Apply same crop across clips

Hi,
Can someone explain how I can apply the same crop across clips - I want to re-frame my whole film. When I select all the clips in the timeline then apply my crop in the canvas, it only crops the first clip in the timeline.
As I used a tripod I want to apply exactly the same crop on all my clips in the timeline.
Thanks in advance for your help,
Dan

Scale and position the image the way you want it. Copy it. Select the other clips and use Paste Attributes Opt-V and apply the basic motion that you changed.

Similar Messages

How can I apply the same crop to multiple photos?

It is easy to apply the same Adjust settings to multiple photos by using the Copy and Paste in the Adjust pane. Or by using iPhoto Batch Enhancer.
But can you apply the same crop to multiple photos? I don't see any way to copy a crop. iPhoto Batch Enhancer can do something like it but, being an external editor, it does so on a copy of the photo. I want it on the original photo. (Well, it's not really the original since that one is saved separately in the Library but on the current version).
Thanks for any suggestion.
Bo

Here's how:
1 - bring up the first photo in the edit window and click on the Crop button or *use the "C" key on the keyboard*.
2 - set the crop size/ratio in the menu and position the crop window over the photo as needed.
3 - click the Apply button or *use the Enter key*.
4 - click on the right arrow in iPhoto or *use the right arrow key on the keyboard* to bring up the next photo.
5 - click the "C" key to bring up the crop function.
6 - repeat steps 2 thru 5 for each photo.
This video screenshot shows how:
Click to view video screenshot
Happy Holidays

Applying same transition to many clips

You are probably going to be sick of my questions soon.
How do I apply the same transition to all of the clips I have entered. I cannot imagine that I have to place each on individually. In my old program there was a botton to "ripple transition" which applied it to every clip. Can I do that in FCE somehow????
Thanks again!!!

Hi(Bonjour)!
As filters, you can double-click on any transition from browser to open the settings. Tweak them as you want and drag the transition (or filter) in favorite folder (in browser).
Now you can apply this "custom" transition (or filter) strait from browser by dragging it into the timeline.
You can also tweak a first transition (settings, duration, etc) in timeline, and option-drag it over all other transitions applied in timeline.
Finally, if you want to add the default transition between all clips in timeline, simply put the playhead before the first clip, select all clips in timeline and drag them into canvas over the edit overlay on overwrite with transition selected.
Michel Boissonneault

Applying Same EQ Ajustiment to Another Sound Clip -- Please Help

I have been working with the Gain and Channel EQ's on a sound clip to raise audio levels and adjust sound levels, etc. How can I apply the same adjustment I created on a clip to a different audio clip (that follows immediately after for the same sound, etc.) I know there is a simple way to do this...but I don't know how.
Please let me know.
Thanks.

If the different clip is in the same environment and same type of sound as the first, you could just create a preset with your settings and apply it, or if you're in a multi-track project, group these clips together on one track and put the EQ on the entire track.
If the different clip is not in the same environment and you are trying to get them to match, you could try EQ matching in the processing menu. Take a snapshot of your EQ curve, apply to the 2nd clip. Haven't tried it myself, but give it a go.

I'm trying to crop individual frames. Can this be done without the crop being applied to the entire clip? Using imovie 11

I'm trying to crop individual frames. Can this be done without the crop being applied to the entire clip? Using imovie 11

use the cmd-B(lade) command to split your single clip into individual ones

How to crop video clips in elements 13

how to crop video clips in elements 13?

SKY KING
See fx Effects/Transform/Crop
Drag the Crop effect into your Expert workspace Timeline clip and edit the Crop effect in
Applied Effects Tab
Applied Effects Palette
Crop panel expanded
Please let us know if you are OK with the above information. If any questions or need clarification, please ask.
Thank you.
ATR

Why is the SmoothCam (smooth cam) filter not applying to an exported clip?

I have a clip that required some masking (which my graphics guy did on his PC). After importing the masked clip into FCP, I can't get the SmoothCam filter to apply to it. SmoothCam works great on the original shot from the camera (an MXF file), but not on the clip after it was "tweaked outside" of FCP.
Does anyone know if SmoothCam has a limitation on what types of files it will work on (ie only raw footage files, MXF files, etc) or is there perhaps some metadata in the raw file that's needed for SmoothCam?
We had tried exporting a smoothed version before I gave it to him for masking but he couldn't open it on his PC (don't get me started on that! haha).
He did a wonderful job on the masking (using AfterEffects) but the clip still requires the SmoothCam. And SmoothCam is working just fine (I can still apply it on "raw" clips). But when I try to apply it to this "outside exported" clip, it just doesn't do anything...no error, no indication of analyzing the clip or even trying, nothing at all happens.

I apologize. I posted this question a little prematurely. After looking through the FCP manual, I found this quote:
+Note: The SmoothCam filter can be applied only to clips that refer to QuickTime+
+media files. Also, the SmoothCam filter compensates only for the original video+
+within a QuickTime media file; the results of filter and motion parameter settings are+
+ignored. Make sure filters applied to a clip are ordered so that the SmoothCam filter+
+is applied first.+
I decided to post this reply in case anyone else came across this issue. Basically, it appears that SmoothCam will only work on QuickTime files (.mov I guess?). My graphics guy had made the file as an MP4 (again..don't get me started I opened the his MP4 in QT and re-exported it as a .mov and SmoothCam is analyzing it right now! So all is well.
Sorry for the almost unnecessary post. Feel free to comment to expand/clarify my findings.
Thanks!

Same Region across Multiple Pages

Hi There!
Working on a requirement where I need same region across multiple pages.
One way (Hard way) to do it is , repeat the region in all the pages.
Is there any other way (smart way) so that I can write region once and reference it in other pages ? ? ?
Thanks
Krishna

Yes, you can design this form on Page 0. Then this form will apply to every page.

Applying same effect to multiple titles

sorry for the newbie questions (last video stuff I did was using avid and discreet effect many years ago)
I've got a load of titles that I want to apply the same effect to (something like a slide direction blur), I've been poking around to see if I can create the effect on a clip, then replace one title with another OR copy and paste all the clip attributes (including position and transparency) OR create a preset that contains all the effects.
Ideally the solution would enable me to change the effect and update all the titles. Is there a way?

I've got a load of titles that I want to apply the same effect to (something like a slide direction blur), I've been poking around to see if I can create the effect on a clip, then replace one title with another...
You can do this. Copy the title with the applied effect, paste it elsewhere into the sequence, and then hold down the Alt key as you drag the replacement title on to the pasted title. The effect will be preserved, but the clip will be replaced.
OR copy and paste all the clip attributes (including position and transparency)
You can do this, too. Select the clip with the effects in the sequence, either press Ctrl+C or go to Edit > Copy to copy the clip, select one or more target clips, and either press Ctrl+Alt+V or go to Edit > Paste Attributes. All effects and transformations will be pasted to the target clips, without changing the clips themselves.
OR create a preset that contains all the effects...
And you can do this, as well. With the Effects Control Panel open, hold down the Ctrl key and click on the names of all the effects you want to include in the preset. Click the flyout menu (it's the tiny four-stack of pancakes at the upper-right corner of the pane) and select Save Preset. I'll let you figure it out from there
Ideally the solution would enable me to change the effect and update all the titles. Is there a way?
No way to directly do this; any effect or effect preset applied to a clip is an independent instance, and is not connected to the original in any way. However, you could use the preset building process I outlined above to semi-quickly update all your titles. If you've applied an effect or effect preset you don't want any more, select all the clips that are thus effected, and right-click on one of them and select Remove Effects. Tick the options that you want to remove. Then, rebuild your preset, and apply it to your clips again; you can apply a preset to multiple clips by selecting them all and dragging the preset from the effects bin. It's a little bit of a round-about way, but it's about the quickest it can get.

Cropping a clip crops EVERYTHING!

Using 9.0.4 (because 9.0.8 quits constantly for me) I cropped a clip (fit-crop-Ken Burns) to fill the screen, and now every clip in ALL my events & projects have the same crop appearence. WTH! Original video is 4:3 on a widescreen format, as I want. Interestingly, when I quit IM, re-open, event clips are all sized correctly. Until I play a clip, then they all revert back to that cropped look. Something need to be reset?
I went with widescreen because at some point I'll be importing 16:9 video.

in iM's trash bin

How do I apply same adjustments to multiple photos at the same time?

How do I apply same adjustments to multiple photos at the same time?

You can't but you can copy the adjustments made on one photo and apply/paste it onto another by:
1 - Control (right)-clicking one the edited photo in the Edit mode and selecting Copy Adjustsments
2 - Control-clicking on the next photo and selecting Paste Adjustments.
OT

How do use the same crop for multiple images.

I have a number of images that I want to use the same crop on. Instead of go through the whole slow process for each image is there a way to use the same crop for all of the images?
And in iPhoto there was a way to copy the adjustment settings to multiple images, I can't see how to do that in aperture.

Use the "Lift&Stamp" tool:
Crop one image.
Lift the crop using the "Lift" tool.
Select the other images.
Stamp the crop adjustment to all of them.
But caution: By default "Lift" will copy all Metadata tags and all adjustments, but the gps data. If you only want to transfer the cropping rectangle, deselect all lifted items but the crop adjustment before stamping.
Regards
Léonie

I have cropped a clip and now want to take other clips from the remaining footage. But the discarded footage which contains other desirable clips is not in Trash. So, where did it go so I can access it?

I have cropped a clip and now want to take other footage from the discarded remains of the clip. But the discarded footage is not in my iMovie trash. Where did it go? And how do I rescue it so I can edit the other short clips from it that I need?

I don't know how it did it (because I cannot duplicate the results) but one time the finder found a folder on my main hard drive called/Volumes Under that folder are folders called the names of previous external hard drives with numbers following them. /Volumes does not appear on my Mac hard drive. Obviously it is hidden somewhere. But it has content. Most of the time, the file names in that content don't show up in a search, but obviously I have found the content and deleted one huge folder of stuff it has saved. When I found the folder, I immediately opened it, where I found this stuff. But unfortunately when it opened in the search window I went directly to the "drive" folder and had no back arrow, so I couldn't get back to the search that found the content and the mystery /Volumes folder. The finder information window does show /Volumes directly off of the main drive (its not in any other folder). Anybody know where this stuff is hidden or how to get to it.

Camera Raw 8 the same cropping choices as are in Lightroom and Photoshop?

Seriously, how hard would it be to give Camera Raw 8 the same cropping choices as are in Lightroom and Photoshop (i.e., Fibonacci, Triangle, Diagonal, etc.)? This disparity in features is inexcusable and embarrassing. Surely the teams communicate?

I don't have CC nor LR. Just be sure you are comparing apples to apples
That is a nice statement for a Windows guy…
I never use crop in ACR because I like this feature more in PS itself. Also the inability to save crop presets in ACR makes it very limited. The ACR engine for PS and LR are the same, the body differs.
Thanks to hard yelling people we now have about the same crop tool in PS as in LR. Although I still don't like it in PS, after having used it years and years I now have to move the image instead of the crop.
Sadly the ability to rotate crop and having adjust it automatically to the borders is a very nice option. If it wasn't for this I would stay with the old classic mode.
But the OP is right, many features in different Adobe Products have somewhat the same result but sometimes very different approaches, options and tools.
Until the Adobe HQ is going to settle in Utopia we might be better off trying to learn living with it

Can you compare Version to Master at same crop?

The M key for comparing a version to a master is really useful. What it does, however, is zoom from the cropped image version to the uncropped master.
When I compare master to version, I'm really just interested in the color, brightness, etc. of the cropped area--how that compares to the master. Other than unchecking the Crop checkmark and then pressing M (which would compare uncropped images), is there any way to compare a version to a master at the same crop level as the version I'm currently looking at? Would anyone else find this useful?

So many,
There is not a function per se, which does what you want. (I've provided feedback concerning the lack of this function, but that shouldn't stop you from providing feedback to the Aperture team about the same thing.)
A couple weeks ago there was a discussion about this. [http://discussions.apple.com/thread.jspa?messageID=6591395&#6591395]
Sekoya suggested using Alt-G to create a new version from master. You can use that temporarily to compare an edited version with that new unedited version, which is identical to the master. Then you can delete (or undo) the new version.
nathan

Apply same crop across clips

Similar Messages

Maybe you are looking for