Applying a change to a selection in Aperture only changes one image

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
If you are attempting to apply a change to a selection of images but the change only effects one of the images there are a couple of possibilities:
# You have Primary Only selected. This setting is found at the lower right hand conner of the main window. It is the middle icon with the 1 on it.
# You are attempting to apply a rating, color label or flag from the Metadata pane of the Inspector. Regardless of the state of the Primary Only button if you set these adjustments from the Metadata pane then only the primary selection is modified. To apply a rating, color label or flag to a selection use the keyboard shortcuts or the *Metadata-> commands*.
This is the 1st version of this tip. It was submitted on February 8, 2011 by Frank Caggiano.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

This tip is ready for consideration and inclusion into the *Aperture Installation, Setup and General Usage* forum.
thanks

Similar Messages

Re: Applying a change to a selection in Aperture only changes one image

Modified title as recommend by Nubz.
This tip is again ready for consideration.

This tip is ready for consideration and inclusion into the *Aperture Installation, Setup and General Usage* forum.
thanks

Can only rotate one image at a time in Aperture

I'm selecting a group of images and want to rotate them all two times counter clock wise (180 degrees). Shouldn't I be able to select all those images and hit the bracket key twice to rotate them all? What's happening is that I'm selecting all these shots but only one is rotating when I hit the bracket keys.
I swore that Aperture let you group rotate images by selecting all the ones you wanted to rotate.
What is going on here?
Antonio

Doh!
That little friggin feature gets me all the time. In fact, this happened over a year ago and I think you're the one that pointed it out to me. It's déjà vu all over again.
Still, it's a little feature that is so easy to forget that it's turned on.
Thanks Ian!
Antonio

How do I change the image resolution of a photo?

Hi..,
     I am the beginner in Photoshop.
     I want to change one image resolution from 72 dpi to 300 dpi.
     So, I search and got one pdf for change the resolution of the image. In that they mention, take the "Printscreen" of the image and paste in the photoshop and change the mode(Index - flatten) and change resolution via the "Image -> image size -> Resolution".
     Like that i did, it changed correctly.
     After that I Open one already saved image file in Photoshop and do that same steps but the resolution was not changed.
So, now how to change that saved image resolution to 300 dpi...??
Regards.,
VISWA

Viswa,
To find the current resolution of your image, follow these steps:
With your image open in Photoshop, Image > Image Size (Like you've already done earlier).
Check the resolution as shown above. If it doesn't show 300, enter 300, hit OK and 'Save' your image.
Open the file and check again. If it still shows 72, post back with more details of the type of file you're trying to open in Photoshop and if possible, a screenshot so we can help.
-ST

I have thousands of pdf and need to change an image that is the same at all.

Hi,
I have thousands of pdf and need to change one image that is the same at all.
Is it possible to do this automatically?
Thanks.

The image is the same size, but not in the same position
Thanks

If I select multiple images to apply a change to all Aperture it does so only with the first selected. Why?

If I select multiple images to apply a change to all openings it does so only with the first selected. Why?

You probably have Primary Selection only on.
Aperture identifies the images you’ve selected by displaying them with a white border. When you select a group of images, the actively selected image, called the primary selection, appears with a thick white border and the rest of the selected images appear with thin white borders.
Primary Only button: Click this button to make changes to the primary image selection only.

You SHOULD be able to apply batch changes just by selecting multiple images

Don't get me wrong, i love lift/stamp. It's very helpful.
BUT, I really hate the fact that in Aperture you can't just drag-select a group of images and then either apply adjustments to all of them, or –more often– keywords.
Why does Aperture keep you from doing this?
At the very least, you should have the OPTION in PREFS to do this. Or not.

I'm sorry you are having difficulty.
It's simple: you select multiple images, right?. One has a thick white border and the others have thin ones. But, even though you have multiple images selected, if you input keywords, or other metadata, or an adjustment from the Inspector, it only applies to the "primary" image.
There should be an option to have that be the case... OR, if you want, to apply whatever adjustment from the INSPECTOR you choose... and have that be applied to those multiple images.
"...why would anyone be likely to want to see each single adjustment step applied to a large number of images before settling on the preferred combination?"
Because everyone's not you.
I just shot 100+ table tops that were VERY similar lighting / angles / etc. And I needed to comp them out for the client ASAP. The technique I described would've saved me a lot of time. Instead I had to do ONE image of the mini-batches, and then lift/stamp the rest. When it would've been so much easier for me to drag-select the 8, or 15 in a group, and assign them all keywords at the same time, and do some adjustments. Bam. Quicker.
Oh, and per the "what is the universe" question? You don't have to look any further than Apple's own operating system to see this "crazy" and "unique" technique in action: go to FINDER, select multiple items of folder (drag around them), and then CTRL-Click and choose a label color. Viola! ALL the items become that color.
Like I said, I'm only suggesting Apple provide the OPTION of working this way. And it IS the norm in most operating system / program environments.
In fact, watch the Lynda.com vid on Aperture 3: the MetaData portion, the guy drag-selects a bunch of images and says "...now, you'd THINK you could just enter some keywords for these similar images and have them stick... you'd be wrong. You have to use lift/stamp for that. For some odd reason."

Is there a way to change the image numbers in a file in Aperture?

Is there a way to change the image numbers in a file in Aperture? We shoot with two photographers and so the img numbers are not in order but I would like to have the photos in chronological order on the disc when I give it to them. Does anyone know how to do this? I have them all in order ready to go in Aperture but when I move them to the disc to be burned they default back to the img number order. Thanks for your help!

What do you mean by "image number"? The file names like "IMG_7822.CR2" or "IMG_7822.jpg"?
You can create custom names with appended numbers, when you export your image files to be saved on a disk.
Sort your images by date in the browser, select them, then use the command "File > Export > Version" to write the files to the disk. Set the name format to "Custem Name with Index" or "Custom Name with Counter" to create numbered names in your current sort order.
Regards
Léonie

Syncing iphone: Itunes says settings have changed, asks if i want to apply these changes, but no changes have been made?

Itunes 11.3, but this has happened for quite a while, several versions at least. Iphone 5, Ipad 2, this happens with both devices. I sync locally to my macbook pro (late 2011 version, running 10.9.4), using a wired connection.
I will have the 2 devices hooked up via the factory supplied cords. Doesn't actually matter if it's both or just one device. If I have, for instance, the iphone selected via the sidebar, and am displaying the Summary tab, normally you have a sync button to the lower right. Quite often, this will randomly change to two buttons, - Apply, Don't apply, as if I have made settings changes or something, although I haven't. No changes have been made. If I select a different device in the sidebar of itunes, a pop up will open asking me if I want to apply the changes? I say no, all is good. BUT - it's annoying!
Is there any way to make this stop?

No-one? Am I the only one? I doubt it...

Cannot apply artwork/changes manually to albums...

Latest iTunes is set to "automatically get album artwork" but I have a few hundred that it could not find. When I try to apply it manually (right click/select all/get info/double click album artwork) or even change the genre of the album, I get all the changes set, then when I press OK, it does nothing. It doesn't apply the artwork that I put in the box and it doesn't apply any other changes. It just sits there! Any suggestions on how to rectify?
I never had this problem w/ the older version & I've downloaded this newest one twice in an effort to make it work.

muld00n wrote:
None of the files are marked Read Only & I do have full Read/Write permission.
I would double check this - the symptom you describe normally has this cause. Apologies if I'm restating what you know to be obvious but just in case....
As well as the Read-Only flag your files may have security permissions that prevent you from making changes. This is most common if your data is on an NTFS drive that has moved from one Windows installation to another. In order to fix them, however, you first have to be able to find them.
*Missing Security Tab in Windows XP*
If you have Windows XP, and your hard drive is formatted as NTFS, you can set permissions on files so that only users you specify can access them. However, if your Windows XP computer is not part of a Domain on a network, you may notice that there is no Security tab when you right-click a file and choose Properties.
To reveal the Security tab follow these steps:
1. Open Windows Explorer, and choose Folder Options from the Tools menu.
2. On the View tab, scroll to the bottom of the Advanced Settings and clear the check box next to "Use Simple File Sharing."
3. Click OK to apply the change, and you should now have a Security tab when viewing the properties of a file or folder on an NTFS volume.
*Fixing Permissions*
Right-click on your top-level iTunes folder, click Properties. On the General tab clear the Read-only box if checked, then switch to the Security tab. Make sure that your own account (or Everyone) and SYSTEM have Full Control. Apply the changes. If for some reason you are not allowed to apply the change you should be able to use your administrator status to take ownership of the folder after which you will be able to modify the security permissions.
tt2

How to apply List box for multiple selection of rows in ALV report ?

Hi Exprots,
1: How to apply List box for multiple selection of rows in ALV report ?
Thanking you.
Subash

hi,
check the below program.
REPORT zalv_dropdowns.
*Type pools declarations for ALV
TYPE-POOLS : slis.
*data declarations for ALV container,ALV grid, Fieldcatalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      gs_layout TYPE lvc_s_layo.*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
      wa_outtab TYPE t517a.
START-OF-SELECTION.*Call to ALV
CALL SCREEN 600.*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
PERFORM alv_output.
ENDMODULE.                    "pbo OUTPUT
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
ENDMODULE.                    "pai INPUT
*&      Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'T517A'
    CHANGING
      ct_fieldcat      = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
   WHEN 'SLART'.
*is the first list box
        ls_fcat-drdn_hndl = '1'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
is the second list box
WHEN 'ABART'.
        ls_fcat-drdn_hndl = '2'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.                    "build_fieldcat
*&      Form ALV_OUTPUT
FORM alv_output .*Create object for container
CREATE OBJECT g_custom_container
         EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
         EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      is_layout       = gs_layout
    CHANGING
      it_fieldcatalog = gt_fieldcat
      it_outtab       = gt_outtab.ENDFORM.                               "ALV_OUTPUT
*&      Form dropdown_table
      text
--> p1        text
<-- p2        text
FORM dropdown_table.*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
        ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Primary school'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Lower Secondary'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Upper Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Professional School'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 College'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 University'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Establishment'.
APPEND ls_dropdown TO lt_dropdown.* Second ABART listbox (handle '2'). ls_dropdown-handle = '2'.
ls_dropdown-value = '10 Primary School certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '20 Lower secondary/Junior high'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '30 High school diploma(B-levels)'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '31 Vocational'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '32 Matriculation'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '40 Specialist vocational certificate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '50 College degree Level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '51 College degree Level2'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '52 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '60 Univ Degree level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '61 Bachelors degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '62 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '63 Licenciate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '64 Doctors Degree Ph.D'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '89 None'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '90 Unknown'.
APPEND ls_dropdown TO lt_dropdown.*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
    EXPORTING
      it_drop_down = lt_dropdown.ENDFORM.                               " dropdown_table
*&      Form build_layout
      text
*layout for ALV output
FORM build_layout . gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.ENDFORM.                    " build_layout
endform.
Edited by: S.r.v.r.Kumar on Jun 1, 2009 2:48 PM

"one or more of the items in your selection contains Aperture albums that are not supported in iphoto".

I have some folders in iPhoto called 'Recovered Folder'. When I try to delete them I get this message: "one or more of the items in your selection contains Aperture albums that are not supported in iphoto".
I don't use Aperture (did install it to try it out), and have deleted Aperture App from my Mac.
How can I get rid of these fodlers?

i finally figured this out:
fyi, iphoto and aperture can now share (i.e., access) the same library. apple details it here:
http://support.apple.com/kb/HT5260?viewlocale=en_US&locale=en_US
i use both iphoto and aperture, and i suspect something went amiss, at some point, while aperture was accessing my iphoto library.
this is how i fixed the problem:
i launched aperture, then (per the instructions linked above) switched to (i.e., accessed) my iphoto library. i was then able to delete the "recovered folder" and the album it contained. i then quit aperture and relaunched iphoto.
NOTE: at that time, although i expected the "recovered folder" to be gone, it was still present. but this time, i was able to delete the folder from within iphoto without the "contains aperture items" error message.
(Sparky030405, i realize you've since deleted aperture. while i can't say my method is the *only* way to solve this problem, it's the way i was able to solve it. so, you might consider reinstalling aperture in order to delete the folder, then uninstalling aperture, once again.)

When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer" most of which are years old and many are recurring events. I'm afraid to proceed

When syncing iPod touch to MacBook, I have selected to sync only events newer than 360 days. Yet I get message that sync will change 8000 events on "this computer" most of which are years old and many are recurring events. I'm afraid to proceed with sync.

Having the same problem here. As a first time mac user, Apple has certainly made a bad first impression.
For me, the issue seems to occur when transferring files between computers that are connected to the same access point (when transferring files from wired computers on the network there is no issue). My vista laptop and every laptop I have tried has worked perfectly fine with this access point so I am 100% convinced it is the mac. Basically when I copy the files, after about 100mb, I am unable to access anything on the local network or internet until I restart Airport. The weird thing is that even though I am unable to access anything, the airport utility says it is connected. I might also note that the wireless signal strength is full.
If I can't get this figured out in a few days, this computer is going back to the store where it came from and I will officially label myself anti-mac. This type of issue is just unacceptable for something so main stream.

Reporting Error while Restart to apply Recent Changes in OBIEE 11g in EM

Hi Friends,
I tried to open my rpd in online mode in OBIEE 11g, For that i went into EM for getting my rpd updated...
So after all doing changes, I need to restart for applying changes, so I restarted the system components
But only 80% of it started, remaining 20% is showing error and these are the error details
"Restart failed with 2 errors: problems reported by coreapplication_obis1, coreapplication
see detailed logs for more information"..
The above is the error message that i got..
The below are the log messages that reported error
Message type: Error
Message ID : -
Message : SEVERE:Element type:BI_instance,element_id:coreapplication,operation result:failed_to_start, detail Message-Error in starting one or more components of Bi instance; please check the server log files for detailed information..
Target : biadmin services(11.1.1)(Admin server)
Target type : application deployment
Log files : Admin server_diagnostic.log
Message type: Error
Message ID : -
Message : SEVERE:element type:process, element Id: coreapplication_obis1, operation result: failed_to_start, detail message- operation failed: start; oracle instance: instance4; component; coreapplication_obis1;msg: 0 of 1 processes started..
Target : biadmin services(11.1.1)(Admin server)
Target type : application deployment
Log files : Admin server_diagnostic.log
Message type : Error
Message ID : EM-02694
Message : Supplementary information regarding operation: BI_instance:coreapplication; failed_to_start; error in starting one or more components of BI instance; please check server log files for detailed information..
Target : em(Admin server)
Target type : application deployment
Log files : emoms.log
Message type : Error
Message ID : EM-02694
Message : Supplementary information regarding operation: PROCESS:coreapplication_obis1; failed_to_start; operation failed: start; oracle instance:instance4;component:coreapplication_obis1;msg 0 of 1 processes started..
Target : em(Admin server)
Target type : application deployment
Log files : emoms.log
how to solve these errors, because of this i couldn't able to open my repository in online mode as well as cannot able to update my .rpd file in presentation services in obiee 11g..
I couldn't able to understand the error that is pointing to me....
Help me friends..........
Regards,
Harry...

It's myself harry and i solved this problem, since this problem occurred for me as i tried to update my repository.rpd file for more than 5 times because of the error that it reported to me in my previous post...
How i solved this error means, i deleted all the other .rpd files(out of 5 i deleted 4) and i made some changes in my rpd file in the administration tool and after that i tried to update my rpd in EM..
Once it updated, then i gave restart to apply recent changes, after that my system components tempt to work as of 100%...
Anyway friends thanks for your views.....
Cheers
Harry...
Edited by: HariPrasad on Nov 13, 2010 2:59 AM

How to apply the changes in logical standby database

Hi,
I am new to Dataguard. I am now using 10.2.0.3 and followed the steps from Oracle Data Guard Concepts and Administration Guide to setup a logical standby database.
When I insert a record to a table from the primary database side, when i query the same table from the logical standby database, it doesn't show the new records.
Did I miss something? What I want to do is when I insert a record in the primary db, then the corresponding record will be inserted in the standby db.
Or I totally misunderstand what Oracle data guard is? Any help are appreciated.
Denis

Hi
Can anyone help to answer me is my logical standby db have a archive gap?
SQL> SELECT APPLIED_SCN, APPLIED_TIME, READ_SCN, READ_TIME, NEWEST_SCN, NEWEST_T
IME FROM DBA_LOGSTDBY_PROGRESS;
APPLIED_SCN APPLIED_TIME READ_SCN READ_TIME NEWEST_SCN
NEWEST_TIME
851821 29-JUL -08 17:58:29 851822 29-JUL -08 17:58:29 1551238
08-AUG -08 08:43:29
SQL> select pid, type, status, high_scn from v$logstdby;
no rows selected
SQL> alter database start logical standby apply;
Database altered.
SQL> select pid, type, status, high_scn from v$logstdby;
PID
TYPE
STATUS HIGH_SCN
2472
COORDINATOR
ORA-16116: no work available
3380
READER
ORA-16127: stalled waiting for additiona 852063
l transactions to be applied
2480
BUILDER
ORA-16116: no work available
2492
ANALYZER
ORA-16111: log mining and apply setting
up
2496
APPLIER
ORA-16116: no work available
2500
APPLIER
ORA-16116: no work available
3700
APPLIER
ORA-16116: no work available
940
APPLIER
ORA-16116: no work available
2504
APPLIER
ORA-16116: no work available
9 rows selected.
Thanks a lot.
Message was edited by:
Denis Chan

Applying a change to a selection in Aperture only changes one image

Similar Messages

Maybe you are looking for