Apply @section for half page ?
Hi,
I have a Word rtf -template with for-each@section command. The pdf output has one group of data per page.
Now I should change the template so that the section is half a page and the @section should work just as before but only for half a page. So new group of data should start from the beginning of page or in the middle of page.
Could someone please help with this problem, I'm a newbie in Bi Publisher, so I would appreciate any advice.
Tiina
I tried to insert a continuous section break in the middle of the page, but it didn't make any change.
Tiina
Similar Messages
-
Do not apply Templates for dynamic page
Hi,
When i add a tag <ORACLE> ...</ORACLE> then all code before this tag don't displate.(I have viewed source after apply template but did't see code before Oracle tag).
Could you tell me the way to sovle the problem.
thanks !
thangtkDear Candace ,
- I have a dynamic page that includes oracle tag (<oracle> </oracle>).Run it ok .
-When i apply my template(user template) then dynnamic don't display all component of Template.
-I had viwed source code (dynamic+template) .I only see componet code begin <oracle> to end. (contains HTML outside <oracle>..</oracle>) and all code before <oracle>..</oracle> to lose .
Ex:I have a code
<html>
<head>
<title>
</title>
</head>
<body>
<table>
</table>
<oracle>
begin
htp.init();
htp.p('..');
end;
</oracle>
</body>
</html>
run it anh view source then i only see:
<oracle>
begin
htp.init();
htp.p('..');
end;
</oracle>
</body>
</html>
I lose code.
<html>
<head>
<title>
</title>
</head>
<body>
<table>
</table>
I think that Templates don't display ,the same cause.
I hope you will reply quickly for you.
thanks very much !
(sorry ,I write very bad) -
Hi ,
My application has around 110 pages, most of the pages are public since I made the pages public to save time during debugging.
I have an authentication scheme defined which I have made current.
Now is there a way for me to make all these pages use the current authentication scheme without having to go to each Page->Security->Page requires authentication ?
Just wanted to Know if I was missing some feature in APEX which lets me change together instead of doing it one page at a time.
Thanks in advance,
DippyHi Shijesh,
Thanks for your response.
I already have an authentication scheme defined and which is made current.
But then when I was debugging the application I manually went to the pages and changed the security option to "Page is Public".
Now I want to revert the 100 odd pages to use the current authentication scheme.
Going by your method, I can only select or change the authentication scheme but it does not affect the 100 odd pages that I made public to "Page Requires Authentication"
Now I am having to go to each page => Edit PAge => Security => Page Requires Authentication and I have 115 pages :(
Hope I was able to explain my problem better.
Thanks,
Dippy -
How to apply template page to all pages except for logon page?
Hi,
I created a template page with id 0 that contains some copyright and other basic information of my application. Is there a way to apply this to all pages within my application except for the logon page?
Regards,
TamasIt's possible to make page items or regions conditional on the page not being a page number that you specify.
Head to your page 0, and look for the relevant item in your conditionals list. Select it and specify your login page number in there and all should be well!
Ben -
An error occurred while applying your dashboard selections for this page???
Hi there,
I'm getting this error on the dashboard page.
"An error occurred while applying your dashboard selections for this page" Error Codes: GV3MWW29
It is removed when I click "Clear my selection" from page option.
Is there any other way to remove the error without clicking "Clear My selction" everytime.
ThanksHave you saved your selections by selecting 'Saved Current Selections'? When do you get this error?
There are a few posts in this forum; here's one that may or may not help; take a look if you haven't already..
GV3MWW29 error
Thanks! -
Governer limit for inserting a Custom section in detail page of SOD
HI,
I want to insert multiple custom section in detail page of Siebel on demand objects.
What is the governer limit for insertion of the Custom sections?
Thanks
YashHi Sean,
I am sorry for your confusion. Yes, your understanding is correct.
I tried to add manually and i got the result as 'There can be at most 25 custom web applets in a detail page'. Is this correct?
Thanks
Yash -
My iphone froze on a page for half an hour or so, no reaction and it restarted back on again
I opened a page on safari to type a website, half way when i was typing it froze it would'nt let me click anything and it didn't let me turn off or go back to the home page, the iphone was frozen like this for half an hour or so and afterwards it restarted back on. Then i went on to check the crash reports and it showed up like this.
{"os_version":"iOS 7.1 (11D167)","bug_type":"110"}
Incident Identifier: B85A5DED-7B83-48EB-A97F-33AA71E5EF1C
CrashReporter Key: 66a5bdf70a64705a846b9cde06433306484022fb
Hardware Model: iPhone5,2
Date/Time: 2014-03-18 19:47:39.442 +0100
OS Version: iOS 7.1 (11D167)
panic(cpu 0 caller 0x81da9f1f): "SGX Hang - core 0 waitForMemoryRequests() timed out!"
Debugger message: panic
OS version: 11D167
Kernel version: Darwin Kernel Version 14.0.0: Fri Feb 21 19:33:46 PST 2014; root:xnu-2423.10.67~1/RELEASE_ARM_S5L8950X
Kernel slide: 0x0000000001400000
Kernel text base: 0x81401000
Boot : 0x5324be52 0x00000000
Sleep : 0x53288024 0x00005042
Wake : 0x53288438 0x000001e2
Calendar: 0x532894b4 0x000afb9e
Panicked task 0xc241ac00: 22540 pages, 128 threads: pid 0: kernel_task
panicked thread: 0xc253e9f0, backtrace: 0x8138be28
0x81519cd1
0x8151a87f
0x81404b55
0x81da9f1f
0x81da9623
0x81da9537
0x8148c031
0x81da7297
0x8148bc39
0x8148b28d
0x8148b2dd
0x8141e61c
Task 0xc241ac00: 22540 pages, 128 threads: pid 0: kernel_task
Task 0xc241a950: 283 pages, 3 threads: pid 1: launchd
Task 0xc241a140: 1190 pages, 10 threads: pid 14: UserEventAgent
Task 0xc241a3f0: 1767 pages, 7 threads: pid 15: wifid
Task 0xc2419930: 587 pages, 3 threads: pid 18: timed
Task 0xc2419120: 794 pages, 4 threads: pid 21: mediaremoted
Task 0xc2418910: 477 pages, 2 threads: pid 24: iaptransportd
Task 0xc2418100: 246 pages, 2 threads: pid 27: softwareupdated
Task 0xc2417e50: 5419 pages, 14 threads: pid 28: backboardd
Task 0xc2417ba0: 1179 pages, 2 threads: pid 29: sharingd
Task 0xc2417390: 801 pages, 3 threads: pid 32: mDNSResponder
Task 0xc24170e0: 16341 pages, 17 threads: pid 33: SpringBoard
Task 0xc2416e30: 1048 pages, 2 threads: pid 34: routined
Task 0xc2416b80: 391 pages, 3 threads: pid 35: softwarebehavior
Task 0xc24168d0: 1928 pages, 7 threads: pid 36: assistantd
Task 0xc2416370: 1042 pages, 8 threads: pid 38: aggregated
Task 0xc24158b0: 240 pages, 8 threads: pid 42: syslogd
Task 0xc2415600: 1157 pages, 4 threads: pid 43: aosnotifyd
Task 0xc24150a0: 277 pages, 2 threads: pid 45: keybagd
Task 0xc2414df0: 9156 pages, 22 threads: pid 46: mediaserverd
Task 0xc2414b40: 346 pages, 2 threads: pid 47: powerd
Task 0xc24145e0: 1417 pages, 10 threads: pid 49: ubd
Task 0xc2413dd0: 618 pages, 2 threads: pid 52: lockdownd
Task 0xc2413b20: 2778 pages, 14 threads: pid 53: locationd
Task 0xc24135c0: 1106 pages, 6 threads: pid 55: identityservices
Task 0xc2413310: 1024 pages, 11 threads: pid 56: configd
Task 0xc2413060: 852 pages, 4 threads: pid 57: imagent
Task 0xc2412b00: 1071 paDid you end up solving this ? I have the exact same issue. All this started happening after upgrading to iOS 7.1 :(
-
hello,
I am using report builder 6i. I want print on half page but the printer LQ-300+ uses full page. i want to print two receipts from one pages.
Thanks
iftikharMake sure your frames are set up to handle that kind of printing. Check to make sure that 2 repeating frames will fit into one page. There are properties on the repeating frames and regular frames that can affect this, like "Page Protect", "Page Break Before/After","Maximum Records per Page" or "Space Between Frames" (these are just some). You also might want to check the height and width of you section. You can increase the height until you see 2 show up, that tells you your repeating frame is too big for 2 records for your original height.
-
How to apply license for SSM 7.5 & Netweaver CE 7.1?
How to apply license for SSM 7.5 & Netweaver CE 7.1?
My application server java in SAPMMC: appear message: no valid license found.
Acually we already bought license and download,
So, how to solve this license problem?Chamnap,
When your NetWeaver license expires, it can be restarted, but will only run for 1/2 hour, to allow installing a new license.
Step 1- Start NetWeaver CE from the control console
Step 2 - Log on to NetWeaver Administrator http:///[server]:50000/nwa and go to Configuration tab then Infrastructure sub-tab, then Licenses
Step 3 - Make note of your System Number and Active Hardware Key in the System Parameters section
Step 4 - Navigate to the Service Marketplace http://service.sap.com/licensekey
Step 5 - You are looking for SAP Business Suite - SAP Products with ABAP Stack, Without ABAP stack (WEB AS Java-J2EE Engine) SAP Enterprise Portal link
Step 6 - Fill in your Hardware Key and System # - Make sure you choose this License Type: J2EE Engine - Web Application Server Java (it is not the default selection)
Step 7 - A message at the bottom of the page will note a new key has been generated and you can Download the txt file needed (you also receive an email with the info as well)
Step 8 - (Restart NetWeaver CE - if its timed-out) On the Licenses page of nwa click Install from File > Browse to the txt doc you downloaded and ADD
You now have the new license install. Make note of the date to schedule the time for any future updates, so that service is not interrupted.
If you cannot access the license key on the Service Marketplace you will need to contact your SAP account representative.
Regards,
Bob -
Memo data type displayed half page continued on next page
Post Author: j45c
CA Forum: Crystal Reports
I am currently using crystal report IX which the memo field only displayed half of the page and continued on the next page. I have set can grow = true, keep object together = false and close border on page break = true.Would like to know how should I solve this by having the memo to filled up the rest of the page before continue display on the next page? Thanks in advance.Yes, you can't rely on getting the last entered ID on the next page as it may not be from the same person. I use the Insert-retrieve extension from Tom Muck which does this at the time of insert and stores it in a session variable. But backing up a bit, are 4 different forms really necessary. Most expense form are able to use a single form to capture all pertinent date. I would design a single form, submit it while using the retrieve ID extension, and direct to a summary page. That page would grab the just inserted records, and perform any monetary calculations needed. Also provide a link to an update page, basically a duplicate of the input page but with a recordset and fields Pre-populated. Once it's been input, reviewed and updated if needed, then it can be emailed, printed or exported to what the accounting people need to process it. Future enhancements may include a status indicator that defaults in incomplete. When in this mode, the user can log back in at a later time to complete it. Upon final submission, the record updates to Complete which prevents the user from making further changes. You could also build an admin section for various management tasks, and to enter the status of the request, that would appear in the users profile so they can see if and when they will get paid, or notices that require more info, like receipts.
-
More than half page blank in each page of report.
I am designing CR for Clinical Laboratory.
I have multiple page footers in Crystal Report. Those are suppressed and Suppress Blank section is also checked.These page footers are conditionally (When TestId= X) un suppressed in my report. (For Example when Test Id=18 Suppress is false for Page Footer1 and similarly for other page footers.)
It is working fine. But report have blank space (more than half ) in bottom of page.
please help me.When I suppressed it unconditionally. It works fine. But I need them suppress conditionally.
My formulas are as under
Formula1 (for suppressing Page Footer 1)
if({@LHFSHD}<=0)then
true
else
false
Formula2 (For Suppressing Page Footer 2
if({@LDLHDLD}<=0) then
true
else
false
Formula3 (For Suppressing Page Footer3)
if({@CholestrolD}<=0) then
true
else
false
Formula4(For Suppressing Page Footer 4)
if({@HBAICD}<=0) then
true
else
false
Thanks in advance -
Patches for help pages on Arabic language on R12.1.1
Hi Friends,
I just installed Oracle Apps R12.1.1 and enabled Arabic language also.
I am able to access the Application in Arabic but could see any help pages on Arabic.
i got confused betwwen the patches (Patch 6746000 - Includes base Release 12.0 and 12.1.1 Online help,
Patch 7303031 - Includes 12.1.1 Online help)
Please let me know the list of patches to be applied to get Help pages on Arabic language on newly installed R12.1.1
Regards,
DBHi;
i got confused betwwen the patches (Patch 6746000 - Includes base Release 12.0 and 12.1.1 Online help,
Patch 7303031 - Includes 12.1.1 Online help)
I belive patch 7303031 is enough for Online help:
Please check Note :Oracle Alert Release Notes, Release 12.1.1 [ID 566099.1] this patch strongly recomended.
Also check:
Oracle E-Business Suite Release 12.1.1 Maintenance Pack Installation Instructions [ID 752619.1] Section 2: Applying the Maintenance Pack
iHELP is Not Working After The Upgrade to 12.1.1 : Topic Not Found [ID 848283.1]
R12: Online Help / iHelp Patches [ID 783410.1]
Regard
Helios -
Is it possible to have different headers for each page for the Pages app?
I just purchased the Pages app for my ipad and it happens to be one of the best apps i've ever bought. However, I'm having trouble figuring out how to have different headers for each page of the same document. Is this possible to do?
Tommy,
One of the limitations of Pages for iOS on your iPad is that Pages can't create sections per se. The best you can do is insert page breaks and then assign different columns to that page. The problem comes with the headers and footers - in iOS Pages, the headers and footers apply to the whole document, not the individual sections as you would find in Pages '09 on OSX.
The workaround is to create your document on OSX, insert the needed sections and headers, save, then transfer the Pages document to your iPad either as a working "blank" or as a new document. The headers and footers will reflect the sections you created in OS X, but you won't be able to add any new ones or new sections on your iPad. -
How to change the header and footer in the Section Breaks Next Page using OpenXML?
I have a word document file in which I added a Section Break of Next Page, now I want to change the header and footer of that page.
Scenario of example, I have a doc file which has four pages with headers and footers and added fifth page in the section break next page, I want to change the header and footer of the fifth page only. This is achievable manually by deselecting the Link to Previous
button in the Word Application but I don't know how to change it using XML?
My code that adds the new page in the section breaks is:
class Program
static void Main(string[] args)
string path = @"C:\Riyaz\sample.docx";
string strtxt = "Hello This is done by programmatically";
OpenAndAddTextToWordDocument(path,strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
using (DocX document = DocX.Load(@"C:\Riyaz\sample.docx"))
document.InsertSectionPageBreak();
Paragraph p1 = document.InsertParagraph();
p1.Append("This is new section");
document.Save();
Please help.Here is the sample for your reference:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using DocumentFormat.OpenXml;
using DocumentFormat.OpenXml.Packaging;
using DocumentFormat.OpenXml.Wordprocessing;
namespace WordAddNewFooterHeader
class Program
static void Main(string[] args)
string path = @"E:\Document\TestHeaderandfooter-Copy.docx";
string strtxt = "OpenXML SDK";
OpenAndAddTextToWordDocument(path, strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
// Open a WordprocessingDocument for editing using the filepath.
WordprocessingDocument wordprocessingDocument = WordprocessingDocument.Open(filepath, true);
MainDocumentPart part = wordprocessingDocument.MainDocumentPart;
Body body = part.Document.Body;
//create a new footer Id=rIdf2
FooterPart footerPart2 = part.AddNewPart<FooterPart>("rIdf2");
GenerateFooterPartContent(footerPart2);
//create a new header Id=rIdh2
HeaderPart headerPart2 = part.AddNewPart<HeaderPart>("rIdh2");
GenerateHeaderPartContent(headerPart2);
//replace the attribute of SectionProperties to add new footer and header
SectionProperties lxml = body.GetFirstChild<SectionProperties>();
lxml.GetFirstChild<HeaderReference>().Remove();
lxml.GetFirstChild<FooterReference>().Remove();
HeaderReference headerReference1 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = "rIdh2" };
FooterReference footerReference1 = new FooterReference() { Type = HeaderFooterValues.Default, Id = "rIdf2" };
lxml.Append(headerReference1);
lxml.Append(footerReference1);
//add the correlation of last Paragraph
OpenXmlElement oxl = body.ChildElements.GetItem(body.ChildElements.Count - 2);
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
SectionProperties sectionProperties1 = new SectionProperties() { RsidR = oxl.GetAttribute("rsidR", oxl.NamespaceUri).Value };
HeaderReference headerReference2 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.HeaderParts.FirstOrDefault()) };
FooterReference footerReference2 = new FooterReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.FooterParts.FirstOrDefault()) };
PageSize pageSize1 = new PageSize() { Width = (UInt32Value)12240U, Height = (UInt32Value)15840U };
PageMargin pageMargin1 = new PageMargin() { Top = 1440, Right = (UInt32Value)1440U, Bottom = 1440, Left = (UInt32Value)1440U, Header = (UInt32Value)720U, Footer = (UInt32Value)720U, Gutter = (UInt32Value)0U };
Columns columns1 = new Columns() { Space = "720" };
DocGrid docGrid1 = new DocGrid() { LinePitch = 360 };
sectionProperties1.Append(headerReference2);
sectionProperties1.Append(footerReference2);
sectionProperties1.Append(pageSize1);
sectionProperties1.Append(pageMargin1);
sectionProperties1.Append(columns1);
sectionProperties1.Append(docGrid1);
paragraphProperties1.Append(sectionProperties1);
oxl.InsertAt<ParagraphProperties>(paragraphProperties1, 0);
body.InsertBefore<Paragraph>(GenerateParagraph(txt, oxl.GetAttribute("rsidRDefault", oxl.NamespaceUri).Value), body.GetFirstChild<SectionProperties>());
part.Document.Save();
wordprocessingDocument.Close();
//Generate new Paragraph
public static Paragraph GenerateParagraph(string text, string rsidR)
Paragraph paragraph1 = new Paragraph() { RsidParagraphAddition = rsidR };
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
Tabs tabs1 = new Tabs();
TabStop tabStop1 = new TabStop() { Val = TabStopValues.Left, Position = 5583 };
tabs1.Append(tabStop1);
paragraphProperties1.Append(tabs1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = text;
run1.Append(text1);
Run run2 = new Run();
TabChar tabChar1 = new TabChar();
run2.Append(tabChar1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
paragraph1.Append(run2);
return paragraph1;
static void GenerateHeaderPartContent(HeaderPart hpart)
Header header1 = new Header();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Header" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
header1.Append(paragraph1);
hpart.Header = header1;
static void GenerateFooterPartContent(FooterPart fpart)
Footer footer1 = new Footer();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Footer" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
footer1.Append(paragraph1);
fpart.Footer = footer1;
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to print multiple footers for each page in RTF template xml report.
Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here.
Maybe you are looking for
-
Passing Parameters in URL problem
I have a page where I do some processing. I have created a branch on that page back to the main report page for the app. I have the following on the "Edit Branch" page: Point Branch Point: On Submit: After Processing... Sequence: 10 Action Target typ
-
Why do we need private static method or member class
Dear java gurus, I have a question about the use of private and static key words together in a method or inner class. If we want to hide the method, private is enough. a private static method is sure not intended to be called outside the class. So th
-
Again me with a keyListener question, second alt press does not register
hey, i noticed something was off with the behavior of the application i wrote, and then i checked with the KeyEventDemo.java at http://java.sun.com/docs/books/tutorial/uiswing/events/keylistener.html and i found out that i was correct, when pressing
-
[SOLVED]where I can specify where are my font if not using xorg.conf
where I can specify where are my font if not using xorg.conf thanks Last edited by jccl1706 (2010-04-01 18:06:45)
-
Why has my iTunes account been disabled and why has support failed to reenable it?
On April 17, 2011, I discovered that my iTunes account had been disabled when I tried to update apps that I had purchased. Repeated emails to iTunes support have failed to reenable the account, and now several of my apps are unusable because I cannot