Apply update 7.0.3 to Developer version of InDesign Server

Is there any way i could apply this update to a developer version of InDesign Server?
We have an export PDF problem with our Live InDesign Server which we can replicate on our development server. I would like to apply the update to our development server to see if the problem is resolved with the patch. Does anyone know of a way to do this?
When i try installing the patch i get "Update is not applicable".
Thanks,
Jeremiah

Thanks Francis, I was able to update the developer version of IDS by following your instructions.
You wouldn't happen to know if this same problem will happen on a production version of IDS do you? We will be applying the update to two Production Servers that we have and I'm hoping we don't have to uninstall and reinstall them as well.
Thanks,

Similar Messages

Develop plugin for indesign server

Hi,
i donno if this question is really trivial or if i'm just approaching this the wrong way. I need to develop a plugin that i'll have to run using indesign server. I have been reading the sdk documentations and trying to understand whatever i can. I've also developed the writefishprice plugin, however from what i understand that one won't run in the server. Is there any documentation that i can read that'll get me started on this, right now i feel like i'm between a rock and a hard place. any help will be greatly appreciated.
thanks,
Paul

Hello,
Even I have developed an Indesign server plugin, but I also face the problem in its invokation. I have read " indesign-server-plugin-techniques.pdf". It talks about how to make your plugin so as to make it compatible with indesign server, but doesn't talks about how does the server plugin gets invoked??
Kindly help.

I installed Firefox 4 beta, now that Firefox 4 is released, do I have to download the release version or I can apply updates to make it a release version?

See my question

It will automatically install the release version, though you already appear to have updated to the release version.

Anyone had problems running the debug version of InDesign CS6 Server

Hi Folks,
A number of developers at my firm have tried using the debug version of InDesign Server CS6, but find they cannot run it with the following error:
ERROR [server] Adobe InDesign Server is not properly licensed and will now quit.
In each case the installer ran correctly and a valid serial number for debug CS6 used (from the Adobe Partners site).
We have no problems with the release version of CS6 server, or CS5/CS5.5 debug/release versions.
Has anyone suffered the same problem?
Thanks,
Andrew

Hi Ian,
I had a look and although there was one post suggesting a similar problem, the answer didn't work or was not applicable for the debug version. However I do have an answer - I used a release serial number and it now starts up normally!
Thanks for your reply.
Andrew

Adobe InDesign Server CS4 Trial Version

Hi everyone!
Does anybody know where i can find a working trial version of InDesign Server? Maybe CS4.
Thank you very much in advance

Hello, I'm trying to download the trial version of InDesign Server too...
I get a 404 error page [http://www.adobe.com/special/errorpages/404.html] no one at Adobe seems to know where I can get a trial. Can anyone help??!!
Any help would be great.
Thanks!

Million+ views - SAP Crystal Reports, developer version for MS VS: Updates & Runtime Downloads

1,000,000! One million views in just over three years;
SAP Crystal Reports, developer version for Microsoft Visual Studio Updates & Runtime Downloads;

Re. runtime distribution limits; WIN apps, free. Web apps used internal to your organization, free. Web apps deployed external to your organization, extra licensing applies. Check with sales: 866-681-3435
Worldwide Office Locations | SAP
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

I was recently prompted to update my Itunes player to the latest version. I'm using Windows Vista. I was left with an error message MSVCR80.dll and consequently no new update. I uninstalled the old version and have tried to reinstall manually. No luck

I was recently prompted to update my Itunes player to the latest version. I'm using Windows Vista. I was left with an error message MSVCR80.dll and consequently no new update. I uninstalled the old version and have tried to reinstall manually several times. No luck. Consequently I have no player.
Any ideas for a fix?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Desc not working in SQL Developer Version 1.1.3 Build 27.69

Hi All,
I am using Oracle SQL Developer Version 1.1.3 Build 27.69
select count(*) from abccount(*)
100
using desc / describe table name gives error
desc abcERROR:
ERROR: object abc does not exist
1 rows selected
I am able to perform select on the table but not desc/describe. I tried suffixing with schema name , still the same error persists.
Kindly provide a workaround
Tnx

Well 1.1.3 is quite old.
The best thing to do IMHO is to update to the latest version, it will also enable a load of new features and fixes.
http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html

I am unable to apply updates

Hello, Jeff.
I have the most up-to-date version and am NOT using a proxy, yet I run into this same issue. I'm able to apply updates and otherwise interact with my installed apps but they are unable to connect and verify my subscription which of course just rubs salt in the wound as I would MUCH rather be using a standalone application rather than this buggy cloud version.
Please advise how I can address this issue.
Thank you for you kind attention.

Branching this to a new discussion as the previous discussion was regarding proxy configuration.
Shercohelp can you please provide more details including any relevant error messages you are receiving when you attempt to download and install the software? Also which operating system do you have installed?

ITunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

iTunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

I'm assuming you followed a forum like Gizmodo to load the latest version of iOS 7 Beta on your device
Alot of those forums forget to mention, iTunes 11.0.5 will allow you to update to the iOS 7 Beta but your device will no longer work unless you have the developer version of iTunes as well....
I'd suggest you to research how to downgrade back to 6.1.3/4 and wait a few days for the iOS to be released,

Developer Update for InDesign Server Developers

Hello all,
If you are creating plug-ins for the Creative Suite of Adobe applications, you'll want to attend this ninety minute session for an update on developing plug-ins for Photoshop, Illustrator, InDesign, Bridge, Version Cue, and XMP.
Topics include the C and C++ APIs, Extendscript and other developer details. Dan Brotsky, Chief Architect for the Creative Suite, will discuss highlights of the Version Cue SDK, and the Creative Suite Activation Software. This presentation is not for the technically faint of heart expect high technology at high speed!
This session will be recorded for later review, and a summary document made available for reference.
Who should attend? Any developer that is interested in creating plug-ins for any products in the Creative Suite.
May 3rd. 9:00 am to 10:30 am PST
Free
Online via Acrobat Connect - watch from your desktop - no special software require to participate.
Register at:
http://www.adobe.com/cfusion/event/index.cfm?event=detail&id=883099&loc=en_us
MNR

I have spent some time geting Java automation to work with InDesign, it's not my favorite language but I learned some things that may help and put them into some course content that Adobe should put out shortly; will post here when it is available online.
Our company, Silicon Publishing, provides general InDesign Server automation training, though we don't have a current offering that specifically targets Java we teach some of the basics of working with Java (many unique techniques!) and could arrange a limited form of training.
The documentation and samples with the SDK should take you part of the way there: for specific scripts, it has been helpful to us to get things working in an easier-to-write (i.e. JavaScript) script first, then translate such a script to Java, taking into account the unique characteristics of the language and various tactics (outlined in the SDK documentation) to address these.
Max
Max Dunn
Silicon Publishing
www.siliconpublishing.com
[email protected]

Total No of pages different in report printed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8)

Currently in our application, we are using Crystal Report XI R2 for generating the reports. We are in the process of upgrading the Crystal Report to SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). I updated that on my machine and all the reports work fine. I didn't have to modify any of the reports.
However when comparing the reports, we found that there are few reports on which the total no. of pages differ from the report displayed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). Comparing the reports, it looks all the data that were fit on one page earlier with version XI R2 doesn't fit on the same page with version 13.8, thereby increasing the page counts.
The fonts, page margins everything set on report itself. Nothing being set in the code.
Both the application is using the same report that is pulling the data from the same database. Our application is a web application.
Any suggestion, why this is happening.
Thanks.
Sanjay

I am not sure what is being compared here?
CRXI R2 designer to CRVS?
CR XI R2 in some version of .NET to CRVS?
CR XI R2 using RDC SDK to CRVS?
Also, is this happening on your development computer or after you deploy?
If you compare the the "Page setup" options dialog between reports that work and those that do not work, do you see any difference?
Is this a web or a win app?
Are you seeing the same issue when viewing and exporting - say export to PDF?
What is the printer driver used and it's version?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Yosemite hangs in booting after applying Update 2015-003.

I have applied Update 2015-003 to Yosemite.
After booting the progress bar hangs at about 30% for over an hour.
The hardware is a MacBook Pro with a SSD harddrive.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Can i use FMS developer version for commercial purpose

HI,
Can I use flash media server4 developer version for commercial, if some one have knowledge about scope of the developer version then, please help me.
Thanks
Ram

If you refer to EULA of FMS you will see below text corresponding to Developer License:
.1. Software License. Subject to the terms and conditions of this Agreement, Adobe grants to Licensee a perpetual (except as set forth in Section 15) non-exclusive license to install the Software on one (1) Computer or Virtual Server and use the Software delivered hereunder according to the terms and conditions of this Agreement and the Documentation. Unless indicated otherwise by the License Key (as defined below) provided to Licensee, Licensee shall be deemed to have licensed the Development Server. If Licensee has licensed a Trial Version, in which case Section 2.2 applies, or if Licensee has licensed Not For Resale Software, in which case Section 2.3 applies.
2.1.1. Development Server License. This Section 2.1.1 applies only if Licensee has obtained a valid Development Server license to the Software. In addition to the other terms contained herein, (a) Licensee’s license to the Development Server Software is limited to a maximum number of (i) ten (10) Concurrent Connections when using with the Real Time Media Protocol (RTMP), and (ii) fifty (50) Concurrent Connections when using the Real Time Media Flow Protocol (RTMFP); and (b) Licensee shall not use the Development Server for load balancing. No maintenance and support is available for the Development Server.
So as per EULA you can use Developer Edition for commercial purpose with restriction that it cannot be used for load balancing or creating cluster of Developer Edition Network.
You can refer to this old article when this part of EULA was introduced: http://www.flashcomguru.com/index.cfm/2006/10/9/fmsdevedition

I click apply update on the about firefox window but then cancelled it, now it wont work

Firefox informed me of an update, i applied it but cancelled it when it asked for the admin password. I am now trying to apply it about it just closes down and restarts with out it being applied. My current version is 4.0.1 when i go to the about firefox page it still has 'apply update' everytime.

If the iPod is no longer recognized in iTunes click here. iOS: Device not recognized in iTunes for Windows
In the future when posting for help, please respond to your original question.
https://discussions.apple.com/message/15509978#15509978

Apply update 7.0.3 to Developer version of InDesign Server

Similar Messages

Maybe you are looking for