jre\1.4.2\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -DTRACING.ENABLED=TRUE -DTRACING.LEVEL=2 -Dopatch.debug=true -classpath "E:\oracle\ora92\oui\jlib\OraInstaller.jar;E:\oracle\ora92\oui\jlib\srvm.jar;jlib\opatch.jar;E:\oracle\ora92\oui\jlib\xmlparserv2.jar;E:\oracle\ora92\oui\jlib\share.jar;.:E:\oracle\ora92\jlib\srvm.jar" opatch/O2O "e:\oracle\ora92" "E:\oracle\ora92\oui" opatch.pl 1.0.0.0.50"
Result:
----- DEBUG is ON -------
oracle.installer.startup_location will be set to E:\oracle\ora92\oui
oracle.installer.oui_loc will be set to E:\oracle\ora92\oui
oracle.installer.scratchPath will be set to /tmp
opatch.local_node_only is OFF
retryOption is ON: 10
delayOption is ON: 30
Few more stuff here .. not pasting the entire contents
System Command: ""E:\oracle\ora92\jre\1.4.2\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -DTRACING.ENABLED=TRUE -DTRACING.LEVEL=2 -Dopatch.debug=true -classpath "E:\oracle\ora92\oui\jlib\OraInstaller.jar;E:\oracle\ora92\oui\jlib\srvm.jar;jlib\opatch.jar;E:\oracle\ora92\oui\jlib\xmlparserv2.jar;E:\oracle\ora92\oui\jlib\share.jar;." opatch/CheckConflict "E:\oracle\ora92\oui" "e:\oracle\ora92" opatch.pl 1.0.0.0.50 3738339 "3741539 3528282 3516951 3622875 3668572 3371796 3239873 3356103 3543125 3666502 2800494 2824035 2964252 3617042 3320622 3571233 3253770 3492040 3566469 3354470 3625370 3583686 3150750 3617519 3635177 3597640 3749394 3542588 3698501 2954891 2918138 3559212 3518909 3412818 3430832 3172282 3358490 3637624 3458446 3179637 2810394 3668224 3609791 3566813 3475932 2338704 3412136 3388633 3540576 3571226 3575743 2690205 3240280 3509265 3177513 3575747 3811906 3554319 3752406 3323435 " E:\3738339\etc\config\actions"
Result:
opatch.pl version: 1.0.0.0.50
Copyright (c) 2001-2004 Oracle Corporation. All Rights Reserved.
The filename, directory name, or volume label syntax is incorrect.
Error in executing Java program to check conflict
ERROR: OPatch failed during pre-reqs check.
Now there is no problem with executing the last java program in the same prompt by removing the first and the last double quote "
Please advise.
Thanks in advance.

hi somnath,
this is the portal content management forum. for your database question please use the database forums:
http://forums.oracle.com/forums/index.jsp?cat=18
thanks,
christian

Sqlplus not execute after oracle SCN patch

HI Experts,
Recently we applied Oracle SCN patch on one of our databases and restarted the database.
Later while giving sqlplus command at server level its throwing below error..
chokcu1:/home/adm1$sqlplus /nolog
ksh: sqlplus: cannot execute
chokcu1:/home/adm1$
I am getting Permission Denied exception on the below files..
-rw-r--r-- 1 oracle dba 1427176 Mar 4 2008 libsqlplus0.so
-rw-r--r-- 1 oracle dba 2112904 Feb 25 16:21 libsqlplus.a
-rwxr-x--- 1 oracle dba 1419192 Feb 25 16:21 libsqlplus.so
Please let us know what action i need to take to resolve ksh: sqlplus: cannot execute error

user11175946 wrote:
HI Experts,
Recently we applied Oracle SCN patch on one of our databases and restarted the database.
Later while giving sqlplus command at server level its throwing below error..
chokcu1:/home/adm1$sqlplus /nolog
ksh: sqlplus: cannot execute
chokcu1:/home/adm1$
I am getting Permission Denied exception on the below files..
-rw-r--r-- 1 oracle dba 1427176 Mar 4 2008 libsqlplus0.so
-rw-r--r-- 1 oracle dba 2112904 Feb 25 16:21 libsqlplus.a
-rwxr-x--- 1 oracle dba 1419192 Feb 25 16:21 libsqlplus.so
Please let us know what action i need to take to resolve ksh: sqlplus: cannot execute errorpost results from following OS commands
id
env | sort
which sqlplus

Apply Oracle Receivables Patch after Upgrade 5753621

Similar Messages

Maybe you are looking for